[openwrt/openwrt] umbim: add support for non-dhcp mode

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/512bb17f3e2a15d52191bb45d63c8d8739f85584

commit 512bb17f3e2a15d52191bb45d63c8d8739f85584
Author: Martin Schiller <ms at dev.tdt.de>
AuthorDate: Fri Feb 7 12:50:22 2020 +0100

    umbim: add support for non-dhcp mode
    
    There are mbim compatible wwan modules available which do not support
    the dhcp autoconfiguration. (e.g. gemalto Cinterion ELS81)
    
    This adds the possibility to get the configuration parameters from mbim.
    
    Signed-off-by: Martin Schiller <ms at dev.tdt.de>
    Signed-off-by: Lech Perczak <lech.perczak at gmail.com>
---
 .../utils/umbim/files/lib/netifd/proto/mbim.sh     | 86 ++++++++++++++++------
 1 file changed, 64 insertions(+), 22 deletions(-)

diff --git a/package/network/utils/umbim/files/lib/netifd/proto/mbim.sh b/package/network/utils/umbim/files/lib/netifd/proto/mbim.sh
index 64bb8176a0..492e06829d 100755
--- a/package/network/utils/umbim/files/lib/netifd/proto/mbim.sh
+++ b/package/network/utils/umbim/files/lib/netifd/proto/mbim.sh
@@ -19,6 +19,7 @@ proto_mbim_init_config() {
 	proto_config_add_string auth
 	proto_config_add_string username
 	proto_config_add_string password
+	proto_config_add_boolean dhcp
 	proto_config_add_defaults
 }
 
@@ -27,8 +28,8 @@ _proto_mbim_setup() {
 	local tid=2
 	local ret
 
-	local device apn pincode delay allow_roaming allow_partner $PROTO_DEFAULT_OPTIONS
-	json_get_vars device apn pincode delay auth username password allow_roaming allow_partner $PROTO_DEFAULT_OPTIONS
+	local device apn pincode delay allow_roaming allow_partner dhcp $PROTO_DEFAULT_OPTIONS
+	json_get_vars device apn pincode delay auth username password allow_roaming allow_partner dhcp $PROTO_DEFAULT_OPTIONS
 
 	[ -n "$ctl_device" ] && device=$ctl_device
 
@@ -153,28 +154,69 @@ _proto_mbim_setup() {
 	done
 	tid=$((tid + 1))
 
-	uci_set_state network $interface tid "$tid"
+	echo "mbim[$$]" "Connected"
 
-	echo "mbim[$$]" "Connected, starting DHCP"
-	proto_init_update "$ifname" 1
-	proto_send_update "$interface"
+	if [ "$dhcp" = 0 ]; then
+		echo "mbim[$$]" "Setting up $ifname"
+		eval $(umbim $DBG -n -t $tid -d $device config | sed 's/: /=/g')
+		tid=$((tid + 1))
 
-	json_init
-	json_add_string name "${interface}_4"
-	json_add_string ifname "@$interface"
-	json_add_string proto "dhcp"
-	proto_add_dynamic_defaults
-	json_close_object
-	ubus call network add_dynamic "$(json_dump)"
-
-	json_init
-	json_add_string name "${interface}_6"
-	json_add_string ifname "@$interface"
-	json_add_string proto "dhcpv6"
-	json_add_string extendprefix 1
-	proto_add_dynamic_defaults
-	json_close_object
-	ubus call network add_dynamic "$(json_dump)"
+		proto_init_update "$ifname" 1
+		proto_send_update "$interface"
+
+		json_init
+		json_add_string name "${interface}_4"
+		json_add_string ifname "@$interface"
+		json_add_string proto "static"
+		json_add_array ipaddr
+		json_add_string "" "$ipv4address"
+		json_close_array
+		json_add_string gateway "$ipv4gateway"
+		json_add_array dns
+		json_add_string "" "$ipv4dnsserver"
+		json_close_array
+		proto_add_dynamic_defaults
+		json_close_object
+		ubus call network add_dynamic "$(json_dump)"
+
+		json_init
+		json_add_string name "${interface}_6"
+		json_add_string ifname "@$interface"
+		json_add_string proto "static"
+		json_add_array ip6addr
+		json_add_string "" "$ipv6address"
+		json_close_array
+		json_add_string ip6gw "$ipv6gateway"
+		json_add_array dns
+		json_add_string "" "$ipv6dnsserver"
+		json_close_array
+		proto_add_dynamic_defaults
+		json_close_object
+		ubus call network add_dynamic "$(json_dump)"
+	else
+		echo "mbim[$$]" "Starting DHCP on $ifname"
+		proto_init_update "$ifname" 1
+		proto_send_update "$interface"
+
+		json_init
+		json_add_string name "${interface}_4"
+		json_add_string ifname "@$interface"
+		json_add_string proto "dhcp"
+		proto_add_dynamic_defaults
+		json_close_object
+		ubus call network add_dynamic "$(json_dump)"
+
+		json_init
+		json_add_string name "${interface}_6"
+		json_add_string ifname "@$interface"
+		json_add_string proto "dhcpv6"
+		json_add_string extendprefix 1
+		proto_add_dynamic_defaults
+		json_close_object
+		ubus call network add_dynamic "$(json_dump)"
+	fi
+
+	uci_set_state network $interface tid "$tid"
 }
 
 proto_mbim_setup() {