[openwrt/openwrt] realtek: add support for Netgear GS750E
LEDE Commits
lede-commits at lists.infradead.org
Fri Jan 13 13:28:54 PST 2023
svanheule pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/ea42a04161e3dee8fb1e67f48ccf8ce115617a9b
commit ea42a04161e3dee8fb1e67f48ccf8ce115617a9b
Author: Davide Fioravanti <pantanastyle at gmail.com>
AuthorDate: Tue Jan 3 14:27:50 2023 +0100
realtek: add support for Netgear GS750E
This is an RTL8393-based switch with 48 RJ-45 and 2 SFP ports.
Hardware
--------
SoC: Realtek RTL8393M
RAM: 128MB DDR3 (Nanya NT5CC64M16GP-DI)
FLASH: 8MB NOR (Macronix MX25L6433F)
ETH: 48x 10/100/1000 Mbps RJ-45 Ethernet
SFP: 2x SFP
BTN:
- 1x Reset button
LEDS:
- 50x Green-Amber leds: lan/sfp status
- 1x Green led: power (Always on)
UART:
- 115200-8-N-1 (CN3, pin-out on PCB)
Everything works correctly except for the 2 SFP ports that are not
working unless you enable it every boot in U-Boot with the command:
rtk network on
Installation
------------
You can install Openwrt using one of the following methods.
Warning: flashing OpenWrt will delete your current configuration.
Warning 2: if the -factory.bix file is not available anymore, you must
follow Method 2.
Method 1:
Check the firmware version currently running on your switch. If you are
running FW V1.0.1.10 or greater, you have to download the firmware
V1.0.1.8 from Netgear website and then flash this version. When the
switch restarts, it should be on version V1.0.1.8. Now you can get the
OpenWrt -factory.bix file and then flash it using the OEM web interface.
Method 2 (requires the UART connection):
Boot the -initramfs-kernel.bin image from U-Boot with these commands:
rtk network on;
tftpboot 0x8f000000 openwrt-realtek-rtl839x-netgear_gs750e-initramfs-kernel.bin;
bootm;
And then flash the -sysupgrade.bin file from OpenWrt.
Revert to stock
---------------
Get the stock firmware from the Netgear website and flash it using the
OpenWrt web interface. Remember to not keep the current configuration
and check the "Force upgrade" checkbox
Once reverted to stock the firmware could complain in the UART console
about mtdblock3 and/or mtdblock4 not being mounted correctly but it
seems to work anyway without any problems. Sample error:
mount: Mounting /dev/mtdblock4 on /mntlog failed: Input/output error
If you want to get rid of these error messages you can boot the
-initramfs-kernel.bin image from U-Boot with these commands:
rtk network on;
tftpboot 0x8f000000 openwrt-realtek-rtl839x-netgear_gs750e-initramfs-kernel.bin;
bootm;
And then erase the corresponding partitions using the command:
For mtdblock3:
mtd erase jffs2_cfg
For mtdblock4:
mtd erase jffs2_log
Now you can reboot the switch and the errors should be gone
Note
----
To get the SFP ports fully working, all the right GPIOs must be found.
In the GPL sources I found these:
- GPIO_14: SFP_TX_DIS1;
- GPIO_19: SFP_TX_DIS0;
Signed-off-by: Davide Fioravanti <pantanastyle at gmail.com>
---
.../realtek/dts-5.10/rtl8393_netgear_gs750e.dts | 252 +++++++++++++++++++++
.../realtek/dts-5.15/rtl8393_netgear_gs750e.dts | 252 +++++++++++++++++++++
target/linux/realtek/image/rtl839x.mk | 20 ++
3 files changed, 524 insertions(+)
diff --git a/target/linux/realtek/dts-5.10/rtl8393_netgear_gs750e.dts b/target/linux/realtek/dts-5.10/rtl8393_netgear_gs750e.dts
new file mode 100644
index 0000000000..750af3e94f
--- /dev/null
+++ b/target/linux/realtek/dts-5.10/rtl8393_netgear_gs750e.dts
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rtl839x.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "netgear,gs750e", "realtek,rtl8393-soc";
+ model = "Netgear GS750E";
+
+ aliases {
+ label-mac-device = ðernet0;
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ virtual_flash {
+ compatible = "mtd-concat";
+
+ devices = <&fwconcat0>, <&fwconcat1>, <&fwconcat2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "firmware";
+ reg = <0x0 0x760000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x174e4741>;
+ };
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition at 80000 {
+ label = "u-boot-env";
+ reg = <0x80000 0x10000>;
+ read-only;
+ };
+
+ partition at 90000 {
+ label = "u-boot-env2";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ fwconcat1: partition at a0000 {
+ label = "jffs2_cfg";
+ reg = <0xa0000 0x80000>;
+ };
+
+ fwconcat2: partition at 120000 {
+ label = "jffs2_log";
+ reg = <0x120000 0x80000>;
+ };
+
+ fwconcat0: partition at 1a0000 {
+ label = "runtime";
+ reg = <0x1a0000 0x660000>;
+ };
+ };
+ };
+};
+
+ðernet0 {
+ mdio: mdio-bus {
+ compatible = "realtek,rtl838x-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+
+ /* External phy RTL8218B #1 */
+ EXTERNAL_PHY(0)
+ EXTERNAL_PHY(1)
+ EXTERNAL_PHY(2)
+ EXTERNAL_PHY(3)
+ EXTERNAL_PHY(4)
+ EXTERNAL_PHY(5)
+ EXTERNAL_PHY(6)
+ EXTERNAL_PHY(7)
+
+ /* External phy RTL8218B #2 */
+ EXTERNAL_PHY(8)
+ EXTERNAL_PHY(9)
+ EXTERNAL_PHY(10)
+ EXTERNAL_PHY(11)
+ EXTERNAL_PHY(12)
+ EXTERNAL_PHY(13)
+ EXTERNAL_PHY(14)
+ EXTERNAL_PHY(15)
+
+ /* External phy RTL8218B #3 */
+ EXTERNAL_PHY(16)
+ EXTERNAL_PHY(17)
+ EXTERNAL_PHY(18)
+ EXTERNAL_PHY(19)
+ EXTERNAL_PHY(20)
+ EXTERNAL_PHY(21)
+ EXTERNAL_PHY(22)
+ EXTERNAL_PHY(23)
+
+ /* External phy RTL8218B #4 */
+ EXTERNAL_PHY(24)
+ EXTERNAL_PHY(25)
+ EXTERNAL_PHY(26)
+ EXTERNAL_PHY(27)
+ EXTERNAL_PHY(28)
+ EXTERNAL_PHY(29)
+ EXTERNAL_PHY(30)
+ EXTERNAL_PHY(31)
+
+ /* External phy RTL8218B #5 */
+ EXTERNAL_PHY(32)
+ EXTERNAL_PHY(33)
+ EXTERNAL_PHY(34)
+ EXTERNAL_PHY(35)
+ EXTERNAL_PHY(36)
+ EXTERNAL_PHY(37)
+ EXTERNAL_PHY(38)
+ EXTERNAL_PHY(39)
+
+ /* External phy RTL8218B #6 */
+ EXTERNAL_PHY(40)
+ EXTERNAL_PHY(41)
+ EXTERNAL_PHY(42)
+ EXTERNAL_PHY(43)
+ EXTERNAL_PHY(44)
+ EXTERNAL_PHY(45)
+ EXTERNAL_PHY(46)
+ EXTERNAL_PHY(47)
+
+ /* RTL8393 Internal SerDes */
+ INTERNAL_PHY(48)
+ INTERNAL_PHY(49)
+ };
+};
+
+&switch0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ SWITCH_PORT(0, 1, qsgmii)
+ SWITCH_PORT(1, 2, qsgmii)
+ SWITCH_PORT(2, 3, qsgmii)
+ SWITCH_PORT(3, 4, qsgmii)
+ SWITCH_PORT(4, 5, qsgmii)
+ SWITCH_PORT(5, 6, qsgmii)
+ SWITCH_PORT(6, 7, qsgmii)
+ SWITCH_PORT(7, 8, qsgmii)
+
+ SWITCH_PORT(8, 9, qsgmii)
+ SWITCH_PORT(9, 0, qsgmii)
+ SWITCH_PORT(10, 11, qsgmii)
+ SWITCH_PORT(11, 12, qsgmii)
+ SWITCH_PORT(12, 13, qsgmii)
+ SWITCH_PORT(13, 14, qsgmii)
+ SWITCH_PORT(14, 15, qsgmii)
+ SWITCH_PORT(15, 16, qsgmii)
+
+ SWITCH_PORT(16, 17, qsgmii)
+ SWITCH_PORT(17, 18, qsgmii)
+ SWITCH_PORT(18, 19, qsgmii)
+ SWITCH_PORT(19, 20, qsgmii)
+ SWITCH_PORT(20, 21, qsgmii)
+ SWITCH_PORT(21, 22, qsgmii)
+ SWITCH_PORT(22, 23, qsgmii)
+ SWITCH_PORT(23, 24, qsgmii)
+
+ SWITCH_PORT(24, 25, qsgmii)
+ SWITCH_PORT(25, 26, qsgmii)
+ SWITCH_PORT(26, 27, qsgmii)
+ SWITCH_PORT(27, 28, qsgmii)
+ SWITCH_PORT(28, 29, qsgmii)
+ SWITCH_PORT(29, 30, qsgmii)
+ SWITCH_PORT(30, 31, qsgmii)
+ SWITCH_PORT(31, 32, qsgmii)
+
+ SWITCH_PORT(32, 33, qsgmii)
+ SWITCH_PORT(33, 34, qsgmii)
+ SWITCH_PORT(34, 35, qsgmii)
+ SWITCH_PORT(35, 36, qsgmii)
+ SWITCH_PORT(36, 37, qsgmii)
+ SWITCH_PORT(37, 38, qsgmii)
+ SWITCH_PORT(38, 39, qsgmii)
+ SWITCH_PORT(39, 40, qsgmii)
+
+ SWITCH_PORT(40, 41, qsgmii)
+ SWITCH_PORT(41, 42, qsgmii)
+ SWITCH_PORT(42, 43, qsgmii)
+ SWITCH_PORT(43, 44, qsgmii)
+ SWITCH_PORT(44, 45, qsgmii)
+ SWITCH_PORT(45, 46, qsgmii)
+ SWITCH_PORT(46, 47, qsgmii)
+ SWITCH_PORT(47, 48, qsgmii)
+
+ /* SFP cages */
+ SWITCH_SFP_PORT(48, 49, sgmii)
+ SWITCH_SFP_PORT(49, 50, sgmii)
+
+ /* CPU-Port */
+ port at 52 {
+ ethernet = <ðernet0>;
+ reg = <52>;
+ phy-mode = "qsgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
diff --git a/target/linux/realtek/dts-5.15/rtl8393_netgear_gs750e.dts b/target/linux/realtek/dts-5.15/rtl8393_netgear_gs750e.dts
new file mode 100644
index 0000000000..750af3e94f
--- /dev/null
+++ b/target/linux/realtek/dts-5.15/rtl8393_netgear_gs750e.dts
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rtl839x.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "netgear,gs750e", "realtek,rtl8393-soc";
+ model = "Netgear GS750E";
+
+ aliases {
+ label-mac-device = ðernet0;
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ virtual_flash {
+ compatible = "mtd-concat";
+
+ devices = <&fwconcat0>, <&fwconcat1>, <&fwconcat2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "firmware";
+ reg = <0x0 0x760000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x174e4741>;
+ };
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition at 80000 {
+ label = "u-boot-env";
+ reg = <0x80000 0x10000>;
+ read-only;
+ };
+
+ partition at 90000 {
+ label = "u-boot-env2";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ fwconcat1: partition at a0000 {
+ label = "jffs2_cfg";
+ reg = <0xa0000 0x80000>;
+ };
+
+ fwconcat2: partition at 120000 {
+ label = "jffs2_log";
+ reg = <0x120000 0x80000>;
+ };
+
+ fwconcat0: partition at 1a0000 {
+ label = "runtime";
+ reg = <0x1a0000 0x660000>;
+ };
+ };
+ };
+};
+
+ðernet0 {
+ mdio: mdio-bus {
+ compatible = "realtek,rtl838x-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+
+ /* External phy RTL8218B #1 */
+ EXTERNAL_PHY(0)
+ EXTERNAL_PHY(1)
+ EXTERNAL_PHY(2)
+ EXTERNAL_PHY(3)
+ EXTERNAL_PHY(4)
+ EXTERNAL_PHY(5)
+ EXTERNAL_PHY(6)
+ EXTERNAL_PHY(7)
+
+ /* External phy RTL8218B #2 */
+ EXTERNAL_PHY(8)
+ EXTERNAL_PHY(9)
+ EXTERNAL_PHY(10)
+ EXTERNAL_PHY(11)
+ EXTERNAL_PHY(12)
+ EXTERNAL_PHY(13)
+ EXTERNAL_PHY(14)
+ EXTERNAL_PHY(15)
+
+ /* External phy RTL8218B #3 */
+ EXTERNAL_PHY(16)
+ EXTERNAL_PHY(17)
+ EXTERNAL_PHY(18)
+ EXTERNAL_PHY(19)
+ EXTERNAL_PHY(20)
+ EXTERNAL_PHY(21)
+ EXTERNAL_PHY(22)
+ EXTERNAL_PHY(23)
+
+ /* External phy RTL8218B #4 */
+ EXTERNAL_PHY(24)
+ EXTERNAL_PHY(25)
+ EXTERNAL_PHY(26)
+ EXTERNAL_PHY(27)
+ EXTERNAL_PHY(28)
+ EXTERNAL_PHY(29)
+ EXTERNAL_PHY(30)
+ EXTERNAL_PHY(31)
+
+ /* External phy RTL8218B #5 */
+ EXTERNAL_PHY(32)
+ EXTERNAL_PHY(33)
+ EXTERNAL_PHY(34)
+ EXTERNAL_PHY(35)
+ EXTERNAL_PHY(36)
+ EXTERNAL_PHY(37)
+ EXTERNAL_PHY(38)
+ EXTERNAL_PHY(39)
+
+ /* External phy RTL8218B #6 */
+ EXTERNAL_PHY(40)
+ EXTERNAL_PHY(41)
+ EXTERNAL_PHY(42)
+ EXTERNAL_PHY(43)
+ EXTERNAL_PHY(44)
+ EXTERNAL_PHY(45)
+ EXTERNAL_PHY(46)
+ EXTERNAL_PHY(47)
+
+ /* RTL8393 Internal SerDes */
+ INTERNAL_PHY(48)
+ INTERNAL_PHY(49)
+ };
+};
+
+&switch0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ SWITCH_PORT(0, 1, qsgmii)
+ SWITCH_PORT(1, 2, qsgmii)
+ SWITCH_PORT(2, 3, qsgmii)
+ SWITCH_PORT(3, 4, qsgmii)
+ SWITCH_PORT(4, 5, qsgmii)
+ SWITCH_PORT(5, 6, qsgmii)
+ SWITCH_PORT(6, 7, qsgmii)
+ SWITCH_PORT(7, 8, qsgmii)
+
+ SWITCH_PORT(8, 9, qsgmii)
+ SWITCH_PORT(9, 0, qsgmii)
+ SWITCH_PORT(10, 11, qsgmii)
+ SWITCH_PORT(11, 12, qsgmii)
+ SWITCH_PORT(12, 13, qsgmii)
+ SWITCH_PORT(13, 14, qsgmii)
+ SWITCH_PORT(14, 15, qsgmii)
+ SWITCH_PORT(15, 16, qsgmii)
+
+ SWITCH_PORT(16, 17, qsgmii)
+ SWITCH_PORT(17, 18, qsgmii)
+ SWITCH_PORT(18, 19, qsgmii)
+ SWITCH_PORT(19, 20, qsgmii)
+ SWITCH_PORT(20, 21, qsgmii)
+ SWITCH_PORT(21, 22, qsgmii)
+ SWITCH_PORT(22, 23, qsgmii)
+ SWITCH_PORT(23, 24, qsgmii)
+
+ SWITCH_PORT(24, 25, qsgmii)
+ SWITCH_PORT(25, 26, qsgmii)
+ SWITCH_PORT(26, 27, qsgmii)
+ SWITCH_PORT(27, 28, qsgmii)
+ SWITCH_PORT(28, 29, qsgmii)
+ SWITCH_PORT(29, 30, qsgmii)
+ SWITCH_PORT(30, 31, qsgmii)
+ SWITCH_PORT(31, 32, qsgmii)
+
+ SWITCH_PORT(32, 33, qsgmii)
+ SWITCH_PORT(33, 34, qsgmii)
+ SWITCH_PORT(34, 35, qsgmii)
+ SWITCH_PORT(35, 36, qsgmii)
+ SWITCH_PORT(36, 37, qsgmii)
+ SWITCH_PORT(37, 38, qsgmii)
+ SWITCH_PORT(38, 39, qsgmii)
+ SWITCH_PORT(39, 40, qsgmii)
+
+ SWITCH_PORT(40, 41, qsgmii)
+ SWITCH_PORT(41, 42, qsgmii)
+ SWITCH_PORT(42, 43, qsgmii)
+ SWITCH_PORT(43, 44, qsgmii)
+ SWITCH_PORT(44, 45, qsgmii)
+ SWITCH_PORT(45, 46, qsgmii)
+ SWITCH_PORT(46, 47, qsgmii)
+ SWITCH_PORT(47, 48, qsgmii)
+
+ /* SFP cages */
+ SWITCH_SFP_PORT(48, 49, sgmii)
+ SWITCH_SFP_PORT(49, 50, sgmii)
+
+ /* CPU-Port */
+ port at 52 {
+ ethernet = <ðernet0>;
+ reg = <52>;
+ phy-mode = "qsgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
diff --git a/target/linux/realtek/image/rtl839x.mk b/target/linux/realtek/image/rtl839x.mk
index e9f47786dc..65078e0c44 100644
--- a/target/linux/realtek/image/rtl839x.mk
+++ b/target/linux/realtek/image/rtl839x.mk
@@ -9,6 +9,26 @@ define Device/d-link_dgs-1210-52
endef
TARGET_DEVICES += d-link_dgs-1210-52
+# When the factory image won't fit anymore, it can be removed.
+# New installation will be performed booting the initramfs image from
+# ram and then flashing the sysupgrade image from OpenWrt
+define Device/netgear_gs750e
+ SOC := rtl8393
+ IMAGE_SIZE := 7552k
+ FACTORY_SIZE := 6528k
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := GS750E
+ UIMAGE_MAGIC := 0x174e4741
+ IMAGES += factory.bix
+ IMAGE/factory.bix := \
+ append-kernel | \
+ pad-to 64k | \
+ append-rootfs | \
+ pad-rootfs | \
+ check-size $$$$(FACTORY_SIZE)
+endef
+TARGET_DEVICES += netgear_gs750e
+
define Device/panasonic_m48eg-pn28480k
SOC := rtl8393
IMAGE_SIZE := 16384k
More information about the lede-commits
mailing list