[openwrt/openwrt] ramips: create common dtsi for Sercomm Dxx routers
LEDE Commits
lede-commits at lists.infradead.org
Sun Nov 13 14:31:44 PST 2022
hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/e6b99a4e43917923e31494641f9ef00dd2a489ee
commit e6b99a4e43917923e31494641f9ef00dd2a489ee
Author: Mikhail Zhilkin <csharper2005 at gmail.com>
AuthorDate: Wed Nov 2 08:28:32 2022 +0000
ramips: create common dtsi for Sercomm Dxx routers
This commit adds common dtsi for the following Sercomm devices with 256
MB NAND:
Beeline Smartbox TURBO (Sercomm DF3)
Rostelecom RT-SF-1 (Sercomm DKG)
Also fixed typo ("Container" mtd name should be with a capital).
Signed-off-by: Mikhail Zhilkin <csharper2005 at gmail.com>
---
.../ramips/dts/mt7621_beeline_smartbox-turbo.dts | 226 +--------------------
...turbo.dts => mt7621_sercomm_dxx_nand_256m.dtsi} | 17 +-
2 files changed, 2 insertions(+), 241 deletions(-)
diff --git a/target/linux/ramips/dts/mt7621_beeline_smartbox-turbo.dts b/target/linux/ramips/dts/mt7621_beeline_smartbox-turbo.dts
index 733be13e13..df80f49e97 100644
--- a/target/linux/ramips/dts/mt7621_beeline_smartbox-turbo.dts
+++ b/target/linux/ramips/dts/mt7621_beeline_smartbox-turbo.dts
@@ -1,183 +1,14 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
+#include "mt7621_sercomm_dxx_nand_256m.dtsi"
/ {
compatible = "beeline,smartbox-turbo", "mediatek,mt7621-soc";
model = "Beeline SmartBox TURBO";
-
- aliases {
- label-mac-device = &gmac0;
-
- led-boot = &led_status_green;
- led-failsafe = &led_status_red;
- led-running = &led_status_green;
- led-upgrade = &led_status_red;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-1 {
- label = "blue:wan";
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_WAN;
- gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
- };
-
- led_status_green: led-0 {
- label = "green:status";
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
- };
-
- led_status_red: led-2 {
- label = "red:status";
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- ubi-concat {
- compatible = "mtd-concat";
- devices = <&ubiconcat0 &ubiconcat1 &ubiconcat2 \
- &ubiconcat3>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "ubi";
- reg = <0x0 0xca00000>;
- };
- };
- };
-};
-
-&nand {
- status = "okay";
-
- partitions {
- compatible = "sercomm,sc-partitions", "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "u-boot";
- reg = <0x0 0x100000>;
- sercomm,scpart-id = <0>;
- read-only;
- };
-
- partition at 100000 {
- label = "dynamic partition map";
- reg = <0x100000 0x100000>;
- sercomm,scpart-id = <1>;
- read-only;
- };
-
- factory: partition at 200000 {
- label = "Factory";
- reg = <0x200000 0x100000>;
- sercomm,scpart-id = <2>;
- read-only;
-
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_factory_21000: macaddr at 21000 {
- reg = <0x21000 0x6>;
- };
- };
-
- partition at 300000 {
- label = "Boot Flag";
- reg = <0x300000 0x100000>;
- sercomm,scpart-id = <3>;
- };
-
- partition at 400000 {
- label = "kernel";
- reg = <0x400000 0x600000>;
- sercomm,scpart-id = <4>;
- };
-
- partition at a00000 {
- label = "Kernel 2";
- reg = <0xa00000 0x600000>;
- sercomm,scpart-id = <5>;
- read-only;
- };
-
- ubiconcat0: partition at 1000000 {
- label = "File System 1";
- reg = <0x1000000 0x2000000>;
- sercomm,scpart-id = <6>;
- };
-
- partition at 3000000 {
- label = "File System 2";
- reg = <0x3000000 0x2000000>;
- sercomm,scpart-id = <7>;
- read-only;
- };
-
- ubiconcat1: partition at 5000000 {
- label = "Configuration/log";
- reg = <0x5000000 0x1400000>;
- sercomm,scpart-id = <8>;
- };
-
- ubiconcat2: partition at 6400000 {
- label = "Debug (Ftool)";
- reg = <0x6400000 0x1a00000>;
- sercomm,scpart-id = <9>;
- };
-
- ubiconcat3: partition at 8000000 {
- label = "container";
- reg = <0x8000000 0x7c00000>;
- sercomm,scpart-id = <10>;
- };
- };
-};
-
-&pcie {
- status = "okay";
};
&pcie0 {
wifi at 0,0 {
- compatible = "mediatek,mt76";
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
-
nvmem-cells = <&macaddr_factory_21000>;
nvmem-cell-names = "mac-address";
mac-address-increment = <(5)>;
@@ -186,69 +17,14 @@
&pcie1 {
wifi at 0,0 {
- compatible = "mediatek,mt76";
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x0>;
- ieee80211-freq-limit = <2400000 2500000>;
-
nvmem-cells = <&macaddr_factory_21000>;
nvmem-cell-names = "mac-address";
mac-address-increment = <(4)>;
};
};
-&gmac0 {
- nvmem-cells = <&macaddr_factory_21000>;
- nvmem-cell-names = "mac-address";
-};
-
&gmac1 {
- status = "okay";
- label = "wan";
- phy-handle = <ðphy0>;
-
nvmem-cells = <&macaddr_factory_21000>;
nvmem-cell-names = "mac-address";
mac-address-increment = <(1)>;
};
-
-&mdio {
- ethphy0: ethernet-phy at 0 {
- reg = <0>;
- };
-};
-
-&switch0 {
- ports {
- port at 1 {
- status = "okay";
- label = "lan1";
- };
-
- port at 2 {
- status = "okay";
- label = "lan2";
- };
-
- port at 3 {
- status = "okay";
- label = "lan3";
- };
-
- port at 4 {
- status = "okay";
- label = "lan4";
- };
- };
-};
-
-&uartlite3 {
- status = "okay";
-};
-
-&state_default {
- gpio {
- groups = "jtag", "uart2";
- function = "gpio";
- };
-};
diff --git a/target/linux/ramips/dts/mt7621_beeline_smartbox-turbo.dts b/target/linux/ramips/dts/mt7621_sercomm_dxx_nand_256m.dtsi
similarity index 89%
copy from target/linux/ramips/dts/mt7621_beeline_smartbox-turbo.dts
copy to target/linux/ramips/dts/mt7621_sercomm_dxx_nand_256m.dtsi
index 733be13e13..a0534bdabd 100644
--- a/target/linux/ramips/dts/mt7621_beeline_smartbox-turbo.dts
+++ b/target/linux/ramips/dts/mt7621_sercomm_dxx_nand_256m.dtsi
@@ -7,9 +7,6 @@
#include <dt-bindings/leds/common.h>
/ {
- compatible = "beeline,smartbox-turbo", "mediatek,mt7621-soc";
- model = "Beeline SmartBox TURBO";
-
aliases {
label-mac-device = &gmac0;
@@ -160,7 +157,7 @@
};
ubiconcat3: partition at 8000000 {
- label = "container";
+ label = "Container";
reg = <0x8000000 0x7c00000>;
sercomm,scpart-id = <10>;
};
@@ -177,10 +174,6 @@
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
-
- nvmem-cells = <&macaddr_factory_21000>;
- nvmem-cell-names = "mac-address";
- mac-address-increment = <(5)>;
};
};
@@ -190,10 +183,6 @@
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0>;
ieee80211-freq-limit = <2400000 2500000>;
-
- nvmem-cells = <&macaddr_factory_21000>;
- nvmem-cell-names = "mac-address";
- mac-address-increment = <(4)>;
};
};
@@ -206,10 +195,6 @@
status = "okay";
label = "wan";
phy-handle = <ðphy0>;
-
- nvmem-cells = <&macaddr_factory_21000>;
- nvmem-cell-names = "mac-address";
- mac-address-increment = <(1)>;
};
&mdio {
More information about the lede-commits
mailing list