[openwrt/openwrt] ramips: add support for Linksys E7350
LEDE Commits
lede-commits at lists.infradead.org
Sat Sep 10 16:53:42 PDT 2022
hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/f4eef5f2a18400bc7f548d629e1d5825a2b26e5a
commit f4eef5f2a18400bc7f548d629e1d5825a2b26e5a
Author: Rosen Penev <rosenp at gmail.com>
AuthorDate: Mon Mar 22 14:06:14 2021 -0700
ramips: add support for Linksys E7350
Linksys E7350 is an 802.11ax (Wi-Fi 6) router, based on MediaTek
MT7621A.
Specifications:
- SoC: MT7621 (880MHz, 2 Cores)
- RAM: 256 MB
- Flash: 128 MB NAND
- Wi-Fi:
- MT7915D: 2.4/5 GHz (DBDC)
- Ethernet: 5x 1GiE MT7530
- USB: 1x USB 3.0
- UART: J4 (57600 baud)
- Pinout: [3V3] (TXD) (RXD) (blank) (GND)
Notes:
* This device has a dual-boot partition scheme, but this firmware works
only on boot partition 1.
Installation:
Upload the generated factory.bin image via the stock web firmware
updater.
Signed-off-by: Rosen Penev <rosenp at gmail.com>
---
package/boot/uboot-envtools/files/ramips | 1 +
target/linux/ramips/dts/mt7621_linksys_e7350.dts | 205 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 9 +
.../ramips/mt7621/base-files/etc/board.d/01_leds | 7 +
.../mt7621/base-files/etc/board.d/02_network | 3 +-
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 3 +-
.../ramips/mt7621/base-files/etc/init.d/bootcount | 1 +
.../mt7621/base-files/lib/upgrade/platform.sh | 1 +
8 files changed, 228 insertions(+), 2 deletions(-)
diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips
index 46c218c885..194f6561d4 100644
--- a/package/boot/uboot-envtools/files/ramips
+++ b/package/boot/uboot-envtools/files/ramips
@@ -52,6 +52,7 @@ h3c,tx1800-plus|\
h3c,tx1801-plus|\
h3c,tx1806|\
jcg,q20|\
+linksys,e7350|\
netgear,wax202)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
;;
diff --git a/target/linux/ramips/dts/mt7621_linksys_e7350.dts b/target/linux/ramips/dts/mt7621_linksys_e7350.dts
new file mode 100644
index 0000000000..0cdfcb4683
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_linksys_e7350.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "linksys,e7350", "mediatek,mt7621-soc";
+ model = "Linksys E7350";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-wps {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_WPS;
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: led-power {
+ label = "blue:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-wan {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_WAN;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-wan2 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WAN;
+ gpios = <&switch0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-lan4 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <4>;
+ gpios = <&switch0 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led-lan3 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <3>;
+ gpios = <&switch0 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led-lan2 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <2>;
+ gpios = <&switch0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-lan1 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <1>;
+ gpios = <&switch0 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "Boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition at 80000 {
+ label = "Config";
+ reg = <0x80000 0x80000>;
+ };
+
+ factory: partition at 100000 {
+ label = "Factory";
+ reg = <0x100000 0x80000>;
+ read-only;
+ };
+
+ partition at 180000 {
+ label = "firmware";
+ reg = <0x180000 0x3000000>;
+
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "kernel";
+ reg = <0x0 0x400000>;
+ };
+
+ partition at 400000 {
+ label = "ubi";
+ reg = <0x400000 0x2c00000>;
+ };
+ };
+
+ partition at 3180000 {
+ label = "alt_firmware";
+ reg = <0x3180000 0x3000000>;
+ read-only;
+ };
+
+ partition at 6180000 {
+ label = "cbtinfo";
+ reg = <0x6180000 0x80000>;
+ read-only;
+ };
+ /* seems to be the end here. Can't read past 0x6200000 */
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie1 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy0>;
+};
+
+&mdio {
+ ethphy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+};
+
+&switch0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ports {
+ port at 1 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port at 2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port at 3 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port at 4 {
+ status = "okay";
+ label = "lan1";
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 974299f26b..661f44d5e9 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -1192,6 +1192,15 @@ define Device/linksys_e5600
endef
TARGET_DEVICES += linksys_e5600
+define Device/linksys_e7350
+ $(Device/belkin_rt1800)
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := E7350
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
+ append-ubi | check-size | belkin-header GOLF 1 9.9.9
+endef
+TARGET_DEVICES += linksys_e7350
+
define Device/linksys_ea7xxx
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index aebdcd5ad9..0ac67e9670 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -75,6 +75,13 @@ gnubee,gb-pc2)
linksys,e5600)
ucidef_set_led_netdev "wan" "wan link" "blue:wan" "wan" "link"
;;
+linksys,e7350)
+ ucidef_set_led_netdev "lan1" "lan1" "blue:lan-1" "lan1"
+ ucidef_set_led_netdev "lan2" "lan2" "blue:lan-2" "lan2"
+ ucidef_set_led_netdev "lan3" "lan4" "blue:lan-3" "lan3"
+ ucidef_set_led_netdev "lan4" "lan4" "blue:lan-4" "lan4"
+ ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
+ ;;
linksys,ea6350-v4|\
linksys,ea7300-v1|\
linksys,ea7300-v2|\
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 5b9eca0779..f3913a1d1c 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -205,7 +205,8 @@ ramips_setup_macs()
wan_mac=$lan_mac
label_mac=$lan_mac
;;
- belkin,rt1800)
+ belkin,rt1800|\
+ linksys,e7350)
lan_mac=$(mtd_get_mac_ascii Config lan_hwaddr)
wan_mac=$(mtd_get_mac_ascii Config wan_hwaddr)
label_mac=$lan_mac
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 98bc6c1ccf..3c2872ae2c 100644
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -84,7 +84,8 @@ case "$board" in
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
;;
- belkin,rt1800)
+ belkin,rt1800|\
+ linksys,e7350)
hw_mac_addr=$(mtd_get_mac_ascii Config wan_hwaddr)
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
diff --git a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
index a77fc41f07..99b318a922 100755
--- a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
+++ b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
@@ -23,6 +23,7 @@ boot() {
mtd resetbc s_env || true
;;
belkin,rt1800|\
+ linksys,e7350|\
samknows,whitebox-v8)
fw_setenv bootcount 0
;;
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index 997b4d35ff..05907536fe 100755
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -71,6 +71,7 @@ platform_do_upgrade() {
iptime,t5004|\
jcg,q20|\
linksys,e5600|\
+ linksys,e7350|\
linksys,ea6350-v4|\
linksys,ea7300-v1|\
linksys,ea7300-v2|\
More information about the lede-commits
mailing list