[openwrt/openwrt] ramips: create shared DTSI for Wavlink WN53XAX devices

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch openwrt-22.03:
https://git.openwrt.org/5454735574c6badc4718fb824d6d848918a63e0f

commit 5454735574c6badc4718fb824d6d848918a63e0f
Author: Davide Fioravanti <pantanastyle at gmail.com>
AuthorDate: Mon Apr 18 16:54:40 2022 +0200

    ramips: create shared DTSI for Wavlink WN53XAX devices
    
    Most of the definitions for WN531A6 will be shared with WN533A8 in a
    future commit, so put them in a shared DTSI.
    
    Signed-off-by: Davide Fioravanti <pantanastyle at gmail.com>
    (cherry picked from commit 57b6dcd826b13eab2101f9c8e96d43ab251e8dc1)
---
 .../linux/ramips/dts/mt7621_wavlink_wl-wn531a6.dts | 197 ++-------------------
 ...-wn531a6.dts => mt7621_wavlink_wl-wn53xax.dtsi} |  21 +--
 2 files changed, 19 insertions(+), 199 deletions(-)

diff --git a/target/linux/ramips/dts/mt7621_wavlink_wl-wn531a6.dts b/target/linux/ramips/dts/mt7621_wavlink_wl-wn531a6.dts
index f8c6bffb40..0d6c81cf62 100644
--- a/target/linux/ramips/dts/mt7621_wavlink_wl-wn531a6.dts
+++ b/target/linux/ramips/dts/mt7621_wavlink_wl-wn531a6.dts
@@ -1,203 +1,32 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7621_wavlink_wl-wn53xax.dtsi"
 
 / {
 	compatible = "wavlink,wl-wn531a6", "mediatek,mt7621-soc";
 	model = "Wavlink WL-WN531A6";
-
-	aliases {
-		led-boot = &led_status_red;
-		led-failsafe = &led_status_red;
-		led-running = &led_status_blue;
-		led-upgrade = &led_status_red;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "Reset Button";
-			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		touch { /* RH6015C touch sensor -> GPIO 14 */
-			label = "Touch Button";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		turbo {
-			label = "Turbo Button";
-			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_1>;
-		};
-
-		wps {
-			label = "WPS Button";
-			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_status_blue: status_blue {
-			label = "blue:power";
-			gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_status_red: status_red {
-			label = "red:power";
-			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-		};
-
-		wifi2g {
-			label = "blue:wifi2g";
-			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy0tpt";
-		};
-	};
-};
-
-&i2c {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	flash at 0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition at 0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition at 30000 {
-				label = "config";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			factory: partition at 40000 {
-				label = "factory";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-
-			partition at 50000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x50000 0xeb0000>;
-			};
-
-			partition at f00000 {
-				label = "vendor";
-				reg = <0xf00000 0x100000>;
-				read-only;
-			};
-		};
-	};
 };
 
-&pcie {
-	status = "okay";
+&wifi0{
+	ieee80211-freq-limit = <2400000 2500000>;
 };
 
-&pcie0 {
-	mt76 at 0,0 {
-		compatible = "mediatek,mt76";
-		reg = <0x0000 0 0 0 0>;
-		mediatek,mtd-eeprom = <&factory 0x0>;
-		ieee80211-freq-limit = <2400000 2500000>;
-	};
+&wifi1{
+	ieee80211-freq-limit = <5000000 6000000>;
 };
 
-&pcie1 {
-	mt76 at 0,0 {
-		compatible = "mediatek,mt76";
-		reg = <0x0000 0 0 0 0>;
-		mediatek,mtd-eeprom = <&factory 0x8000>;
-		ieee80211-freq-limit = <5000000 6000000>;
-	};
+&port0{
+	label = "lan1";
 };
 
-&ethernet {
-	pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
+&port1{
+	label = "lan2";
 };
 
-&gmac0 {
-	nvmem-cells = <&macaddr_factory_e000>;
-	nvmem-cell-names = "mac-address";
+&port2{
+	label = "lan3";
 };
 
-&switch0 {
-	ports {
-		port at 0 {
-			status = "okay";
-			label = "lan1";
-		};
-
-		port at 1 {
-			status = "okay";
-			label = "lan2";
-		};
-
-		port at 2 {
-			status = "okay";
-			label = "lan3";
-		};
-
-		port at 3 {
-			status = "okay";
-			label = "lan4";
-		};
-
-		port at 4 {
-			status = "okay";
-			label = "wan";
-			nvmem-cells = <&macaddr_factory_e006>;
-			nvmem-cell-names = "mac-address";
-		};
-	};
-};
-
-&state_default {
-	gpio {
-		groups = "rgmii2", "jtag", "wdt";
-		function = "gpio";
-	};
-};
-
-&uartlite2 {
-	status = "okay";
-};
-
-&factory {
-	compatible = "nvmem-cells";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	macaddr_factory_e000: macaddr at e000 {
-		reg = <0xe000 0x6>;
-	};
-
-	macaddr_factory_e006: macaddr at e006 {
-		reg = <0xe006 0x6>;
-	};
+&port3{
+	label = "lan4";
 };
diff --git a/target/linux/ramips/dts/mt7621_wavlink_wl-wn531a6.dts b/target/linux/ramips/dts/mt7621_wavlink_wl-wn53xax.dtsi
similarity index 90%
copy from target/linux/ramips/dts/mt7621_wavlink_wl-wn531a6.dts
copy to target/linux/ramips/dts/mt7621_wavlink_wl-wn53xax.dtsi
index f8c6bffb40..843e9a30c7 100644
--- a/target/linux/ramips/dts/mt7621_wavlink_wl-wn531a6.dts
+++ b/target/linux/ramips/dts/mt7621_wavlink_wl-wn53xax.dtsi
@@ -6,9 +6,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "wavlink,wl-wn531a6", "mediatek,mt7621-soc";
-	model = "Wavlink WL-WN531A6";
-
 	aliases {
 		led-boot = &led_status_red;
 		led-failsafe = &led_status_red;
@@ -120,20 +117,18 @@
 };
 
 &pcie0 {
-	mt76 at 0,0 {
+	wifi0: mt76 at 0,0 {
 		compatible = "mediatek,mt76";
 		reg = <0x0000 0 0 0 0>;
 		mediatek,mtd-eeprom = <&factory 0x0>;
-		ieee80211-freq-limit = <2400000 2500000>;
 	};
 };
 
 &pcie1 {
-	mt76 at 0,0 {
+	wifi1: mt76 at 0,0 {
 		compatible = "mediatek,mt76";
 		reg = <0x0000 0 0 0 0>;
 		mediatek,mtd-eeprom = <&factory 0x8000>;
-		ieee80211-freq-limit = <5000000 6000000>;
 	};
 };
 
@@ -148,24 +143,20 @@
 
 &switch0 {
 	ports {
-		port at 0 {
+		port0: port at 0 {
 			status = "okay";
-			label = "lan1";
 		};
 
-		port at 1 {
+		port1: port at 1 {
 			status = "okay";
-			label = "lan2";
 		};
 
-		port at 2 {
+		port2: port at 2 {
 			status = "okay";
-			label = "lan3";
 		};
 
-		port at 3 {
+		port3: port at 3 {
 			status = "okay";
-			label = "lan4";
 		};
 
 		port at 4 {