[openwrt/openwrt] ath79: add support for MikroTik hAP (RB951Ui-2nD)

[LEDE Commits]

blocktrron pushed a commit to openwrt/openwrt.git, branch openwrt-22.03:
https://git.openwrt.org/34b6abf5a8f8751e377bae4978e38a0f2326bdae

commit 34b6abf5a8f8751e377bae4978e38a0f2326bdae
Author: Maciej Krüger <mkg20001 at gmail.com>
AuthorDate: Thu May 19 20:00:53 2022 +0200

    ath79: add support for MikroTik hAP (RB951Ui-2nD)
    
    The MikroTik hAP (product code RB951Ui-2nD) is
    an indoor 2.4Ghz AP with a 2 dBi integrated antenna built around the
    Atheros QCA9531 SoC.
    
    Specifications:
     - SoC: Atheros QCA9531
     - RAM: 64 MB
     - Storage: 16 MB NOR - Winbond 25Q128FVSG
     - Wireless: Atheros QCA9530 (SoC) 802.11b/g/n 2x2
     - Ethernet: Atheros AR934X switch, 5x 10/100 ports,
       10-28 V passive PoE in port 1, 500 mA PoE out on port 5
     - 8 user-controllable LEDs:
       · 1x power (green)
       · 1x user (green)
       · 4x LAN status (green)
       · 1x WAN status (green)
       · 1x PoE power status (red)
    
    See https://mikrotik.com/product/RB951Ui-2nD for more details.
    
    Notes:
     The device was already supported in the ar71xx target.
    
    Flashing:
     TFTP boot initramfs image and then perform sysupgrade. Follow common
     MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.
    
    Signed-off-by: Maciej Krüger <mkg20001 at gmail.com>
    (cherry picked from commit 5ce64e0646fcd5c4f374b4de898b591560c32e18)
---
 .../linux/ath79/dts/qca9531_mikrotik_routerboard-951ui-2nd.dts   | 8 ++++++++
 target/linux/ath79/image/mikrotik.mk                             | 9 +++++++++
 target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds       | 1 +
 target/linux/ath79/mikrotik/base-files/etc/board.d/02_network    | 1 +
 .../mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom   | 1 +
 .../mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 1 +
 6 files changed, 21 insertions(+)

diff --git a/target/linux/ath79/dts/qca9531_mikrotik_routerboard-951ui-2nd.dts b/target/linux/ath79/dts/qca9531_mikrotik_routerboard-951ui-2nd.dts
new file mode 100644
index 0000000000..dd9af40f47
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_mikrotik_routerboard-951ui-2nd.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_mikrotik_routerboard-95x.dtsi"
+
+/ {
+	compatible = "mikrotik,routerboard-951ui-2nd", "qca,qca9531";
+	model = "MikroTik RouterBOARD 951Ui-2nD (hAP)";
+};
diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk
index 869c466278..d8ae726e87 100644
--- a/target/linux/ath79/image/mikrotik.mk
+++ b/target/linux/ath79/image/mikrotik.mk
@@ -38,6 +38,15 @@ define Device/mikrotik_routerboard-922uags-5hpacd
 endef
 TARGET_DEVICES += mikrotik_routerboard-922uags-5hpacd
 
+define Device/mikrotik_routerboard-951ui-2nd
+  $(Device/mikrotik_nor)
+  SOC := qca9531
+  DEVICE_MODEL := RouterBOARD 951Ui-2nD (hAP)
+  IMAGE_SIZE := 16256k
+  SUPPORTED_DEVICES += rb-951ui-2nd
+endef
+TARGET_DEVICES += mikrotik_routerboard-951ui-2nd
+
 define Device/mikrotik_routerboard-952ui-5ac2nd
   $(Device/mikrotik_nor)
   SOC := qca9533
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
index baf6d00412..edb83b9baa 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
@@ -6,6 +6,7 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+mikrotik,routerboard-951ui-2nd|\
 mikrotik,routerboard-952ui-5ac2nd)
 	ucidef_set_led_netdev "port1" "port1" "green:port1" "eth1"
 	ucidef_set_led_switch "port2" "port2" "green:port2" "switch0" "0x10"
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
index 9417e839e4..b05a41ec36 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
@@ -24,6 +24,7 @@ ath79_setup_interfaces()
 	mikrotik,routerboard-wapr-2nd)
 		ucidef_set_interface_lan "eth0"
 		;;
+	mikrotik,routerboard-951ui-2nd|\
 	mikrotik,routerboard-952ui-5ac2nd)
 		ucidef_set_interface_wan "eth1"
 		ucidef_add_switch "switch0" \
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index b5651f15e8..0baed0665c 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -35,6 +35,7 @@ case "$FIRMWARE" in
 	mikrotik,routerboard-wap-g-5hact2hnd)
 		caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 2)
 		;;
+	mikrotik,routerboard-951ui-2nd|\
 	mikrotik,routerboard-952ui-5ac2nd)
 		caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 6)
 		;;
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 32fc4a6f6d..5b918d966c 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -12,6 +12,7 @@ case "$FIRMWARE" in
 "ath10k/cal-pci-0000:00:00.0.bin")
 	case $board in
 	mikrotik,routerboard-921gs-5hpacd-15s|\
+	mikrotik,routerboard-951ui-2nd|\
 	mikrotik,routerboard-952ui-5ac2nd|\
 	mikrotik,routerboard-962uigs-5hact2hnt|\
 	mikrotik,routerboard-wap-g-5hact2hnd)