[openwrt/openwrt] ramips: add support for D-Link DAP-1620 B1
LEDE Commits
lede-commits at lists.infradead.org
Sat Apr 29 13:06:38 PDT 2023
hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/e4c7703d2a62b8914e4723adae3f67c68a57532c
commit e4c7703d2a62b8914e4723adae3f67c68a57532c
Author: Rani Hod <rani.hod at gmail.com>
AuthorDate: Sun Apr 9 22:47:58 2023 +0300
ramips: add support for D-Link DAP-1620 B1
The DAP-1620 rev B is a wall-plug AC1300 repeater.
Specifications:
- MT7621AT, 256 MiB RAM, 16 MiB SPI NOR
- MT7615DN 2x2 802.11n +2x2 802.11ac (DBDC)
- Ethernet: 1 port 10/100/1000
- Status LEDs (1x red+green)
- LED RSSI bargraph (2x green, 1x red+green)
Installation:
- Keep reset button pressed during plug-in
- Web Recovery Updater is at 192.168.0.50
- Upload factory.bin, confirm flashing
(seems to work best with Chromium-based browsers)
Revert to OEM firmware:
- tail -c+117 DAP1620B1_FW212B03.bin | \
openssl aes-256-cbc -d -md md5 -out decrypted.bin \
-k 905503a4e0c3cd3c1ce062246de427a68962347e
- flash decrypted.bin via D-Link Web Recovery
Signed-off-by: Rani Hod <rani.hod at gmail.com>
---
include/image-commands.mk | 7 +
.../linux/ramips/dts/mt7621_dlink_dap-1620-b1.dts | 158 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 18 ++-
.../ramips/mt7621/base-files/etc/board.d/01_leds | 7 +
.../mt7621/base-files/etc/board.d/02_network | 1 +
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 15 +-
6 files changed, 198 insertions(+), 8 deletions(-)
diff --git a/include/image-commands.mk b/include/image-commands.mk
index 47d9d1ab88..0c13f30fef 100644
--- a/include/image-commands.mk
+++ b/include/image-commands.mk
@@ -126,6 +126,13 @@ define Build/append-string
echo -n $(1) >> $@
endef
+define Build/append-md5sum-ascii-salted
+ cp $@ $@.salted
+ echo -ne $(1) >> $@.salted
+ $(STAGING_DIR_HOST)/bin/mkhash md5 $@.salted | head -c32 >> $@
+ rm $@.salted
+endef
+
define Build/append-ubi
sh $(TOPDIR)/scripts/ubinize-image.sh \
$(if $(UBOOTENV_IN_UBI),--uboot-env) \
diff --git a/target/linux/ramips/dts/mt7621_dlink_dap-1620-b1.dts b/target/linux/ramips/dts/mt7621_dlink_dap-1620-b1.dts
new file mode 100644
index 0000000000..919e5be4b9
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_dlink_dap-1620-b1.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dap-1620-b1", "mediatek,mt7621-soc";
+ model = "D-Link DAP-1620 B1";
+
+ aliases {
+ label-mac-device = &gmac0;
+
+ led-boot = &led_status_red;
+ led-failsafe = &led_status_green;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi_low_red {
+ label = "red:rssilow";
+ gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi_low_green {
+ label = "green:rssilow";
+ gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi_med_green {
+ label = "green:rssimed";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi_high_green {
+ label = "green:rssihigh";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_e000: macaddr at e000 {
+ reg = <0xe000 0x6>;
+ };
+ };
+
+ partition at 50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ /* The correct MAC addresses are set in 10_fix_wifi_mac. */
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&switch0 {
+ ports {
+ port at 0 {
+ status = "okay";
+ label = "lan";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
+};
+
+&state_default {
+ gpio {
+ groups = "uart3", "jtag", "wdt";
+ function = "gpio";
+ };
+};
+
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 96bfab3fef..c362046b8e 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -7,7 +7,7 @@ include ./common-tp-link.mk
DEFAULT_SOC := mt7621
-DEVICE_VARS += ELECOM_HWNAME LINKSYS_HWNAME
+DEVICE_VARS += ELECOM_HWNAME LINKSYS_HWNAME DLINK_HWID
ifdef CONFIG_LINUX_5_10
DTS_CPPFLAGS += -DDTS_LEGACY
@@ -554,6 +554,22 @@ define Device/cudy_x6
endef
TARGET_DEVICES += cudy_x6
+define Device/dlink_dap-1620-b1
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DAP-1620
+ DEVICE_VARIANT := B1
+ DEVICE_PACKAGES := kmod-mt7615-firmware rssileds
+ DLINK_HWID := MT76XMT7621-RP-PR2475-NA
+ IMAGE_SIZE := 16064k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(sysupgrade_bin) | \
+ check-size 11009992 | pad-to 11009992 | \
+ append-md5sum-ascii-salted ffff | \
+ append-string $$(DLINK_HWID) | \
+ check-size
+endef
+TARGET_DEVICES += dlink_dap-1620-b1
+
define Device/dlink_dap-x1860-a1
$(Device/dsa-migration)
IMAGE_SIZE := 53248k
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 59150bd514..726d26f077 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -60,6 +60,13 @@ jcg,y2|\
xzwifi,creativebox-v1)
ucidef_set_led_netdev "internet" "internet" "blue:internet" "wan"
;;
+dlink,dap-1620-b1)
+ ucidef_set_rssimon "wlan1" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "red:rssilow" "wlan1" "1" "40"
+ ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:rssilow" "wlan1" "21" "100"
+ ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssimed" "wlan1" "61" "100"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan1" "81" "100"
+ ;;
dlink,dap-x1860-a1)
ucidef_set_rssimon "wlan1" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "orange:rssilow" "wlan1" "1" "25"
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 39c8080e83..871d7fc7d9 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -14,6 +14,7 @@ ramips_setup_interfaces()
ampedwireless,ally-00x19k|\
asus,rp-ac56|\
asus,rp-ac87|\
+ dlink,dap-1620-b1|\
dlink,dap-x1860-a1|\
edimax,re23s|\
mikrotik,ltap-2hnd|\
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index f042830e02..9db115fcae 100644
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -32,13 +32,7 @@ case "$board" in
[ "$PHYNBR" = "1" ] && \
macaddr_setbit_la "$(macaddr_add $hw_mac_addr 0x100000)" > /sys${DEVPATH}/macaddress
;;
- dlink,dap-x1860-a1)
- hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
- [ "$PHYNBR" = "0" ] && \
- macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
- [ "$PHYNBR" = "1" ] && \
- macaddr_add $hw_mac_addr 4 > /sys${DEVPATH}/macaddress
- ;;
+ dlink,dap-1620-b1|\
dlink,dir-853-a1)
lan_mac_addr="$(mtd_get_mac_binary factory 0xe000)"
[ "$PHYNBR" = "0" ] && \
@@ -46,6 +40,13 @@ case "$board" in
[ "$PHYNBR" = "1" ] && \
macaddr_add $lan_mac_addr 2 > /sys${DEVPATH}/macaddress
;;
+ dlink,dap-x1860-a1)
+ hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
+ [ "$PHYNBR" = "0" ] && \
+ macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && \
+ macaddr_add $hw_mac_addr 4 > /sys${DEVPATH}/macaddress
+ ;;
dlink,dir-853-a3)
[ "$PHYNBR" = "0" ] && \
macaddr_setbit_la "$(mtd_get_mac_binary factory 0xe000)" \
More information about the lede-commits
mailing list