[openwrt/openwrt] realtek: don't relocate kernel on HPE 1920 series

[LEDE Commits]

svanheule pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/7c574525eef49f56f9e9880a1584b3f8d12bcf60

commit 7c574525eef49f56f9e9880a1584b3f8d12bcf60
Author: Jan Hoffmann <jan at 3e8.eu>
AuthorDate: Thu Jan 5 22:36:24 2023 +0100

    realtek: don't relocate kernel on HPE 1920 series
    
    This is no longer needed now that the kernel is built with a load
    address that matches the one hard-coded in the bootloader.
    
    Signed-off-by: Jan Hoffmann <jan at 3e8.eu>
---
 target/linux/realtek/image/Makefile  | 14 --------------
 target/linux/realtek/image/common.mk |  2 --
 2 files changed, 16 deletions(-)

diff --git a/target/linux/realtek/image/Makefile b/target/linux/realtek/image/Makefile
index 82390212e6..3dfbcf67c1 100644
--- a/target/linux/realtek/image/Makefile
+++ b/target/linux/realtek/image/Makefile
@@ -71,20 +71,6 @@ define Build/h3c-vfs
 	mv $@.new $@
 endef
 
-define Build/relocate-kernel
-	rm -rf $@.relocate
-	$(CP) ../../generic/image/relocate $@.relocate
-	$(MAKE) -j1 -C $@.relocate KERNEL_ADDR=$(KERNEL_LOADADDR) LZMA_TEXT_START=0x82000000 \
-		CROSS_COMPILE=$(TARGET_CROSS)
-	( \
-		dd if=$@.relocate/loader.bin bs=32 conv=sync && \
-		perl -e '@s = stat("$@"); print pack("N", @s[7])' && \
-		cat "$@" \
-	) > "$@.new"
-	mv "$@.new" "$@"
-	rm -rf $@.relocate
-endef
-
 define Device/Default
   PROFILES = Default
   KERNEL := \
diff --git a/target/linux/realtek/image/common.mk b/target/linux/realtek/image/common.mk
index 8f536bf15f..214683f8e9 100644
--- a/target/linux/realtek/image/common.mk
+++ b/target/linux/realtek/image/common.mk
@@ -34,14 +34,12 @@ define Device/hpe_1920
   KERNEL := \
 	kernel-bin | \
 	append-dtb | \
-	relocate-kernel | \
 	7z | \
 	h3c-image | \
 	h3c-vfs
   KERNEL_INITRAMFS := \
 	kernel-bin | \
 	append-dtb | \
-	relocate-kernel | \
 	7z | \
 	h3c-image
   IMAGE/sysupgrade.bin := \