[openwrt/openwrt] ipq40xx: add support for Mikrotik wAP R ac / LTE / LTE6
LEDE Commits
lede-commits at lists.infradead.org
Sun Nov 27 05:30:58 PST 2022
lynxis pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/d4c460648dc28a7e8f2082101159971f6858c743
commit d4c460648dc28a7e8f2082101159971f6858c743
Author: Alexander Couzens <lynxis at fe80.eu>
AuthorDate: Sat Nov 12 12:13:46 2022 +0000
ipq40xx: add support for Mikrotik wAP R ac / LTE / LTE6
The Mikrotik wAP R AC is an outdoor, dual band, dual radio (802.11ac) AP
with a miniPCIe slot for a LTE modem.
The wAP R AC is similar to the wAP AC but with the miniPCIe slot.
The wAP R AC requires installing a LTE modem.
The wAP LTE and wAP LTE6 comes with a LTE modem installed.
See https://mikrotik.com/product/wap_r_ac for more info.
Specifications:
- SoC: Qualcomm Atheros IPQ4018
- CPU: 4x ARM Cortex A7
- RAM: 128MB
- Storage: 16MB NOR flash
- Wireless:
- Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, internal antenna
- Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, internal antenna
- Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 2x 1000/100/10 ports
one with 802.3af/at PoE in
- 1x Mini PCI-E port (USB2)
Installation:
Boot the initramfs image via TFTP, then flash the sysupgrade image using
sysupgrade. Details at https://openwrt.org/toh/mikrotik/common.
Signed-off-by: Alexander Couzens <lynxis at fe80.eu>
---
.../ipq40xx/base-files/etc/board.d/02_network | 4 +-
.../etc/hotplug.d/firmware/11-ath10k-caldata | 16 +-
.../lib/preinit/05_set_iface_mac_ipq40xx.sh | 4 +-
.../ipq40xx/base-files/lib/upgrade/platform.sh | 4 +-
.../arch/arm/boot/dts/qcom-ipq4018-wap-ac-lte.dts | 45 +++++
.../arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts | 211 +--------------------
...ipq4018-wap-ac.dts => qcom-ipq4018-wap-ac.dtsi} | 3 -
.../arch/arm/boot/dts/qcom-ipq4018-wap-r-ac.dts | 45 +++++
target/linux/ipq40xx/image/mikrotik.mk | 20 ++
9 files changed, 132 insertions(+), 220 deletions(-)
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 24b59d6630..74f39ef6de 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -64,7 +64,9 @@ ipq40xx_setup_interfaces()
mobipromo,cm520-79f)
ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
;;
- mikrotik,wap-ac)
+ mikrotik,wap-ac|\
+ mikrotik,wap-ac-lte|\
+ mikrotik,wap-r-ac)
ucidef_set_interface_lan "sw-eth1 sw-eth2"
;;
netgear,rbr50|\
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 7498e1c710..7f41bdcfcc 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -113,7 +113,9 @@ case "$FIRMWARE" in
mikrotik,hap-ac2 |\
mikrotik,hap-ac3 |\
mikrotik,hap-ac3-lte6-kit |\
- mikrotik,wap-ac)
+ mikrotik,wap-ac |\
+ mikrotik,wap-ac-lte |\
+ mikrotik,wap-r-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
@@ -207,7 +209,9 @@ case "$FIRMWARE" in
mikrotik,hap-ac3 |\
mikrotik,hap-ac3-lte6-kit |\
mikrotik,sxtsq-5-ac |\
- mikrotik,wap-ac)
+ mikrotik,wap-ac |\
+ mikrotik,wap-ac-lte |\
+ mikrotik,wap-r-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
@@ -243,7 +247,9 @@ case "$FIRMWARE" in
mikrotik,hap-ac2 |\
mikrotik,hap-ac3 |\
mikrotik,hap-ac3-lte6-kit |\
- mikrotik,wap-ac)
+ mikrotik,wap-ac |\
+ mikrotik,wap-ac-lte |\
+ mikrotik,wap-r-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 )
@@ -257,7 +263,9 @@ case "$FIRMWARE" in
mikrotik,hap-ac3 |\
mikrotik,hap-ac3-lte6-kit |\
mikrotik,sxtsq-5-ac |\
- mikrotik,wap-ac)
+ mikrotik,wap-ac |\
+ mikrotik,wap-ac-lte |\
+ mikrotik,wap-r-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 )
diff --git a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
index ddfef1ab2d..ce0b55bb80 100644
--- a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
+++ b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
@@ -29,7 +29,9 @@ preinit_set_mac_address() {
ip link set dev lan1 address $(macaddr_add "$base_mac" 1)
ip link set dev eth0 address $(macaddr_setbit "$base_mac" 7)
;;
- mikrotik,wap-ac)
+ mikrotik,wap-ac|\
+ mikrotik,wap-ac-lte|\
+ mikrotik,wap-r-ac)
base_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
ip link set dev sw-eth1 address "$base_mac"
ip link set dev sw-eth2 address $(macaddr_add "$base_mac" 1)
diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
index 6b8f62d735..12fa9699c5 100644
--- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
@@ -177,7 +177,9 @@ platform_do_upgrade() {
mikrotik,hap-ac3-lte6-kit|\
mikrotik,lhgg-60ad|\
mikrotik,sxtsq-5-ac|\
- mikrotik,wap-ac)
+ mikrotik,wap-ac|\
+ mikrotik,wap-ac-lte|\
+ mikrotik,wap-r-ac)
[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
default_do_upgrade "$1"
;;
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac-lte.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac-lte.dts
new file mode 100644
index 0000000000..8ff18d92b7
--- /dev/null
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac-lte.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2022, Alexander Couzens <lynxis at fe80.eu> */
+
+#include "qcom-ipq4018-wap-ac.dtsi"
+
+/ {
+ model = "MikroTik wAP ac LTE";
+ compatible = "mikrotik,wap-ac-lte";
+
+ soc {
+ tcsr at 194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ usb3 at 8af8800 {
+ status = "okay";
+
+ dwc3 at 8a00000 {
+ phys = <&usb3_hs_phy>;
+ phy-names = "usb2-phy";
+ };
+ };
+ };
+};
+
+&tlmm {
+ enable-usb-power {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "enable USB power";
+ };
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts
index ecbdfac15f..1bfcbf1e33 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts
@@ -1,218 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2020, Robert Marko <robimarko at gmail.com> */
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
+#include "qcom-ipq4018-wap-ac.dtsi"
/ {
model = "MikroTik wAP ac";
compatible = "mikrotik,wap-ac";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x08000000>;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- led-boot = &led_user;
- led-failsafe = &led_user;
- led-running = &led_user;
- led-upgrade = &led_user;
- };
-
- soc {
- counter at 4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- tcsr at 1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr at 1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr at 1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power {
- label = "blue:power";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- led_user: user {
- label = "green:user";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- panic-indicator;
- };
- };
-};
-
-&prng {
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <2>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- status = "okay";
-
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- flash at 0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "Qualcomm";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition at 80000 {
- compatible = "mikrotik,routerboot-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- label = "RouterBoot";
- reg = <0x80000 0x80000>;
-
- hard_config {
- read-only;
- size = <0x2000>;
- };
-
- dtb_config {
- read-only;
- };
-
- soft_config {
- };
- };
-
- partition at 100000 {
- compatible = "mikrotik,minor";
- label = "firmware";
- reg = <0x100000 0xf00000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- status = "okay";
-
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&watchdog {
- status = "okay";
-};
-
-&mdio {
- status = "okay";
-};
-
-&gmac {
- status = "okay";
-};
-
-&switch {
- status = "okay";
-};
-
-&swport4 {
- status = "okay";
- label = "sw-eth2";
-};
-
-&swport5 {
- status = "okay";
- label = "sw-eth1";
-};
-
-&wifi0 {
- status = "okay";
-
- qcom,ath10k-calibration-variant = "MikroTik-wAP-ac";
-};
-
-&wifi1 {
- status = "okay";
-
- qcom,ath10k-calibration-variant = "MikroTik-wAP-ac";
};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dtsi
similarity index 98%
copy from target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts
copy to target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dtsi
index ecbdfac15f..777f46e3af 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dtsi
@@ -7,9 +7,6 @@
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
- model = "MikroTik wAP ac";
- compatible = "mikrotik,wap-ac";
-
memory {
device_type = "memory";
reg = <0x80000000 0x08000000>;
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-r-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-r-ac.dts
new file mode 100644
index 0000000000..e7f28f23cf
--- /dev/null
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-r-ac.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2022, Alexander Couzens <lynxis at fe80.eu> */
+
+#include "qcom-ipq4018-wap-ac.dtsi"
+
+/ {
+ model = "MikroTik wAP R ac";
+ compatible = "mikrotik,wap-r-ac";
+
+ soc {
+ tcsr at 194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ usb3 at 8af8800 {
+ status = "okay";
+
+ dwc3 at 8a00000 {
+ phys = <&usb3_hs_phy>;
+ phy-names = "usb2-phy";
+ };
+ };
+ };
+};
+
+&tlmm {
+ enable-usb-power {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "enable USB power";
+ };
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
diff --git a/target/linux/ipq40xx/image/mikrotik.mk b/target/linux/ipq40xx/image/mikrotik.mk
index 3eacedd9d8..f0e1f1aad3 100644
--- a/target/linux/ipq40xx/image/mikrotik.mk
+++ b/target/linux/ipq40xx/image/mikrotik.mk
@@ -78,3 +78,23 @@ define Device/mikrotik_wap-ac
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
endef
TARGET_DEVICES += mikrotik_wap-ac
+
+define Device/mikrotik_wap-r-ac
+ $(call Device/mikrotik_wap-ac)
+ DEVICE_MODEL := wAP R ac
+ DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi \
+ kmod-usb-acm kmod-usb-net-rndis
+ DEVICE_DTS := qcom-ipq4018-wap-r-ac
+endef
+TARGET_DEVICES += mikrotik_wap-r-ac
+
+define Device/mikrotik_wap-ac-lte
+ $(call Device/mikrotik_wap-ac)
+ DEVICE_MODEL := wAP ac LTE
+ DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi \
+ kmod-usb-acm kmod-usb-net-rndis
+ DEVICE_DTS := qcom-ipq4018-wap-ac-lte
+ DEVICE_ALT0_VENDOR = Mikrotik
+ DEVICE_ALT0_MODEL := wAP ac LTE6
+endef
+TARGET_DEVICES += mikrotik_wap-ac-lte
More information about the lede-commits
mailing list