[openwrt/openwrt] mvebu: mochabin: enlarge PCI memory window

[LEDE Commits]

ansuel pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/00c5276659cb9929fc5010ebe2f2f10b4d4cf9ef

commit 00c5276659cb9929fc5010ebe2f2f10b4d4cf9ef
Author: Robert Marko <robert.marko at sartura.hr>
AuthorDate: Sun Feb 19 12:58:56 2023 +0100

    mvebu: mochabin: enlarge PCI memory window
    
    Armada 7040 uses a rather small 15MB memory window for every PCI adapter,
    however this is not sufficient for Qualcomm QCA6390 802.11ax cards that
    are shipped along with the OpenWrt WLAN model of MOCHAbin as ath11k
    requires at least 16MB of memory.
    
    So, similar to what MACCHIATOBin has been doing for years, lets move
    to using the second PCIe 2 memory window and expand it to 128MB to
    make it future proof.
    
    This has been already sent upstream [1].
    [1] https://lore.kernel.org/linux-arm-kernel/20230219121418.1395401-1-robert.marko@sartura.hr/
    
    Signed-off-by: Robert Marko <robert.marko at sartura.hr>
---
 .../mvebu/files/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts     | 1 +
 1 file changed, 1 insertion(+)

diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
index c198061af7..c4e11b5049 100644
--- a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
+++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
@@ -445,4 +445,5 @@
 	phys = <&cp0_comphy5 2>;
 	phy-names = "cp0-pcie2-x1-phy";
 	reset-gpio = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>;
+	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>;
 };