[openwrt/openwrt] ramips: add support for YunCore AX820/HWAP-AX820

LEDE Commits lede-commits at lists.infradead.org
Tue May 17 14:30:11 PDT 2022


hauke pushed a commit to openwrt/openwrt.git, branch openwrt-22.03:
https://git.openwrt.org/d627ea510c36c2d2049bc062d236aea2c23bd636

commit d627ea510c36c2d2049bc062d236aea2c23bd636
Author: Clemens Hopfer <openwrt at wireloss.net>
AuthorDate: Thu Jul 22 17:54:15 2021 +0200

    ramips: add support for YunCore AX820/HWAP-AX820
    
    There are two versions which are identical apart from the enclosure:
      YunCore AX820: indoor ceiling mount AP with integrated antennas
      YunCore HWAP-AX820: outdoor enclosure with external (N) connectors
    
    Hardware specs:
      SoC: MediaTek MT7621DAT
      Flash: 16 MiB SPI NOR
      RAM: 128MiB (DDR3, integrated)
      WiFi: MT7905DAN+MT7975DN 2.4/5GHz 2T2R 802.11ax
      Ethernet: 10/100/1000 Mbps x2 (WAN/PoE+LAN)
      LED: Status (green)
      Button: Reset
      Power: 802.11af/at PoE; DC 12V,1A
      Antennas: AX820(indoor): 4dBi internal; HWAP-AX820(outdoor): external
    
    Flash instructions:
      The "OpenWRT support" version of the AX820 comes with a LEDE-based
      firmware with proprietary MTK drivers and a luci webinterface and
      ssh accessible under 192.168.1.1 on LAN; user root, no password.
      The sysupgrade.bin can be flashed using luci or sysupgrade via ssh,
      you will have to force the upgrade due to a different factory name.
      Remember: Do *not* preserve factory configuration!
    
    MAC addresses as used by OEM firmware:
      use   address            source
      2g    44:D1:FA:*:0b      Factory 0x0004 (label)
      5g    46:D1:FA:*:0b      LAA of 2g
      lan   44:D1:FA:*:0c      Factory 0xe000
      wan   44:D1:FA:*:0d      Factory 0xe000 + 1
    The wan MAC can also be found in 0xe006 but is not used by OEM dtb.
    
    Due to different MAC handling in mt76 the LAA derived from lan is used
    for 2g to prevent duplicate MACs when creating multiple interfaces.
    
    Signed-off-by: Clemens Hopfer <openwrt at wireloss.net>
    (cherry picked from commit 4891b865380e2b7f32acf0893df9c1ca9db8d4ea)
---
 package/boot/uboot-envtools/files/ramips           |   3 +-
 target/linux/ramips/dts/mt7621_yuncore_ax820.dts   | 145 +++++++++++++++++++++
 target/linux/ramips/image/mt7621.mk                |   9 ++
 .../mt7621/base-files/etc/board.d/02_network       |   4 +
 .../etc/hotplug.d/ieee80211/10_fix_wifi_mac        |   4 +
 5 files changed, 164 insertions(+), 1 deletion(-)

diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips
index 92118a6319..d97c812881 100644
--- a/package/boot/uboot-envtools/files/ramips
+++ b/package/boot/uboot-envtools/files/ramips
@@ -23,7 +23,8 @@ sitecom,wlr-4100-v1-002)
 	;;
 allnet,all0256n-4m|\
 allnet,all0256n-8m|\
-allnet,all5002)
+allnet,all5002|\
+yuncore,ax820)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
 	;;
 ampedwireless,ally-00x19k|\
diff --git a/target/linux/ramips/dts/mt7621_yuncore_ax820.dts b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts
new file mode 100644
index 0000000000..fe0e9daf7f
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "yuncore,ax820", "mediatek,mt7621-soc";
+	model = "YunCore AX820";
+
+	aliases {
+		led-boot = &led_status_green;
+		led-failsafe = &led_status_green;
+		led-running = &led_status_green;
+		led-upgrade = &led_status_green;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_green: status_green {
+			label = "green:status";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	watchdog {
+		compatible = "linux,wdt-gpio";
+		gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+		hw_algo = "toggle";
+		hw_margin_ms = <200>;
+		always-running;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash at 0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition at 0 {
+				label = "Bootloader";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition at 30000 {
+				label = "Config";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			/* range 0x40000 to 0x50000 is empty in vendor
+			 * firmware, so we do not use it either
+			 */
+
+			factory: partition at 50000 {
+				label = "Factory";
+				reg = <0x50000 0x40000>;
+				read-only;
+			};
+
+			partition at 90000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x90000 0xf70000>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie1 {
+	wifi at 0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x0>;
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&macaddr_factory_e000>;
+	nvmem-cell-names = "mac-address";
+};
+
+&switch0 {
+	ports {
+		port at 0 {
+			status = "okay";
+			label = "wan";
+			nvmem-cells = <&macaddr_factory_e000>;
+			nvmem-cell-names = "mac-address";
+			mac-address-increment = <1>;
+		};
+
+		port at 1 {
+			status = "okay";
+			label = "lan";
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "jtag", "wdt";
+		function = "gpio";
+	};
+};
+
+&factory {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_factory_e000: macaddr at e000 {
+		reg = <0xe000 0x6>;
+	};
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index e588168e40..bd0d6ad654 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -1953,6 +1953,15 @@ define Device/youku_yk-l2
 endef
 TARGET_DEVICES += youku_yk-l2
 
+define Device/yuncore_ax820
+  $(Device/dsa-migration)
+  IMAGE_SIZE := 15808k
+  DEVICE_VENDOR := YunCore
+  DEVICE_MODEL := AX820
+  DEVICE_PACKAGES := kmod-mt7915e
+endef
+TARGET_DEVICES += yuncore_ax820
+
 define Device/zbtlink_zbt-we1326
   $(Device/dsa-migration)
   $(Device/uimage-lzma-loader)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 1a914d8614..8e89ccacba 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -89,6 +89,7 @@ ramips_setup_interfaces()
 	ubnt,usw-flex)
 		ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5"
 		;;
+	yuncore,ax820|\
 	zyxel,nr7101)
 		ucidef_set_interfaces_lan_wan "lan" "wan"
 		;;
@@ -194,6 +195,9 @@ ramips_setup_macs()
 		wan_mac=$(mtd_get_mac_ascii Config protest_wan_mac)
 		label_mac=$lan_mac
 		;;
+	yuncore,ax820)
+		label_mac=$(mtd_get_mac_binary Factory 0x4)
+		;;
 	esac
 
 	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index f2f6390c76..504dfbc9ee 100644
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -79,4 +79,8 @@ case "$board" in
 		hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
 		[ "$PHYNBR" = "1" ] &&  macaddr_add $hw_mac_addr "0x100000" > /sys${DEVPATH}/macaddress
 		;;
+	yuncore,ax820)
+		[ "$PHYNBR" = "1" ] && \
+			macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress
+		;;
 esac




More information about the lede-commits mailing list