[openwrt/openwrt] ramips: do not use GPIO function on switch pins on certain devices
LEDE Commits
lede-commits at lists.infradead.org
Sat Jan 7 20:38:47 PST 2023
981213 pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/fc33c41c21362b7186aa051a2140623943fa3143
commit fc33c41c21362b7186aa051a2140623943fa3143
Author: Arınç ÜNAL <arinc.unal at arinc9.com>
AuthorDate: Wed Oct 19 14:43:00 2022 +0300
ramips: do not use GPIO function on switch pins on certain devices
The pins of the MT7530 switch that translate to GPIO 0, 3, 6, 9 and 12 has
got a function, by default, which does the same thing as the netdev
trigger. Because of bridge offloading on DSA, the netdev trigger won't see
the frames between the switch ports whilst the default function will.
Do not use the GPIO function on switch pins on devices that fall under this
category.
Keep it for:
mt7621_belkin_rt1800.dts: There's only one LED which is for the wan
interface and there's no bridge offloading between the "wan" interface and
other interfaces.
mt7621_yuncore_ax820.dts: There's no bridge offloading between the "wan"
and "lan" interfaces.
Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
---
target/linux/ramips/dts/mt7621_linksys_e7350.dts | 37 ----------------------
target/linux/ramips/dts/mt7621_netgear_wax202.dts | 18 -----------
.../ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi | 37 ----------------------
.../ramips/mt7621/base-files/etc/board.d/01_leds | 17 ----------
4 files changed, 109 deletions(-)
diff --git a/target/linux/ramips/dts/mt7621_linksys_e7350.dts b/target/linux/ramips/dts/mt7621_linksys_e7350.dts
index d7b8c214b9..ea8a684148 100644
--- a/target/linux/ramips/dts/mt7621_linksys_e7350.dts
+++ b/target/linux/ramips/dts/mt7621_linksys_e7350.dts
@@ -57,40 +57,6 @@
function = LED_FUNCTION_WAN;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
-
- led-wan2 {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_WAN;
- gpios = <&switch0 0 GPIO_ACTIVE_LOW>;
- };
-
- led-lan4 {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <4>;
- gpios = <&switch0 3 GPIO_ACTIVE_LOW>;
- };
-
- led-lan3 {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <3>;
- gpios = <&switch0 6 GPIO_ACTIVE_LOW>;
- };
-
- led-lan2 {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <2>;
- gpios = <&switch0 9 GPIO_ACTIVE_HIGH>;
- };
-
- led-lan1 {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <1>;
- gpios = <&switch0 12 GPIO_ACTIVE_LOW>;
- };
};
};
@@ -185,9 +151,6 @@
};
&switch0 {
- gpio-controller;
- #gpio-cells = <2>;
-
ports {
port at 1 {
status = "okay";
diff --git a/target/linux/ramips/dts/mt7621_netgear_wax202.dts b/target/linux/ramips/dts/mt7621_netgear_wax202.dts
index f17a805363..02f540d743 100644
--- a/target/linux/ramips/dts/mt7621_netgear_wax202.dts
+++ b/target/linux/ramips/dts/mt7621_netgear_wax202.dts
@@ -53,31 +53,16 @@
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
- led_lan1_green: lan1_green {
- label = "green:lan1";
- gpios = <&switch0 3 GPIO_ACTIVE_LOW>;
- };
-
led_lan1_orange: lan1_orange {
label = "orange:lan1";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
- led_lan2_green: lan2_green {
- label = "green:lan2";
- gpios = <&switch0 6 GPIO_ACTIVE_LOW>;
- };
-
led_lan2_orange: lan2_orange {
label = "orange:lan2";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
- led_lan3_green: lan3_green {
- label = "green:lan3";
- gpios = <&switch0 12 GPIO_ACTIVE_LOW>;
- };
-
led_lan3_orange: lan3_orange {
label = "orange:lan3";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
@@ -256,9 +241,6 @@
};
&switch0 {
- gpio-controller;
- #gpio-cells = <2>;
-
ports {
port at 1 {
status = "okay";
diff --git a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi
index f19cb4db17..59fab90ed1 100644
--- a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi
+++ b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi
@@ -51,40 +51,6 @@
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
-
- lan1 {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <1>;
- gpios = <&switch0 0 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <2>;
- gpios = <&switch0 3 GPIO_ACTIVE_LOW>;
- };
-
- lan3 {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <3>;
- gpios = <&switch0 6 GPIO_ACTIVE_LOW>;
- };
-
- lan4 {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <4>;
- gpios = <&switch0 9 GPIO_ACTIVE_HIGH>;
- };
-
- wan {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_WAN;
- gpios = <&switch0 12 GPIO_ACTIVE_LOW>;
- };
};
};
@@ -186,9 +152,6 @@
};
&switch0 {
- gpio-controller;
- #gpio-cells = <2>;
-
ports {
port at 0 {
status = "okay";
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 5fafb9b50a..985eefb860 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -94,13 +94,6 @@ keenetic,kn-3010)
linksys,e5600)
ucidef_set_led_netdev "wan" "wan link" "blue:wan" "wan" "link"
;;
-linksys,e7350)
- ucidef_set_led_netdev "lan1" "lan1" "blue:lan-1" "lan1"
- ucidef_set_led_netdev "lan2" "lan2" "blue:lan-2" "lan2"
- ucidef_set_led_netdev "lan3" "lan4" "blue:lan-3" "lan3"
- ucidef_set_led_netdev "lan4" "lan4" "blue:lan-4" "lan4"
- ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
- ;;
linksys,ea6350-v4|\
linksys,ea7300-v1|\
linksys,ea7300-v2|\
@@ -149,9 +142,6 @@ netgear,r7450)
;;
netgear,wax202)
ucidef_set_led_netdev "internet" "Internet" "green:net" "wan"
- ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
- ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
- ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3"
;;
oraybox,x3a)
ucidef_set_led_netdev "wan" "wan link" "red:status" "wan"
@@ -204,13 +194,6 @@ yuncore,ax820)
ucidef_set_led_netdev "lan" "LAN" "green:lan" "lan"
ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
;;
-zbtlink,zbt-wg1608-16m)
- ucidef_set_led_netdev "lan1" "LAN1" "green:lan-1" "lan1"
- ucidef_set_led_netdev "lan2" "LAN2" "green:lan-2" "lan2"
- ucidef_set_led_netdev "lan3" "LAN3" "green:lan-3" "lan3"
- ucidef_set_led_netdev "lan4" "LAN4" "green:lan-4" "lan4"
- ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
- ;;
zyxel,lte3301-plus)
ucidef_set_led_netdev "internet" "internet" "white:internet" "wwan0"
;;
More information about the lede-commits
mailing list