[openwrt/openwrt] ramips: add basic support for tp-link er605-v2
LEDE Commits
lede-commits at lists.infradead.org
Wed Jan 4 14:22:02 PST 2023
hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/665c2154ef122d10dfffeca95538ebdff82653b5
commit 665c2154ef122d10dfffeca95538ebdff82653b5
Author: Nikolay Martynov <mar.kolya at gmail.com>
AuthorDate: Wed Dec 14 20:26:38 2022 -0500
ramips: add basic support for tp-link er605-v2
This is a MT7621-based device with 128MB NAND flash, 256MB RAM, and a USB port.
The board has headers to attach console. In order for them to work two solder
bridges near those pads need to be made.
The defice has the following partition table:
```
0x000000000000-0x000000080000 : "u-boot"
0x000000080000-0x000000100000 : "u-boot-env"
0x000000100000-0x000000140000 : "factory"
0x000000140000-0x000007e00000 : "firmware"
0x000007e00000-0x000008000000 : "panic-ops"
```
`firmware` partition contains UBI volumes. Unfortunately I accidentally wiped
partition and I no longer have access to it.
`firmware` partition contains 'secondary' U-Boot which is run by 'first' u-boot.
It also contains various configuration partitions that include device info and
MAC address. There also seems to be 'primary' and 'backup' set of 'main' volumes.
U-boot has `mtkupgrade` command that just overrides data on firmware partitions.
Firmware file provided by TP-Link cannot be used with that command.
U-boot also has 'recovery' http server. Unfortunately I was not able to make it
work with manufacturer's firmware.
Manufacturer's firmware essentially contains multiple UBI volumes along with
'partition table'. Unfortunately I no longer can properly run manufacturer's
firmware so I cannot at the moment try to a support for building 'factory' images.
This patch adds support for initramfs image as well as sysupgrade image.
This seems to be pretty standard MT7621 board otherwise.
Things that work:
* network
* leds
* usb
* factory MAC detection
Signed-off-by: Nikolay Martynov <mar.kolya at gmail.com>
---
package/base-files/files/lib/functions/system.sh | 11 ++
target/linux/ramips/dts/mt7621_tplink_er605-v2.dts | 180 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 18 +++
.../mt7621/base-files/etc/board.d/02_network | 9 ++
.../mt7621/base-files/lib/upgrade/platform.sh | 6 +
5 files changed, 224 insertions(+)
diff --git a/package/base-files/files/lib/functions/system.sh b/package/base-files/files/lib/functions/system.sh
index 176c10d065..94ccc02bb8 100644
--- a/package/base-files/files/lib/functions/system.sh
+++ b/package/base-files/files/lib/functions/system.sh
@@ -129,6 +129,17 @@ mtd_get_mac_encrypted_deco() {
echo $macaddr
}
+mtd_get_mac_uci_config_ubi() {
+ local volumename="$1"
+
+ . /lib/upgrade/nand.sh
+
+ local ubidev=$(nand_attach_ubi $CI_UBIPART)
+ local part=$(nand_find_volume $ubidev $volumename)
+
+ cat "/dev/$part" | sed -n 's/^\s*option macaddr\s*'"'"'\?\([0-9A-F:]\+\)'"'"'\?/\1/Ip'
+}
+
mtd_get_mac_text() {
local mtdname=$1
local offset=$(($2))
diff --git a/target/linux/ramips/dts/mt7621_tplink_er605-v2.dts b/target/linux/ramips/dts/mt7621_tplink_er605-v2.dts
new file mode 100644
index 0000000000..3381e598bd
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_tplink_er605-v2.dts
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "TP-Link ER605 v2";
+ compatible = "tplink,er605-v2", "mediatek,mt7621-soc";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 noinitrd";
+ };
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = &gmac0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_usb: usb {
+ label = "green:usb";
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_power: power {
+ label = "green:power";
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_system: system {
+ label = "green:system";
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset button";
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ reg_usb_vbus: regulator-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&gmac0 {
+ label = "dsa";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "eth0";
+ phy-handle = <ðphy0>;
+};
+
+
+&switch0 {
+ ports {
+ port at 0 {
+ status = "disabled";
+ };
+
+ port at 1 {
+ status = "okay";
+ label = "eth1";
+ };
+
+ port at 2 {
+ status = "okay";
+ label = "eth2";
+ };
+
+ port at 3 {
+ status = "okay";
+ label = "eth3";
+ };
+
+ port at 4 {
+ status = "okay";
+ label = "eth4";
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition at 80000 {
+ label = "u-boot-env";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ factory: partition at 100000 {
+ label = "factory";
+ reg = <0x100000 0x40000>;
+ read-only;
+ };
+
+ partition at 140000 {
+ label = "firmware";
+ reg = <0x140000 0x7cc0000>;
+ };
+
+ partition at 7e00000 {
+ label = "panic-ops";
+ reg = <0x7e00000 0x200000>;
+ };
+ };
+};
+
+
+&mdio {
+ ethphy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "uart2", "uart3", "pcie", "jtag";
+ function = "gpio";
+ };
+};
+
+&spi0 {
+ status = "disabled";
+};
+
+&xhci {
+ vusb33-supply = <®_3p3v>;
+ vbus-supply = <®_usb_vbus>;
+};
+
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index cd7e10e7dc..9804b70e16 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -1961,6 +1961,24 @@ define Device/tplink_eap615-wall-v1
endef
TARGET_DEVICES += tplink_eap615-wall-v1
+define Device/tplink_er605-v2
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := TP-Link
+ DEVICE_MODEL := ER605
+ DEVICE_VARIANT := v2
+ DEVICE_PACKAGES := -wpad-basic-wolfssl kmod-usb3
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4096k
+ KERNEL_IN_UBI := 1
+ KERNEL_LOADADDR := 0x82000000
+ KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ IMAGES += sysupgrade.tar
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE_SIZE := 127744k
+endef
+TARGET_DEVICES += tplink_er605-v2
+
define Device/tplink_mr600-v2-eu
$(Device/dsa-migration)
$(Device/tplink-v2)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index b7121db64f..f0ac4f1c4f 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -99,6 +99,9 @@ ramips_setup_interfaces()
tplink,eap615-wall-v1)
ucidef_set_interface_lan "lan0 lan1 lan2 lan3"
;;
+ tplink,er605-v2)
+ ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
+ ;;
tplink,tl-wpa8631p-v3)
ucidef_set_interface_lan "lan1 lan2 lan3 plc0"
;;
@@ -225,6 +228,12 @@ ramips_setup_macs()
label_mac=$(cat "/sys/firmware/mikrotik/hard_config/mac_base")
lan_mac=$label_mac
;;
+ tplink,er605-v2)
+ CI_UBIPART="firmware"
+ label_mac=$(mtd_get_mac_uci_config_ubi "tddp")
+ lan_mac=$label_mac
+ wan_mac=$(macaddr_add "$label_mac" 1)
+ ;;
tplink,mr600-v2-eu)
label_mac=$(cat "/sys/class/net/eth0/address")
wwan_mac=$(macaddr_add $label_mac 1)
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index c665820169..fd856e6b3a 100755
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -124,6 +124,12 @@ platform_do_upgrade() {
iodata_mstc_upgrade_prepare "0x1fe75"
nand_do_upgrade "$1"
;;
+ tplink,er605-v2)
+ echo "Upgrading tplink,er605-v2"
+ CI_UBIPART="firmware"
+ CI_KERNPART="kernel"
+ nand_do_upgrade "$1"
+ ;;
ubnt,edgerouter-x|\
ubnt,edgerouter-x-sfp)
platform_upgrade_ubnt_erx "$1"
More information about the lede-commits
mailing list