[openwrt/openwrt] ipq40xx: Use SoC DTSI for Teltonika RUTX

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/0e6982b253b9c2ae0975aabe6318ad2d03f7d76c

commit 0e6982b253b9c2ae0975aabe6318ad2d03f7d76c
Author: Robert Marko <robimarko at gmail.com>
AuthorDate: Fri Aug 11 23:51:40 2023 +0200

    ipq40xx: Use SoC DTSI for Teltonika RUTX
    
    Teltonika RUTX currently is the only device pulling in DK01 DTSI and thus
    preventing removal of DK01 and DK04 support.
    
    So, lets add the missing nodes from DK01 DTSI and use the SoC DTSI instead.
    
    Signed-off-by: Robert Marko <robimarko at gmail.com>
---
 .../files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi | 158 ++++++++++++++++++---
 1 file changed, 136 insertions(+), 22 deletions(-)

diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
index df9425b12a..737e7365a6 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
@@ -1,9 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qcom-ipq4019-ap.dk01.1.dtsi"
+#include "qcom-ipq4019.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
 
 / {
 	memory {
@@ -11,28 +12,39 @@
 		reg = <0x80000000 0x10000000>;
 	};
 
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	soc {
-		pinctrl at 1000000 {
-			mdio_pins: mdio_pinmux {
-				mux_1 {
-					pins = "gpio53";
-					function = "mdio";
-					bias-pull-up;
-				};
-				mux_2 {
-					pins = "gpio52";
-					function = "mdc";
-					bias-pull-up;
-				};
-			};
-
-			i2c_0_pins: i2c_0_pinmux {
-				mux {
-					pins = "gpio58", "gpio59";
-					function = "blsp_i2c0";
-					bias-disable;
-				};
-			};
+		tcsr at 1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		tcsr at 194b000 {
+			status = "okay";
+
+			compatible = "qcom,tcsr";
+			reg = <0x194b000 0x100>;
+			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+		};
+
+		ess_tcsr at 1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr at 1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
 		};
 
 		keys {
@@ -47,9 +59,91 @@
 	};
 };
 
+&prng {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pinmux {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+		};
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio54";
+		};
+		pinconf {
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pinconf_cs {
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_1 {
+			pins = "gpio53";
+			function = "mdio";
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio52";
+			function = "mdc";
+			bias-pull-up;
+		};
+	};
+
+	i2c_0_pins: i2c_0_pinmux {
+		mux {
+			pins = "gpio58", "gpio59";
+			function = "blsp_i2c0";
+			bias-disable;
+		};
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
 	cs-gpios = <&tlmm 54 0>, <&tlmm 63 0>;
 	num-cs = <2>;
+	status = "okay";
 
 	xt25f128b at 0 {
 		/*
@@ -208,3 +302,23 @@
 	pinctrl-names = "default";
 	phy-reset-gpio = <&tlmm 62 0>;
 };
+
+&usb3_ss_phy {
+	status = "okay";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};