[openwrt/openwrt] mac80211: clean and submit a bunch of rt2x00 patches
LEDE Commits
lede-commits at lists.infradead.org
Fri Sep 16 16:44:57 PDT 2022
dangole pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/e785ca05e9f0502894772f5df92192b816ba5d7c
commit e785ca05e9f0502894772f5df92192b816ba5d7c
Author: Daniel Golle <daniel at makrotopia.org>
AuthorDate: Sat Sep 17 00:33:30 2022 +0100
mac80211: clean and submit a bunch of rt2x00 patches
Clean and submit patches, mostly related to MT7620 to linux-wireless
mailing list:
https://patchwork.kernel.org/project/linux-wireless/list/?series=677770
Replace local patches with now submitted versions.
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
...2x00-define-RF5592-in-init_eeprom-routine.patch | 41 +-
.../612-rt2x00-add-throughput-LED-trigger.patch | 29 +-
...x00-add-support-for-external-PA-on-MT7620.patch | 57 +--
.../982-rt2x00-add-RF-self-TXDC-calibration.patch | 35 +-
.../rt2x00/983-rt2x00-add-r-calibration.patch | 36 +-
.../rt2x00/984-rt2x00-add-RXDCOC-calibration.patch | 30 +-
.../rt2x00/985-rt2x00-add-RXIQ-calibration.patch | 115 +++---
...don-t-run-Rt5592-IQ-calibration-on-MT7620.patch | 35 ++
...ch => 987-rt2x00-add-TX-LOFT-calibration.patch} | 210 +++++-----
...8-rt2x00-move-helper-functions-up-in-file.patch | 78 ++++
...-fix-HT20-HT40-bandwidth-switch-on-MT7620.patch | 40 ++
...correct-TX_SW_CFG1-MAC-register-for-MT762.patch | 35 ++
...00-set-VGC-gain-for-both-chains-of-MT7620.patch | 34 ++
.../patches/rt2x00/992-rt2x00-more-fixes.patch | 423 ---------------------
.../992-rt2x00-set-SoC-wmac-clock-register.patch | 54 +++
...-correctly-set-BBP-register-86-for-MT7620.patch | 36 ++
...import-support-for-external-LNA-on-MT7620.patch | 161 ++++++++
...ntroduce-accessors-for-CHIP_VER-register.patch} | 0
...7620-differentiate-based-on-SoC-CHIP_VER.patch} | 22 +-
19 files changed, 791 insertions(+), 680 deletions(-)
diff --git a/package/kernel/mac80211/patches/rt2x00/002-rt2x00-define-RF5592-in-init_eeprom-routine.patch b/package/kernel/mac80211/patches/rt2x00/002-rt2x00-define-RF5592-in-init_eeprom-routine.patch
index 96eeb37dc6..df4aab0d95 100644
--- a/package/kernel/mac80211/patches/rt2x00/002-rt2x00-define-RF5592-in-init_eeprom-routine.patch
+++ b/package/kernel/mac80211/patches/rt2x00/002-rt2x00-define-RF5592-in-init_eeprom-routine.patch
@@ -1,26 +1,21 @@
-From patchwork Thu Dec 27 14:05:26 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 8bit
-X-Patchwork-Submitter: Tom Psyborg <pozega.tomislav at gmail.com>
-X-Patchwork-Id: 10743707
-X-Patchwork-Delegate: kvalo at adurom.com
-From: =?utf-8?q?Tomislav_Po=C5=BEega?= <pozega.tomislav at gmail.com>
-To: linux-wireless at vger.kernel.org
-Cc: kvalo at codeaurora.org, hauke at hauke-m.de, nbd at nbd.name,
- john at phrozen.org, sgruszka at redhat.com, daniel at makrotopia.org
-Subject: [PATCH 2/2] rt2x00: define RF5592 in init_eeprom routine
+From 15eed6b853b7e06f08632ef3cbe6cc42ac3eb858 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
Date: Thu, 27 Dec 2018 15:05:26 +0100
-Message-Id: <1545919526-4074-2-git-send-email-pozega.tomislav at gmail.com>
-X-Mailer: git-send-email 1.7.0.4
-In-Reply-To: <1545919526-4074-1-git-send-email-pozega.tomislav at gmail.com>
-References: <1545919526-4074-1-git-send-email-pozega.tomislav at gmail.com>
+Subject: [PATCH 01/16] rt2x00: define RF5592 in init_eeprom routine
MIME-Version: 1.0
-Sender: linux-wireless-owner at vger.kernel.org
-Precedence: bulk
-List-ID: <linux-wireless.vger.kernel.org>
-X-Mailing-List: linux-wireless at vger.kernel.org
-X-Virus-Scanned: ClamAV using ClamSMTP
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
+
+From: Tomislav Požega <pozega.tomislav at gmail.com>
This patch fixes following crash on Linksys EA2750 during 5GHz wifi
init:
@@ -35,8 +30,8 @@ init:
Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
---
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++
+ 1 file changed, 2 insertions(+)
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
diff --git a/package/kernel/mac80211/patches/rt2x00/612-rt2x00-add-throughput-LED-trigger.patch b/package/kernel/mac80211/patches/rt2x00/612-rt2x00-add-throughput-LED-trigger.patch
index f27873acc0..c9cada6dbd 100644
--- a/package/kernel/mac80211/patches/rt2x00/612-rt2x00-add-throughput-LED-trigger.patch
+++ b/package/kernel/mac80211/patches/rt2x00/612-rt2x00-add-throughput-LED-trigger.patch
@@ -1,16 +1,28 @@
-From: David Bauer <mail at david-bauer.net>
+From 208be6e22eba13408a0a3eb4c02256bc9ddfaf48 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
Date: Mon, 16 Dec 2019 20:47:06 +0100
-Subject: [PATCH] rt2x00: add throughput LED trigger
+Subject: [PATCH 02/16] rt2x00: add throughput LED trigger
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
+
+From: David Bauer <mail at david-bauer.net>
This adds a (currently missing) throughput LED trigger for the rt2x00
driver. Previously, LED triggers had to be assigned to the netdev, which
was limited to a single VAP.
-Signed-off-by: David Bauer <mail at david-bauer.net>
Tested-by: Christoph Krapp <achterin at googlemail.com>
+Signed-off-by: David Bauer <mail at david-bauer.net>
---
- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
+ drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 18 ++++++++++++++++++
+ 1 file changed, 18 insertions(+)
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -34,13 +46,14 @@ Tested-by: Christoph Krapp <achterin at googlemail.com>
static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
-@@ -1206,6 +1219,10 @@ static int rt2x00lib_probe_hw(struct rt2
+@@ -1206,6 +1219,11 @@ static int rt2x00lib_probe_hw(struct rt2
#undef RT2X00_TASKLET_INIT
+ ieee80211_create_tpt_led_trigger(rt2x00dev->hw,
-+ IEEE80211_TPT_LEDTRIG_FL_RADIO, rt2x00_tpt_blink,
-+ ARRAY_SIZE(rt2x00_tpt_blink));
++ IEEE80211_TPT_LEDTRIG_FL_RADIO,
++ rt2x00_tpt_blink,
++ ARRAY_SIZE(rt2x00_tpt_blink));
+
/*
* Register HW.
diff --git a/package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch
index 8814c02532..fe023cf77a 100644
--- a/package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch
+++ b/package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch
@@ -1,22 +1,29 @@
-From 9782a7f7488443568fa4d6088b73c9aff7eb8510 Mon Sep 17 00:00:00 2001
+From 8dcdb02e3ad5f3d384c071e0a36670bb342bab35 Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel at makrotopia.org>
Date: Wed, 19 Apr 2017 16:14:53 +0200
-Subject: [PATCH] rt2x00: add support for external PA on MT7620
-To: Stanislaw Gruszka <sgruszka at redhat.com>
-Cc: Helmut Schaa <helmut.schaa at googlemail.com>,
- linux-wireless at vger.kernel.org,
- Kalle Valo <kvalo at codeaurora.org>
-Content-Type: text/plain; charset="UTF-8"
-Content-Transfer-Encoding: quoted-printable
+Subject: [PATCH 03/16] rt2x00: add support for external PA on MT7620
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
-Signed-off-by: Daniel Golle <daniel at makrotopia.org>
-Signed-off-by: Tomislav Po=C5=BEega <pozega.tomislav at gmail.com>
-[pozega.tomislav at gmail.com: use chanreg and dccal helpers.]
+Implement support for external PA connected to MT7620A.
+Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+[pozega.tomislav at gmail.com: use chanreg and dccal helpers.]
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
- drivers/net/wireless/ralink/rt2x00/rt2800.h | 1 +
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 70 +++++++++++++++++++++++++-
- 2 files changed, 70 insertions(+), 1 deletion(-)
+ drivers/net/wireless/ralink/rt2x00/rt2800.h | 1 +
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 52 ++++++++++++++++++-
+ 2 files changed, 52 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -24,21 +31,19 @@ Signed-off-by: Tomislav Po=C5=BEega <pozega.tomislav at gmail.com>
#define EEPROM_NIC_CONF2_RX_STREAM FIELD16(0x000f)
#define EEPROM_NIC_CONF2_TX_STREAM FIELD16(0x00f0)
#define EEPROM_NIC_CONF2_CRYSTAL FIELD16(0x0600)
-+#define EEPROM_NIC_CONF2_EXTERNAL_PA FIELD16(0xc000)
++#define EEPROM_NIC_CONF2_EXTERNAL_PA FIELD16(0x8000)
/*
* EEPROM LNA
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -4369,6 +4369,45 @@ static void rt2800_config_channel(struct
+@@ -4369,6 +4369,43 @@ static void rt2800_config_channel(struct
rt2800_iq_calibrate(rt2x00dev, rf->channel);
}
+ if (rt2x00_rt(rt2x00dev, RT6352)) {
+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0,
+ &rt2x00dev->cap_flags)) {
-+ rt2x00_warn(rt2x00dev, "Using incomplete support for " \
-+ "external PA\n");
+ reg = rt2800_register_read(rt2x00dev, RF_CONTROL3);
+ reg |= 0x00000101;
+ rt2800_register_write(rt2x00dev, RF_CONTROL3, reg);
@@ -76,7 +81,7 @@ Signed-off-by: Tomislav Po=C5=BEega <pozega.tomislav at gmail.com>
bbp = rt2800_bbp_read(rt2x00dev, 4);
rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
rt2800_bbp_write(rt2x00dev, 4, bbp);
-@@ -9578,7 +9617,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9578,7 +9615,8 @@ static int rt2800_init_eeprom(struct rt2
*/
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
@@ -86,19 +91,19 @@ Signed-off-by: Tomislav Po=C5=BEega <pozega.tomislav at gmail.com>
if (rt2x00_get_field16(eeprom,
EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352))
__set_bit(CAPABILITY_EXTERNAL_PA_TX0,
-@@ -9589,6 +9629,18 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9589,6 +9627,18 @@ static int rt2800_init_eeprom(struct rt2
&rt2x00dev->cap_flags);
}
+ eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF2);
+
+ if (rt2x00_rt(rt2x00dev, RT6352) && eeprom != 0 && eeprom != 0xffff) {
-+ if (rt2x00_get_field16(eeprom,
-+ EEPROM_NIC_CONF2_EXTERNAL_PA)) {
-+ __set_bit(CAPABILITY_EXTERNAL_PA_TX0,
-+ &rt2x00dev->cap_flags);
-+ __set_bit(CAPABILITY_EXTERNAL_PA_TX1,
-+ &rt2x00dev->cap_flags);
++ if (!rt2x00_get_field16(eeprom,
++ EEPROM_NIC_CONF2_EXTERNAL_PA)) {
++ __clear_bit(CAPABILITY_EXTERNAL_PA_TX0,
++ &rt2x00dev->cap_flags);
++ __clear_bit(CAPABILITY_EXTERNAL_PA_TX1,
++ &rt2x00dev->cap_flags);
+ }
+ }
+
diff --git a/package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-RF-self-TXDC-calibration.patch b/package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-RF-self-TXDC-calibration.patch
index b74bea2020..ed8a737a4c 100644
--- a/package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-RF-self-TXDC-calibration.patch
+++ b/package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-RF-self-TXDC-calibration.patch
@@ -1,20 +1,32 @@
-From: =?UTF-8?q?Tomislav=20Po=C5=BEega?= <pozega.tomislav at gmail.com>
+From 21f2acf0f9e9da35fbdb96ee0aea97b02472030b Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
Date: Mon, 8 Jan 2018 13:42:27 +0100
-Subject: [PATCH] rt2x00: add RF self TXDC calibration
+Subject: [PATCH 04/16] rt2x00: add RF self TXDC calibration for MT7620
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
+
+From: Tomislav Požega <pozega.tomislav at gmail.com>
Add TX self calibration based on mtk driver.
Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
---
- .../net/wireless/ralink/rt2x00/rt2800lib.c | 51 +++++++++++++++++++
- 1 file changed, 51 insertions(+)
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 48 +++++++++++++++++++
+ 1 file changed, 48 insertions(+)
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8438,6 +8438,56 @@ static void rt2800_init_rfcsr_5592(struc
+@@ -8436,6 +8436,53 @@ static void rt2800_init_rfcsr_5592(struc
rt2800_led_open_drain_enable(rt2x00dev);
}
@@ -24,7 +36,6 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ u32 mac0518, mac051c, mac0528, mac052c;
+ u8 i;
+
-+ rt2x00_info(rt2x00dev, "RF Tx self calibration start\n");
+ mac0518 = rt2800_register_read(rt2x00dev, RF_CONTROL0);
+ mac051c = rt2800_register_read(rt2x00dev, RF_BYPASS0);
+ mac0528 = rt2800_register_read(rt2x00dev, RF_CONTROL2);
@@ -42,18 +53,18 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+
+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, 0x4);
+ for (i = 0; i < 100; i = i + 1) {
-+ udelay(50);
++ usleep_range(50, 100);
+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1);
-+ if((rfvalue & 0x04) != 0x4)
++ if ((rfvalue & 0x04) != 0x4)
+ break;
+ }
+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, rfb5r1_org);
+
+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, 0x4);
+ for (i = 0; i < 100; i = i + 1) {
-+ udelay(50);
++ usleep_range(50, 100);
+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 1);
-+ if((rfvalue & 0x04) != 0x4)
++ if ((rfvalue & 0x04) != 0x4)
+ break;
+ }
+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, rfb7r1_org);
@@ -64,14 +75,12 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rt2800_register_write(rt2x00dev, RF_BYPASS0, mac051c);
+ rt2800_register_write(rt2x00dev, RF_CONTROL2, mac0528);
+ rt2800_register_write(rt2x00dev, RF_BYPASS2, mac052c);
-+
-+ rt2x00_info(rt2x00dev, "RF Tx self calibration end\n");
+}
+
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
bool set_bw, bool is_ht40)
{
-@@ -9045,6 +9095,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9043,6 +9090,7 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
diff --git a/package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch b/package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch
index 04ea802117..569b1083e5 100644
--- a/package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch
+++ b/package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch
@@ -1,9 +1,21 @@
-From: =?UTF-8?q?Tomislav=20Po=C5=BEega?= <pozega.tomislav at gmail.com>
+From b75efecd6473e6a044d214571c17cad8ae88ed42 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
Date: Mon, 8 Jan 2018 13:42:58 +0100
-Subject: [PATCH] rt2x00: add r calibration
+Subject: [PATCH 05/16] rt2x00: add r calibration for MT7620
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
+
+From: Tomislav Požega <pozega.tomislav at gmail.com>
Add r calibration code as found in mtk driver.
@@ -14,15 +26,15 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8488,6 +8488,155 @@ static void rt2800_rf_self_txdc_cal(stru
- rt2x00_info(rt2x00dev, "RF Tx self calibration end\n");
+@@ -8483,6 +8483,155 @@ static void rt2800_rf_self_txdc_cal(stru
+ rt2800_register_write(rt2x00dev, RF_BYPASS2, mac052c);
}
+static int rt2800_calcrcalibrationcode(struct rt2x00_dev *rt2x00dev, int d1, int d2)
+{
-+ int calcode;
-+ calcode = ((d2 - d1) * 1000) / 43;
-+ if ((calcode%10) >= 5)
++ int calcode = ((d2 - d1) * 1000) / 43;
++
++ if ((calcode % 10) >= 5)
+ calcode += 10;
+ calcode = (calcode / 10);
+
@@ -70,7 +82,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ for (i = 0; i < 10000; i++) {
+ macstatus = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
+ if (macstatus & 0x1)
-+ udelay(50);
++ usleep_range(50, 100);
+ else
+ break;
+ }
@@ -85,7 +97,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ for (i = 0; i < 10000; i++) {
+ macstatus = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
+ if (macstatus & 0x2)
-+ udelay(50);
++ usleep_range(50, 100);
+ else
+ break;
+ }
@@ -112,7 +124,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+
+ rt2800_bbp_write(rt2x00dev, 47, 0x04);
+ rt2800_bbp_write(rt2x00dev, 22, 0x80);
-+ udelay(100);
++ usleep_range(100, 200);
+ bytevalue = rt2800_bbp_read(rt2x00dev, 49);
+ if (bytevalue > 128)
+ d1 = bytevalue - 256;
@@ -122,7 +134,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x01);
+
+ rt2800_bbp_write(rt2x00dev, 22, 0x80);
-+ udelay(100);
++ usleep_range(100, 200);
+ bytevalue = rt2800_bbp_read(rt2x00dev, 49);
+ if (bytevalue > 128)
+ d2 = bytevalue - 256;
@@ -170,7 +182,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
bool set_bw, bool is_ht40)
{
-@@ -9095,6 +9244,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9090,6 +9239,7 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
diff --git a/package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-RXDCOC-calibration.patch b/package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-RXDCOC-calibration.patch
index 821af87ec1..fa732c97a6 100644
--- a/package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-RXDCOC-calibration.patch
+++ b/package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-RXDCOC-calibration.patch
@@ -1,12 +1,26 @@
-From: =?UTF-8?q?Tomislav=20Po=C5=BEega?= <pozega.tomislav at gmail.com>
+From 865823b63f608ac024d326a465ba8fc1a28868cd Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
Date: Mon, 8 Jan 2018 13:43:37 +0100
-Subject: [PATCH] rt2x00: add RXDCOC calibration
+Subject: [PATCH 06/16] rt2x00: add RXDCOC calibration for MT7620
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
+
+From: Tomislav Požega <pozega.tomislav at gmail.com>
Add RXDCOC calibration code from mtk driver.
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+[fixed typo reported by Serge Vasilugin <vasilugin at yandex.ru>]
Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
---
.../net/wireless/ralink/rt2x00/rt2800lib.c | 65 +++++++++++++++++++
@@ -14,7 +28,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8637,6 +8637,70 @@ static void rt2800_r_calibration(struct
+@@ -8632,6 +8632,70 @@ static void rt2800_r_calibration(struct
rt2800_register_write(rt2x00dev, PWR_PIN_CFG, MAC_PWR_PIN_CFG);
}
@@ -41,12 +55,12 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ for (i = 0; i < 10000; i++) {
+ macvalue1 = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
+ if (macvalue1 & 0x1)
-+ udelay(50);
++ usleep_range(50, 100);
+ else
+ break;
+ }
+
-+ saverfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 0);
++ saverfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4);
+ saverfb7r4 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 4);
+ saverfb5r4 = saverfb5r4 & (~0x40);
+ saverfb7r4 = saverfb7r4 & (~0x40);
@@ -63,9 +77,9 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+
+ for (i = 0; i < 10000; i++) {
+ bbpreg = rt2800_bbp_read(rt2x00dev, 159);
-+ if ((bbpreg & 0x40)==0)
++ if ((bbpreg & 0x40) == 0)
+ break;
-+ udelay(50);
++ usleep_range(50, 100);
+ }
+
+ bbpreg = rt2800_bbp_read(rt2x00dev, 159);
@@ -85,7 +99,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
bool set_bw, bool is_ht40)
{
-@@ -9246,6 +9310,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9241,6 +9305,7 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_r_calibration(rt2x00dev);
rt2800_rf_self_txdc_cal(rt2x00dev);
diff --git a/package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-RXIQ-calibration.patch b/package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-RXIQ-calibration.patch
index 1c07cc7520..59dbd1f506 100644
--- a/package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-RXIQ-calibration.patch
+++ b/package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-RXIQ-calibration.patch
@@ -1,32 +1,46 @@
-From: =?UTF-8?q?Tomislav=20Po=C5=BEega?= <pozega.tomislav at gmail.com>
+From 38b78ba60f6759968b19fe183a344a8612fef694 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
Date: Mon, 8 Jan 2018 13:43:56 +0100
-Subject: [PATCH] rt2x00: add RXIQ calibration
+Subject: [PATCH 07/16] rt2x00: add RXIQ calibration for MT7620
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
+
+From: Tomislav Požega <pozega.tomislav at gmail.com>
Add RXIQ calibration found in mtk driver. With old openwrt builds this
gets us ~8Mbps more of RX bandwidth (test with iPA/eLNA layout).
Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
---
- .../net/wireless/ralink/rt2x00/rt2800lib.c | 379 ++++++++++++++++++
- 1 file changed, 379 insertions(+)
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 384 ++++++++++++++++++
+ 1 file changed, 384 insertions(+)
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8701,6 +8701,384 @@ static void rt2800_rxdcoc_calibration(st
+@@ -8696,6 +8696,389 @@ static void rt2800_rxdcoc_calibration(st
rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, saverfb0r2);
}
-+static u32 rt2800_do_sqrt_accumulation(u32 si) {
++static u32 rt2800_do_sqrt_accumulation(u32 si)
++{
+ u32 root, root_pre, bit;
+ char i;
++
+ bit = 1 << 15;
+ root = 0;
+ for (i = 15; i >= 0; i = i - 1) {
+ root_pre = root + bit;
-+ if ((root_pre*root_pre) <= si)
++ if ((root_pre * root_pre) <= si)
+ root = root_pre;
+ bit = bit >> 1;
+ }
@@ -34,7 +48,8 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ return root;
+}
+
-+static void rt2800_rxiq_calibration(struct rt2x00_dev *rt2x00dev) {
++static void rt2800_rxiq_calibration(struct rt2x00_dev *rt2x00dev)
++{
+ u8 rfb0r1, rfb0r2, rfb0r42;
+ u8 rfb4r0, rfb4r19;
+ u8 rfb5r3, rfb5r4, rfb5r17, rfb5r18, rfb5r19, rfb5r20;
@@ -77,7 +92,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ for (i = 0; i < 10000; i++) {
+ macstatus = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
+ if (macstatus & 0x3)
-+ udelay(50);
++ usleep_range(50, 100);
+ else
+ break;
+ }
@@ -180,7 +195,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001006);
+ udelay(1);
+
-+ bbpval = bbp1 & (~ 0x18);
++ bbpval = bbp1 & (~0x18);
+ bbpval = bbpval | 0x00;
+ rt2800_bbp_write(rt2x00dev, 1, bbpval);
+
@@ -199,13 +214,13 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002006);
+ udelay(1);
+
-+ bbpval = bbp1 & (~ 0x18);
++ bbpval = bbp1 & (~0x18);
+ bbpval = bbpval | 0x08;
+ rt2800_bbp_write(rt2x00dev, 1, bbpval);
+
+ rt2800_bbp_dcoc_write(rt2x00dev, 1, 0x01);
+ }
-+ udelay(500);
++ usleep_range(500, 1500);
+
+ vga_idx = 0;
+ while (vga_idx < 11) {
@@ -217,7 +232,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ for (i = 0; i < 10000; i++) {
+ bbpval = rt2800_bbp_read(rt2x00dev, 159);
+ if ((bbpval & 0xff) == 0x93)
-+ udelay(50);
++ usleep_range(50, 100);
+ else
+ break;
+ }
@@ -247,7 +262,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ value = rt2800_bbp_read(rt2x00dev, 159);
+ bbptemp = bbptemp + value;
+
-+ if ((i < 2) && (bbptemp & 0x800000))
++ if (i < 2 && (bbptemp & 0x800000))
+ result = (bbptemp & 0xffffff) - 0x1000000;
+ else if (i == 4)
+ result = bbptemp;
@@ -255,21 +270,23 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ result = bbptemp;
+
+ if (i == 0)
-+ mi = result/4096;
++ mi = result / 4096;
+ else if (i == 1)
-+ mq = result/4096;
++ mq = result / 4096;
+ else if (i == 2)
-+ si = bbptemp/4096;
++ si = bbptemp / 4096;
+ else if (i == 3)
-+ sq = bbptemp/4096;
++ sq = bbptemp / 4096;
+ else
-+ riq = result/4096;
++ riq = result / 4096;
+ }
+
-+ bbpval1 = si - mi*mi;
-+ rt2x00_dbg(rt2x00dev, "RXIQ si=%d, sq=%d, riq=%d, bbpval %d, vga_idx %d", si, sq, riq, bbpval1, vga_idx);
++ bbpval1 = si - mi * mi;
++ rt2x00_dbg(rt2x00dev,
++ "RXIQ si=%d, sq=%d, riq=%d, bbpval %d, vga_idx %d",
++ si, sq, riq, bbpval1, vga_idx);
+
-+ if (bbpval1 >= (100*100))
++ if (bbpval1 >= (100 * 100))
+ break;
+
+ if (bbpval1 <= 100)
@@ -292,39 +309,39 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ vga_idx = vga_idx + 1;
+ }
+
-+ sigma_i = rt2800_do_sqrt_accumulation(100*(si - mi*mi));
-+ sigma_q = rt2800_do_sqrt_accumulation(100*(sq - mq*mq));
-+ r_iq = 10*(riq-(mi*mq));
++ sigma_i = rt2800_do_sqrt_accumulation(100 * (si - mi * mi));
++ sigma_q = rt2800_do_sqrt_accumulation(100 * (sq - mq * mq));
++ r_iq = 10 * (riq - (mi * mq));
+
+ rt2x00_dbg(rt2x00dev, "Sigma_i=%d, Sigma_q=%d, R_iq=%d", sigma_i, sigma_q, r_iq);
+
-+ if (((sigma_i <= 1400 ) && (sigma_i >= 1000))
-+ && ((sigma_i - sigma_q) <= 112)
-+ && ((sigma_i - sigma_q) >= -112)
-+ && ((mi <= 32) && (mi >= -32))
-+ && ((mq <= 32) && (mq >= -32))) {
-+ r_iq = 10*(riq-(mi*mq));
-+ rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n", sigma_i, sigma_q, r_iq);
-+
-+ g_rx = (1000 * sigma_q) / sigma_i;
-+ g_imb = ((-2) * 128 * (1000 - g_rx)) / (1000 + g_rx);
-+ ph_rx = (r_iq * 2292) / (sigma_i * sigma_q);
-+ rt2x00_info(rt2x00dev, "RXIQ G_imb=%d, Ph_rx=%d\n", g_imb, ph_rx);
-+
-+ if ((ph_rx > 20) || (ph_rx < -20)) {
-+ ph_rx = 0;
-+ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
-+ }
++ if (sigma_i <= 1400 && sigma_i >= 1000 &&
++ (sigma_i - sigma_q) <= 112 &&
++ (sigma_i - sigma_q) >= -112 &&
++ mi <= 32 && mi >= -32 &&
++ mq <= 32 && mq >= -32) {
++ r_iq = 10 * (riq - (mi * mq));
++ rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n",
++ sigma_i, sigma_q, r_iq);
++
++ g_rx = (1000 * sigma_q) / sigma_i;
++ g_imb = ((-2) * 128 * (1000 - g_rx)) / (1000 + g_rx);
++ ph_rx = (r_iq * 2292) / (sigma_i * sigma_q);
++
++ if (ph_rx > 20 || ph_rx < -20) {
++ ph_rx = 0;
++ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
++ }
+
-+ if ((g_imb > 12) || (g_imb < -12)) {
-+ g_imb = 0;
-+ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
-+ }
++ if (g_imb > 12 || g_imb < -12) {
++ g_imb = 0;
++ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
+ }
-+ else {
++ } else {
+ g_imb = 0;
+ ph_rx = 0;
-+ rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n", sigma_i, sigma_q, r_iq);
++ rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n",
++ sigma_i, sigma_q, r_iq);
+ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
+ }
+
@@ -400,7 +417,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
bool set_bw, bool is_ht40)
{
-@@ -9313,6 +9691,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9308,6 +9691,7 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rxdcoc_calibration(rt2x00dev);
rt2800_bw_filter_calibration(rt2x00dev, true);
rt2800_bw_filter_calibration(rt2x00dev, false);
diff --git a/package/kernel/mac80211/patches/rt2x00/986-rt2x00-don-t-run-Rt5592-IQ-calibration-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/986-rt2x00-don-t-run-Rt5592-IQ-calibration-on-MT7620.patch
new file mode 100644
index 0000000000..0fdbaae6a4
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/986-rt2x00-don-t-run-Rt5592-IQ-calibration-on-MT7620.patch
@@ -0,0 +1,35 @@
+From 5f921753b95927c964a5061b5b64c310b968ff3e Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Fri, 16 Sep 2022 20:43:14 +0100
+Subject: [PATCH 08/16] rt2x00: don't run Rt5592 IQ calibration on MT7620
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
+
+The function rt2800_iq_calibrate is intended for Rt5592 only.
+Don't call it for MT7620 which has it's own calibration functions.
+
+Reported-by: Serge Vasilugin <vasilugin at yandex.ru>
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -4366,7 +4366,8 @@ static void rt2800_config_channel(struct
+ reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2*rt2x00dev->lna_gain;
+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
+
+- rt2800_iq_calibrate(rt2x00dev, rf->channel);
++ if (!rt2x00_rt(rt2x00dev, RT6352))
++ rt2800_iq_calibrate(rt2x00dev, rf->channel);
+ }
+
+ if (rt2x00_rt(rt2x00dev, RT6352)) {
diff --git a/package/kernel/mac80211/patches/rt2x00/986-rt2x00-add-TX-LOFT-calibration.patch b/package/kernel/mac80211/patches/rt2x00/987-rt2x00-add-TX-LOFT-calibration.patch
similarity index 89%
rename from package/kernel/mac80211/patches/rt2x00/986-rt2x00-add-TX-LOFT-calibration.patch
rename to package/kernel/mac80211/patches/rt2x00/987-rt2x00-add-TX-LOFT-calibration.patch
index a816aaf52a..4ce532be84 100644
--- a/package/kernel/mac80211/patches/rt2x00/986-rt2x00-add-TX-LOFT-calibration.patch
+++ b/package/kernel/mac80211/patches/rt2x00/987-rt2x00-add-TX-LOFT-calibration.patch
@@ -1,25 +1,38 @@
-From: =?UTF-8?q?Tomislav=20Po=C5=BEega?= <pozega.tomislav at gmail.com>
+From e02adea15f762d2add77b2b7714706f5c3c2f9c9 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
Date: Thu, 11 Jan 2018 19:53:49 +0100
-Subject: [PATCH] rt2x00: add TX LOFT calibration
+Subject: [PATCH 09/16] rt2x00: add TX LOFT calibration for MT7620
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
+
+From: Tomislav Požega <pozega.tomislav at gmail.com>
Add TX LOFT calibration from mtk driver.
Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
---
- .../net/wireless/ralink/rt2x00/rt2800lib.c | 938 ++++++++++++++++++
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 922 ++++++++++++++++++
.../net/wireless/ralink/rt2x00/rt2800lib.h | 10 +
- 2 files changed, 948 insertions(+)
+ 2 files changed, 932 insertions(+)
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9079,6 +9079,943 @@ restore_value:
+@@ -9080,6 +9080,927 @@ restore_value:
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl);
}
-+static void rt2800_rf_configstore(struct rt2x00_dev *rt2x00dev, rf_reg_pair rf_reg_record[][13], u8 chain)
++static void rt2800_rf_configstore(struct rt2x00_dev *rt2x00dev,
++ struct rf_reg_pair rf_reg_record[][13], u8 chain)
+{
+ u8 rfvalue = 0;
+
@@ -131,13 +144,11 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rf_reg_record[CHAIN_1][12].value = rfvalue;
+ } else {
+ rt2x00_warn(rt2x00dev, "Unknown chain = %u\n", chain);
-+ return;
+ }
-+
-+ return;
+}
+
-+static void rt2800_rf_configrecover(struct rt2x00_dev *rt2x00dev, rf_reg_pair rf_record[][13])
++static void rt2800_rf_configrecover(struct rt2x00_dev *rt2x00dev,
++ struct rf_reg_pair rf_record[][13])
+{
+ u8 chain_index = 0, record_index = 0;
+ u8 bank = 0, rf_register = 0, value = 0;
@@ -148,11 +159,10 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rf_register = rf_record[chain_index][record_index].reg;
+ value = rf_record[chain_index][record_index].value;
+ rt2800_rfcsr_write_bank(rt2x00dev, bank, rf_register, value);
-+ rt2x00_dbg(rt2x00dev, "bank: %d, rf_register: %d, value: %x\n", bank, rf_register, value);
++ rt2x00_dbg(rt2x00dev, "bank: %d, rf_register: %d, value: %x\n",
++ bank, rf_register, value);
+ }
+ }
-+
-+ return;
+}
+
+static void rt2800_setbbptonegenerator(struct rt2x00_dev *rt2x00dev)
@@ -170,15 +180,13 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rt2800_bbp_write(rt2x00dev, 159, 0x3F);
+
+ rt2800_bbp_write(rt2x00dev, 244, 0x40);
-+
-+ return;
+}
+
+static u32 rt2800_do_fft_accumulation(struct rt2x00_dev *rt2x00dev, u8 tidx, u8 read_neg)
+{
+ u32 macvalue = 0;
+ int fftout_i = 0, fftout_q = 0;
-+ u32 ptmp=0, pint = 0;
++ u32 ptmp = 0, pint = 0;
+ u8 bbp = 0;
+ u8 tidxi;
+
@@ -188,7 +196,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ bbp = 0x9b;
+
+ while (bbp == 0x9b) {
-+ udelay(10);
++ usleep_range(10, 50);
+ bbp = rt2800_bbp_read(rt2x00dev, 159);
+ bbp = bbp & 0xff;
+ }
@@ -233,10 +241,11 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ return pint;
+}
+
-+static u32 rt2800_read_fft_accumulation(struct rt2x00_dev *rt2x00dev, u8 tidx) {
++static u32 rt2800_read_fft_accumulation(struct rt2x00_dev *rt2x00dev, u8 tidx)
++{
+ u32 macvalue = 0;
+ int fftout_i = 0, fftout_q = 0;
-+ u32 ptmp=0, pint = 0;
++ u32 ptmp = 0, pint = 0;
+
+ rt2800_bbp_write(rt2x00dev, 158, 0xBA);
+ rt2800_bbp_write(rt2x00dev, 159, tidx);
@@ -252,7 +261,6 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ ptmp = (fftout_i * fftout_i);
+ ptmp = ptmp + (fftout_q * fftout_q);
+ pint = ptmp;
-+ rt2x00_info(rt2x00dev, "I = %d, Q = %d, power = %x\n", fftout_i, fftout_q, pint);
+
+ return pint;
+}
@@ -266,18 +274,17 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rt2800_bbp_write(rt2x00dev, 159, bbp);
+
+ if (ch_idx == 0)
-+ bbp = (iorq == 0) ? 0xb1: 0xb2;
++ bbp = (iorq == 0) ? 0xb1 : 0xb2;
+ else
-+ bbp = (iorq == 0) ? 0xb8: 0xb9;
++ bbp = (iorq == 0) ? 0xb8 : 0xb9;
+
+ rt2800_bbp_write(rt2x00dev, 158, bbp);
+ bbp = dc;
+ rt2800_bbp_write(rt2x00dev, 159, bbp);
-+
-+ return;
+}
+
-+static void rt2800_loft_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx, u8 alc_idx, u8 dc_result[][RF_ALC_NUM][2])
++static void rt2800_loft_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx,
++ u8 alc_idx, u8 dc_result[][RF_ALC_NUM][2])
+{
+ u32 p0 = 0, p1 = 0, pf = 0;
+ char idx0 = 0, idx1 = 0;
@@ -303,16 +310,17 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0);
+ }
+
-+ idx1 = idxf[iorq] + ((bidx == 5) ? 0 : ibit);
++ idx1 = idxf[iorq] + (bidx == 5 ? 0 : ibit);
+ idx1 = idx1 & 0x3F;
+ rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idx1);
+ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0);
+
-+ rt2x00_dbg(rt2x00dev, "alc=%u, IorQ=%u, idx_final=%2x\n", alc_idx, iorq, idxf[iorq]);
-+ rt2x00_dbg(rt2x00dev, "p0=%x, p1=%x, pf=%x, idx_0=%x, idx_1=%x, ibit=%x !\n", p0, p1, pf, idx0, idx1, ibit);
++ rt2x00_dbg(rt2x00dev, "alc=%u, IorQ=%u, idx_final=%2x\n",
++ alc_idx, iorq, idxf[iorq]);
++ rt2x00_dbg(rt2x00dev, "p0=%x, p1=%x, pf=%x, idx_0=%x, idx_1=%x, ibit=%x\n",
++ p0, p1, pf, idx0, idx1, ibit);
+
-+ if ((bidx != 5) && (pf <= p0) && (pf < p1)) {
-+ pf = pf;
++ if (bidx != 5 && pf <= p0 && pf < p1) {
+ idxf[iorq] = idxf[iorq];
+ } else if (p0 < p1) {
+ pf = p0;
@@ -321,17 +329,15 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ pf = p1;
+ idxf[iorq] = idx1 & 0x3F;
+ }
-+ rt2x00_dbg(rt2x00dev, "IorQ=%u, idx_final[%u]:%x, pf:%8x\n", iorq, iorq, idxf[iorq], pf);
++ rt2x00_dbg(rt2x00dev, "IorQ=%u, idx_final[%u]:%x, pf:%8x\n",
++ iorq, iorq, idxf[iorq], pf);
+
+ rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idxf[iorq]);
-+
+ }
+ ibit = ibit >> 1;
+ }
+ dc_result[ch_idx][alc_idx][0] = idxf[0];
+ dc_result[ch_idx][alc_idx][1] = idxf[1];
-+
-+ return;
+}
+
+static void rt2800_iq_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx, u8 *ges, u8 *pes)
@@ -349,26 +355,27 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ u8 bbp = 0;
+ char bidx;
+
-+ rt2x00_info(rt2x00dev, "IQCalibration Start!\n");
+ for (bidx = 5; bidx >= 1; bidx--) {
+ for (gop = 0; gop < 2; gop++) {
-+ rt2x00_dbg(rt2x00dev, "\n========================================================\n");
++ rt2x00_dbg(rt2x00dev, "\n==============================================\n");
+
-+ if ((gop == 1) || (bidx < 4)) {
++ if (gop == 1 || bidx < 4) {
+ if (gop == 0)
+ iq_err = gerr;
+ else
+ iq_err = perr;
+
+ first_search = (gop == 0) ? (bidx == 3) : (bidx == 5);
-+ touch_neg_max = (gop) ? ((iq_err & 0x0F) == 0x08) : ((iq_err & 0x3F) == 0x20);
++ touch_neg_max = (gop) ? ((iq_err & 0x0F) == 0x08) :
++ ((iq_err & 0x3F) == 0x20);
+
+ if (touch_neg_max) {
+ p0 = pf;
+ idx0 = iq_err;
+ } else {
+ idx0 = iq_err - ibit;
-+ bbp = (ch_idx == 0) ? ((gop == 0) ? 0x28 : 0x29): ((gop == 0) ? 0x46 : 0x47);
++ bbp = (ch_idx == 0) ? ((gop == 0) ? 0x28 : 0x29) :
++ ((gop == 0) ? 0x46 : 0x47);
+
+ rt2800_bbp_write(rt2x00dev, 158, bbp);
+ rt2800_bbp_write(rt2x00dev, 159, idx0);
@@ -379,26 +386,30 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ idx1 = iq_err + (first_search ? 0 : ibit);
+ idx1 = (gop == 0) ? (idx1 & 0x0F) : (idx1 & 0x3F);
+
-+ bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 : (gop == 0) ? 0x46 : 0x47;
++ bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 :
++ (gop == 0) ? 0x46 : 0x47;
+
+ rt2800_bbp_write(rt2x00dev, 158, bbp);
+ rt2800_bbp_write(rt2x00dev, 159, idx1);
+
+ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1);
+
-+ rt2x00_dbg(rt2x00dev, "p0=%x, p1=%x, pwer_final=%x, idx0=%x, idx1=%x, iq_err=%x, gop=%d, ibit=%x !\n", p0, p1, pf, idx0, idx1, iq_err, gop, ibit);
-+
-+ if ((!first_search) && (pf <= p0) && (pf < p1)) {
-+ pf = pf;
-+ } else if (p0 < p1) {
-+ pf = p0;
-+ iq_err = idx0;
-+ } else {
-+ pf = p1;
-+ iq_err = idx1;
++ rt2x00_dbg(rt2x00dev,
++ "p0=%x, p1=%x, pwer_final=%x, idx0=%x, idx1=%x, iq_err=%x, gop=%d, ibit=%x\n",
++ p0, p1, pf, idx0, idx1, iq_err, gop, ibit);
++
++ if (!(!first_search && pf <= p0 && pf < p1)) {
++ if (p0 < p1) {
++ pf = p0;
++ iq_err = idx0;
++ } else {
++ pf = p1;
++ iq_err = idx1;
++ }
+ }
+
-+ bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 : (gop == 0) ? 0x46 : 0x47;
++ bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 :
++ (gop == 0) ? 0x46 : 0x47;
+
+ rt2800_bbp_write(rt2x00dev, 158, bbp);
+ rt2800_bbp_write(rt2x00dev, 159, iq_err);
@@ -408,8 +419,8 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ else
+ perr = iq_err;
+
-+ rt2x00_dbg(rt2x00dev, "IQCalibration pf=%8x (%2x, %2x) !\n", pf, gerr & 0x0F, perr & 0x3F);
-+
++ rt2x00_dbg(rt2x00dev, "IQCalibration pf=%8x (%2x, %2x) !\n",
++ pf, gerr & 0x0F, perr & 0x3F);
+ }
+ }
+
@@ -438,25 +449,21 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rt2800_bbp_write(rt2x00dev, 159, pef & 0x3F);
+
+ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1);
-+ if ((gef == gsta) && (pef == psta)) {
++ if (gef == gsta && pef == psta) {
+ pf = p1;
+ gerr = gef;
+ perr = pef;
-+ }
-+ else if (pf > p1){
++ } else if (pf > p1) {
+ pf = p1;
+ gerr = gef;
+ perr = pef;
+ }
-+ rt2x00_dbg(rt2x00dev, "Fine IQCalibration p1=%8x pf=%8x (%2x, %2x) !\n", p1, pf, gef & 0x0F, pef & 0x3F);
++ rt2x00_dbg(rt2x00dev, "Fine IQCalibration p1=%8x pf=%8x (%2x, %2x) !\n",
++ p1, pf, gef & 0x0F, pef & 0x3F);
+ }
+
+ ges[ch_idx] = gerr & 0x0F;
+ pes[ch_idx] = perr & 0x3F;
-+
-+ rt2x00_info(rt2x00dev, "IQCalibration Done! CH = %u, (gain=%2x, phase=%2x)\n", ch_idx, gerr & 0x0F, perr & 0x3F);
-+
-+ return;
+}
+
+static void rt2800_rf_aux_tx0_loopback(struct rt2x00_dev *rt2x00dev)
@@ -495,7 +502,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+
+void rt2800_loft_iq_calibration(struct rt2x00_dev *rt2x00dev)
+{
-+ rf_reg_pair rf_store[CHAIN_NUM][13];
++ struct rf_reg_pair rf_store[CHAIN_NUM][13];
+ u32 macorg1 = 0;
+ u32 macorg2 = 0;
+ u32 macorg3 = 0;
@@ -514,8 +521,8 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ u8 loft_dc_search_result[CHAIN_NUM][RF_ALC_NUM][2];
+ u8 ger[CHAIN_NUM], per[CHAIN_NUM];
+ u8 rf_gain[] = {0x00, 0x01, 0x02, 0x04, 0x08, 0x0c};
-+ u8 rfvga_gain_table[] = {0x24, 0x25, 0x26, 0x27, 0x28, 0x2c, 0x2d, 0x2e, 0x2f, 0x30, 0x31, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3F};
-+
++ u8 rfvga_gain_table[] = {0x24, 0x25, 0x26, 0x27, 0x28, 0x2c, 0x2d, 0x2e, 0x2f, 0x30,
++ 0x31, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3F};
+ u8 vga_gain[] = {14, 14};
+ u8 bbp_2324gain[] = {0x16, 0x14, 0x12, 0x10, 0x0c, 0x08};
+ u8 bbp = 0, ch_idx = 0, rf_alc_idx = 0, idx = 0;
@@ -542,7 +549,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ for (mtxcycle = 0; mtxcycle < 10000; mtxcycle++) {
+ macvalue = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
+ if (macvalue & 0x01)
-+ udelay(50);
++ usleep_range(50, 100);
+ else
+ break;
+ }
@@ -554,14 +561,13 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ for (mtxcycle = 0; mtxcycle < 10000; mtxcycle++) {
+ macvalue = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
+ if (macvalue & 0x02)
-+ udelay(50);
++ usleep_range(50, 100);
+ else
+ break;
+ }
+
-+ for (ch_idx = 0; ch_idx < 2; ch_idx++) {
++ for (ch_idx = 0; ch_idx < 2; ch_idx++)
+ rt2800_rf_configstore(rt2x00dev, rf_store, ch_idx);
-+ }
+
+ bbpr30 = rt2800_bbp_read(rt2x00dev, 30);
+ rfb0r39 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 39);
@@ -576,7 +582,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+
+ rt2800_setbbptonegenerator(rt2x00dev);
+
-+ for (ch_idx = 0; ch_idx < 2; ch_idx ++) {
++ for (ch_idx = 0; ch_idx < 2; ch_idx++) {
+ rt2800_bbp_write(rt2x00dev, 23, 0x00);
+ rt2800_bbp_write(rt2x00dev, 24, 0x00);
+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00);
@@ -586,18 +592,17 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rt2800_register_write(rt2x00dev, 0x13b8, 0x10);
+ udelay(1);
+
-+ if (ch_idx == 0) {
++ if (ch_idx == 0)
+ rt2800_rf_aux_tx0_loopback(rt2x00dev);
-+ } else {
++ else
+ rt2800_rf_aux_tx1_loopback(rt2x00dev);
-+ }
++
+ udelay(1);
+
-+ if (ch_idx == 0) {
++ if (ch_idx == 0)
+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001004);
-+ } else {
++ else
+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002004);
-+ }
+
+ rt2800_bbp_write(rt2x00dev, 158, 0x05);
+ rt2800_bbp_write(rt2x00dev, 159, 0x00);
@@ -623,7 +628,8 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+
+ if (rf_alc_idx == 0) {
+ rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x21);
-+ for (;vga_gain[ch_idx] > 0;vga_gain[ch_idx] = vga_gain[ch_idx] - 2) {
++ for (; vga_gain[ch_idx] > 0;
++ vga_gain[ch_idx] = vga_gain[ch_idx] - 2) {
+ rfvalue = rfvga_gain_table[vga_gain[ch_idx]];
+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue);
+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue);
@@ -633,15 +639,15 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x21);
+ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0);
+ rt2x00_dbg(rt2x00dev, "LOFT AGC %d %d\n", p0, p1);
-+ if ((p0 < 7000*7000) && (p1 < (7000*7000))) {
++ if ((p0 < 7000 * 7000) && (p1 < (7000 * 7000)))
+ break;
-+ }
+ }
+
+ rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x00);
+ rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x00);
+
-+ rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n",vga_gain[ch_idx], rfvga_gain_table[vga_gain[ch_idx]]);
++ rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n", vga_gain[ch_idx],
++ rfvga_gain_table[vga_gain[ch_idx]]);
+
+ if (vga_gain[ch_idx] < 0)
+ vga_gain[ch_idx] = 0;
@@ -659,7 +665,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ for (rf_alc_idx = 0; rf_alc_idx < 3; rf_alc_idx++) {
+ for (idx = 0; idx < 4; idx++) {
+ rt2800_bbp_write(rt2x00dev, 158, 0xB0);
-+ bbp = (idx<<2) + rf_alc_idx;
++ bbp = (idx << 2) + rf_alc_idx;
+ rt2800_bbp_write(rt2x00dev, 159, bbp);
+ rt2x00_dbg(rt2x00dev, " ALC %2x,", bbp);
+
@@ -720,8 +726,6 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rt2800_register_write(rt2x00dev, RF_BYPASS2, orig52c);
+ rt2800_register_write(rt2x00dev, 0x13b8, mac13b8);
+
-+ rt2x00_info(rt2x00dev, "LOFT Calibration Done!\n");
-+
+ savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
+ macorg1 = rt2800_register_read(rt2x00dev, TX_PIN_CFG);
+ macorg2 = rt2800_register_read(rt2x00dev, RF_CONTROL0);
@@ -741,7 +745,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ for (mtxcycle = 0; mtxcycle < 10000; mtxcycle++) {
+ macvalue = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
+ if (macvalue & 0x01)
-+ udelay(50);
++ usleep_range(50, 100);
+ else
+ break;
+ }
@@ -752,7 +756,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ for (mtxcycle = 0; mtxcycle < 10000; mtxcycle++) {
+ macvalue = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
+ if (macvalue & 0x02)
-+ udelay(50);
++ usleep_range(50, 100);
+ else
+ break;
+ }
@@ -791,9 +795,8 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+
+ rt2800_register_write(rt2x00dev, 0x13b8, 0x00000010);
+
-+ for (ch_idx = 0; ch_idx < 2; ch_idx++) {
++ for (ch_idx = 0; ch_idx < 2; ch_idx++)
+ rt2800_rf_configstore(rt2x00dev, rf_store, ch_idx);
-+ }
+
+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x3B);
+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x3B);
@@ -803,7 +806,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rt2800_bbp_write(rt2x00dev, 158, 0xB0);
+ rt2800_bbp_write(rt2x00dev, 159, 0x80);
+
-+ for (ch_idx = 0; ch_idx < 2; ch_idx ++) {
++ for (ch_idx = 0; ch_idx < 2; ch_idx++) {
+ rt2800_bbp_write(rt2x00dev, 23, 0x00);
+ rt2800_bbp_write(rt2x00dev, 24, 0x00);
+
@@ -846,7 +849,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ count_step = 2;
+ }
+
-+ for (;vga_gain[ch_idx] < 19; vga_gain[ch_idx]=(vga_gain[ch_idx] + count_step)) {
++ for (; vga_gain[ch_idx] < 19; vga_gain[ch_idx] = (vga_gain[ch_idx] + count_step)) {
+ rfvalue = rfvga_gain_table[vga_gain[ch_idx]];
+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue);
+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue);
@@ -855,37 +858,35 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rt2800_bbp_write(rt2x00dev, 158, bbp);
+ rt2800_bbp_write(rt2x00dev, 159, 0x00);
+ p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 0);
-+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) {
++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags))
+ p0_idx10 = rt2800_read_fft_accumulation(rt2x00dev, 0x0A);
-+ }
+
+ bbp = (ch_idx == 0) ? 0x29 : 0x47;
+ rt2800_bbp_write(rt2x00dev, 158, bbp);
+ rt2800_bbp_write(rt2x00dev, 159, 0x21);
+ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 0);
-+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX1, &rt2x00dev->cap_flags)) {
++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX1, &rt2x00dev->cap_flags))
+ p1_idx10 = rt2800_read_fft_accumulation(rt2x00dev, 0x0A);
-+ }
+
+ rt2x00_dbg(rt2x00dev, "IQ AGC %d %d\n", p0, p1);
+
+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) {
+ rt2x00_dbg(rt2x00dev, "IQ AGC IDX 10 %d %d\n", p0_idx10, p1_idx10);
-+ if ((p0_idx10 > 7000*7000) || (p1_idx10 > 7000*7000)) {
-+ if (vga_gain[ch_idx]!=0)
-+ vga_gain[ch_idx] = vga_gain[ch_idx]-1;
++ if ((p0_idx10 > 7000 * 7000) || (p1_idx10 > 7000 * 7000)) {
++ if (vga_gain[ch_idx] != 0)
++ vga_gain[ch_idx] = vga_gain[ch_idx] - 1;
+ break;
+ }
+ }
+
-+ if ((p0 > 2500*2500) || (p1 > 2500*2500)) {
++ if ((p0 > 2500 * 2500) || (p1 > 2500 * 2500))
+ break;
-+ }
+ }
+
+ if (vga_gain[ch_idx] > 18)
+ vga_gain[ch_idx] = 18;
-+ rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n",vga_gain[ch_idx], rfvga_gain_table[vga_gain[ch_idx]]);
++ rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n", vga_gain[ch_idx],
++ rfvga_gain_table[vga_gain[ch_idx]]);
+
+ bbp = (ch_idx == 0) ? 0x29 : 0x47;
+ rt2800_bbp_write(rt2x00dev, 158, bbp);
@@ -930,9 +931,8 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 39, rfb0r39);
+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfb0r42);
+
-+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) {
++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags))
+ rt2800_bbp_write(rt2x00dev, 4, bbpr4);
-+ }
+
+ rt2800_bbp_write(rt2x00dev, 21, 0x01);
+ udelay(1);
@@ -950,16 +950,12 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+ rt2800_register_write(rt2x00dev, RF_BYPASS3, macorg5);
+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl);
+ rt2800_register_write(rt2x00dev, 0x13b8, mac13b8);
-+
-+ rt2x00_info(rt2x00dev, "TX IQ Calibration Done!\n");
-+
-+ return;
+}
+
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
bool set_bw, bool is_ht40)
{
-@@ -9691,6 +10628,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9692,6 +10613,7 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rxdcoc_calibration(rt2x00dev);
rt2800_bw_filter_calibration(rt2x00dev, true);
rt2800_bw_filter_calibration(rt2x00dev, false);
@@ -978,11 +974,11 @@ Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
+#define RF_ALC_NUM 6
+#define CHAIN_NUM 2
+
-+typedef struct rf_reg_pair {
++struct rf_reg_pair {
+ u8 bank;
+ u8 reg;
+ u8 value;
-+} rf_reg_pair;
++};
/* RT2800 driver data structure */
struct rt2800_drv_data {
diff --git a/package/kernel/mac80211/patches/rt2x00/988-rt2x00-move-helper-functions-up-in-file.patch b/package/kernel/mac80211/patches/rt2x00/988-rt2x00-move-helper-functions-up-in-file.patch
new file mode 100644
index 0000000000..7dc37eb826
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/988-rt2x00-move-helper-functions-up-in-file.patch
@@ -0,0 +1,78 @@
+From f06bc3d756e7bfdaa03f060ae68797321b2e281a Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Fri, 16 Sep 2022 20:22:04 +0100
+Subject: [PATCH 10/16] rt2x00: move helper functions up in file
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
+
+Move register access helper functions up to the head of the file so
+they can be used in all functions.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+---
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 40 +++++++++----------
+ 1 file changed, 20 insertions(+), 20 deletions(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -199,6 +199,26 @@ static void rt2800_rfcsr_write_dccal(str
+ rt2800_rfcsr_write_bank(rt2x00dev, 7, reg, value);
+ }
+
++static void rt2800_bbp_dcoc_write(struct rt2x00_dev *rt2x00dev,
++ const u8 reg, const u8 value)
++{
++ rt2800_bbp_write(rt2x00dev, 158, reg);
++ rt2800_bbp_write(rt2x00dev, 159, value);
++}
++
++static u8 rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev, const u8 reg)
++{
++ rt2800_bbp_write(rt2x00dev, 158, reg);
++ return rt2800_bbp_read(rt2x00dev, 159);
++}
++
++static void rt2800_bbp_glrt_write(struct rt2x00_dev *rt2x00dev,
++ const u8 reg, const u8 value)
++{
++ rt2800_bbp_write(rt2x00dev, 195, reg);
++ rt2800_bbp_write(rt2x00dev, 196, value);
++}
++
+ static u8 rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word)
+ {
+@@ -6955,26 +6975,6 @@ static void rt2800_init_bbp_5592(struct
+ rt2800_bbp_write(rt2x00dev, 103, 0xc0);
+ }
+
+-static void rt2800_bbp_glrt_write(struct rt2x00_dev *rt2x00dev,
+- const u8 reg, const u8 value)
+-{
+- rt2800_bbp_write(rt2x00dev, 195, reg);
+- rt2800_bbp_write(rt2x00dev, 196, value);
+-}
+-
+-static void rt2800_bbp_dcoc_write(struct rt2x00_dev *rt2x00dev,
+- const u8 reg, const u8 value)
+-{
+- rt2800_bbp_write(rt2x00dev, 158, reg);
+- rt2800_bbp_write(rt2x00dev, 159, value);
+-}
+-
+-static u8 rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev, const u8 reg)
+-{
+- rt2800_bbp_write(rt2x00dev, 158, reg);
+- return rt2800_bbp_read(rt2x00dev, 159);
+-}
+-
+ static void rt2800_init_bbp_6352(struct rt2x00_dev *rt2x00dev)
+ {
+ u8 bbp;
diff --git a/package/kernel/mac80211/patches/rt2x00/989-rt2x00-fix-HT20-HT40-bandwidth-switch-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/989-rt2x00-fix-HT20-HT40-bandwidth-switch-on-MT7620.patch
new file mode 100644
index 0000000000..6472bbc6f1
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/989-rt2x00-fix-HT20-HT40-bandwidth-switch-on-MT7620.patch
@@ -0,0 +1,40 @@
+From d20eadcb4eac59c5168f48c33836fba32b8cd1ae Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Fri, 16 Sep 2022 20:26:03 +0100
+Subject: [PATCH 11/16] rt2x00: fix HT20/HT40 bandwidth switch on MT7620
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
+
+Add missing configuration of the channel bandwidth filter to the
+channel setup function for MT7620.
+
+Reported-by: Serge Vasilugin <vasilugin at yandex.ru>
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -3814,6 +3814,14 @@ static void rt2800_config_channel_rf7620
+ rfcsr |= tx_agc_fc;
+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 59, rfcsr);
+ }
++
++ if (conf_is_ht40(conf)) {
++ rt2800_bbp_glrt_write(rt2x00dev, 141, 0x10);
++ rt2800_bbp_glrt_write(rt2x00dev, 157, 0x2f);
++ } else {
++ rt2800_bbp_glrt_write(rt2x00dev, 141, 0x1a);
++ rt2800_bbp_glrt_write(rt2x00dev, 157, 0x40);
++ }
+ }
+
+ static void rt2800_config_alc(struct rt2x00_dev *rt2x00dev,
diff --git a/package/kernel/mac80211/patches/rt2x00/990-rt2x00-set-correct-TX_SW_CFG1-MAC-register-for-MT762.patch b/package/kernel/mac80211/patches/rt2x00/990-rt2x00-set-correct-TX_SW_CFG1-MAC-register-for-MT762.patch
new file mode 100644
index 0000000000..2ab1ccee23
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/990-rt2x00-set-correct-TX_SW_CFG1-MAC-register-for-MT762.patch
@@ -0,0 +1,35 @@
+From fa8914fe29543be586e9bbc00c7209e2808f0a13 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Fri, 16 Sep 2022 20:28:40 +0100
+Subject: [PATCH 12/16] rt2x00: set correct TX_SW_CFG1 MAC register for MT7620
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
+
+Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the
+vendor driver[1].
+
+[1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531
+Reported-by: Serge Vasilugin <vasilugin at yandex.ru>
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -5934,7 +5934,7 @@ static int rt2800_init_registers(struct
+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
+ } else if (rt2x00_rt(rt2x00dev, RT6352)) {
+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
+- rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
++ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0001);
+ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
+ rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000);
+ rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0);
diff --git a/package/kernel/mac80211/patches/rt2x00/991-rt2x00-set-VGC-gain-for-both-chains-of-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/991-rt2x00-set-VGC-gain-for-both-chains-of-MT7620.patch
new file mode 100644
index 0000000000..4d1700b24e
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/991-rt2x00-set-VGC-gain-for-both-chains-of-MT7620.patch
@@ -0,0 +1,34 @@
+From 5b62ef26e5f17c5cdf19c05e32e2c1da9988480d Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Fri, 16 Sep 2022 20:31:15 +0100
+Subject: [PATCH 13/16] rt2x00: set VGC gain for both chains of MT7620
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
+
+Set bbp66 for all chains of the MT7620.
+
+Reported-by: Serge Vasilugin <vasilugin at yandex.ru>
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -5711,7 +5711,8 @@ static inline void rt2800_set_vgc(struct
+ if (qual->vgc_level != vgc_level) {
+ if (rt2x00_rt(rt2x00dev, RT3572) ||
+ rt2x00_rt(rt2x00dev, RT3593) ||
+- rt2x00_rt(rt2x00dev, RT3883)) {
++ rt2x00_rt(rt2x00dev, RT3883) ||
++ rt2x00_rt(rt2x00dev, RT6352)) {
+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66,
+ vgc_level);
+ } else if (rt2x00_rt(rt2x00dev, RT5592)) {
diff --git a/package/kernel/mac80211/patches/rt2x00/992-rt2x00-more-fixes.patch b/package/kernel/mac80211/patches/rt2x00/992-rt2x00-more-fixes.patch
deleted file mode 100644
index 2ad6219014..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/992-rt2x00-more-fixes.patch
+++ /dev/null
@@ -1,423 +0,0 @@
-From: Daniel Golle <daniel at makrotopia.org>
-Date: Mon, 12 Sep 2022 21:33:13 +0100
-Subject: [PATCH] rt2x00: various experimental fixes for MT7620
-
-Serge Vasilugin reports:
-
-To improve mt7620 built-in wifi performance some changes:
-1. Correct BW20/BW40 switching (see comments with mark see commets with mark (1))
-2. Correct TX_SW_CFG1 MAC reg from v3 of vendor driver see
- https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531
-3. Set bbp66 for all chains.
-4. US_CYC_CNT init based on Programming guide, default value was 33 (pci),
- set chipset bus clock with fallback to cpu clock/3.
-5. Don't overwrite default values for mt7620.
-6. Correct some typos.
-7. Add support for external LNA:
- a) RF and BBP regs never be corrected for this mode
- b) eLNA is driven the same way as ePA with mt7620's pin PA
- but vendor driver explicitly pin PA to gpio mode (for forrect calibration?)
- so I'm not sure that request for pa_pin in dts-file will be enough
-
-First 5 changes (really 2) improve performance for boards w/o eLNA/ePA.
-Changes 7 add support for eLNA
-
-Configuration w/o eLAN/ePA and with eLNA show results
-tx/rx (from router point of view) for each stream:
- 35-40/30-35 Mbps for HT20
- 65-70/60-65 Mbps for HT40
-
-Yes. Max results for 2T2R client is 140-145/135-140
-with peaks 160/150, It correspond to mediatek driver results.
-Boards with ePA untested.
-
-Reported-by: Serge Vasilugin <vasilugin at yandex.ru>
-Signed-off-by: Daniel Golle <daniel at makrotopia.org>
----
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -137,6 +137,26 @@ static u8 rt2800_bbp_read(struct rt2x00_
-
- return value;
- }
-+//serge: move here for use in test
-+static void rt2800_bbp_glrt_write(struct rt2x00_dev *rt2x00dev,
-+ const u8 reg, const u8 value)
-+{
-+ rt2800_bbp_write(rt2x00dev, 195, reg);
-+ rt2800_bbp_write(rt2x00dev, 196, value);
-+}
-+
-+static void rt2800_bbp_dcoc_write(struct rt2x00_dev *rt2x00dev,
-+ const u8 reg, const u8 value)
-+{
-+ rt2800_bbp_write(rt2x00dev, 158, reg);
-+ rt2800_bbp_write(rt2x00dev, 159, value);
-+}
-+
-+static u8 rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev, const u8 reg)
-+{
-+ rt2800_bbp_write(rt2x00dev, 158, reg);
-+ return rt2800_bbp_read(rt2x00dev, 159);
-+}
-
- static void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, const u8 value)
-@@ -284,6 +304,28 @@ static void rt2800_rf_write(struct rt2x0
- mutex_unlock(&rt2x00dev->csr_mutex);
- }
-
-+void rt6352_enable_pa_pin(struct rt2x00_dev *rt2x00dev, int enable)
-+{
-+ if (!rt2x00dev->pinctrl)
-+ return;
-+
-+ if (enable) {
-+ if (!rt2x00dev->pins_default) {
-+ rt2x00_warn(rt2x00dev, "cannot enable PA pin! no default pinctrl\n");
-+ return;
-+ }
-+
-+ pinctrl_select_state(rt2x00dev->pinctrl, rt2x00dev->pins_default);
-+ } else {
-+ if (!rt2x00dev->pins_pa_gpio) {
-+ rt2x00_warn(rt2x00dev, "cannot disable PA pin! no pa_gpio pinctrl\n");
-+ return;
-+ }
-+
-+ pinctrl_select_state(rt2x00dev->pinctrl, rt2x00dev->pins_pa_gpio);
-+ }
-+}
-+
- static const unsigned int rt2800_eeprom_map[EEPROM_WORD_COUNT] = {
- [EEPROM_CHIP_ID] = 0x0000,
- [EEPROM_VERSION] = 0x0001,
-@@ -3801,6 +3843,20 @@ static void rt2800_config_channel_rf7620
- rfcsr |= tx_agc_fc;
- rt2800_rfcsr_write_bank(rt2x00dev, 7, 59, rfcsr);
- }
-+
-+ if (conf_is_ht40(conf)) {//serge:skipped this step (1)
-+ rt2800_bbp_write(rt2x00dev, 195, 141);
-+ rt2800_bbp_write(rt2x00dev, 196, 0x10);
-+ rt2800_bbp_write(rt2x00dev, 195, 157);
-+ rt2800_bbp_write(rt2x00dev, 196, 0x2f);
-+ //rt2800_bbp_write(rt2x00dev, 105, 0x3C);
-+ } else {
-+ rt2800_bbp_write(rt2x00dev, 195, 141);
-+ rt2800_bbp_write(rt2x00dev, 196, 0x1a);
-+ rt2800_bbp_write(rt2x00dev, 195, 157);
-+ rt2800_bbp_write(rt2x00dev, 196, 0x40);
-+ //rt2800_bbp_write(rt2x00dev, 105, 0x1C);
-+ }
- }
-
- static void rt2800_config_alc(struct rt2x00_dev *rt2x00dev,
-@@ -4172,6 +4228,11 @@ static void rt2800_config_channel(struct
- rt2800_bbp_write(rt2x00dev, 86, 0x46);
- else
- rt2800_bbp_write(rt2x00dev, 86, 0);
-+ } else if (rt2x00_rt(rt2x00dev, RT6352)) {//serge: don't overwite bbp r86 (5)
-+ rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
-+ rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-+ rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
-+ rt2800_bbp_write(rt2x00dev, 86, 0x38);
- } else {
- rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
- rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-@@ -4377,7 +4438,8 @@ static void rt2800_config_channel(struct
- reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2*rt2x00dev->lna_gain;
- rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
-
-- rt2800_iq_calibrate(rt2x00dev, rf->channel);
-+ if (!rt2x00_rt(rt2x00dev, RT6352))//serge: this function for rt5592 only, for rt6352 it switch off compensations (5)
-+ rt2800_iq_calibrate(rt2x00dev, rf->channel);
- }
-
- if (rt2x00_rt(rt2x00dev, RT6352)) {
-@@ -4417,6 +4479,31 @@ static void rt2800_config_channel(struct
- rt2800_register_write(rt2x00dev, TX1_RF_GAIN_ATTEN,
- 0x6C6C6B6C);
- }
-+
-+ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {//serge: for support eLNA (7a)
-+ rt2x00_warn(rt2x00dev, "Correct RF/BBP for eLNA!\n");
-+ reg = rt2800_register_read(rt2x00dev, RF_CONTROL3);
-+ reg |= 0x00000101;
-+ rt2800_register_write(rt2x00dev, RF_CONTROL3, reg);
-+
-+ reg = rt2800_register_read(rt2x00dev, RF_BYPASS3);
-+ reg |= 0x00000101;
-+ rt2800_register_write(rt2x00dev, RF_BYPASS3, reg);
-+
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x66);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x20);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 18, 0x42);
-+ rt2800_bbp_write(rt2x00dev, 75, 0x68);//serge: move bbp eLNA init here?
-+ rt2800_bbp_write(rt2x00dev, 76, 0x4C);
-+ rt2800_bbp_write(rt2x00dev, 79, 0x1C);
-+ rt2800_bbp_write(rt2x00dev, 80, 0x0C);
-+ rt2800_bbp_write(rt2x00dev, 82, 0xB6);
-+ /* bank 0 RF reg 42 and glrt BBP reg 141
-+ will be set in config channel function
-+ in dependence of channel and HT20/HT40
-+ so don't touch it
-+ */
-+ }
- }
-
- bbp = rt2800_bbp_read(rt2x00dev, 4);
-@@ -4457,6 +4544,9 @@ static void rt2800_config_channel(struct
- rt2x00_set_field8(&bbp, BBP49_UPDATE_FLAG, 0);
- rt2800_bbp_write(rt2x00dev, 49, bbp);
- }
-+//serge:just print results after config channel - don't forget to remove nahren (c) <- this is copyright, not ref to comments :)
-+ bbp = rt2800_bbp_dcoc_read(rt2x00dev, 0x03);
-+ pr_info("BBP tx/rx compensation control=0x%02x\n", bbp);
- }
-
- static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev)
-@@ -5527,7 +5617,7 @@ void rt2800_vco_calibration(struct rt2x0
- }
- rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-
-- if (rt2x00_rt(rt2x00dev, RT6352)) {
-+ if (rt2x00_rt(rt2x00dev, RT6352)) {//serge:remark - move all this code to rfcsr_6352 init?
- if (rt2x00dev->default_ant.rx_chain_num == 1) {
- rt2800_bbp_write(rt2x00dev, 91, 0x07);
- rt2800_bbp_write(rt2x00dev, 95, 0x1A);
-@@ -5695,7 +5785,8 @@ static inline void rt2800_set_vgc(struct
- if (qual->vgc_level != vgc_level) {
- if (rt2x00_rt(rt2x00dev, RT3572) ||
- rt2x00_rt(rt2x00dev, RT3593) ||
-- rt2x00_rt(rt2x00dev, RT3883)) {
-+ rt2x00_rt(rt2x00dev, RT3883) ||
-+ rt2x00_rt(rt2x00dev, RT6352)) {//serge: rt6352 too (3)
- rt2800_bbp_write_with_rx_chain(rt2x00dev, 66,
- vgc_level);
- } else if (rt2x00_rt(rt2x00dev, RT5592)) {
-@@ -5930,7 +6021,7 @@ static int rt2800_init_registers(struct
- 0x00550055);
- } else {
- rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
-- rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
-+ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0001);//serge:was 0x000C0000 (2)
- rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
- rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000);
- rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0);
-@@ -6195,6 +6286,29 @@ static int rt2800_init_registers(struct
- reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
- rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, 125);
- rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
-+ } else if (rt2x00_is_soc(rt2x00dev)) {//serge:which value correct? (4)
-+ struct clk *clk = clk_get_sys("bus", NULL);
-+ int rate;
-+
-+ if (IS_ERR(clk)) {
-+ rt2x00_warn(rt2x00dev, "system bus clock undefined\n");
-+ clk = clk_get_sys("cpu", NULL);
-+
-+ if (IS_ERR(clk))
-+ rate = 125;
-+ else {
-+ rate = clk_get_rate(clk) / 3000000;
-+ clk_put(clk);
-+ }
-+ } else {
-+ rate = clk_get_rate(clk) / 1000000;
-+ clk_put(clk);
-+ }
-+
-+ rt2x00_info(rt2x00dev, "set US_CYC=%dMHz\n", rate);
-+ reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
-+ rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, rate);
-+ rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
- }
-
- reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG0);
-@@ -6981,26 +7095,7 @@ static void rt2800_init_bbp_5592(struct
- if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C))
- rt2800_bbp_write(rt2x00dev, 103, 0xc0);
- }
--
--static void rt2800_bbp_glrt_write(struct rt2x00_dev *rt2x00dev,
-- const u8 reg, const u8 value)
--{
-- rt2800_bbp_write(rt2x00dev, 195, reg);
-- rt2800_bbp_write(rt2x00dev, 196, value);
--}
--
--static void rt2800_bbp_dcoc_write(struct rt2x00_dev *rt2x00dev,
-- const u8 reg, const u8 value)
--{
-- rt2800_bbp_write(rt2x00dev, 158, reg);
-- rt2800_bbp_write(rt2x00dev, 159, value);
--}
--
--static u8 rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev, const u8 reg)
--{
-- rt2800_bbp_write(rt2x00dev, 158, reg);
-- return rt2800_bbp_read(rt2x00dev, 159);
--}
-+//serge: move these function upper
-
- static void rt2800_init_bbp_6352(struct rt2x00_dev *rt2x00dev)
- {
-@@ -8635,7 +8730,7 @@ static void rt2800_r_calibration(struct
- r_cal_code = (u8)rcalcode;
-
- rt2800_rfcsr_write_bank(rt2x00dev, 0, 7, r_cal_code);
--
-+ pr_info("RF bank 0 reg 5=0x%02x\n", r_cal_code);//serge: just for info to compare with vendor driver
- rt2800_bbp_write(rt2x00dev, 22, 0x0);
-
- bytevalue = rt2800_bbp_read(rt2x00dev, 21);
-@@ -8693,7 +8788,7 @@ static void rt2800_rxdcoc_calibration(st
- break;
- }
-
-- saverfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 0);
-+ saverfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4);//serge: was 0 - typo? (6)
- saverfb7r4 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 4);
- saverfb5r4 = saverfb5r4 & (~0x40);
- saverfb7r4 = saverfb7r4 & (~0x40);
-@@ -9022,13 +9117,15 @@ static void rt2800_rxiq_calibration(stru
- rt2x00_info(rt2x00dev, "RXIQ G_imb=%d, Ph_rx=%d\n", g_imb, ph_rx);
-
- if ((ph_rx > 20) || (ph_rx < -20)) {
-+ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL(ph_rx=%d out of [-20..20]", ph_rx);//serge:just to see value
- ph_rx = 0;
-- rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
-+ //rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
- }
-
- if ((g_imb > 12) || (g_imb < -12)) {
-+ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL(g_imb=%d out of (-12..12]", g_imb);//serge:just to see the reason
- g_imb = 0;
-- rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
-+ //rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
- }
- }
- else {
-@@ -9039,11 +9136,21 @@ static void rt2800_rxiq_calibration(stru
- }
-
- if (ch_idx == 0) {
-+ //serge: just to see values
-+ pr_info("RXIQ RX0 g_imb (0x37, %2x) ph_rx (0x35, %2x)\n",
-+ g_imb & 0x3f,
-+ ph_rx & 0x3f
-+ );
- rt2800_bbp_write(rt2x00dev, 158, 0x37);
- rt2800_bbp_write(rt2x00dev, 159, g_imb & 0x3f);
- rt2800_bbp_write(rt2x00dev, 158, 0x35);
- rt2800_bbp_write(rt2x00dev, 159, ph_rx & 0x3f);
- } else {
-+ //serge: just to see values
-+ pr_info("RXIQ RX1 g_imb (0x55, %2x) ph_rx (0x53, %2x)\n",
-+ g_imb & 0x3f,
-+ ph_rx & 0x3f
-+ );
- rt2800_bbp_write(rt2x00dev, 158, 0x55);
- rt2800_bbp_write(rt2x00dev, 159, g_imb & 0x3f);
- rt2800_bbp_write(rt2x00dev, 158, 0x53);
-@@ -9745,6 +9852,15 @@ void rt2800_loft_iq_calibration(struct r
- }
-
- for (rf_alc_idx = 0; rf_alc_idx < 3; rf_alc_idx++) {
-+ //serge: just to see values
-+ pr_info("LOFT ALC (0xb0, %2x) I0 (0xb1, %2x) Q0 (0xb2, %2x) I1 (0xb8, %2x) Q1 (0xb9, %2x)\n",
-+ rf_alc_idx,
-+ loft_dc_search_result[CHAIN_0][rf_alc_idx][0x00] & 0x3F,
-+ loft_dc_search_result[CHAIN_0][rf_alc_idx][0x01] & 0x3F,
-+ loft_dc_search_result[CHAIN_1][rf_alc_idx][0x00] & 0x3F,
-+ loft_dc_search_result[CHAIN_1][rf_alc_idx][0x01] & 0x3F
-+ );
-+
- for (idx = 0; idx < 4; idx++) {
- rt2800_bbp_write(rt2x00dev, 158, 0xB0);
- bbp = (idx<<2) + rf_alc_idx;
-@@ -10669,6 +10785,7 @@ static void rt2800_init_rfcsr_6352(struc
- rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
- }
-
-+ rt6352_enable_pa_pin(rt2x00dev, 0);//serge: vendor driver do it before calibration (7b)
- rt2800_r_calibration(rt2x00dev);
- rt2800_rf_self_txdc_cal(rt2x00dev);
- rt2800_rxdcoc_calibration(rt2x00dev);
-@@ -10676,6 +10793,29 @@ static void rt2800_init_rfcsr_6352(struc
- rt2800_bw_filter_calibration(rt2x00dev, false);
- rt2800_loft_iq_calibration(rt2x00dev);
- rt2800_rxiq_calibration(rt2x00dev);
-+ rt6352_enable_pa_pin(rt2x00dev, 1);//serge: vendor driver do it after calibration (7b)
-+ /* Vendor driver restore iLNA/iPA before
-+ recalibration and set correct values after.
-+ Openwrt driver init iLNA and iPA but restore only
-+ ePA values after recalibration.
-+ So set eLNA values only
-+ */
-+ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {//serge: rf regs never corrected for eLNA (7a)
-+ rt2x00_info(rt2x00dev, "Correct RF/BBP for eLNA!\n");
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x66);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x20);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 18, 0x42);
-+ rt2800_bbp_write(rt2x00dev, 75, 0x68);//serge: move bbp eLNA init here?
-+ rt2800_bbp_write(rt2x00dev, 76, 0x4C);
-+ rt2800_bbp_write(rt2x00dev, 79, 0x1C);
-+ rt2800_bbp_write(rt2x00dev, 80, 0x0C);
-+ rt2800_bbp_write(rt2x00dev, 82, 0xB6);
-+ /* bank 0 RF reg 42 and glrt BBP reg 141
-+ will be set in config channel function
-+ in dependence of channel and HT20/HT40
-+ so don't touch it
-+ */
-+ }
- }
-
- static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -28,6 +28,7 @@
- #include <linux/average.h>
- #include <linux/usb.h>
- #include <linux/clk.h>
-+#include <linux/pinctrl/consumer.h>
- #include <linux/rt2x00_platform.h>
-
- #include <net/mac80211.h>
-@@ -1029,6 +1030,11 @@ struct rt2x00_dev {
-
- /* Clock for System On Chip devices. */
- struct clk *clk;
-+
-+ /* pinctrl and states for System On Chip devices with PA/LNA. */
-+ struct pinctrl *pinctrl;
-+ struct pinctrl_state *pins_default;
-+ struct pinctrl_state *pins_pa_gpio;
- };
-
- struct rt2x00_bar_list_entry {
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00soc.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00soc.c
-@@ -97,6 +97,21 @@ int rt2x00soc_probe(struct platform_devi
- if (retval)
- goto exit_free_reg;
-
-+ rt2x00dev->pinctrl = devm_pinctrl_get(&pdev->dev);
-+ if (IS_ERR(rt2x00dev->pinctrl)) {
-+ rt2x00dev->pinctrl = NULL;
-+ rt2x00dev->pins_default = NULL;
-+ rt2x00dev->pins_pa_gpio = NULL;
-+ } else {
-+ rt2x00dev->pins_default = pinctrl_lookup_state(rt2x00dev->pinctrl, "default");
-+ if (IS_ERR(rt2x00dev->pins_default))
-+ rt2x00dev->pins_default = NULL;
-+
-+ rt2x00dev->pins_pa_gpio = pinctrl_lookup_state(rt2x00dev->pinctrl, "pa_gpio");
-+ if (IS_ERR(rt2x00dev->pins_pa_gpio))
-+ rt2x00dev->pins_pa_gpio = NULL;
-+ }
-+
- return 0;
-
- exit_free_reg:
diff --git a/package/kernel/mac80211/patches/rt2x00/992-rt2x00-set-SoC-wmac-clock-register.patch b/package/kernel/mac80211/patches/rt2x00/992-rt2x00-set-SoC-wmac-clock-register.patch
new file mode 100644
index 0000000000..194d7d6cfd
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/992-rt2x00-set-SoC-wmac-clock-register.patch
@@ -0,0 +1,54 @@
+From 6569ed4ba88105d7ee877abba8f22e4965a29856 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Fri, 16 Sep 2022 20:38:20 +0100
+Subject: [PATCH 14/16] rt2x00: set SoC wmac clock register
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
+
+Instead of using the default value 33 (pci), set US_CYC_CNT init based
+on Programming guide:
+If available, set chipset bus clock with fallback to cpu clock/3.
+
+Reported-by: Serge Vasilugin <vasilugin at yandex.ru>
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+---
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 21 +++++++++++++++++++
+ 1 file changed, 21 insertions(+)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -6197,6 +6197,27 @@ static int rt2800_init_registers(struct
+ reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
+ rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, 125);
+ rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
++ } else if (rt2x00_is_soc(rt2x00dev)) {
++ struct clk *clk = clk_get_sys("bus", NULL);
++ int rate;
++
++ if (IS_ERR(clk)) {
++ clk = clk_get_sys("cpu", NULL);
++
++ if (IS_ERR(clk)) {
++ rate = 125;
++ } else {
++ rate = clk_get_rate(clk) / 3000000;
++ clk_put(clk);
++ }
++ } else {
++ rate = clk_get_rate(clk) / 1000000;
++ clk_put(clk);
++ }
++
++ reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
++ rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, rate);
++ rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
+ }
+
+ reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG0);
diff --git a/package/kernel/mac80211/patches/rt2x00/993-rt2x00-correctly-set-BBP-register-86-for-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/993-rt2x00-correctly-set-BBP-register-86-for-MT7620.patch
new file mode 100644
index 0000000000..0b673bcc91
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/993-rt2x00-correctly-set-BBP-register-86-for-MT7620.patch
@@ -0,0 +1,36 @@
+From 3ae108de9e64e44c724ce150d804c56a4e72ea4e Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Fri, 16 Sep 2022 20:42:11 +0100
+Subject: [PATCH 15/16] rt2x00: correctly set BBP register 86 for MT7620
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
+
+Instead of 0 set the correct value for BBP register 86 for MT7620.
+
+Reported-by: Serge Vasilugin <vasilugin at yandex.ru>
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -4193,7 +4193,10 @@ static void rt2800_config_channel(struct
+ rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
+ rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+ rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
+- rt2800_bbp_write(rt2x00dev, 86, 0);
++ if (rt2x00_rt(rt2x00dev, RT6352))
++ rt2800_bbp_write(rt2x00dev, 86, 0x38);
++ else
++ rt2800_bbp_write(rt2x00dev, 86, 0);
+ }
+
+ if (rf->channel <= 14) {
diff --git a/package/kernel/mac80211/patches/rt2x00/994-rt2x00-import-support-for-external-LNA-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/994-rt2x00-import-support-for-external-LNA-on-MT7620.patch
new file mode 100644
index 0000000000..3d5849b8b2
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/994-rt2x00-import-support-for-external-LNA-on-MT7620.patch
@@ -0,0 +1,161 @@
+From 0fce1109f894ec7fcd72cb098843a1eff786716a Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Fri, 16 Sep 2022 20:49:42 +0100
+Subject: [PATCH 16/16] rt2x00: import support for external LNA on MT7620
+To: linux-wireless at vger.kernel.org,
+ Stanislaw Gruszka <stf_xl at wp.pl>,
+ Helmut Schaa <helmut.schaa at googlemail.com>
+Cc: Kalle Valo <kvalo at kernel.org>,
+ David S. Miller <davem at davemloft.net>,
+ Eric Dumazet <edumazet at google.com>,
+ Jakub Kicinski <kuba at kernel.org>,
+ Paolo Abeni <pabeni at redhat.com>,
+ Johannes Berg <johannes.berg at intel.com>
+
+In order to carry out calibration on boards with ePA or eLNA the PA pin
+needs to be switch to GPIO mode on MT7620. Implement that by selecting
+pinctrl state "pa_gpio" which should be defined for MT7620 boards with
+eLNA or ePA beside the "default" state.
+
+Reported-by: Serge Vasilugin <vasilugin at yandex.ru>
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+---
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 58 +++++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2x00.h | 5 ++
+ .../net/wireless/ralink/rt2x00/rt2x00soc.c | 15 +++++
+ 3 files changed, 78 insertions(+)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -304,6 +304,24 @@ static void rt2800_rf_write(struct rt2x0
+ mutex_unlock(&rt2x00dev->csr_mutex);
+ }
+
++void rt6352_enable_pa_pin(struct rt2x00_dev *rt2x00dev, int enable)
++{
++ if (!rt2x00dev->pinctrl)
++ return;
++
++ if (enable) {
++ if (!rt2x00dev->pins_default)
++ return;
++
++ pinctrl_select_state(rt2x00dev->pinctrl, rt2x00dev->pins_default);
++ } else {
++ if (!rt2x00dev->pins_pa_gpio)
++ return;
++
++ pinctrl_select_state(rt2x00dev->pinctrl, rt2x00dev->pins_pa_gpio);
++ }
++}
++
+ static const unsigned int rt2800_eeprom_map[EEPROM_WORD_COUNT] = {
+ [EEPROM_CHIP_ID] = 0x0000,
+ [EEPROM_VERSION] = 0x0001,
+@@ -4436,6 +4454,29 @@ static void rt2800_config_channel(struct
+ rt2800_register_write(rt2x00dev, TX1_RF_GAIN_ATTEN,
+ 0x6C6C6B6C);
+ }
++
++ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
++ reg = rt2800_register_read(rt2x00dev, RF_CONTROL3);
++ reg |= 0x00000101;
++ rt2800_register_write(rt2x00dev, RF_CONTROL3, reg);
++
++ reg = rt2800_register_read(rt2x00dev, RF_BYPASS3);
++ reg |= 0x00000101;
++ rt2800_register_write(rt2x00dev, RF_BYPASS3, reg);
++
++ rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x66);
++ rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x20);
++ rt2800_rfcsr_write_chanreg(rt2x00dev, 18, 0x42);
++ rt2800_bbp_write(rt2x00dev, 75, 0x68);
++ rt2800_bbp_write(rt2x00dev, 76, 0x4C);
++ rt2800_bbp_write(rt2x00dev, 79, 0x1C);
++ rt2800_bbp_write(rt2x00dev, 80, 0x0C);
++ rt2800_bbp_write(rt2x00dev, 82, 0xB6);
++ /* bank 0 RF reg 42 and glrt BBP reg 141 will be set in
++ * config channel function in dependence of channel and
++ * HT20/HT40 so don't touch it
++ */
++ }
+ }
+
+ bbp = rt2800_bbp_read(rt2x00dev, 4);
+@@ -10641,6 +10682,7 @@ static void rt2800_init_rfcsr_6352(struc
+ rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
+ rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
+
++ rt6352_enable_pa_pin(rt2x00dev, 0);
+ rt2800_r_calibration(rt2x00dev);
+ rt2800_rf_self_txdc_cal(rt2x00dev);
+ rt2800_rxdcoc_calibration(rt2x00dev);
+@@ -10648,6 +10690,22 @@ static void rt2800_init_rfcsr_6352(struc
+ rt2800_bw_filter_calibration(rt2x00dev, false);
+ rt2800_loft_iq_calibration(rt2x00dev);
+ rt2800_rxiq_calibration(rt2x00dev);
++ rt6352_enable_pa_pin(rt2x00dev, 1);
++
++ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
++ rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x66);
++ rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x20);
++ rt2800_rfcsr_write_chanreg(rt2x00dev, 18, 0x42);
++ rt2800_bbp_write(rt2x00dev, 75, 0x68);
++ rt2800_bbp_write(rt2x00dev, 76, 0x4C);
++ rt2800_bbp_write(rt2x00dev, 79, 0x1C);
++ rt2800_bbp_write(rt2x00dev, 80, 0x0C);
++ rt2800_bbp_write(rt2x00dev, 82, 0xB6);
++ /* bank 0 RF reg 42 and glrt BBP reg 141 will be set in config
++ * channel function in dependence of channel and HT20/HT40,
++ * so don't touch them here.
++ */
++ }
+ }
+
+ static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+@@ -28,6 +28,7 @@
+ #include <linux/average.h>
+ #include <linux/usb.h>
+ #include <linux/clk.h>
++#include <linux/pinctrl/consumer.h>
+ #include <linux/rt2x00_platform.h>
+
+ #include <net/mac80211.h>
+@@ -1029,6 +1030,11 @@ struct rt2x00_dev {
+
+ /* Clock for System On Chip devices. */
+ struct clk *clk;
++
++ /* pinctrl and states for System On Chip devices with PA/LNA. */
++ struct pinctrl *pinctrl;
++ struct pinctrl_state *pins_default;
++ struct pinctrl_state *pins_pa_gpio;
+ };
+
+ struct rt2x00_bar_list_entry {
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00soc.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00soc.c
+@@ -97,6 +97,21 @@ int rt2x00soc_probe(struct platform_devi
+ if (retval)
+ goto exit_free_reg;
+
++ rt2x00dev->pinctrl = devm_pinctrl_get(&pdev->dev);
++ if (IS_ERR(rt2x00dev->pinctrl)) {
++ rt2x00dev->pinctrl = NULL;
++ rt2x00dev->pins_default = NULL;
++ rt2x00dev->pins_pa_gpio = NULL;
++ } else {
++ rt2x00dev->pins_default = pinctrl_lookup_state(rt2x00dev->pinctrl, "default");
++ if (IS_ERR(rt2x00dev->pins_default))
++ rt2x00dev->pins_default = NULL;
++
++ rt2x00dev->pins_pa_gpio = pinctrl_lookup_state(rt2x00dev->pinctrl, "pa_gpio");
++ if (IS_ERR(rt2x00dev->pins_pa_gpio))
++ rt2x00dev->pins_pa_gpio = NULL;
++ }
++
+ return 0;
+
+ exit_free_reg:
diff --git a/package/kernel/mac80211/patches/rt2x00/990-rt2x00-mt7620-introduce-accessors-for-CHIP_VER-register.patch b/package/kernel/mac80211/patches/rt2x00/995-rt2x00-mt7620-introduce-accessors-for-CHIP_VER-register.patch
similarity index 100%
rename from package/kernel/mac80211/patches/rt2x00/990-rt2x00-mt7620-introduce-accessors-for-CHIP_VER-register.patch
rename to package/kernel/mac80211/patches/rt2x00/995-rt2x00-mt7620-introduce-accessors-for-CHIP_VER-register.patch
diff --git a/package/kernel/mac80211/patches/rt2x00/991-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch b/package/kernel/mac80211/patches/rt2x00/996-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch
similarity index 95%
rename from package/kernel/mac80211/patches/rt2x00/991-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch
rename to package/kernel/mac80211/patches/rt2x00/996-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch
index 40b20ec594..de09186618 100644
--- a/package/kernel/mac80211/patches/rt2x00/991-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch
+++ b/package/kernel/mac80211/patches/rt2x00/996-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch
@@ -14,7 +14,7 @@
*/
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -3698,14 +3698,16 @@ static void rt2800_config_channel_rf7620
+@@ -3736,14 +3736,16 @@ static void rt2800_config_channel_rf7620
rt2x00_set_field8(&rfcsr, RFCSR19_K, rf->rf4);
rt2800_rfcsr_write(rt2x00dev, 19, rfcsr);
@@ -39,7 +39,7 @@
rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_EN_MT7620,
-@@ -3739,18 +3741,23 @@ static void rt2800_config_channel_rf7620
+@@ -3777,18 +3779,23 @@ static void rt2800_config_channel_rf7620
rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x20);
}
@@ -73,7 +73,7 @@
if (!test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) {
if (conf_is_ht40(conf)) {
-@@ -3850,25 +3857,29 @@ static void rt2800_config_alc(struct rt2
+@@ -3896,25 +3903,29 @@ static void rt2800_config_alc(struct rt2
if (i == 10000)
rt2x00_warn(rt2x00dev, "Wait MAC Status to MAX !!!\n");
@@ -121,12 +121,12 @@
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, mac_sys_ctrl);
rt2800_vco_calibration(rt2x00dev);
-@@ -5906,18 +5917,33 @@ static int rt2800_init_registers(struct
+@@ -5978,18 +5989,33 @@ static int rt2800_init_registers(struct
} else if (rt2x00_rt(rt2x00dev, RT5350)) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
} else if (rt2x00_rt(rt2x00dev, RT6352)) {
- rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
-- rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
+- rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0001);
- rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
- rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000);
- rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0);
@@ -150,7 +150,7 @@
+ 0x00550055);
+ } else {
+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
-+ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
++ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0001);
+ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
+ rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000);
+ rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0);
@@ -167,7 +167,7 @@
reg = rt2800_register_read(rt2x00dev, TX_ALC_CFG_1);
rt2x00_set_field32(®, TX_ALC_CFG_1_ROS_BUSY_EN, 0);
rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg);
-@@ -7061,14 +7087,16 @@ static void rt2800_init_bbp_6352(struct
+@@ -7134,14 +7160,16 @@ static void rt2800_init_bbp_6352(struct
rt2800_bbp_write(rt2x00dev, 188, 0x00);
rt2800_bbp_write(rt2x00dev, 189, 0x00);
@@ -192,7 +192,7 @@
/* BBP for G band GLRT function (BBP_128 ~ BBP_221) */
rt2800_bbp_glrt_write(rt2x00dev, 0, 0x00);
-@@ -10407,31 +10435,36 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -10466,31 +10494,36 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rfcsr_write(rt2x00dev, 42, 0x5B);
rt2800_rfcsr_write(rt2x00dev, 43, 0x00);
@@ -254,7 +254,7 @@
/* Initialize RF channel register to default value */
rt2800_rfcsr_write_chanreg(rt2x00dev, 0, 0x03);
-@@ -10497,63 +10530,71 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -10556,63 +10589,71 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rfcsr_write_bank(rt2x00dev, 6, 45, 0xC5);
@@ -383,7 +383,7 @@
/* Initialize RF DC calibration register to default value */
rt2800_rfcsr_write_dccal(rt2x00dev, 0, 0x47);
-@@ -10616,12 +10657,17 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -10675,12 +10716,17 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rfcsr_write_dccal(rt2x00dev, 62, 0x00);
rt2800_rfcsr_write_dccal(rt2x00dev, 63, 0x00);
@@ -404,5 +404,5 @@
+ rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
+ }
+ rt6352_enable_pa_pin(rt2x00dev, 0);
rt2800_r_calibration(rt2x00dev);
- rt2800_rf_self_txdc_cal(rt2x00dev);
More information about the lede-commits
mailing list