[openwrt/openwrt] mvebu: refresh patches for 6.1
LEDE Commits
lede-commits at lists.infradead.org
Wed Aug 2 07:25:16 PDT 2023
lynxis pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/7f257296ec2a71c26e753a8416d08e387b2557bd
commit 7f257296ec2a71c26e753a8416d08e387b2557bd
Author: Stefan Kalscheuer <stefan at stklcode.de>
AuthorDate: Sun Jun 18 17:01:00 2023 +0200
mvebu: refresh patches for 6.1
Remove the following patches:
100-ARM-dts-turris-omnia-configure-LED-0-pin-function-to [1]
101-ARM-dts-turris-omnia-enable-LED-controller-node [2]
702-net-next-ethernet-marvell-mvnetaMQPrioOffload [3]
703-net-next-ethernet-marvell-mvnetaMQPrioFlag [4]
704-net-next-ethernet-marvell-mvnetaMQPrioQueue [5]
705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload [6]
710-v6.2-phy-marvell-phy-mvebu-a3700-comphy-Reset-COMPHY-regi [7]
Manually rebased:
902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU
All other patches automatically rebased
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=94a29bffdd59498382131fd428fed221f5c96def
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=40624346b7ae0c2b1209fc9993ea30699e512c50
[3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=75fa71e3acadbb4ab5eda18505277eb9a1f69b23
[4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e7ca75fe6662f78bfeb0112671c812e4c7b8e214
[5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e9f7099d0730341b24c057acbf545dd019581db6
[6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2551dc9e398c37a15e52122d385c29a8b06be45f
[7] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cd1e1735aeab49abc679218a79ee764c0d394880
Signed-off-by: Stefan Kalscheuer <stefan at stklcode.de>
---
...ris-omnia-configure-LED-0-pin-function-to.patch | 38 -----
.../patches-6.1/100-aardvark-workaround-PCIe.patch | 6 +-
...s-turris-omnia-enable-LED-controller-node.patch | 48 ------
...vebu-Mangle-bootloader-s-kernel-arguments.patch | 4 +-
.../301-mvebu-armada-38x-enable-libata-leds.patch | 2 +-
.../mvebu/patches-6.1/302-add_powertables.patch | 2 +-
.../306-ARM-mvebu-385-ap-Add-partitions.patch | 4 +-
.../307-armada-xp-linksys-mamba-broken-idle.patch | 2 +-
.../308-armada-xp-linksys-mamba-wan.patch | 2 +-
.../mvebu/patches-6.1/309-linksys-status-led.patch | 2 +-
...-armada388-clearfog-emmc-on-clearfog-base.patch | 4 +-
...315-armada-xp-linksys-mamba-resize-kernel.patch | 4 +-
.../316-armada-370-dts-fix-crypto-engine.patch | 4 +-
.../700-mvneta-tx-queue-workaround.patch | 4 +-
...next-ethernet-marvell-mvnetaMQPrioOffload.patch | 66 --------
...et-next-ethernet-marvell-mvnetaMQPrioFlag.patch | 30 ----
...t-next-ethernet-marvell-mvnetaMQPrioQueue.patch | 97 -----------
...xt-ethernet-marvell-mvnetaMQPrioTCOffload.patch | 182 ---------------------
...-phy-mvebu-a3700-comphy-Reset-COMPHY-regi.patch | 50 ------
.../801-pci-mvebu-time-out-reset-on-link-up.patch | 6 +-
...-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch | 2 +-
...-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch | 16 +-
...on-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch | 8 +-
...ds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch | 4 +-
...on-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch | 4 +-
...-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch | 2 +-
26 files changed, 41 insertions(+), 552 deletions(-)
diff --git a/target/linux/mvebu/patches-6.1/100-ARM-dts-turris-omnia-configure-LED-0-pin-function-to.patch b/target/linux/mvebu/patches-6.1/100-ARM-dts-turris-omnia-configure-LED-0-pin-function-to.patch
deleted file mode 100644
index 67beb06541..0000000000
--- a/target/linux/mvebu/patches-6.1/100-ARM-dts-turris-omnia-configure-LED-0-pin-function-to.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 81c0004a6433ff90fa6129418802c3c367e453c2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
-Date: Mon, 4 Jul 2022 13:36:21 +0200
-Subject: [PATCH 1/5] ARM: dts: turris-omnia: configure LED[0] pin function to
- link/activity
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The marvell PHY driver changes the LED[0] pin function to "On - 1000
-Mbps Link, Off - Else".
-
-Turris Omnia expects that the function is "On - Link, Blink - Activity,
-Off - No link".
-
-Use the `marvell,reg-init` DT property to change the function.
-
-In the future, once netdev trigger will support HW offloading, we will
-be able to have this configured via the combination of PHY driver and
-leds-turris-omnia driver.
-
-Signed-off-by: Marek Behún <kabel at kernel.org>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -396,7 +396,8 @@
- phy1: ethernet-phy at 1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
-- marvell,reg-init = <3 18 0 0x4985>;
-+ marvell,reg-init = <3 18 0 0x4985>,
-+ <3 16 0xfff0 0x0001>;
-
- /* irq is connected to &pcawan pin 7 */
- };
diff --git a/target/linux/mvebu/patches-6.1/100-aardvark-workaround-PCIe.patch b/target/linux/mvebu/patches-6.1/100-aardvark-workaround-PCIe.patch
index 975eadb80e..4936f6ad16 100644
--- a/target/linux/mvebu/patches-6.1/100-aardvark-workaround-PCIe.patch
+++ b/target/linux/mvebu/patches-6.1/100-aardvark-workaround-PCIe.patch
@@ -48,7 +48,7 @@ Cc: stable at vger.kernel.org
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -210,6 +210,8 @@ enum {
+@@ -212,6 +212,8 @@ enum {
};
#define VENDOR_ID_REG (LMI_BASE_ADDR + 0x44)
@@ -57,7 +57,7 @@ Cc: stable at vger.kernel.org
/* PCIe core controller registers */
#define CTRL_CORE_BASE_ADDR 0x18000
-@@ -558,6 +560,11 @@ static void advk_pcie_setup_hw(struct ad
+@@ -560,6 +562,11 @@ static void advk_pcie_setup_hw(struct ad
PCIE_CORE_CTRL2_TD_ENABLE;
advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
@@ -69,7 +69,7 @@ Cc: stable at vger.kernel.org
/* Set lane X1 */
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
reg &= ~LANE_CNT_MSK;
-@@ -1580,6 +1587,9 @@ static irqreturn_t advk_pcie_irq_handler
+@@ -1661,6 +1668,9 @@ static irqreturn_t advk_pcie_irq_handler
struct advk_pcie *pcie = arg;
u32 status;
diff --git a/target/linux/mvebu/patches-6.1/101-ARM-dts-turris-omnia-enable-LED-controller-node.patch b/target/linux/mvebu/patches-6.1/101-ARM-dts-turris-omnia-enable-LED-controller-node.patch
deleted file mode 100644
index ecfb43553f..0000000000
--- a/target/linux/mvebu/patches-6.1/101-ARM-dts-turris-omnia-enable-LED-controller-node.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From fed7cef5e4f2df8c6a79bebf5da1fdd3783ff6f3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
-Date: Mon, 4 Jul 2022 13:36:22 +0200
-Subject: [PATCH] ARM: dts: turris-omnia: enable LED controller node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The LED controller node is disabled because the leds-turris-omnia driver
-does not support setting the LED blinking to be controlled by the MCU.
-
-The patches for that have now been sent [1], so let's enable the node.
-
-[1] https://lore.kernel.org/linux-leds/20220704105955.15474-1-kabel@kernel.org/T/
-
-Signed-off-by: Marek Behún <kabel at kernel.org>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -194,15 +194,13 @@
- reg = <0x2b>;
- #address-cells = <1>;
- #size-cells = <0>;
-+ status = "okay";
-
- /*
- * LEDs are controlled by MCU (STM32F0) at
- * address 0x2b.
- *
-- * The driver does not support HW control mode
-- * for the LEDs yet. Disable the LEDs for now.
-- *
-- * Also LED functions are not stable yet:
-+ * LED functions are not stable yet:
- * - there are 3 LEDs connected via MCU to PCIe
- * ports. One of these ports supports mSATA.
- * There is no mSATA nor PCIe function.
-@@ -213,7 +211,6 @@
- * B. Again there is no such function defined.
- * For now we use LED_FUNCTION_INDICATOR
- */
-- status = "disabled";
-
- multi-led at 0 {
- reg = <0x0>;
diff --git a/target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch
index 9069de1614..5c3672659c 100644
--- a/target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch
+++ b/target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch
@@ -28,7 +28,7 @@ Signed-off-by: Michael Gray <michael.gray at lantisproject.com>
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -1727,6 +1727,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
+@@ -1586,6 +1586,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
The command-line arguments provided by the boot loader will be
appended to the the device tree bootargs property.
@@ -258,7 +258,7 @@ Signed-off-by: Michael Gray <michael.gray at lantisproject.com>
static int kernel_init(void *);
extern void init_IRQ(void);
-@@ -991,6 +995,18 @@ asmlinkage __visible void __init __no_sa
+@@ -992,6 +996,18 @@ asmlinkage __visible void __init __no_sa
page_alloc_init();
pr_notice("Kernel command line: %s\n", saved_command_line);
diff --git a/target/linux/mvebu/patches-6.1/301-mvebu-armada-38x-enable-libata-leds.patch b/target/linux/mvebu/patches-6.1/301-mvebu-armada-38x-enable-libata-leds.patch
index 615caac24f..b75dcf596a 100644
--- a/target/linux/mvebu/patches-6.1/301-mvebu-armada-38x-enable-libata-leds.patch
+++ b/target/linux/mvebu/patches-6.1/301-mvebu-armada-38x-enable-libata-leds.patch
@@ -1,6 +1,6 @@
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -67,6 +67,7 @@ config MACH_ARMADA_38X
+@@ -66,6 +66,7 @@ config MACH_ARMADA_38X
select HAVE_ARM_TWD if SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_38X
diff --git a/target/linux/mvebu/patches-6.1/302-add_powertables.patch b/target/linux/mvebu/patches-6.1/302-add_powertables.patch
index 93ad5de2cc..d0c0dbeb0c 100644
--- a/target/linux/mvebu/patches-6.1/302-add_powertables.patch
+++ b/target/linux/mvebu/patches-6.1/302-add_powertables.patch
@@ -667,7 +667,7 @@
pinctrl-0 = <&sdhci_pins>;
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -225,12 +225,100 @@
+@@ -223,12 +223,100 @@
pcie at 2,0 {
/* Port 0, Lane 1 */
status = "okay";
diff --git a/target/linux/mvebu/patches-6.1/306-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-6.1/306-ARM-mvebu-385-ap-Add-partitions.patch
index 2057e31c7e..aee033d21f 100644
--- a/target/linux/mvebu/patches-6.1/306-ARM-mvebu-385-ap-Add-partitions.patch
+++ b/target/linux/mvebu/patches-6.1/306-ARM-mvebu-385-ap-Add-partitions.patch
@@ -5,8 +5,8 @@ Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
- arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
+ arch/arm/boot/dts/armada-385-db-ap.dts | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
diff --git a/target/linux/mvebu/patches-6.1/307-armada-xp-linksys-mamba-broken-idle.patch b/target/linux/mvebu/patches-6.1/307-armada-xp-linksys-mamba-broken-idle.patch
index 16112d53fc..fc6d6239ca 100644
--- a/target/linux/mvebu/patches-6.1/307-armada-xp-linksys-mamba-broken-idle.patch
+++ b/target/linux/mvebu/patches-6.1/307-armada-xp-linksys-mamba-broken-idle.patch
@@ -1,6 +1,6 @@
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -485,3 +485,7 @@
+@@ -483,3 +483,7 @@
};
};
};
diff --git a/target/linux/mvebu/patches-6.1/308-armada-xp-linksys-mamba-wan.patch b/target/linux/mvebu/patches-6.1/308-armada-xp-linksys-mamba-wan.patch
index 4315abc7d2..389e03742e 100644
--- a/target/linux/mvebu/patches-6.1/308-armada-xp-linksys-mamba-wan.patch
+++ b/target/linux/mvebu/patches-6.1/308-armada-xp-linksys-mamba-wan.patch
@@ -1,6 +1,6 @@
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -387,7 +387,7 @@
+@@ -385,7 +385,7 @@
port at 4 {
reg = <4>;
diff --git a/target/linux/mvebu/patches-6.1/309-linksys-status-led.patch b/target/linux/mvebu/patches-6.1/309-linksys-status-led.patch
index e5e83572c9..0ef15f2943 100644
--- a/target/linux/mvebu/patches-6.1/309-linksys-status-led.patch
+++ b/target/linux/mvebu/patches-6.1/309-linksys-status-led.patch
@@ -39,7 +39,7 @@
chosen {
bootargs = "console=ttyS0,115200";
stdout-path = &uart0;
-@@ -197,7 +204,7 @@
+@@ -195,7 +202,7 @@
pinctrl-0 = <&power_led_pin>;
pinctrl-names = "default";
diff --git a/target/linux/mvebu/patches-6.1/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch b/target/linux/mvebu/patches-6.1/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
index dd2bef7f63..f52417e83a 100644
--- a/target/linux/mvebu/patches-6.1/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
+++ b/target/linux/mvebu/patches-6.1/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
@@ -5,8 +5,8 @@ Subject: ARM: dts: armada388-clearfog: emmc on clearfog base
Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
---
- arch/arm/boot/dts/armada-388-clearfog-base.dts | 1 +
- .../dts/armada-38x-solidrun-microsom-emmc.dtsi | 62 ++++++++++++++++++++++
+ .../arm/boot/dts/armada-388-clearfog-base.dts | 1 +
+ .../armada-38x-solidrun-microsom-emmc.dtsi | 62 +++++++++++++++++++
2 files changed, 63 insertions(+)
create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
diff --git a/target/linux/mvebu/patches-6.1/315-armada-xp-linksys-mamba-resize-kernel.patch b/target/linux/mvebu/patches-6.1/315-armada-xp-linksys-mamba-resize-kernel.patch
index f1fddceff4..c333df2784 100644
--- a/target/linux/mvebu/patches-6.1/315-armada-xp-linksys-mamba-resize-kernel.patch
+++ b/target/linux/mvebu/patches-6.1/315-armada-xp-linksys-mamba-resize-kernel.patch
@@ -11,7 +11,7 @@ Signed-off-by: Tad Davanzo <tad at spotco.us>
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -456,9 +456,9 @@
+@@ -454,9 +454,9 @@
reg = <0xa00000 0x2800000>; /* 40MB */
};
@@ -23,7 +23,7 @@ Signed-off-by: Tad Davanzo <tad at spotco.us>
};
/* kernel2 overlaps with rootfs2 by design */
-@@ -467,9 +467,9 @@
+@@ -465,9 +465,9 @@
reg = <0x3200000 0x2800000>; /* 40MB */
};
diff --git a/target/linux/mvebu/patches-6.1/316-armada-370-dts-fix-crypto-engine.patch b/target/linux/mvebu/patches-6.1/316-armada-370-dts-fix-crypto-engine.patch
index 19378870ef..b5ed5ece36 100644
--- a/target/linux/mvebu/patches-6.1/316-armada-370-dts-fix-crypto-engine.patch
+++ b/target/linux/mvebu/patches-6.1/316-armada-370-dts-fix-crypto-engine.patch
@@ -1,6 +1,6 @@
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
-@@ -234,7 +234,7 @@
+@@ -254,7 +254,7 @@
clocks = <&gateclk 23>;
clock-names = "cesa0";
marvell,crypto-srams = <&crypto_sram>;
@@ -9,7 +9,7 @@
};
};
-@@ -255,12 +255,17 @@
+@@ -275,12 +275,17 @@
* cpuidle workaround.
*/
idle-sram at 0 {
diff --git a/target/linux/mvebu/patches-6.1/700-mvneta-tx-queue-workaround.patch b/target/linux/mvebu/patches-6.1/700-mvneta-tx-queue-workaround.patch
index 32e8ef4b7d..307c46e7b8 100644
--- a/target/linux/mvebu/patches-6.1/700-mvneta-tx-queue-workaround.patch
+++ b/target/linux/mvebu/patches-6.1/700-mvneta-tx-queue-workaround.patch
@@ -9,7 +9,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -5006,6 +5006,16 @@ static int mvneta_setup_tc(struct net_de
+@@ -5222,6 +5222,16 @@ static int mvneta_setup_tc(struct net_de
}
}
@@ -26,7 +26,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
static const struct net_device_ops mvneta_netdev_ops = {
.ndo_open = mvneta_open,
.ndo_stop = mvneta_stop,
-@@ -5016,6 +5026,9 @@ static const struct net_device_ops mvnet
+@@ -5232,6 +5242,9 @@ static const struct net_device_ops mvnet
.ndo_fix_features = mvneta_fix_features,
.ndo_get_stats64 = mvneta_get_stats64,
.ndo_eth_ioctl = mvneta_ioctl,
diff --git a/target/linux/mvebu/patches-6.1/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch b/target/linux/mvebu/patches-6.1/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch
deleted file mode 100644
index 019b9528c3..0000000000
--- a/target/linux/mvebu/patches-6.1/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 75fa71e3acadbb4ab5eda18505277eb9a1f69b23 Mon Sep 17 00:00:00 2001
-From: Maxime Chevallier <maxime.chevallier at bootlin.com>
-Date: Fri, 26 Nov 2021 12:20:53 +0100
-Subject: net: mvneta: Use struct tc_mqprio_qopt_offload for MQPrio
- configuration
-
-The struct tc_mqprio_qopt_offload is a container for struct tc_mqprio_qopt,
-that allows passing extra parameters, such as traffic shaping. This commit
-converts the current mqprio code to that new struct.
-
-Signed-off-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 17 ++++++++++-------
- 1 file changed, 10 insertions(+), 7 deletions(-)
-
-(limited to 'drivers/net/ethernet/marvell/mvneta.c')
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -38,6 +38,7 @@
- #include <net/ipv6.h>
- #include <net/tso.h>
- #include <net/page_pool.h>
-+#include <net/pkt_cls.h>
- #include <linux/bpf_trace.h>
-
- /* Registers */
-@@ -4966,14 +4967,14 @@ static void mvneta_setup_rx_prio_map(str
- }
-
- static int mvneta_setup_mqprio(struct net_device *dev,
-- struct tc_mqprio_qopt *qopt)
-+ struct tc_mqprio_qopt_offload *mqprio)
- {
- struct mvneta_port *pp = netdev_priv(dev);
- u8 num_tc;
- int i;
-
-- qopt->hw = TC_MQPRIO_HW_OFFLOAD_TCS;
-- num_tc = qopt->num_tc;
-+ mqprio->qopt.hw = TC_MQPRIO_HW_OFFLOAD_TCS;
-+ num_tc = mqprio->qopt.num_tc;
-
- if (num_tc > rxq_number)
- return -EINVAL;
-@@ -4984,13 +4985,15 @@ static int mvneta_setup_mqprio(struct ne
- return 0;
- }
-
-- memcpy(pp->prio_tc_map, qopt->prio_tc_map, sizeof(pp->prio_tc_map));
-+ memcpy(pp->prio_tc_map, mqprio->qopt.prio_tc_map,
-+ sizeof(pp->prio_tc_map));
-
- mvneta_setup_rx_prio_map(pp);
-
-- netdev_set_num_tc(dev, qopt->num_tc);
-- for (i = 0; i < qopt->num_tc; i++)
-- netdev_set_tc_queue(dev, i, qopt->count[i], qopt->offset[i]);
-+ netdev_set_num_tc(dev, mqprio->qopt.num_tc);
-+ for (i = 0; i < mqprio->qopt.num_tc; i++)
-+ netdev_set_tc_queue(dev, i, mqprio->qopt.count[i],
-+ mqprio->qopt.offset[i]);
-
- return 0;
- }
diff --git a/target/linux/mvebu/patches-6.1/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch b/target/linux/mvebu/patches-6.1/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch
deleted file mode 100644
index c878a28843..0000000000
--- a/target/linux/mvebu/patches-6.1/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From e7ca75fe6662f78bfeb0112671c812e4c7b8e214 Mon Sep 17 00:00:00 2001
-From: Maxime Chevallier <maxime.chevallier at bootlin.com>
-Date: Fri, 26 Nov 2021 12:20:54 +0100
-Subject: net: mvneta: Don't force-set the offloading flag
-
-The qopt->hw flag is set by the TC code according to the offloading mode
-asked by user. Don't force-set it in the driver, but instead read it to
-make sure we do what's asked.
-
-Signed-off-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-(limited to 'drivers/net/ethernet/marvell/mvneta.c')
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4973,7 +4973,9 @@ static int mvneta_setup_mqprio(struct ne
- u8 num_tc;
- int i;
-
-- mqprio->qopt.hw = TC_MQPRIO_HW_OFFLOAD_TCS;
-+ if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS)
-+ return 0;
-+
- num_tc = mqprio->qopt.num_tc;
-
- if (num_tc > rxq_number)
diff --git a/target/linux/mvebu/patches-6.1/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch b/target/linux/mvebu/patches-6.1/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch
deleted file mode 100644
index 546a8486ef..0000000000
--- a/target/linux/mvebu/patches-6.1/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From e9f7099d0730341b24c057acbf545dd019581db6 Mon Sep 17 00:00:00 2001
-From: Maxime Chevallier <maxime.chevallier at bootlin.com>
-Date: Fri, 26 Nov 2021 12:20:55 +0100
-Subject: net: mvneta: Allow having more than one queue per TC
-
-The current mqprio implementation assumed that we are only using one
-queue per TC. Use the offset and count parameters to allow using
-multiple queues per TC. In that case, the controller will use a standard
-round-robin algorithm to pick queues assigned to the same TC, with the
-same priority.
-
-This only applies to VLAN priorities in ingress traffic, each TC
-corresponding to a vlan priority.
-
-Signed-off-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 35 ++++++++++++++++++++---------------
- 1 file changed, 20 insertions(+), 15 deletions(-)
-
-(limited to 'drivers/net/ethernet/marvell/mvneta.c')
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -498,7 +498,6 @@ struct mvneta_port {
- u8 mcast_count[256];
- u16 tx_ring_size;
- u16 rx_ring_size;
-- u8 prio_tc_map[8];
-
- phy_interface_t phy_interface;
- struct device_node *dn;
-@@ -4955,13 +4954,12 @@ static void mvneta_clear_rx_prio_map(str
- mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, 0);
- }
-
--static void mvneta_setup_rx_prio_map(struct mvneta_port *pp)
-+static void mvneta_map_vlan_prio_to_rxq(struct mvneta_port *pp, u8 pri, u8 rxq)
- {
-- u32 val = 0;
-- int i;
-+ u32 val = mvreg_read(pp, MVNETA_VLAN_PRIO_TO_RXQ);
-
-- for (i = 0; i < rxq_number; i++)
-- val |= MVNETA_VLAN_PRIO_RXQ_MAP(i, pp->prio_tc_map[i]);
-+ val &= ~MVNETA_VLAN_PRIO_RXQ_MAP(pri, 0x7);
-+ val |= MVNETA_VLAN_PRIO_RXQ_MAP(pri, rxq);
-
- mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, val);
- }
-@@ -4970,8 +4968,8 @@ static int mvneta_setup_mqprio(struct ne
- struct tc_mqprio_qopt_offload *mqprio)
- {
- struct mvneta_port *pp = netdev_priv(dev);
-+ int rxq, tc;
- u8 num_tc;
-- int i;
-
- if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS)
- return 0;
-@@ -4981,21 +4979,28 @@ static int mvneta_setup_mqprio(struct ne
- if (num_tc > rxq_number)
- return -EINVAL;
-
-+ mvneta_clear_rx_prio_map(pp);
-+
- if (!num_tc) {
-- mvneta_clear_rx_prio_map(pp);
- netdev_reset_tc(dev);
- return 0;
- }
-
-- memcpy(pp->prio_tc_map, mqprio->qopt.prio_tc_map,
-- sizeof(pp->prio_tc_map));
-+ netdev_set_num_tc(dev, mqprio->qopt.num_tc);
-
-- mvneta_setup_rx_prio_map(pp);
-+ for (tc = 0; tc < mqprio->qopt.num_tc; tc++) {
-+ netdev_set_tc_queue(dev, tc, mqprio->qopt.count[tc],
-+ mqprio->qopt.offset[tc]);
-+
-+ for (rxq = mqprio->qopt.offset[tc];
-+ rxq < mqprio->qopt.count[tc] + mqprio->qopt.offset[tc];
-+ rxq++) {
-+ if (rxq >= rxq_number)
-+ return -EINVAL;
-
-- netdev_set_num_tc(dev, mqprio->qopt.num_tc);
-- for (i = 0; i < mqprio->qopt.num_tc; i++)
-- netdev_set_tc_queue(dev, i, mqprio->qopt.count[i],
-- mqprio->qopt.offset[i]);
-+ mvneta_map_vlan_prio_to_rxq(pp, tc, rxq);
-+ }
-+ }
-
- return 0;
- }
diff --git a/target/linux/mvebu/patches-6.1/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch b/target/linux/mvebu/patches-6.1/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch
deleted file mode 100644
index 1d4a055a71..0000000000
--- a/target/linux/mvebu/patches-6.1/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch
+++ /dev/null
@@ -1,182 +0,0 @@
-From 2551dc9e398c37a15e52122d385c29a8b06be45f Mon Sep 17 00:00:00 2001
-From: Maxime Chevallier <maxime.chevallier at bootlin.com>
-Date: Fri, 26 Nov 2021 12:20:56 +0100
-Subject: net: mvneta: Add TC traffic shaping offload
-
-The mvneta controller is able to do some tocken-bucket per-queue traffic
-shaping. This commit adds support for setting these using the TC mqprio
-interface.
-
-The token-bucket parameters are customisable, but the current
-implementation configures them to have a 10kbps resolution for the
-rate limitation, since it allows to cover the whole range of max_rate
-values from 10kbps to 5Gbps with 10kbps increments.
-
-Signed-off-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 120 +++++++++++++++++++++++++++++++++-
- 1 file changed, 119 insertions(+), 1 deletion(-)
-
-(limited to 'drivers/net/ethernet/marvell/mvneta.c')
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -248,12 +248,39 @@
- #define MVNETA_TXQ_SENT_DESC_MASK 0x3fff0000
- #define MVNETA_PORT_TX_RESET 0x3cf0
- #define MVNETA_PORT_TX_DMA_RESET BIT(0)
-+#define MVNETA_TXQ_CMD1_REG 0x3e00
-+#define MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 BIT(3)
-+#define MVNETA_TXQ_CMD1_BW_LIM_EN BIT(0)
-+#define MVNETA_REFILL_NUM_CLK_REG 0x3e08
-+#define MVNETA_REFILL_MAX_NUM_CLK 0x0000ffff
- #define MVNETA_TX_MTU 0x3e0c
- #define MVNETA_TX_TOKEN_SIZE 0x3e14
- #define MVNETA_TX_TOKEN_SIZE_MAX 0xffffffff
-+#define MVNETA_TXQ_BUCKET_REFILL_REG(q) (0x3e20 + ((q) << 2))
-+#define MVNETA_TXQ_BUCKET_REFILL_PERIOD_MASK 0x3ff00000
-+#define MVNETA_TXQ_BUCKET_REFILL_PERIOD_SHIFT 20
-+#define MVNETA_TXQ_BUCKET_REFILL_VALUE_MAX 0x0007ffff
- #define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2))
- #define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff
-
-+/* The values of the bucket refill base period and refill period are taken from
-+ * the reference manual, and adds up to a base resolution of 10Kbps. This allows
-+ * to cover all rate-limit values from 10Kbps up to 5Gbps
-+ */
-+
-+/* Base period for the rate limit algorithm */
-+#define MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS 100
-+
-+/* Number of Base Period to wait between each bucket refill */
-+#define MVNETA_TXQ_BUCKET_REFILL_PERIOD 1000
-+
-+/* The base resolution for rate limiting, in bps. Any max_rate value should be
-+ * a multiple of that value.
-+ */
-+#define MVNETA_TXQ_RATE_LIMIT_RESOLUTION (NSEC_PER_SEC / \
-+ (MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS * \
-+ MVNETA_TXQ_BUCKET_REFILL_PERIOD))
-+
- #define MVNETA_LPI_CTRL_0 0x2cc0
- #define MVNETA_LPI_CTRL_1 0x2cc4
- #define MVNETA_LPI_REQUEST_ENABLE BIT(0)
-@@ -4964,11 +4991,74 @@ static void mvneta_map_vlan_prio_to_rxq(
- mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, val);
- }
-
-+static int mvneta_enable_per_queue_rate_limit(struct mvneta_port *pp)
-+{
-+ unsigned long core_clk_rate;
-+ u32 refill_cycles;
-+ u32 val;
-+
-+ core_clk_rate = clk_get_rate(pp->clk);
-+ if (!core_clk_rate)
-+ return -EINVAL;
-+
-+ refill_cycles = MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS /
-+ (NSEC_PER_SEC / core_clk_rate);
-+
-+ if (refill_cycles > MVNETA_REFILL_MAX_NUM_CLK)
-+ return -EINVAL;
-+
-+ /* Enable bw limit algorithm version 3 */
-+ val = mvreg_read(pp, MVNETA_TXQ_CMD1_REG);
-+ val &= ~(MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 | MVNETA_TXQ_CMD1_BW_LIM_EN);
-+ mvreg_write(pp, MVNETA_TXQ_CMD1_REG, val);
-+
-+ /* Set the base refill rate */
-+ mvreg_write(pp, MVNETA_REFILL_NUM_CLK_REG, refill_cycles);
-+
-+ return 0;
-+}
-+
-+static void mvneta_disable_per_queue_rate_limit(struct mvneta_port *pp)
-+{
-+ u32 val = mvreg_read(pp, MVNETA_TXQ_CMD1_REG);
-+
-+ val |= (MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 | MVNETA_TXQ_CMD1_BW_LIM_EN);
-+ mvreg_write(pp, MVNETA_TXQ_CMD1_REG, val);
-+}
-+
-+static int mvneta_setup_queue_rates(struct mvneta_port *pp, int queue,
-+ u64 min_rate, u64 max_rate)
-+{
-+ u32 refill_val, rem;
-+ u32 val = 0;
-+
-+ /* Convert to from Bps to bps */
-+ max_rate *= 8;
-+
-+ if (min_rate)
-+ return -EINVAL;
-+
-+ refill_val = div_u64_rem(max_rate, MVNETA_TXQ_RATE_LIMIT_RESOLUTION,
-+ &rem);
-+
-+ if (rem || !refill_val ||
-+ refill_val > MVNETA_TXQ_BUCKET_REFILL_VALUE_MAX)
-+ return -EINVAL;
-+
-+ val = refill_val;
-+ val |= (MVNETA_TXQ_BUCKET_REFILL_PERIOD <<
-+ MVNETA_TXQ_BUCKET_REFILL_PERIOD_SHIFT);
-+
-+ mvreg_write(pp, MVNETA_TXQ_BUCKET_REFILL_REG(queue), val);
-+
-+ return 0;
-+}
-+
- static int mvneta_setup_mqprio(struct net_device *dev,
- struct tc_mqprio_qopt_offload *mqprio)
- {
- struct mvneta_port *pp = netdev_priv(dev);
-- int rxq, tc;
-+ int rxq, txq, tc, ret;
- u8 num_tc;
-
- if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS)
-@@ -4982,6 +5072,7 @@ static int mvneta_setup_mqprio(struct ne
- mvneta_clear_rx_prio_map(pp);
-
- if (!num_tc) {
-+ mvneta_disable_per_queue_rate_limit(pp);
- netdev_reset_tc(dev);
- return 0;
- }
-@@ -5002,6 +5093,33 @@ static int mvneta_setup_mqprio(struct ne
- }
- }
-
-+ if (mqprio->shaper != TC_MQPRIO_SHAPER_BW_RATE) {
-+ mvneta_disable_per_queue_rate_limit(pp);
-+ return 0;
-+ }
-+
-+ if (mqprio->qopt.num_tc > txq_number)
-+ return -EINVAL;
-+
-+ ret = mvneta_enable_per_queue_rate_limit(pp);
-+ if (ret)
-+ return ret;
-+
-+ for (tc = 0; tc < mqprio->qopt.num_tc; tc++) {
-+ for (txq = mqprio->qopt.offset[tc];
-+ txq < mqprio->qopt.count[tc] + mqprio->qopt.offset[tc];
-+ txq++) {
-+ if (txq >= txq_number)
-+ return -EINVAL;
-+
-+ ret = mvneta_setup_queue_rates(pp, txq,
-+ mqprio->min_rate[tc],
-+ mqprio->max_rate[tc]);
-+ if (ret)
-+ return ret;
-+ }
-+ }
-+
- return 0;
- }
-
diff --git a/target/linux/mvebu/patches-6.1/710-v6.2-phy-marvell-phy-mvebu-a3700-comphy-Reset-COMPHY-regi.patch b/target/linux/mvebu/patches-6.1/710-v6.2-phy-marvell-phy-mvebu-a3700-comphy-Reset-COMPHY-regi.patch
deleted file mode 100644
index a852dc1fc1..0000000000
--- a/target/linux/mvebu/patches-6.1/710-v6.2-phy-marvell-phy-mvebu-a3700-comphy-Reset-COMPHY-regi.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From b01d622d76134e9401970ffd3fbbb9a7051f976a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali at kernel.org>
-Date: Tue, 20 Sep 2022 14:11:54 +0200
-Subject: [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Reset COMPHY registers
- before USB 3.0 power on
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Turris MOX board with older ARM Trusted Firmware version v1.5 is not able
-to detect any USB 3.0 device connected to USB-A port on Mox-A module after
-commit 0a6fc70d76bd ("phy: marvell: phy-mvebu-a3700-comphy: Remove broken
-reset support"). On the other hand USB 2.0 devices connected to the same
-USB-A port are working fine.
-
-It looks as if the older firmware configures COMPHY registers for USB 3.0
-somehow incompatibly for kernel driver. Experiments show that resetting
-COMPHY registers via setting SFT_RST auto-clearing bit in COMPHY_SFT_RESET
-register fixes this issue.
-
-Reset the COMPHY in mvebu_a3700_comphy_usb3_power_on() function as a first
-step after selecting COMPHY lane and USB 3.0 function. With this change
-Turris MOX board can successfully detect USB 3.0 devices again.
-
-Before the above mentioned commit this reset was implemented in PHY reset
-method, so this is the reason why there was no issue with older firmware
-version then.
-
-Fixes: 0a6fc70d76bd ("phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support")
-Reported-by: Marek Behún <kabel at kernel.org>
-Signed-off-by: Pali Rohár <pali at kernel.org>
-Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki at wdc.com>
-Link: https://lore.kernel.org/r/20220920121154.30115-1-pali@kernel.org
-Signed-off-by: Vinod Koul <vkoul at kernel.org>
----
- drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
-+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
-@@ -826,6 +826,9 @@ mvebu_a3700_comphy_usb3_power_on(struct
- if (ret)
- return ret;
-
-+ /* COMPHY register reset (cleared automatically) */
-+ comphy_lane_reg_set(lane, COMPHY_SFT_RESET, SFT_RST, SFT_RST);
-+
- /*
- * 0. Set PHY OTG Control(0x5d034), bit 4, Power up OTG module The
- * register belong to UTMI module, so it is set in UTMI phy driver.
diff --git a/target/linux/mvebu/patches-6.1/801-pci-mvebu-time-out-reset-on-link-up.patch b/target/linux/mvebu/patches-6.1/801-pci-mvebu-time-out-reset-on-link-up.patch
index dba1253699..d2995b375c 100644
--- a/target/linux/mvebu/patches-6.1/801-pci-mvebu-time-out-reset-on-link-up.patch
+++ b/target/linux/mvebu/patches-6.1/801-pci-mvebu-time-out-reset-on-link-up.patch
@@ -13,7 +13,7 @@ Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
-@@ -1023,6 +1023,7 @@ static int mvebu_pcie_powerup(struct mve
+@@ -1414,6 +1414,7 @@ static int mvebu_pcie_powerup(struct mve
if (port->reset_gpio) {
u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
@@ -21,7 +21,7 @@ Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
of_property_read_u32(port->dn, "reset-delay-us",
&reset_udelay);
-@@ -1030,7 +1031,13 @@ static int mvebu_pcie_powerup(struct mve
+@@ -1421,7 +1422,13 @@ static int mvebu_pcie_powerup(struct mve
udelay(100);
gpiod_set_value_cansleep(port->reset_gpio, 0);
@@ -36,7 +36,7 @@ Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
}
return 0;
-@@ -1190,15 +1197,16 @@ static int mvebu_pcie_probe(struct platf
+@@ -1538,15 +1545,16 @@ static int mvebu_pcie_probe(struct platf
if (!child)
continue;
diff --git a/target/linux/mvebu/patches-6.1/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch b/target/linux/mvebu/patches-6.1/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch
index 3446086cad..fc5c804582 100644
--- a/target/linux/mvebu/patches-6.1/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch
+++ b/target/linux/mvebu/patches-6.1/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch
@@ -207,7 +207,7 @@ Cc: Robert Marko <robert.marko at sartura.hr>
+ };
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
-@@ -519,6 +519,8 @@ patternProperties:
+@@ -579,6 +579,8 @@ patternProperties:
description: IC Plus Corp.
"^idt,.*":
description: Integrated Device Technologies, Inc.
diff --git a/target/linux/mvebu/patches-6.1/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch b/target/linux/mvebu/patches-6.1/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch
index 0e546b426e..d213404250 100644
--- a/target/linux/mvebu/patches-6.1/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch
+++ b/target/linux/mvebu/patches-6.1/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch
@@ -16,17 +16,17 @@ Signed-off-by: Pavo Banicevic <pavo.banicevic at sartura.hr>
Cc: Luka Perkov <luka.perkov at sartura.hr>
Cc: Robert Marko <robert.marko at sartura.hr>
---
- drivers/mfd/Kconfig | 8 +
+ drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 1 +
drivers/mfd/iei-wt61p803-puzzle.c | 908 ++++++++++++++++++++++++
include/linux/mfd/iei-wt61p803-puzzle.h | 66 ++
- 4 files changed, 983 insertions(+)
+ 4 files changed, 984 insertions(+)
create mode 100644 drivers/mfd/iei-wt61p803-puzzle.c
create mode 100644 include/linux/mfd/iei-wt61p803-puzzle.h
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
-@@ -2189,6 +2189,15 @@ config SGI_MFD_IOC3
+@@ -2221,6 +2221,15 @@ config SGI_MFD_IOC3
If you have an SGI Origin, Octane, or a PCI IOC3 card,
then say Y. Otherwise say N.
@@ -44,14 +44,14 @@ Cc: Robert Marko <robert.marko at sartura.hr>
depends on SPI_MASTER
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
-@@ -237,6 +237,7 @@ obj-$(CONFIG_MFD_DLN2) += dln2.o
- obj-$(CONFIG_MFD_RT4831) += rt4831.o
+@@ -244,6 +244,7 @@ obj-$(CONFIG_MFD_RT4831) += rt4831.o
obj-$(CONFIG_MFD_RT5033) += rt5033.o
+ obj-$(CONFIG_MFD_RT5120) += rt5120.o
obj-$(CONFIG_MFD_SKY81452) += sky81452.o
-+obj-$(CONFIG_MFD_IEI_WT61P803_PUZZLE) += iei-wt61p803-puzzle.o
++obj-$(CONFIG_MFD_IEI_WT61P803_PUZZLE) += iei-wt61p803-puzzle.o
- intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
- obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
+ obj-$(CONFIG_INTEL_SOC_PMIC) += intel_soc_pmic_crc.o
+ obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o
--- /dev/null
+++ b/drivers/mfd/iei-wt61p803-puzzle.c
@@ -0,0 +1,908 @@
diff --git a/target/linux/mvebu/patches-6.1/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch b/target/linux/mvebu/patches-6.1/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch
index 023495373b..a11b387d92 100644
--- a/target/linux/mvebu/patches-6.1/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch
+++ b/target/linux/mvebu/patches-6.1/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch
@@ -20,13 +20,13 @@ Cc: Robert Marko <robert.marko at sartura.hr>
---
drivers/hwmon/Kconfig | 8 +
drivers/hwmon/Makefile | 1 +
- drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 413 ++++++++++++++++++++++
- 3 files changed, 422 insertions(+)
+ drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 445 ++++++++++++++++++++++
+ 3 files changed, 454 insertions(+)
create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
-@@ -732,6 +732,14 @@ config SENSORS_IBMPOWERNV
+@@ -755,6 +755,14 @@ config SENSORS_IBMPOWERNV
This driver can also be built as a module. If so, the module
will be called ibmpowernv.
@@ -43,7 +43,7 @@ Cc: Robert Marko <robert.marko at sartura.hr>
depends on IIO
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
-@@ -84,6 +84,7 @@ obj-$(CONFIG_SENSORS_HIH6130) += hih6130
+@@ -87,6 +87,7 @@ obj-$(CONFIG_SENSORS_HIH6130) += hih6130
obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o
obj-$(CONFIG_SENSORS_I5500) += i5500_temp.o
obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o
diff --git a/target/linux/mvebu/patches-6.1/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch b/target/linux/mvebu/patches-6.1/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch
index a3fc731c47..ec783256e3 100644
--- a/target/linux/mvebu/patches-6.1/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch
+++ b/target/linux/mvebu/patches-6.1/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch
@@ -30,7 +30,7 @@ Cc: Robert Marko <robert.marko at sartura.hr>
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
-@@ -306,6 +306,14 @@ config LEDS_IPAQ_MICRO
+@@ -299,6 +299,14 @@ config LEDS_IPAQ_MICRO
Choose this option if you want to use the notification LED on
Compaq/HP iPAQ h3100 and h3600.
@@ -47,7 +47,7 @@ Cc: Robert Marko <robert.marko at sartura.hr>
depends on LEDS_CLASS
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
-@@ -33,6 +33,7 @@ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.
+@@ -32,6 +32,7 @@ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.
obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
obj-$(CONFIG_LEDS_IP30) += leds-ip30.o
obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o
diff --git a/target/linux/mvebu/patches-6.1/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch b/target/linux/mvebu/patches-6.1/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch
index 9015436f6a..0f1a6f306b 100644
--- a/target/linux/mvebu/patches-6.1/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch
+++ b/target/linux/mvebu/patches-6.1/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch
@@ -64,11 +64,11 @@ Cc: Robert Marko <robert.marko at sartura.hr>
+================= == =====================================================
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
-@@ -74,6 +74,7 @@ Hardware Monitoring Kernel Drivers
+@@ -77,6 +77,7 @@ Hardware Monitoring Kernel Drivers
ibmaem
ibm-cffps
ibmpowernv
+ iei-wt61p803-puzzle-hwmon
ina209
ina2xx
- ina3221
+ ina238
diff --git a/target/linux/mvebu/patches-6.1/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch b/target/linux/mvebu/patches-6.1/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch
index b8accf180b..e72df378ef 100644
--- a/target/linux/mvebu/patches-6.1/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch
+++ b/target/linux/mvebu/patches-6.1/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch
@@ -16,7 +16,7 @@ Cc: Robert Marko <robert.marko at sartura.hr>
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -9063,6 +9063,22 @@ F: include/net/nl802154.h
+@@ -9900,6 +9900,22 @@ F: include/net/nl802154.h
F: net/ieee802154/
F: net/mac802154/
More information about the lede-commits
mailing list