[openwrt/openwrt] ipq807x: add support for Buffalo WXR-5950AX12
LEDE Commits
lede-commits at lists.infradead.org
Mon Feb 13 06:31:24 PST 2023
ansuel pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/f490295bf213c5e181d16cbe53c163c1c9983e45
commit f490295bf213c5e181d16cbe53c163c1c9983e45
Author: INAGAKI Hiroshi <musashino.open at gmail.com>
AuthorDate: Mon Jan 23 13:01:13 2023 +0900
ipq807x: add support for Buffalo WXR-5950AX12
Buffalo WXR-5950AX12 is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on
IPQ8074A.
Specification:
- SoC : Qualcomm IPQ8074A
- RAM : DDR3 1024 MiB (2x Nanya NT5CC256M16ER-EK)
- Flash : RAW NAND 256 MiB (Winbond W29N02GZBIBA)
- WLAN : 2.4/5 GHz (IPQ8074A)
- Ethernet : 5 ports
- WAN : 100/1000/2500/10000 Mbps x1 (AQR113C)
- LAN : 100/1000/2500/10000 Mbps x1 (AQR113C),
10/100/1000 Mbps x3 (QCA8075)
- LED/Keys : 8x/5x
- UART : pin header on PCB (J7)
- assignment: 3.3V, GND, TX, RX from disc marking
- settings : 115200n8
- Power : 12 VDC, 4 A
Flash instruction using initramfs image:
1. Prepare TFTP server with IP address 192.168.11.10
2. Rename OpenWrt initramfs image to "WXR-5950AX12-initramfs.uImage and
place it to TFTP directory
3. Hold AOSS (WPS) button and power on WXR-5950AX12
4. WXR-5950AX12 downloads initramfs image from TFTP server and boots
with it automatically
5. Upload sysupgrade image to WXR-5950AX12 and perform sysupgrade
6. Wait ~120 seconds to complete flashing
Partition layout:
0x000000000000-0x000000100000 : "0:sbl1"
0x000000100000-0x000000200000 : "0:mibib"
0x000000200000-0x000000280000 : "0:bootconfig"
0x000000280000-0x000000300000 : "0:bootconfig1"
0x000000300000-0x000000600000 : "0:qsee"
0x000000600000-0x000000900000 : "0:qsee_1"
0x000000900000-0x000000980000 : "0:devcfg"
0x000000980000-0x000000a00000 : "0:devcfg_1"
0x000000a00000-0x000000a80000 : "0:apdp"
0x000000a80000-0x000000b00000 : "0:apdp_1"
0x000000b00000-0x000000b80000 : "0:rpm"
0x000000b80000-0x000000c00000 : "0:rpm_1"
0x000000c00000-0x000000c80000 : "0:cdt"
0x000000c80000-0x000000d00000 : "0:cdt_1"
0x000000d00000-0x000000d80000 : "0:appsblenv"
0x000000d80000-0x000000e80000 : "0:appsbl"
0x000000e80000-0x000000f80000 : "0:appsbl_1"
0x000000f80000-0x000001000000 : "0:art"
0x000001000000-0x000001080000 : "0:art_1"
0x000001080000-0x000001100000 : "0:orgdata"
0x000001100000-0x000001180000 : "0:orgdata_1"
0x000001180000-0x000005180000 : "rootfs"
0x000005180000-0x000009180000 : "rootfs_recover"
0x000009180000-0x000010000000 : "user_property"
Notes:
- WXR-5950AX12 has 2x OS images on NAND flash. The 1st image is for
normal operation and the 2nd one is for recoverying or firmware
upgrading on stock.
- Stock U-Boot checks MD5 hashes in "fw_hash" volume in each "root*"
partition when booting. This is just a comparation of hash strings.
Behaviors:
- both "fw_hash" volumes exist, hashes are rootfs == rootfs_recover
---> boot from rootfs
- both "fw_hash" volumes exist, hashes are rootfs != rootfs_recover
---> boot from rootfs_recover
Note: this behavior is used for firmware upgrading on stock
- "fw_hash" volume in rootfs is missing
---> boot from rootfs_recover
- "fw_hash" volume in rootfs_recover is missing
---> boot from rootfs
- "fw_hash" volumes in both root* partition are missing
---> boot from rootfs_recover
Reverting to stock firmware:
1. Decrypt official image by buffalo-enc and remove header
example of decryption:
$ buffalo-enc -i wxr_5950ax12_jp_305 -o wxr_5950ax12_jp_305.dec \
-d -k olaffuB -O 0xc8
example of removing header (v3.05):
- before
$ hexdump -n 64 -v -C wxr_5950ax12_jp_305.dec
00000000 57 58 52 2d 35 39 35 30 41 58 31 32 5f 33 2e 30 |WXR-5950AX12_3.0|
00000010 35 5f 31 2e 30 31 5f 4a 50 5f 6a 70 5f 71 63 61 |5_1.01_JP_jp_qca|
00000020 0a 66 69 6c 65 6c 65 6e 3d 34 35 33 35 30 39 31 |.filelen=4535091|
00000030 32 0a 55 42 49 23 01 00 00 00 00 00 00 00 00 00 |2.UBI#..........|
00000040
- after
$ hexdump -n 64 -v -C wxr_5950ax12_jp_305.ubi
00000000 55 42 49 23 01 00 00 00 00 00 00 00 00 00 00 00 |UBI#............|
00000010 00 00 08 00 00 00 10 00 78 cf c4 91 00 00 00 00 |........x.......|
00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000030 00 00 00 00 00 00 00 00 00 00 00 00 3d 2a 64 fd |............=*d.|
00000040
2. Boot WXR-5950AX12 with OpenWrt initramfs image
3. Upload modified stock image to WXR-5950AX12
4. Find partitions "rootfs" and "rootfs_recover"
example:
root at OpenWrt:/# cat /proc/mtd
dev: size erasesize name
...
mtd22: 04000000 00020000 "rootfs"
mtd23: 04000000 00020000 "rootfs_recover"
...
in this case, "rootfs" is mtd22 and "rootfs_recover" is mtd23
5. Format "rootfs"/"rootfs_recover" partition with the uploaded image
example:
ubiformat /dev/mtd22 -f /tmp/wxr_5950ax12_jp_305.ubi
ubiformat /dev/mtd23 -f /tmp/wxr_5950ax12_jp_305.ubi
6. Remove "rootfs"/"rootfs_data" volume from user_property partition
example:
. /lib/upgrade/nand.sh
UBI=$(nand_attach_ubi user_property)
ubirmvol /dev/$UBI -N rootfs
ubirmvol /dev/$UBI -N rootfs_data
7. Reboot
MAC addresses:
LAN : 50:C4:DD:xx:xx:28 (0:APPSBLENV, ethaddr (text))
WAN : 50:C4:DD:xx:xx:28 (0:APPSBLENV, ethaddr (text))
2.4 GHz: 50:C4:DD:xx:xx:30 (0:APPSBLENV, wlan0addr (text))
5 GHz : 50:C4:DD:xx:xx:38 (0:APPSBLENV, wlan1addr (text))
Reviewed-by: Robert Marko <robimarko at gmail.com>
Signed-off-by: INAGAKI Hiroshi <musashino.open at gmail.com>
---
package/firmware/ipq-wifi/Makefile | 2 +
.../ipq-wifi/board-buffalo_wxr-5950ax12.ipq8074 | Bin 0 -> 131184 bytes
.../ipq807x/base-files/etc/board.d/02_network | 1 +
.../etc/hotplug.d/firmware/11-ath11k-caldata | 1 +
.../ipq807x/base-files/lib/upgrade/buffalo.sh | 55 +++
.../ipq807x/base-files/lib/upgrade/platform.sh | 8 +
.../arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts | 376 +++++++++++++++++++++
target/linux/ipq807x/image/generic.mk | 13 +
8 files changed, 456 insertions(+)
diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index 861eec13dc..8e7fc4da39 100644
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -26,6 +26,7 @@ endef
ALLWIFIBOARDS:= \
aruba_ap-365 \
+ buffalo_wxr-5950ax12 \
devolo_magic-2-wifi-next \
dynalink_dl-wrx36 \
edgecore_eap102 \
@@ -125,6 +126,7 @@ endef
# Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
$(eval $(call generate-ipq-wifi-package,aruba_ap-365,Aruba AP-365))
+$(eval $(call generate-ipq-wifi-package,buffalo_wxr-5950ax12,Buffalo WXR-5950AX12))
$(eval $(call generate-ipq-wifi-package,devolo_magic-2-wifi-next,devolo Magic 2 WiFi next))
$(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
$(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
diff --git a/package/firmware/ipq-wifi/board-buffalo_wxr-5950ax12.ipq8074 b/package/firmware/ipq-wifi/board-buffalo_wxr-5950ax12.ipq8074
new file mode 100644
index 0000000000..57badaa535
Binary files /dev/null and b/package/firmware/ipq-wifi/board-buffalo_wxr-5950ax12.ipq8074 differ
diff --git a/target/linux/ipq807x/base-files/etc/board.d/02_network b/target/linux/ipq807x/base-files/etc/board.d/02_network
index a8d9d5d6cf..43c67a0f31 100644
--- a/target/linux/ipq807x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq807x/base-files/etc/board.d/02_network
@@ -11,6 +11,7 @@ ipq807x_setup_interfaces()
local board="$1"
case "$board" in
+ buffalo,wxr-5950ax12|\
dynalink,dl-wrx36|\
xiaomi,ax9000)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
diff --git a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
index 304d3a71b8..eec286e269 100644
--- a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
+++ b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
@@ -9,6 +9,7 @@ board=$(board_name)
case "$FIRMWARE" in
"ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin")
case "$board" in
+ buffalo,wxr-5950ax12|\
edgecore,eap102|\
edimax,cax1800|\
dynalink,dl-wrx36|\
diff --git a/target/linux/ipq807x/base-files/lib/upgrade/buffalo.sh b/target/linux/ipq807x/base-files/lib/upgrade/buffalo.sh
new file mode 100644
index 0000000000..d0ed258890
--- /dev/null
+++ b/target/linux/ipq807x/base-files/lib/upgrade/buffalo.sh
@@ -0,0 +1,55 @@
+. /lib/functions.sh
+
+# Prepare UBI devices for OpenWrt installation
+# - rootfs (mtd22)
+# - remove "ubi_rootfs" volume (rootfs on stock)
+# - remove "fw_hash" volume (firmware hash)
+# - user_property (mtd24)
+# - remove "user_property_ubi" volume (user configuration)
+# - remove "extra_property" volume (gzipped syslog)
+buffalo_upgrade_prepare() {
+ local ubi_rootdev ubi_propdev
+
+ if ! ubi_rootdev="$(nand_attach_ubi rootfs)" || \
+ ! ubi_propdev="$(nand_attach_ubi user_property)"; then
+ echo "failed to attach UBI volume \"rootfs\" or \"user_property\", rebooting..."
+ reboot -f
+ fi
+
+ ubirmvol /dev/$ubi_rootdev -N ubi_rootfs &> /dev/null || true
+ ubirmvol /dev/$ubi_rootdev -N fw_hash &> /dev/null || true
+
+ ubirmvol /dev/$ubi_propdev -N user_property_ubi &> /dev/null || true
+ ubirmvol /dev/$ubi_propdev -N extra_property &> /dev/null || true
+}
+
+# Re-create small dummy ubi_rootfs volume and update
+# fw_hash volume to pass the checking by U-Boot
+# - rootfs (mtd22)
+# - re-create "ubi_rootfs" volume
+# - re-create and update "fw_hash" volume
+# - rootfs_recover (mtd23)
+# - update "fw_hash" volume
+buffalo_upgrade_optvol() {
+ local ubi_rootdev ubi_rcvrdev
+ local hashvol_root hashvol_rcvr
+
+ if ! ubi_rootdev="$(nand_attach_ubi rootfs)" || \
+ ! ubi_rcvrdev="$(nand_attach_ubi rootfs_recover)"; then
+ echo "failed to attach UBI volume \"rootfs\" or \"rootfs_recover\", rebooting..."
+ reboot -f
+ fi
+
+ ubimkvol /dev/$ubi_rootdev -N ubi_rootfs -S 1
+ ubimkvol /dev/$ubi_rootdev -N fw_hash -S 1 -t static
+
+ if ! hashvol_root="$(nand_find_volume $ubi_rootdev fw_hash)" || \
+ ! hashvol_rcvr="$(nand_find_volume $ubi_rcvrdev fw_hash)"; then
+ echo "\"fw_hash\" volume in \"rootfs\" or \"rootfs_recover\" not found, rebooting..."
+ reboot -f
+ fi
+
+ echo -n "00000000000000000000000000000000" > /tmp/dummyhash.txt
+ ubiupdatevol /dev/$hashvol_root /tmp/dummyhash.txt
+ ubiupdatevol /dev/$hashvol_rcvr /tmp/dummyhash.txt
+}
diff --git a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh
index 4a6a91b5f5..683015898a 100644
--- a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh
@@ -43,6 +43,14 @@ platform_pre_upgrade() {
platform_do_upgrade() {
case "$(board_name)" in
+ buffalo,wxr-5950ax12)
+ CI_KERN_UBIPART="rootfs"
+ CI_ROOT_UBIPART="user_property"
+ buffalo_upgrade_prepare
+ nand_do_flash_file "$1" || nand_do_upgrade_failed
+ nand_do_restore_config || nand_do_upgrade_failed
+ buffalo_upgrade_optvol
+ ;;
dynalink,dl-wrx36)
nand_do_upgrade "$1"
;;
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts
new file mode 100644
index 0000000000..d9b083c4d0
--- /dev/null
+++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Buffalo WXR-5950AX12";
+ compatible = "buffalo,wxr-5950ax12", "qcom,ipq8074";
+
+ aliases {
+ serial0 = &blsp1_uart5;
+ led-boot = &led_power_white;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_white;
+ led-upgrade = &led_power_white;
+ label-mac-device = &dp5_syn;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs-append = " ubi.mtd=user_property root=/dev/ubiblock1_0";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "white:router";
+ gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_WHITE>;
+ };
+
+ led-1 {
+ label = "red:router";
+ gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led_power_red: led-2 {
+ label = "red:power";
+ gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_POWER;
+ };
+
+ led_power_white: led-3 {
+ label = "white:power";
+ gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_POWER;
+ };
+
+ led-4 {
+ label = "white:internet";
+ gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_WHITE>;
+ };
+
+ led-5 {
+ label = "red:internet";
+ gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led-6 {
+ label = "red:wireless";
+ gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_WLAN;
+ };
+
+ led-7 {
+ label = "white:wireless";
+ gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_WLAN;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ /*
+ * mode: 3x position switch
+ *
+ * - ROUTER
+ * - AP
+ * - WB (Wireless Bridge)
+ */
+ ap {
+ label = "mode-ap";
+ gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ bridge {
+ label = "mode-wb";
+ gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+
+ /*
+ * op: 2x position switch
+ *
+ * - AUTO
+ * - MANUAL (select Router/AP/WB manually)
+ */
+ manual {
+ label = "op-manual";
+ gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_2>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ reg_usb_vbus: regulator-5v-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+};
+
+&tlmm {
+ mdio_pins: mdio-pins {
+ mdc {
+ pins = "gpio68";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio {
+ pins = "gpio69";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
+
+&blsp1_uart5 {
+ status = "okay";
+};
+
+&prng {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ status = "okay";
+
+ nand at 0 {
+ reg = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+
+ partition-0-appsblenv {
+ compatible = "fixed-partitions";
+ label = "0:appsblenv";
+ read-only;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ compatible = "u-boot,env";
+ label = "env-data";
+ reg = <0x0 0x40000>;
+
+ macaddr_appsblenv_ethaddr: ethaddr {
+ };
+ };
+ };
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ /*
+ * RESET pins of phy chips
+ *
+ * WXR-5950AX12 has 2x RESET pins for QCA8075 and AQR113C.
+ * The pin of QCA8075 is for the chip and not phys in the chip, the
+ * pin of AQR113C is for 2x chips. So both pins are not appropriate
+ * to declare them as reset-gpios in phy nodes.
+ * Multiple entries in reset-gpios of mdio may not be supported, but
+ * leave the following as-is to show that the those reset pin exists.
+ */
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>, /* QCA8075 RESET */
+ <&tlmm 63 GPIO_ACTIVE_LOW>; /* AQR113C RESET (2x) */
+
+ aqr113c_1: ethernet-phy at 0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+
+ aqr113c_2: ethernet-phy at 8 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x8>;
+ };
+
+ qca8075_1: ethernet-phy at 18 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x18>;
+ };
+
+ qca8075_2: ethernet-phy at 19 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x19>;
+ };
+
+ qca8075_3: ethernet-phy at 1a {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1a>;
+ };
+
+ qca8075_4: ethernet-phy at 1b {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1b>;
+ };
+
+ qca8075_5: ethernet-phy at 1c {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1c>;
+ };
+};
+
+&switch {
+ status = "okay";
+
+ switch_cpu_bmp = <0x1>;
+ switch_lan_bmp = <0x3e>;
+ switch_wan_bmp = <0x40>;
+ switch_mac_mode = <0xb>;
+ switch_mac_mode1 = <0xd>;
+ switch_mac_mode2 = <0xd>;
+ bm_tick_mode = <0>;
+ tm_tick_mode = <0>;
+
+ qcom,port_phyinfo {
+ port at 0 {
+ port_id = <1>;
+ phy_address = <0x18>;
+ };
+
+ port at 1 {
+ port_id = <2>;
+ phy_address = <0x19>;
+ };
+
+ port at 2 {
+ port_id = <3>;
+ phy_address = <0x1a>;
+ };
+
+ port at 3 {
+ port_id = <4>;
+ phy_address = <0x1b>;
+ };
+
+ port at 4 {
+ port_id = <5>;
+ ethernet-phy-ieee802.3-c45;
+ phy_address = <0x0>;
+ };
+
+ port at 5 {
+ port_id = <6>;
+ ethernet-phy-ieee802.3-c45;
+ phy_address = <0x8>;
+ };
+ };
+};
+
+&edma {
+ status = "okay";
+};
+
+&dp2 {
+ status = "okay";
+ phy-handle = <&qca8075_2>;
+ label = "lan4";
+ nvmem-cells = <&macaddr_appsblenv_ethaddr>;
+ nvmem-cell-names = "mac-address-ascii";
+};
+
+&dp3 {
+ status = "okay";
+ phy-handle = <&qca8075_3>;
+ label = "lan3";
+ nvmem-cells = <&macaddr_appsblenv_ethaddr>;
+ nvmem-cell-names = "mac-address-ascii";
+};
+
+&dp4 {
+ status = "okay";
+ phy-handle = <&qca8075_4>;
+ label = "lan2";
+ nvmem-cells = <&macaddr_appsblenv_ethaddr>;
+ nvmem-cell-names = "mac-address-ascii";
+};
+
+&dp5_syn {
+ status = "okay";
+ phy-handle = <&aqr113c_1>;
+ label = "wan";
+ nvmem-cells = <&macaddr_appsblenv_ethaddr>;
+ nvmem-cell-names = "mac-address-ascii";
+};
+
+&dp6_syn {
+ status = "okay";
+ phy-handle = <&aqr113c_2>;
+ label = "lan1";
+ nvmem-cells = <&macaddr_appsblenv_ethaddr>;
+ nvmem-cell-names = "mac-address-ascii";
+};
+
+&ssphy_0 {
+ status = "okay";
+};
+
+&qusb_phy_0 {
+ status = "okay";
+};
+
+&usb_0 {
+ status = "okay";
+
+ vbus-supply = <®_usb_vbus>;
+};
+
+&wifi {
+ status = "okay";
+
+ qcom,ath11k-calibration-variant = "Buffalo-WXR-5950AX12";
+};
diff --git a/target/linux/ipq807x/image/generic.mk b/target/linux/ipq807x/image/generic.mk
index 3145e1b53f..38770a5f24 100644
--- a/target/linux/ipq807x/image/generic.mk
+++ b/target/linux/ipq807x/image/generic.mk
@@ -17,6 +17,19 @@ define Device/UbiFit
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
+define Device/buffalo_wxr-5950ax12
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Buffalo
+ DEVICE_MODEL := WXR-5950AX12
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_DTS_CONFIG := config at hk01
+ SOC := ipq8074
+ DEVICE_PACKAGES := ipq-wifi-buffalo_wxr-5950ax12
+endef
+TARGET_DEVICES += buffalo_wxr-5950ax12
+
define Device/dynalink_dl-wrx36
$(call Device/FitImage)
$(call Device/UbiFit)
More information about the lede-commits
mailing list