[openwrt/openwrt] bcm27xx: disable duplicate sdhost driver

LEDE Commits lede-commits at lists.infradead.org
Wed Nov 23 13:36:07 PST 2022 

noltari pushed a commit to openwrt/openwrt.git, branch openwrt-22.03:
https://git.openwrt.org/3564c22e46d5b025b174ee9b25291413a4621b21

commit 3564c22e46d5b025b174ee9b25291413a4621b21
Author: John Audia <therealgraysky at proton.me>
AuthorDate: Sat Nov 19 08:41:25 2022 -0500

    bcm27xx: disable duplicate sdhost driver
    
    Enabling both CONFIG_MMC_BCM2835 and CONFIG_MMC_BCM2835_SDHOST causes this
    error in dmesg:
    Error: Driver 'sdhost-bcm2835' is already registered, aborting...
    
    Disabling CONFIG_MMC_BCM2835 and leaving CONFIG_MMC_BCM2835_SDHOST enabled
    avoids this error.
    
    Build-tested: bcm2711/RPi4B
    Run-tested: bcm2711/RPi4B
    
    Signed-off-by: John Audia <therealgraysky at proton.me>
    [Disable driver for all subtargets, refresh configs, tweak description]
    Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
    (cherry picked from commit 3f7cc9d0144dbc429d19c1801cc6be149f969db9)
---
 target/linux/bcm27xx/bcm2708/config-5.10 | 6 ++----
 target/linux/bcm27xx/bcm2709/config-5.10 | 7 +++----
 target/linux/bcm27xx/bcm2710/config-5.10 | 6 ++----
 target/linux/bcm27xx/bcm2711/config-5.10 | 6 ++----
 4 files changed, 9 insertions(+), 16 deletions(-)

diff --git a/target/linux/bcm27xx/bcm2708/config-5.10 b/target/linux/bcm27xx/bcm2708/config-5.10
index 56e076ba95..5ed6cf81bc 100644
--- a/target/linux/bcm27xx/bcm2708/config-5.10
+++ b/target/linux/bcm27xx/bcm2708/config-5.10
@@ -107,6 +107,7 @@ CONFIG_CPU_V6K=y
 CONFIG_CRC16=y
 CONFIG_CRYPTO_CRC32=y
 CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 CONFIG_CRYPTO_RNG2=y
 CONFIG_DCACHE_WORD_ACCESS=y
 CONFIG_DEBUG_BUGVERBOSE=y
@@ -235,7 +236,7 @@ CONFIG_MFD_SYSCON=y
 CONFIG_MIGHT_HAVE_CACHE_L2X0=y
 CONFIG_MIGRATION=y
 CONFIG_MMC=y
-CONFIG_MMC_BCM2835=y
+# CONFIG_MMC_BCM2835 is not set
 CONFIG_MMC_BCM2835_DMA=y
 CONFIG_MMC_BCM2835_MMC=y
 CONFIG_MMC_BCM2835_PIO_DMA_BARRIER=2
@@ -299,7 +300,6 @@ CONFIG_RESET_CONTROLLER=y
 # CONFIG_RESET_RASPBERRYPI is not set
 CONFIG_RESET_SIMPLE=y
 # CONFIG_RPIVID_MEM is not set
-# CONFIG_RPI_AXIPERF is not set
 # CONFIG_RPI_POE_POWER is not set
 CONFIG_SCSI=y
 # CONFIG_SCSI_LOWLEVEL is not set
@@ -319,8 +319,6 @@ CONFIG_SERIAL_MCTRL_GPIO=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SG_POOL=y
 CONFIG_SMSC_PHY=y
-# CONFIG_SND_SOC_AD193X_I2C is not set
-# CONFIG_SND_SOC_AD193X_SPI is not set
 CONFIG_SPARSE_IRQ=y
 CONFIG_SRCU=y
 # CONFIG_STRIP_ASM_SYMS is not set
diff --git a/target/linux/bcm27xx/bcm2709/config-5.10 b/target/linux/bcm27xx/bcm2709/config-5.10
index f15f6e3562..53a08d183e 100644
--- a/target/linux/bcm27xx/bcm2709/config-5.10
+++ b/target/linux/bcm27xx/bcm2709/config-5.10
@@ -132,6 +132,7 @@ CONFIG_CRYPTO_DRBG_MENU=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 CONFIG_CRYPTO_LIB_SHA256=y
 CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_RNG2=y
@@ -202,6 +203,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
 CONFIG_GENERIC_EARLY_IOREMAP=y
 CONFIG_GENERIC_GETTIMEOFDAY=y
 CONFIG_GENERIC_IDLE_POLL_SETUP=y
@@ -290,7 +292,7 @@ CONFIG_MICROCHIP_PHY=y
 CONFIG_MIGHT_HAVE_CACHE_L2X0=y
 CONFIG_MIGRATION=y
 CONFIG_MMC=y
-CONFIG_MMC_BCM2835=y
+# CONFIG_MMC_BCM2835 is not set
 CONFIG_MMC_BCM2835_DMA=y
 CONFIG_MMC_BCM2835_MMC=y
 CONFIG_MMC_BCM2835_PIO_DMA_BARRIER=2
@@ -376,7 +378,6 @@ CONFIG_RESET_RASPBERRYPI=y
 CONFIG_RESET_SIMPLE=y
 CONFIG_RFS_ACCEL=y
 # CONFIG_RPIVID_MEM is not set
-# CONFIG_RPI_AXIPERF is not set
 # CONFIG_RPI_POE_POWER is not set
 CONFIG_RPS=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
@@ -400,8 +401,6 @@ CONFIG_SG_POOL=y
 CONFIG_SMP=y
 CONFIG_SMP_ON_UP=y
 CONFIG_SMSC_PHY=y
-# CONFIG_SND_SOC_AD193X_I2C is not set
-# CONFIG_SND_SOC_AD193X_SPI is not set
 CONFIG_SPARSE_IRQ=y
 CONFIG_SRCU=y
 # CONFIG_STRIP_ASM_SYMS is not set
diff --git a/target/linux/bcm27xx/bcm2710/config-5.10 b/target/linux/bcm27xx/bcm2710/config-5.10
index 3a17bd6141..cf76430c57 100644
--- a/target/linux/bcm27xx/bcm2710/config-5.10
+++ b/target/linux/bcm27xx/bcm2710/config-5.10
@@ -136,6 +136,7 @@ CONFIG_CRYPTO_DRBG_MENU=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 CONFIG_CRYPTO_LIB_SHA256=y
 CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_RNG2=y
@@ -289,7 +290,7 @@ CONFIG_MFD_SYSCON=y
 CONFIG_MICROCHIP_PHY=y
 CONFIG_MIGRATION=y
 CONFIG_MMC=y
-CONFIG_MMC_BCM2835=y
+# CONFIG_MMC_BCM2835 is not set
 CONFIG_MMC_BCM2835_DMA=y
 CONFIG_MMC_BCM2835_MMC=y
 CONFIG_MMC_BCM2835_PIO_DMA_BARRIER=2
@@ -370,7 +371,6 @@ CONFIG_RESET_SIMPLE=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
 # CONFIG_RPIVID_MEM is not set
-# CONFIG_RPI_AXIPERF is not set
 # CONFIG_RPI_POE_POWER is not set
 CONFIG_RPS=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
@@ -393,8 +393,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SG_POOL=y
 CONFIG_SMP=y
 CONFIG_SMSC_PHY=y
-# CONFIG_SND_SOC_AD193X_I2C is not set
-# CONFIG_SND_SOC_AD193X_SPI is not set
 CONFIG_SPARSEMEM=y
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_MANUAL=y
diff --git a/target/linux/bcm27xx/bcm2711/config-5.10 b/target/linux/bcm27xx/bcm2711/config-5.10
index 0b804da346..2631999251 100644
--- a/target/linux/bcm27xx/bcm2711/config-5.10
+++ b/target/linux/bcm27xx/bcm2711/config-5.10
@@ -140,6 +140,7 @@ CONFIG_CRYPTO_DRBG_MENU=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 CONFIG_CRYPTO_LIB_SHA256=y
 CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_RNG2=y
@@ -296,7 +297,7 @@ CONFIG_MFD_CORE=y
 CONFIG_MFD_SYSCON=y
 CONFIG_MIGRATION=y
 CONFIG_MMC=y
-CONFIG_MMC_BCM2835=y
+# CONFIG_MMC_BCM2835 is not set
 CONFIG_MMC_BCM2835_DMA=y
 CONFIG_MMC_BCM2835_MMC=y
 CONFIG_MMC_BCM2835_PIO_DMA_BARRIER=2
@@ -382,7 +383,6 @@ CONFIG_RESET_SIMPLE=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
 # CONFIG_RPIVID_MEM is not set
-# CONFIG_RPI_AXIPERF is not set
 # CONFIG_RPI_POE_POWER is not set
 CONFIG_RPS=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
@@ -404,8 +404,6 @@ CONFIG_SERIAL_MCTRL_GPIO=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SG_POOL=y
 CONFIG_SMP=y
-# CONFIG_SND_SOC_AD193X_I2C is not set
-# CONFIG_SND_SOC_AD193X_SPI is not set
 CONFIG_SPARSEMEM=y
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_MANUAL=y

More information about the lede-commits mailing list