[openwrt/openwrt] generic: add quirk for HG MXPD-483II 2500M fiber SFP
LEDE Commits
lede-commits at lists.infradead.org
Sun Apr 2 16:13:08 PDT 2023
dangole pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/658b45ce48d2e96c3bca20343272465e295ccb92
commit 658b45ce48d2e96c3bca20343272465e295ccb92
Author: Daniel Golle <daniel at makrotopia.org>
AuthorDate: Mon Apr 3 00:06:46 2023 +0100
generic: add quirk for HG MXPD-483II 2500M fiber SFP
The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X,
however, in their EEPROM they incorrectly specify:
Transceiver type : Ethernet: 1000BASE-LX
...
BR, Nominal : 2600MBd
Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.
https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60
X-Patchwork-Id: 13197378
X-Mailing-List: netdev at vger.kernel.org
X-Patchwork-Delegate: kuba at kernel.org
Reported-by: chowtom <chowtom at gmail.com>
Tested-by: chowtom <chowtom at gmail.com>
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
.../generic/hack-5.15/790-SFP-GE-T-ignore-TX_FAULT.patch | 6 +++---
.../pending-5.15/701-net-sfp-add-quirk-for-MXPD-483II.patch | 13 +++++++++++++
2 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/target/linux/generic/hack-5.15/790-SFP-GE-T-ignore-TX_FAULT.patch b/target/linux/generic/hack-5.15/790-SFP-GE-T-ignore-TX_FAULT.patch
index 83b2c304e2..8ad43c0fe9 100644
--- a/target/linux/generic/hack-5.15/790-SFP-GE-T-ignore-TX_FAULT.patch
+++ b/target/linux/generic/hack-5.15/790-SFP-GE-T-ignore-TX_FAULT.patch
@@ -26,7 +26,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
-@@ -373,6 +373,11 @@ static const struct sfp_quirk sfp_quirks
+@@ -377,6 +377,11 @@ static const struct sfp_quirk sfp_quirks
.modes = sfp_quirk_2500basex,
.fixup = sfp_fixup_ignore_tx_fault,
}, {
@@ -38,7 +38,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
// Lantech 8330-262D-E can operate at 2500base-X, but
// incorrectly report 2500MBd NRZ in their EEPROM
.vendor = "Lantech",
-@@ -2306,7 +2311,8 @@ static void sfp_sm_main(struct sfp *sfp,
+@@ -2310,7 +2315,8 @@ static void sfp_sm_main(struct sfp *sfp,
* or t_start_up, so assume there is a fault.
*/
sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
@@ -48,7 +48,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
init_done:
sfp->sm_phy_retries = R_PHY_RETRY;
-@@ -2529,10 +2535,12 @@ static void sfp_check_state(struct sfp *
+@@ -2533,10 +2539,12 @@ static void sfp_check_state(struct sfp *
mutex_lock(&sfp->st_mutex);
state = sfp_get_state(sfp);
changed = state ^ sfp->state;
diff --git a/target/linux/generic/pending-5.15/701-net-sfp-add-quirk-for-MXPD-483II.patch b/target/linux/generic/pending-5.15/701-net-sfp-add-quirk-for-MXPD-483II.patch
new file mode 100644
index 0000000000..86a665fd0a
--- /dev/null
+++ b/target/linux/generic/pending-5.15/701-net-sfp-add-quirk-for-MXPD-483II.patch
@@ -0,0 +1,13 @@
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -366,6 +366,10 @@ static const struct sfp_quirk sfp_quirks
+ .part = "HL-GSFP",
+ .fixup = sfp_fixup_halny_gsfp,
+ }, {
++ .vendor = "HG GENUINE",
++ .part = "MXPD-483II",
++ .modes = sfp_quirk_2500basex,
++ }, {
+ // Huawei MA5671A can operate at 2500base-X, but report 1.2GBd
+ // NRZ in their EEPROM
+ .vendor = "HUAWEI",
More information about the lede-commits
mailing list