[openwrt/openwrt] kernel: add Qualcomm NSS dataplane ethernet driver
LEDE Commits
lede-commits at lists.infradead.org
Mon Jan 16 03:52:58 PST 2023
ansuel pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/2558e7b443d08dfdf4a93948e0e56e4f6a4c98f7
commit 2558e7b443d08dfdf4a93948e0e56e4f6a4c98f7
Author: Robert Marko <robimarko at gmail.com>
AuthorDate: Sat Aug 20 12:39:26 2022 +0200
kernel: add Qualcomm NSS dataplane ethernet driver
Qualcomm NSS-DP is as its name says Qualcomms ethernet driver for the NSS
subsystem (Networking subsystem) built-into various Qualcomm SoCs.
It has 2 modes of operation:
* Without NSS FW and rest of code required for offloading
This is the one that we will use as the amount of kernel patching required
for NSS offloading and the fact that its not upstreamable at all makes it
unusable for us.
Driver in this mode is rather basic, it currently only offers NAPI GRO
(Added by us as part of the fixup) and basically relies on the powerfull
CPU to get good throughput.
* With NSS FW and rest of code required for offloading
In this mode, driver just registers the interfaces and hooks them into
NSS-ECM to allow offloading.
This mode is not viable for use in OpenWrt due to reasons already described
above.
This driver is required for ipq807x to have wired networking until a better
one is available, so lets add the fixed-up version for 5.15 for now.
Signed-off-by: Robert Marko <robimarko at gmail.com>
---
package/kernel/qca-nss-dp/Makefile | 57 +++++++
...x-support-newer-kernels-time-stamping-API.patch | 44 +++++
...-make-phy-mode-code-compatible-with-newer.patch | 48 ++++++
.../0003-Drop-_nocache-variants-of-ioremap.patch | 48 ++++++
.../0004-EDMA-Fix-NAPI-packet-counting.patch | 31 ++++
...-EDMA-Use-NAPI_POLL_WEIGHT-as-NAPI-weight.patch | 41 +++++
.../0006-NSS-DP-fix-of_get_mac_address.patch | 46 ++++++
.../0007-NSS-DP-implement-ethernet-IOCTL-s.patch | 29 ++++
...witchdev-remove-the-transaction-structure.patch | 48 ++++++
.../0009-switchdev-use-new-switchdev-flags.patch | 51 ++++++
.../patches/0010-switchdev-fix-FDB-roaming.patch | 110 +++++++++++++
...x-confusing-printing-of-registered-netdev.patch | 41 +++++
...gmac-syn-xgmac-silence-debug-log-on-probe.patch | 23 +++
...-Use-a-phy-handle-property-to-connect-to-.patch | 182 +++++++++++++++++++++
...14-nss-dp-edma-v1-use-NAPI-GRO-by-default.patch | 63 +++++++
...nss-dp-allow-setting-netdev-name-from-DTS.patch | 55 +++++++
16 files changed, 917 insertions(+)
diff --git a/package/kernel/qca-nss-dp/Makefile b/package/kernel/qca-nss-dp/Makefile
new file mode 100644
index 0000000000..e9d9706141
--- /dev/null
+++ b/package/kernel/qca-nss-dp/Makefile
@@ -0,0 +1,57 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=qca-nss-dp
+PKG_RELEASE:=1
+
+PKG_SOURCE_URL:=https://git.codelinaro.org/clo/qsdk/oss/lklm/nss-dp.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_DATE:=2022-04-30
+PKG_SOURCE_VERSION:=72e9ec4187414461cbcf6ccff100e8b5ebe5f40b
+PKG_MIRROR_HASH:=805f16e59c75511132922f97740ebf6bf953845b0bbfd2089c4615456893bb37
+
+PKG_BUILD_PARALLEL:=1
+PKG_FLAGS:=nonshared
+
+include $(INCLUDE_DIR)/kernel.mk
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/qca-nss-dp
+ SECTION:=kernel
+ CATEGORY:=Kernel modules
+ SUBMENU:=Network Devices
+ DEPENDS:=@TARGET_ipq807x +kmod-qca-ssdk
+ TITLE:=Qualcom NSS dataplane ethernet driver
+ FILES:=$(PKG_BUILD_DIR)/qca-nss-dp.ko
+ AUTOLOAD:=$(call AutoLoad,31,qca-nss-dp,1)
+endef
+
+define KernelPackage/qca-nss-dp/Description
+ NSS dataplane ethernet driver for Qualcom SoCs.
+endef
+
+define Build/InstallDev
+ mkdir -p $(1)/usr/include/qca-nss-dp
+ $(CP) $(PKG_BUILD_DIR)/exports/* $(1)/usr/include/qca-nss-dp/
+endef
+
+EXTRA_CFLAGS+= \
+ -I$(STAGING_DIR)/usr/include/qca-ssdk
+
+NSS_DP_HAL_DIR:=$(PKG_BUILD_DIR)/hal
+define Build/Configure
+ $(LN) $(NSS_DP_HAL_DIR)/soc_ops/$(CONFIG_TARGET_BOARD)/nss_$(CONFIG_TARGET_BOARD).h \
+ $(PKG_BUILD_DIR)/exports/nss_dp_arch.h
+endef
+
+define Build/Compile
+ +$(MAKE) -C "$(LINUX_DIR)" \
+ CROSS_COMPILE="$(TARGET_CROSS)" \
+ ARCH="$(LINUX_KARCH)" \
+ M="$(PKG_BUILD_DIR)" \
+ EXTRA_CFLAGS="$(EXTRA_CFLAGS)" SoC="$(CONFIG_TARGET_BOARD)" \
+ $(KERNEL_MAKE_FLAGS) \
+ $(PKG_JOBS) \
+ modules
+endef
+
+$(eval $(call KernelPackage,qca-nss-dp))
diff --git a/package/kernel/qca-nss-dp/patches/0001-edma_tx_rx-support-newer-kernels-time-stamping-API.patch b/package/kernel/qca-nss-dp/patches/0001-edma_tx_rx-support-newer-kernels-time-stamping-API.patch
new file mode 100644
index 0000000000..1fed4ba8ab
--- /dev/null
+++ b/package/kernel/qca-nss-dp/patches/0001-edma_tx_rx-support-newer-kernels-time-stamping-API.patch
@@ -0,0 +1,44 @@
+From 40979666b4371012405715ffa61ab5760fcdc6b3 Mon Sep 17 00:00:00 2001
+Message-Id: <40979666b4371012405715ffa61ab5760fcdc6b3.1620066716.git.baruch at tkos.co.il>
+From: Baruch Siach <baruch at tkos.co.il>
+Date: Mon, 3 May 2021 20:07:36 +0300
+Subject: [PATCH 1/3] edma_tx_rx: support newer kernels time stamping API
+
+---
+ hal/dp_ops/edma_dp/edma_v1/edma_tx_rx.c | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+--- a/hal/dp_ops/edma_dp/edma_v1/edma_tx_rx.c
++++ b/hal/dp_ops/edma_dp/edma_v1/edma_tx_rx.c
+@@ -227,10 +227,16 @@ void nss_phy_tstamp_rx_buf(__attribute__
+ * set to the correct PTP class value by calling ptp_classify_raw
+ * in drv->rxtstamp function.
+ */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(5, 6, 0))
+ if (ndev && ndev->phydev && ndev->phydev->drv &&
+ ndev->phydev->drv->rxtstamp)
+ if(ndev->phydev->drv->rxtstamp(ndev->phydev, skb, 0))
+ return;
++#else
++ if (ndev && phy_has_rxtstamp(ndev->phydev))
++ if (phy_rxtstamp(ndev->phydev, skb, 0))
++ return;
++#endif
+
+ netif_receive_skb(skb);
+ }
+@@ -248,9 +254,14 @@ void nss_phy_tstamp_tx_buf(struct net_de
+ * set to the correct PTP class value by calling ptp_classify_raw
+ * in the drv->txtstamp function.
+ */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(5, 6, 0))
+ if (ndev && ndev->phydev && ndev->phydev->drv &&
+ ndev->phydev->drv->txtstamp)
+ ndev->phydev->drv->txtstamp(ndev->phydev, skb, 0);
++#else
++ if (ndev && phy_has_txtstamp(ndev->phydev))
++ phy_rxtstamp(ndev->phydev, skb, 0);
++#endif
+ }
+ EXPORT_SYMBOL(nss_phy_tstamp_tx_buf);
+
diff --git a/package/kernel/qca-nss-dp/patches/0002-nss_dp_main-make-phy-mode-code-compatible-with-newer.patch b/package/kernel/qca-nss-dp/patches/0002-nss_dp_main-make-phy-mode-code-compatible-with-newer.patch
new file mode 100644
index 0000000000..04adad86f6
--- /dev/null
+++ b/package/kernel/qca-nss-dp/patches/0002-nss_dp_main-make-phy-mode-code-compatible-with-newer.patch
@@ -0,0 +1,48 @@
+From cef7873a2d77df13ee702d902ed4e06b2248904b Mon Sep 17 00:00:00 2001
+Message-Id: <cef7873a2d77df13ee702d902ed4e06b2248904b.1620066716.git.baruch at tkos.co.il>
+In-Reply-To: <40979666b4371012405715ffa61ab5760fcdc6b3.1620066716.git.baruch at tkos.co.il>
+References: <40979666b4371012405715ffa61ab5760fcdc6b3.1620066716.git.baruch at tkos.co.il>
+From: Baruch Siach <baruch at tkos.co.il>
+Date: Mon, 3 May 2021 20:17:22 +0300
+Subject: [PATCH 2/3] nss_dp_main: make phy mode code compatible with newer
+ kernels
+
+---
+ include/nss_dp_dev.h | 4 ++--
+ nss_dp_main.c | 4 ++++
+ 2 files changed, 6 insertions(+), 2 deletions(-)
+
+--- a/include/nss_dp_dev.h
++++ b/include/nss_dp_dev.h
+@@ -22,7 +22,7 @@
+ #include <linux/etherdevice.h>
+ #include <linux/netdevice.h>
+ #include <linux/platform_device.h>
+-#include <linux/switch.h>
++#include <linux/phy.h>
+ #include <linux/version.h>
+
+ #include "nss_dp_api_if.h"
+@@ -99,7 +99,7 @@ struct nss_dp_dev {
+ /* Phy related stuff */
+ struct phy_device *phydev; /* Phy device */
+ struct mii_bus *miibus; /* MII bus */
+- uint32_t phy_mii_type; /* RGMII/SGMII/QSGMII */
++ phy_interface_t phy_mii_type; /* RGMII/SGMII/QSGMII */
+ uint32_t phy_mdio_addr; /* Mdio address */
+ bool link_poll; /* Link polling enable? */
+ uint32_t forced_speed; /* Forced speed? */
+--- a/nss_dp_main.c
++++ b/nss_dp_main.c
+@@ -584,7 +584,11 @@ static int32_t nss_dp_of_get_pdata(struc
+ hal_pdata->netdev = netdev;
+ hal_pdata->macid = dp_priv->macid;
+
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(5, 5, 0))
+ dp_priv->phy_mii_type = of_get_phy_mode(np);
++#else
++ of_get_phy_mode(np, &dp_priv->phy_mii_type);
++#endif
+ dp_priv->link_poll = of_property_read_bool(np, "qcom,link-poll");
+ if (of_property_read_u32(np, "qcom,phy-mdio-addr",
+ &dp_priv->phy_mdio_addr) && dp_priv->link_poll) {
diff --git a/package/kernel/qca-nss-dp/patches/0003-Drop-_nocache-variants-of-ioremap.patch b/package/kernel/qca-nss-dp/patches/0003-Drop-_nocache-variants-of-ioremap.patch
new file mode 100644
index 0000000000..18bd85c8c3
--- /dev/null
+++ b/package/kernel/qca-nss-dp/patches/0003-Drop-_nocache-variants-of-ioremap.patch
@@ -0,0 +1,48 @@
+From c8c52512ff48bee578901c381a42f027e79eadf9 Mon Sep 17 00:00:00 2001
+Message-Id: <c8c52512ff48bee578901c381a42f027e79eadf9.1620066716.git.baruch at tkos.co.il>
+In-Reply-To: <40979666b4371012405715ffa61ab5760fcdc6b3.1620066716.git.baruch at tkos.co.il>
+References: <40979666b4371012405715ffa61ab5760fcdc6b3.1620066716.git.baruch at tkos.co.il>
+From: Baruch Siach <baruch at tkos.co.il>
+Date: Mon, 3 May 2021 20:20:29 +0300
+Subject: [PATCH 3/3] Drop _nocache variants of ioremap()
+
+Recent kernels removed them.
+---
+ hal/dp_ops/edma_dp/edma_v1/edma_data_plane.c | 2 +-
+ hal/gmac_ops/qcom/qcom_if.c | 2 +-
+ hal/gmac_ops/syn/xgmac/syn_if.c | 2 +-
+ 3 files changed, 3 insertions(+), 3 deletions(-)
+
+--- a/hal/dp_ops/edma_dp/edma_v1/edma_data_plane.c
++++ b/hal/dp_ops/edma_dp/edma_v1/edma_data_plane.c
+@@ -279,7 +279,7 @@ int edma_init(void)
+ /*
+ * Remap register resource
+ */
+- edma_hw.reg_base = ioremap_nocache((edma_hw.reg_resource)->start,
++ edma_hw.reg_base = ioremap((edma_hw.reg_resource)->start,
+ resource_size(edma_hw.reg_resource));
+ if (!edma_hw.reg_base) {
+ pr_warn("Unable to remap EDMA register memory.\n");
+--- a/hal/gmac_ops/qcom/qcom_if.c
++++ b/hal/gmac_ops/qcom/qcom_if.c
+@@ -418,7 +418,7 @@ static void *qcom_init(struct nss_gmac_h
+ qhd->nghd.mac_id = gmacpdata->macid;
+
+ /* Populate the mac base addresses */
+- qhd->nghd.mac_base = devm_ioremap_nocache(&dp_priv->pdev->dev,
++ qhd->nghd.mac_base = devm_ioremap(&dp_priv->pdev->dev,
+ res->start, resource_size(res));
+ if (!qhd->nghd.mac_base) {
+ netdev_dbg(ndev, "ioremap fail.\n");
+--- a/hal/gmac_ops/syn/xgmac/syn_if.c
++++ b/hal/gmac_ops/syn/xgmac/syn_if.c
+@@ -432,7 +432,7 @@ static void *syn_init(struct nss_gmac_ha
+
+ /* Populate the mac base addresses */
+ shd->nghd.mac_base =
+- devm_ioremap_nocache(&dp_priv->pdev->dev, res->start,
++ devm_ioremap(&dp_priv->pdev->dev, res->start,
+ resource_size(res));
+ if (!shd->nghd.mac_base) {
+ netdev_dbg(ndev, "ioremap fail.\n");
diff --git a/package/kernel/qca-nss-dp/patches/0004-EDMA-Fix-NAPI-packet-counting.patch b/package/kernel/qca-nss-dp/patches/0004-EDMA-Fix-NAPI-packet-counting.patch
new file mode 100644
index 0000000000..f7653729a0
--- /dev/null
+++ b/package/kernel/qca-nss-dp/patches/0004-EDMA-Fix-NAPI-packet-counting.patch
@@ -0,0 +1,31 @@
+From d74920e2a7c413ef40eed72f9cf287cf6fbd5fb8 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko at gmail.com>
+Date: Thu, 20 May 2021 14:56:46 +0200
+Subject: [PATCH 1/2] EDMA: Fix NAPI packet counting
+
+There is a bug in the NAPI packet counting that will
+cause NAPI over budget warnings.
+
+Signed-off-by: Baruch Siach <baruch at tkos.co.il>
+Signed-off-by: Robert Marko <robimarko at gmail.com>
+---
+ hal/dp_ops/edma_dp/edma_v1/edma_tx_rx.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/hal/dp_ops/edma_dp/edma_v1/edma_tx_rx.c
++++ b/hal/dp_ops/edma_dp/edma_v1/edma_tx_rx.c
+@@ -459,12 +459,12 @@ int edma_napi(struct napi_struct *napi,
+
+ for (i = 0; i < ehw->txcmpl_rings; i++) {
+ txcmpl_ring = &ehw->txcmpl_ring[i];
+- work_done += edma_clean_tx(ehw, txcmpl_ring);
++ edma_clean_tx(ehw, txcmpl_ring);
+ }
+
+ for (i = 0; i < ehw->rxfill_rings; i++) {
+ rxfill_ring = &ehw->rxfill_ring[i];
+- work_done += edma_alloc_rx_buffer(ehw, rxfill_ring);
++ edma_alloc_rx_buffer(ehw, rxfill_ring);
+ }
+
+ /*
diff --git a/package/kernel/qca-nss-dp/patches/0005-EDMA-Use-NAPI_POLL_WEIGHT-as-NAPI-weight.patch b/package/kernel/qca-nss-dp/patches/0005-EDMA-Use-NAPI_POLL_WEIGHT-as-NAPI-weight.patch
new file mode 100644
index 0000000000..9c22fa7904
--- /dev/null
+++ b/package/kernel/qca-nss-dp/patches/0005-EDMA-Use-NAPI_POLL_WEIGHT-as-NAPI-weight.patch
@@ -0,0 +1,41 @@
+From 44a30d94abcbb10aacc21db29be212518a6b1bf7 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko at gmail.com>
+Date: Thu, 20 May 2021 14:57:46 +0200
+Subject: [PATCH] EDMA: Use NAPI_POLL_WEIGHT as NAPI weight
+
+Currently a weight of 100 is used by the EDMA, according
+to upstream max of 64 should be used and that is used for
+almost any driver.
+
+They also introduced NAPI_POLL_WEIGHT define which equals
+to 64.
+
+So use NAPI_POLL_WEIGHT as the weight.
+
+Signed-off-by: Robert Marko <robimarko at gmail.com>
+---
+ hal/dp_ops/edma_dp/edma_v1/edma_data_plane.c | 2 +-
+ hal/dp_ops/edma_dp/edma_v1/edma_data_plane.h | 1 -
+ 2 files changed, 1 insertion(+), 2 deletions(-)
+
+--- a/hal/dp_ops/edma_dp/edma_v1/edma_data_plane.c
++++ b/hal/dp_ops/edma_dp/edma_v1/edma_data_plane.c
+@@ -837,7 +837,7 @@ static int edma_register_netdevice(struc
+ */
+ if (!edma_hw.napi_added) {
+ netif_napi_add(netdev, &edma_hw.napi, edma_napi,
+- EDMA_NAPI_WORK);
++ NAPI_POLL_WEIGHT);
+ /*
+ * Register the interrupt handlers and enable interrupts
+ */
+--- a/hal/dp_ops/edma_dp/edma_v1/edma_data_plane.h
++++ b/hal/dp_ops/edma_dp/edma_v1/edma_data_plane.h
+@@ -26,7 +26,6 @@
+ #define EDMA_RX_PREHDR_SIZE (sizeof(struct edma_rx_preheader))
+ #define EDMA_TX_PREHDR_SIZE (sizeof(struct edma_tx_preheader))
+ #define EDMA_RING_SIZE 128
+-#define EDMA_NAPI_WORK 100
+ #define EDMA_START_GMACS NSS_DP_HAL_START_IFNUM
+ #define EDMA_MAX_GMACS NSS_DP_HAL_MAX_PORTS
+ #define EDMA_TX_PKT_MIN_SIZE 33 /* IPQ807x EDMA needs a minimum packet size of 33 bytes */
diff --git a/package/kernel/qca-nss-dp/patches/0006-NSS-DP-fix-of_get_mac_address.patch b/package/kernel/qca-nss-dp/patches/0006-NSS-DP-fix-of_get_mac_address.patch
new file mode 100644
index 0000000000..1d7b49129f
--- /dev/null
+++ b/package/kernel/qca-nss-dp/patches/0006-NSS-DP-fix-of_get_mac_address.patch
@@ -0,0 +1,46 @@
+From cadeb62a42296563141d6954eec58e34ef86778d Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko at gmail.com>
+Date: Fri, 13 Aug 2021 20:12:08 +0200
+Subject: [PATCH] NSS-DP: fix of_get_mac_address()
+
+Recently OpenWrt backported the updated of_get_mac_address()
+function which returns and error code instead.
+
+So, patch the SSDK to use it and fix the compilation error.
+
+Signed-off-by: Robert Marko <robimarko at gmail.com>
+---
+ nss_dp_main.c | 13 ++++---------
+ 1 file changed, 4 insertions(+), 9 deletions(-)
+
+--- a/nss_dp_main.c
++++ b/nss_dp_main.c
+@@ -555,9 +555,10 @@ static int32_t nss_dp_of_get_pdata(struc
+ struct net_device *netdev,
+ struct nss_gmac_hal_platform_data *hal_pdata)
+ {
+- uint8_t *maddr;
++ u8 maddr[ETH_ALEN];
+ struct nss_dp_dev *dp_priv;
+ struct resource memres_devtree = {0};
++ int ret;
+
+ dp_priv = netdev_priv(netdev);
+
+@@ -600,14 +601,8 @@ static int32_t nss_dp_of_get_pdata(struc
+ of_property_read_u32(np, "qcom,forced-speed", &dp_priv->forced_speed);
+ of_property_read_u32(np, "qcom,forced-duplex", &dp_priv->forced_duplex);
+
+- maddr = (uint8_t *)of_get_mac_address(np);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(5, 4, 0))
+- if (IS_ERR((void *)maddr)) {
+- maddr = NULL;
+- }
+-#endif
+-
+- if (maddr && is_valid_ether_addr(maddr)) {
++ ret = of_get_mac_address(np, maddr);
++ if (!ret && is_valid_ether_addr(maddr)) {
+ ether_addr_copy(netdev->dev_addr, maddr);
+ } else {
+ random_ether_addr(netdev->dev_addr);
diff --git a/package/kernel/qca-nss-dp/patches/0007-NSS-DP-implement-ethernet-IOCTL-s.patch b/package/kernel/qca-nss-dp/patches/0007-NSS-DP-implement-ethernet-IOCTL-s.patch
new file mode 100644
index 0000000000..824f18634b
--- /dev/null
+++ b/package/kernel/qca-nss-dp/patches/0007-NSS-DP-implement-ethernet-IOCTL-s.patch
@@ -0,0 +1,29 @@
+From 5da62ba19f554bf437752a44360fb5ae9f1a7f5e Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko at gmail.com>
+Date: Tue, 8 Mar 2022 10:48:32 +0100
+Subject: [PATCH] NSS-DP: implement ethernet IOCTL-s
+
+Since kernel 5.15 ethernet/PHY related IOCTL-s have been split from the
+generic IOCTL netdev op.
+So, implement the new op instead of the generic one which is considered
+for private IOCTL-s only now for 5.15+.
+
+Signed-off-by: Robert Marko <robimarko at gmail.com>
+---
+ nss_dp_main.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/nss_dp_main.c
++++ b/nss_dp_main.c
+@@ -532,7 +532,11 @@ static const struct net_device_ops nss_d
+ .ndo_set_mac_address = nss_dp_set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = nss_dp_change_mtu,
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(5, 15, 0))
+ .ndo_do_ioctl = nss_dp_do_ioctl,
++#else
++ .ndo_eth_ioctl = nss_dp_do_ioctl,
++#endif
+
+ #if (LINUX_VERSION_CODE < KERNEL_VERSION(4, 5, 0))
+ .ndo_bridge_setlink = switchdev_port_bridge_setlink,
diff --git a/package/kernel/qca-nss-dp/patches/0008-switchdev-remove-the-transaction-structure.patch b/package/kernel/qca-nss-dp/patches/0008-switchdev-remove-the-transaction-structure.patch
new file mode 100644
index 0000000000..220be961ab
--- /dev/null
+++ b/package/kernel/qca-nss-dp/patches/0008-switchdev-remove-the-transaction-structure.patch
@@ -0,0 +1,48 @@
+From c9afdcdd2642485a6476906be9da2e811090fc7a Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko at gmail.com>
+Date: Fri, 18 Mar 2022 18:06:03 +0100
+Subject: [PATCH] switchdev: remove the transaction structure
+
+Since 5.12 there is no transaction structure anymore, so drop it for
+5.12 and newer.
+
+Signed-off-by: Robert Marko <robimarko at gmail.com>
+---
+ nss_dp_switchdev.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/nss_dp_switchdev.c
++++ b/nss_dp_switchdev.c
+@@ -279,13 +279,19 @@ void nss_dp_switchdev_setup(struct net_d
+ * Sets attributes
+ */
+ static int nss_dp_port_attr_set(struct net_device *dev,
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(5, 12, 0))
+ const struct switchdev_attr *attr,
+ struct switchdev_trans *trans)
++#else
++ const struct switchdev_attr *attr)
++#endif
+ {
+ struct nss_dp_dev *dp_priv = (struct nss_dp_dev *)netdev_priv(dev);
+
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(5, 12, 0))
+ if (switchdev_trans_ph_prepare(trans))
+ return 0;
++#endif
+
+ switch (attr->id) {
+ case SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS:
+@@ -309,8 +315,12 @@ static int nss_dp_switchdev_port_attr_se
+ {
+ int err;
+
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(5, 12, 0))
+ err = nss_dp_port_attr_set(netdev, port_attr_info->attr,
+ port_attr_info->trans);
++#else
++ err = nss_dp_port_attr_set(netdev, port_attr_info->attr);
++#endif
+
+ port_attr_info->handled = true;
+ return notifier_from_errno(err);
diff --git a/package/kernel/qca-nss-dp/patches/0009-switchdev-use-new-switchdev-flags.patch b/package/kernel/qca-nss-dp/patches/0009-switchdev-use-new-switchdev-flags.patch
new file mode 100644
index 0000000000..ecc84c1741
--- /dev/null
+++ b/package/kernel/qca-nss-dp/patches/0009-switchdev-use-new-switchdev-flags.patch
@@ -0,0 +1,51 @@
+From f95868d54301c0f54e968ec9d978c9caa02ee425 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko at gmail.com>
+Date: Fri, 18 Mar 2022 18:24:18 +0100
+Subject: [PATCH] switchdev: use new switchdev flags
+
+Since kernel 5.12 switched utilizes a new way of setting the flags by
+using a dedicated structure with flags and mask.
+
+So fix using kernels 5.12 and later.
+
+Signed-off-by: Robert Marko <robimarko at gmail.com>
+---
+ include/nss_dp_dev.h | 7 +++++++
+ nss_dp_switchdev.c | 2 +-
+ 2 files changed, 8 insertions(+), 1 deletion(-)
+
+--- a/include/nss_dp_dev.h
++++ b/include/nss_dp_dev.h
+@@ -24,6 +24,9 @@
+ #include <linux/platform_device.h>
+ #include <linux/phy.h>
+ #include <linux/version.h>
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(5, 12, 0))
++#include <net/switchdev.h>
++#endif
+
+ #include "nss_dp_api_if.h"
+ #include "nss_dp_hal_if.h"
+@@ -126,7 +129,11 @@ struct nss_dp_dev {
+ /* switchdev related attributes */
+ #ifdef CONFIG_NET_SWITCHDEV
+ u8 stp_state; /* STP state of this physical port */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(5, 12, 0))
+ unsigned long brport_flags; /* bridge port flags */
++#else
++ struct switchdev_brport_flags brport_flags; /* bridge port flags */
++#endif
+ #endif
+ uint32_t rx_page_mode; /* page mode for Rx processing */
+ uint32_t rx_jumbo_mru; /* Jumbo mru value for Rx processing */
+--- a/nss_dp_switchdev.c
++++ b/nss_dp_switchdev.c
+@@ -296,7 +296,7 @@ static int nss_dp_port_attr_set(struct n
+ switch (attr->id) {
+ case SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS:
+ dp_priv->brport_flags = attr->u.brport_flags;
+- netdev_dbg(dev, "set brport_flags %lu\n", attr->u.brport_flags);
++ netdev_dbg(dev, "set brport_flags %lu\n", attr->u.brport_flags.val);
+ return 0;
+ case SWITCHDEV_ATTR_ID_PORT_STP_STATE:
+ return nss_dp_stp_state_set(dp_priv, attr->u.stp_state);
diff --git a/package/kernel/qca-nss-dp/patches/0010-switchdev-fix-FDB-roaming.patch b/package/kernel/qca-nss-dp/patches/0010-switchdev-fix-FDB-roaming.patch
new file mode 100644
index 0000000000..19395ac42c
--- /dev/null
+++ b/package/kernel/qca-nss-dp/patches/0010-switchdev-fix-FDB-roaming.patch
@@ -0,0 +1,110 @@
+From d16102cad769f430144ca8094d928762b445e9b0 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko at gmail.com>
+Date: Fri, 18 Mar 2022 22:02:01 +0100
+Subject: [PATCH] switchdev: fix FDB roaming
+
+Try and solve the roaming issue by trying to replicate what NSS bridge
+module is doing, but by utilizing switchdev FDB notifiers instead of
+adding new notifiers to the bridge code.
+
+We register a new non-blocking switchdev notifier and simply wait for
+notification, and then process the SWITCHDEV_FDB_DEL_TO_DEVICE
+notifications.
+
+Those tell us that a certain FDB entry should be removed, then a VSI ID
+is fetched for the physical PPE port and using that VSI ID and the
+notification provided MAC adress existing FDB entry gets removed.
+
+Signed-off-by: Robert Marko <robimarko at gmail.com>
+---
+ nss_dp_switchdev.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 61 insertions(+)
+
+--- a/nss_dp_switchdev.c
++++ b/nss_dp_switchdev.c
+@@ -24,6 +24,8 @@
+ #include "nss_dp_dev.h"
+ #include "fal/fal_stp.h"
+ #include "fal/fal_ctrlpkt.h"
++#include "fal/fal_fdb.h"
++#include "ref/ref_vsi.h"
+
+ #define NSS_DP_SWITCH_ID 0
+ #define NSS_DP_SW_ETHTYPE_PID 0 /* PPE ethtype profile ID for slow protocols */
+@@ -348,10 +350,64 @@ static int nss_dp_switchdev_event(struct
+ return NOTIFY_DONE;
+ }
+
++static int nss_dp_switchdev_fdb_del_event(struct net_device *netdev,
++ struct switchdev_notifier_fdb_info *fdb_info)
++{
++ struct nss_dp_dev *dp_priv = (struct nss_dp_dev *)netdev_priv(netdev);
++ fal_fdb_entry_t entry;
++ a_uint32_t vsi_id;
++ sw_error_t rv;
++
++ netdev_dbg(netdev, "FDB DEL %pM port %d\n", fdb_info->addr, dp_priv->macid);
++
++ rv = ppe_port_vsi_get(NSS_DP_SWITCH_ID, dp_priv->macid, &vsi_id);
++ if (rv) {
++ netdev_err(netdev, "cannot get VSI ID for port %d\n", dp_priv->macid);
++ return notifier_from_errno(rv);
++ }
++
++ memset(&entry, 0, sizeof(entry));
++ memcpy(&entry.addr, fdb_info->addr, ETH_ALEN);
++ entry.fid = vsi_id;
++
++ rv = fal_fdb_entry_del_bymac(NSS_DP_SWITCH_ID, &entry);
++ if (rv) {
++ netdev_err(netdev, "FDB entry delete failed with MAC %pM and fid %d\n",
++ &entry.addr, entry.fid);
++ return notifier_from_errno(rv);
++ }
++
++ return notifier_from_errno(rv);
++}
++
++static int nss_dp_fdb_switchdev_event(struct notifier_block *nb,
++ unsigned long event, void *ptr)
++{
++ struct net_device *dev = switchdev_notifier_info_to_dev(ptr);
++
++ /*
++ * Handle switchdev event only for physical devices
++ */
++ if (!nss_dp_is_phy_dev(dev)) {
++ return NOTIFY_DONE;
++ }
++
++ switch (event) {
++ case SWITCHDEV_FDB_DEL_TO_DEVICE:
++ return nss_dp_switchdev_fdb_del_event(dev, ptr);
++ }
++
++ return NOTIFY_DONE;
++}
++
+ static struct notifier_block nss_dp_switchdev_notifier = {
+ .notifier_call = nss_dp_switchdev_event,
+ };
+
++static struct notifier_block nss_dp_switchdev_fdb_notifier = {
++ .notifier_call = nss_dp_fdb_switchdev_event,
++};
++
+ static bool switch_init_done;
+
+ /*
+@@ -366,6 +422,11 @@ void nss_dp_switchdev_setup(struct net_d
+ return;
+ }
+
++ err = register_switchdev_notifier(&nss_dp_switchdev_fdb_notifier);
++ if (err) {
++ netdev_dbg(dev, "%px:Failed to register switchdev FDB notifier\n", dev);
++ }
++
+ err = register_switchdev_blocking_notifier(&nss_dp_switchdev_notifier);
+ if (err) {
+ netdev_dbg(dev, "%px:Failed to register switchdev notifier\n", dev);
diff --git a/package/kernel/qca-nss-dp/patches/0011-treewide-fix-confusing-printing-of-registered-netdev.patch b/package/kernel/qca-nss-dp/patches/0011-treewide-fix-confusing-printing-of-registered-netdev.patch
new file mode 100644
index 0000000000..726ca304df
--- /dev/null
+++ b/package/kernel/qca-nss-dp/patches/0011-treewide-fix-confusing-printing-of-registered-netdev.patch
@@ -0,0 +1,41 @@
+From 7e4ae2d6285095794d73d2f2ce61404f61d4e633 Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth at gmail.com>
+Date: Tue, 17 May 2022 15:55:36 +0200
+Subject: [PATCH 11/11] treewide: fix confusing printing of registered netdev
+
+Net core implementation changed and now printing the netdev name cause
+confusing printing if done before register_netdev. Move the old printing
+to dbg and add an additional info log right after register_netdev to
+give the user some info on correct nss-dp probe.
+
+Signed-off-by: Ansuel Smith <ansuelsmth at gmail.com>
+---
+ hal/dp_ops/edma_dp/edma_v1/edma_data_plane.c | 4 ++--
+ nss_dp_main.c | 3 +++
+ 2 files changed, 5 insertions(+), 2 deletions(-)
+
+--- a/hal/dp_ops/edma_dp/edma_v1/edma_data_plane.c
++++ b/hal/dp_ops/edma_dp/edma_v1/edma_data_plane.c
+@@ -822,8 +822,8 @@ static int edma_register_netdevice(struc
+ return -EINVAL;
+ }
+
+- netdev_info(netdev, "nss_dp_edma: Registering netdev %s(qcom-id:%d) with EDMA\n",
+- netdev->name, macid);
++ netdev_dbg(netdev, "nss_dp_edma: Registering netdev %s(qcom-id:%d) with EDMA\n",
++ netdev->name, macid);
+
+ /*
+ * We expect 'macid' to correspond to ports numbers on
+--- a/nss_dp_main.c
++++ b/nss_dp_main.c
+@@ -875,6 +875,9 @@ static int32_t nss_dp_probe(struct platf
+ goto phy_setup_fail;
+ }
+
++ netdev_info(netdev, "Registered netdev %s(qcom-id:%d)\n",
++ netdev->name, port_id);
++
+ dp_global_ctx.nss_dp[dp_priv->macid - 1] = dp_priv;
+ dp_global_ctx.slowproto_acl_bm = 0;
+
diff --git a/package/kernel/qca-nss-dp/patches/0012-gmac-syn-xgmac-silence-debug-log-on-probe.patch b/package/kernel/qca-nss-dp/patches/0012-gmac-syn-xgmac-silence-debug-log-on-probe.patch
new file mode 100644
index 0000000000..3c1c8ab83b
--- /dev/null
+++ b/package/kernel/qca-nss-dp/patches/0012-gmac-syn-xgmac-silence-debug-log-on-probe.patch
@@ -0,0 +1,23 @@
+From fee52ef165e9fab2fca15492677082fd8e9e891f Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth at gmail.com>
+Date: Thu, 19 May 2022 23:40:24 +0200
+Subject: [PATCH 12/12] gmac: syn: xgmac: silence debug log on probe
+
+Silence debug log set as info in xgmac port probe.
+
+Signed-off-by: Ansuel Smith <ansuelsmth at gmail.com>
+---
+ hal/gmac_ops/syn/xgmac/syn_if.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/hal/gmac_ops/syn/xgmac/syn_if.c
++++ b/hal/gmac_ops/syn/xgmac/syn_if.c
+@@ -445,7 +445,7 @@ static void *syn_init(struct nss_gmac_ha
+
+ spin_lock_init(&shd->nghd.slock);
+
+- netdev_info(ndev, "ioremap OK.Size 0x%x Ndev base 0x%lx macbase 0x%px\n",
++ netdev_dbg(ndev, "ioremap OK.Size 0x%x Ndev base 0x%lx macbase 0x%px\n",
+ gmacpdata->reg_len,
+ ndev->base_addr,
+ shd->nghd.mac_base);
diff --git a/package/kernel/qca-nss-dp/patches/0013-nss_dp_main-Use-a-phy-handle-property-to-connect-to-.patch b/package/kernel/qca-nss-dp/patches/0013-nss_dp_main-Use-a-phy-handle-property-to-connect-to-.patch
new file mode 100644
index 0000000000..ba9b8ef262
--- /dev/null
+++ b/package/kernel/qca-nss-dp/patches/0013-nss_dp_main-Use-a-phy-handle-property-to-connect-to-.patch
@@ -0,0 +1,182 @@
+From 8293a26ca56ee2e9a88e4efb5dcc7f647803cd8c Mon Sep 17 00:00:00 2001
+From: Alexandru Gagniuc <mr.nuke.me at gmail.com>
+Date: Sun, 5 Jun 2022 21:45:09 -0500
+Subject: [PATCH] nss_dp_main: Use a 'phy-handle' property to connect to the
+ PHY
+
+The original method of connecting a PHY to the ethernet controller
+requires the "qcom,link-poll", and "qcom,phy-mdio-addr" devicetree
+properties. This is redundant. The PHY node already contains the MDIO
+address, and attaching a PHY implies "link-poll".
+
+Allow using a "phy-handle" property. Remove the following properties,
+as they are no longer used:
+ * "qcom,link-poll"
+ * "qcom,phy-mdio-addr"
+ * "mdio-bus"
+ * "qcom,forced-speed"
+ * "qcom,forced-duplex"
+
+Signed-off-by: Alexandru Gagniuc <mr.nuke.me at gmail.com>
+---
+ include/nss_dp_dev.h | 5 +--
+ nss_dp_main.c | 91 +++++---------------------------------------
+ 2 files changed, 10 insertions(+), 86 deletions(-)
+
+--- a/include/nss_dp_dev.h
++++ b/include/nss_dp_dev.h
+@@ -100,13 +100,10 @@ struct nss_dp_dev {
+ unsigned long drv_flags; /* Driver specific feature flags */
+
+ /* Phy related stuff */
++ struct device_node *phy_node;
+ struct phy_device *phydev; /* Phy device */
+ struct mii_bus *miibus; /* MII bus */
+ phy_interface_t phy_mii_type; /* RGMII/SGMII/QSGMII */
+- uint32_t phy_mdio_addr; /* Mdio address */
+- bool link_poll; /* Link polling enable? */
+- uint32_t forced_speed; /* Forced speed? */
+- uint32_t forced_duplex; /* Forced duplex? */
+ uint32_t link_state; /* Current link state */
+ uint32_t pause; /* Current flow control settings */
+
+--- a/nss_dp_main.c
++++ b/nss_dp_main.c
+@@ -399,7 +399,7 @@ static int nss_dp_open(struct net_device
+
+ netif_start_queue(netdev);
+
+- if (!dp_priv->link_poll) {
++ if (!dp_priv->phydev) {
+ /* Notify data plane link is up */
+ if (dp_priv->data_plane_ops->link_state(dp_priv->dpc, 1)) {
+ netdev_dbg(netdev, "Data plane set link failed\n");
+@@ -576,6 +576,8 @@ static int32_t nss_dp_of_get_pdata(struc
+ return -EFAULT;
+ }
+
++ dp_priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
++
+ if (of_property_read_u32(np, "qcom,mactype", &hal_pdata->mactype)) {
+ pr_err("%s: error reading mactype\n", np->name);
+ return -EFAULT;
+@@ -594,16 +596,6 @@ static int32_t nss_dp_of_get_pdata(struc
+ #else
+ of_get_phy_mode(np, &dp_priv->phy_mii_type);
+ #endif
+- dp_priv->link_poll = of_property_read_bool(np, "qcom,link-poll");
+- if (of_property_read_u32(np, "qcom,phy-mdio-addr",
+- &dp_priv->phy_mdio_addr) && dp_priv->link_poll) {
+- pr_err("%s: mdio addr required if link polling is enabled\n",
+- np->name);
+- return -EFAULT;
+- }
+-
+- of_property_read_u32(np, "qcom,forced-speed", &dp_priv->forced_speed);
+- of_property_read_u32(np, "qcom,forced-duplex", &dp_priv->forced_duplex);
+
+ ret = of_get_mac_address(np, maddr);
+ if (!ret && is_valid_ether_addr(maddr)) {
+@@ -636,50 +628,6 @@ static int32_t nss_dp_of_get_pdata(struc
+ return 0;
+ }
+
+-/*
+- * nss_dp_mdio_attach()
+- */
+-static struct mii_bus *nss_dp_mdio_attach(struct platform_device *pdev)
+-{
+- struct device_node *mdio_node;
+- struct platform_device *mdio_plat;
+- struct ipq40xx_mdio_data *mdio_data;
+-
+- /*
+- * Find mii_bus using "mdio-bus" handle.
+- */
+- mdio_node = of_parse_phandle(pdev->dev.of_node, "mdio-bus", 0);
+- if (mdio_node) {
+- return of_mdio_find_bus(mdio_node);
+- }
+-
+- mdio_node = of_find_compatible_node(NULL, NULL, "qcom,qca-mdio");
+- if (!mdio_node) {
+- mdio_node = of_find_compatible_node(NULL, NULL,
+- "qcom,ipq40xx-mdio");
+- if (!mdio_node) {
+- dev_err(&pdev->dev, "cannot find mdio node by phandle\n");
+- return NULL;
+- }
+- }
+-
+- mdio_plat = of_find_device_by_node(mdio_node);
+- if (!mdio_plat) {
+- dev_err(&pdev->dev, "cannot find platform device from mdio node\n");
+- of_node_put(mdio_node);
+- return NULL;
+- }
+-
+- mdio_data = dev_get_drvdata(&mdio_plat->dev);
+- if (!mdio_data) {
+- dev_err(&pdev->dev, "cannot get mii bus reference from device data\n");
+- of_node_put(mdio_node);
+- return NULL;
+- }
+-
+- return mdio_data->mii_bus;
+-}
+-
+ #ifdef CONFIG_NET_SWITCHDEV
+ /*
+ * nss_dp_is_phy_dev()
+@@ -738,7 +686,6 @@ static int32_t nss_dp_probe(struct platf
+ struct device_node *np = pdev->dev.of_node;
+ struct nss_gmac_hal_platform_data gmac_hal_pdata;
+ int32_t ret = 0;
+- uint8_t phy_id[MII_BUS_ID_SIZE + 3];
+ #if defined(NSS_DP_PPE_SUPPORT)
+ uint32_t vsi_id;
+ fal_port_t port_id;
+@@ -813,37 +760,17 @@ static int32_t nss_dp_probe(struct platf
+
+ dp_priv->drv_flags |= NSS_DP_PRIV_FLAG(INIT_DONE);
+
+- if (dp_priv->link_poll) {
+- dp_priv->miibus = nss_dp_mdio_attach(pdev);
+- if (!dp_priv->miibus) {
+- netdev_dbg(netdev, "failed to find miibus\n");
+- goto phy_setup_fail;
+- }
+- snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
+- dp_priv->miibus->id, dp_priv->phy_mdio_addr);
+-
++ if (dp_priv->phy_node) {
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+-
+- dp_priv->phydev = phy_connect(netdev, phy_id,
+- &nss_dp_adjust_link,
+- dp_priv->phy_mii_type);
++ dp_priv->phydev = of_phy_connect(netdev, dp_priv->phy_node,
++ &nss_dp_adjust_link, 0,
++ dp_priv->phy_mii_type);
+ if (IS_ERR(dp_priv->phydev)) {
+- netdev_dbg(netdev, "failed to connect to phy device\n");
++ dev_err(&pdev->dev, "Could not attach to PHY\n");
+ goto phy_setup_fail;
+ }
+
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(4, 5, 0))
+- dp_priv->phydev->advertising |=
+- (ADVERTISED_Pause | ADVERTISED_Asym_Pause);
+- dp_priv->phydev->supported |=
+- (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+-#else
+- linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, dp_priv->phydev->advertising);
+- linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, dp_priv->phydev->advertising);
+-
+- linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, dp_priv->phydev->supported);
+- linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, dp_priv->phydev->supported);
+-#endif
++ phy_attached_info(dp_priv->phydev);
+ }
+
+ #if defined(NSS_DP_PPE_SUPPORT)
diff --git a/package/kernel/qca-nss-dp/patches/0014-nss-dp-edma-v1-use-NAPI-GRO-by-default.patch b/package/kernel/qca-nss-dp/patches/0014-nss-dp-edma-v1-use-NAPI-GRO-by-default.patch
new file mode 100644
index 0000000000..3683b4ec4c
--- /dev/null
+++ b/package/kernel/qca-nss-dp/patches/0014-nss-dp-edma-v1-use-NAPI-GRO-by-default.patch
@@ -0,0 +1,63 @@
+From ae4fe8fb79b68f4cf4a887434ab6a8a9a1c65bfc Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko at gmail.com>
+Date: Thu, 23 Jun 2022 14:18:50 +0200
+Subject: [PATCH] nss-dp: edma-v1: use NAPI GRO by default
+
+Utilize napi_gro_receive instead of plain netif_receive_skb on EDMA v1.
+
+Usually it provides quite a lot of RX speed improvements, however in some
+cases it may lead to decreased performance as there is no checksum
+offloading implemented.
+
+In cases where reduced performance is experienced its possible to disable
+GRO by using ethtool.
+
+Signed-off-by: Robert Marko <robimarko at gmail.com>
+---
+ hal/dp_ops/edma_dp/edma_v1/edma_data_plane.c | 10 ++++++----
+ hal/dp_ops/edma_dp/edma_v1/edma_tx_rx.c | 8 ++++++--
+ 2 files changed, 12 insertions(+), 6 deletions(-)
+
+diff --git a/hal/dp_ops/edma_dp/edma_v1/edma_data_plane.c b/hal/dp_ops/edma_dp/edma_v1/edma_data_plane.c
+index 1d748db..e81c461 100644
+--- a/hal/dp_ops/edma_dp/edma_v1/edma_data_plane.c
++++ b/hal/dp_ops/edma_dp/edma_v1/edma_data_plane.c
+@@ -589,10 +589,12 @@ drop:
+ */
+ static void edma_if_set_features(struct nss_dp_data_plane_ctx *dpc)
+ {
+- /*
+- * TODO - add flags to support HIGHMEM/cksum offload VLAN
+- * the features are enabled.
+- */
++ struct net_device *netdev = dpc->dev;
++
++ netdev->features |= NETIF_F_GRO;
++ netdev->hw_features |= NETIF_F_GRO;
++ netdev->vlan_features |= NETIF_F_GRO;
++ netdev->wanted_features |= NETIF_F_GRO;
+ }
+
+ /* TODO - check if this is needed */
+diff --git a/hal/dp_ops/edma_dp/edma_v1/edma_tx_rx.c b/hal/dp_ops/edma_dp/edma_v1/edma_tx_rx.c
+index 5780a30..a002a79 100644
+--- a/hal/dp_ops/edma_dp/edma_v1/edma_tx_rx.c
++++ b/hal/dp_ops/edma_dp/edma_v1/edma_tx_rx.c
+@@ -410,8 +410,12 @@ static uint32_t edma_clean_rx(struct edma_hw *ehw,
+ if (unlikely(EDMA_RXPH_SERVICE_CODE_GET(rxph) ==
+ NSS_PTP_EVENT_SERVICE_CODE))
+ nss_phy_tstamp_rx_buf(ndev, skb);
+- else
+- netif_receive_skb(skb);
++ else {
++ if (likely(ndev->features & NETIF_F_GRO))
++ napi_gro_receive(&ehw->napi, skb);
++ else
++ netif_receive_skb(skb);
++ }
+
+ next_rx_desc:
+ /*
+--
+2.38.1
+
diff --git a/package/kernel/qca-nss-dp/patches/0015-nss-dp-allow-setting-netdev-name-from-DTS.patch b/package/kernel/qca-nss-dp/patches/0015-nss-dp-allow-setting-netdev-name-from-DTS.patch
new file mode 100644
index 0000000000..b1aebc268f
--- /dev/null
+++ b/package/kernel/qca-nss-dp/patches/0015-nss-dp-allow-setting-netdev-name-from-DTS.patch
@@ -0,0 +1,55 @@
+From 358b93e40d0c6b6d381fe0e9d2a63c45a10321b3 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko at gmail.com>
+Date: Sun, 4 Dec 2022 18:41:36 +0100
+Subject: [PATCH] nss-dp: allow setting netdev name from DTS
+
+Allow reading the desired netdev name from DTS like DSA allows and then
+set it as the netdev name during registration.
+
+If label is not defined, simply fallback to kernel ethN enumeration.
+
+Signed-off-by: Robert Marko <robimarko at gmail.com>
+---
+ nss_dp_main.c | 17 ++++++++++++++---
+ 1 file changed, 14 insertions(+), 3 deletions(-)
+
+diff --git a/nss_dp_main.c b/nss_dp_main.c
+index 18e1088..19e14fb 100644
+--- a/nss_dp_main.c
++++ b/nss_dp_main.c
+@@ -685,18 +685,29 @@ static int32_t nss_dp_probe(struct platform_device *pdev)
+ struct nss_dp_dev *dp_priv;
+ struct device_node *np = pdev->dev.of_node;
+ struct nss_gmac_hal_platform_data gmac_hal_pdata;
++ const char *name = of_get_property(np, "label", NULL);
+ int32_t ret = 0;
++ int assign_type;
+ #if defined(NSS_DP_PPE_SUPPORT)
+ uint32_t vsi_id;
+ fal_port_t port_id;
+ #endif
+
++ if (name) {
++ assign_type = NET_NAME_PREDICTABLE;
++ } else {
++ name = "eth%d";
++ assign_type = NET_NAME_ENUM;
++ }
++
+ /* TODO: See if we need to do some SoC level common init */
+
+- netdev = alloc_etherdev_mqs(sizeof(struct nss_dp_dev),
+- NSS_DP_NETDEV_TX_QUEUE_NUM, NSS_DP_NETDEV_RX_QUEUE_NUM);
++ netdev = alloc_netdev_mqs(sizeof(struct nss_dp_dev),
++ name, assign_type,
++ ether_setup,
++ NSS_DP_NETDEV_TX_QUEUE_NUM, NSS_DP_NETDEV_RX_QUEUE_NUM);
+ if (!netdev) {
+- pr_info("alloc_etherdev() failed\n");
++ dev_err(&pdev->dev, "alloc_netdev_mqs() failed\n");
+ return -ENOMEM;
+ }
+
+--
+2.38.1
+
More information about the lede-commits
mailing list