[openwrt/openwrt] ipq40xx: Lyra: update RGB LED-Controller node for 5.10+

[LEDE Commits]

chunkeey pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/834c9b3f055e5ea719f6adfb3fa979e32f2adbd0

commit 834c9b3f055e5ea719f6adfb3fa979e32f2adbd0
Author: Christian Lamparter <chunkeey at gmail.com>
AuthorDate: Sat May 7 19:41:55 2022 +0200

    ipq40xx: Lyra: update RGB LED-Controller node for 5.10+
    
    Add the reg and color property to each channel node. This
    update is to accommodate the multicolor framework.
    
    Refer to:
    <https://lore.kernel.org/all/20200622185919.2131-9-dmurphy@ti.com>
    <https://lore.kernel.org/all/20210818070209.1540451-1-michal.vokac@ysoft.com>
    
    Note:
    
    There is only a single extremely bright RGB-LED.
    The RGB-color channels (i.e.: blue-0, blue-1 and blue-2)
    are running in parallel to increase the current delivery
    beyond what a single PWM-output on the LED controller
    could do.
    
    BugLink: https://github.com/openwrt/openwrt/issues/9851
    Reported-By: Thomas Bøge <thomas at boegenielsen.dk>
    Tested-By: Thomas Bøge <thomas at boegenielsen.dk>
    Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
---
 .../base-files/etc/uci-defaults/04_led_migration   |   3 +
 .../arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts  | 122 +++++++++++++--------
 2 files changed, 78 insertions(+), 47 deletions(-)

diff --git a/target/linux/ipq40xx/base-files/etc/uci-defaults/04_led_migration b/target/linux/ipq40xx/base-files/etc/uci-defaults/04_led_migration
index ef4d3d037c..e8818a41ed 100644
--- a/target/linux/ipq40xx/base-files/etc/uci-defaults/04_led_migration
+++ b/target/linux/ipq40xx/base-files/etc/uci-defaults/04_led_migration
@@ -3,6 +3,9 @@
 board=$(board_name)
 
 case "$board" in
+asus,map-ac2200)
+	migrate_leds ':chan=-'
+	;;
 engenius,emr3500)
 	migrate_leds "emr3500:="
 	;;
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
index 3b9078bc08..433048dd4b 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
@@ -4,6 +4,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/soc/qcom,tcsr.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "ASUS Lyra MAP-AC2200";
@@ -252,69 +253,96 @@
 		/* 9-channel RGB LED controller */
 		compatible = "national,lp5523";
 		reg = <0x32>;
-		clock-mode = [01];
-
-		led_blue0: blue0 {
-			chan-name = "blue0";
-			label = "blue:chan0";
-			led-cur = [fa];
-			max-cur = [ff];
+		clock-mode = /bits/ 8 <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * There is only one single extremely bright RGB-LED.
+		 * The RGB-color channels are running in parallel to
+		 * increase the current delivery capabilities beyond
+		 * what a single PWM-output of the controller can do.
+		 */
+
+		led_blue0: led at 0 {
+			chan-name = "blue-0";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <0>;
+			color = <LED_COLOR_ID_BLUE>;
+			function-enumerator = <0>;
 		};
 
-		blue1 {
-			chan-name = "blue1";
-			label = "blue:chan1";
-			led-cur = [fa];
-			max-cur = [ff];
+		led at 1 {
+			chan-name = "blue-1";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <1>;
+			color = <LED_COLOR_ID_BLUE>;
+			function-enumerator = <1>;
 		};
 
-		blue2 {
-			chan-name = "blue2";
-			label = "blue:chan2";
-			led-cur = [fa];
-			max-cur = [ff];
+		led at 2 {
+			chan-name = "blue-2";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+			function-enumerator = <2>;
 		};
 
-		led_green0: green0 {
-			chan-name = "green0";
-			label = "green:chan0";
-			led-cur = [fa];
-			max-cur = [ff];
+		led_green0: led at 3 {
+			chan-name = "green-0";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <3>;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <0>;
 		};
 
-		green1 {
-			chan-name = "green1";
-			label = "green:chan1";
-			led-cur = [fa];
-			max-cur = [ff];
+		led at 4 {
+			chan-name = "green-1";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <1>;
 		};
 
-		green2 {
-			chan-name = "green2";
-			label = "green:chan2";
-			led-cur = [fa];
-			max-cur = [ff];
+		led at 5 {
+			chan-name = "green-2";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <5>;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <2>;
 		};
 
-		led_red0: red0 {
-			chan-name = "red0";
-			label = "red:chan0";
-			led-cur = [fa];
-			max-cur = [ff];
+		led_red0: led at 6 {
+			chan-name = "red-0";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <6>;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <0>;
 		};
 
-		red1 {
-			chan-name = "red1";
-			label = "red:chan1";
-			led-cur = [fa];
-			max-cur = [ff];
+		led at 7 {
+			chan-name = "red-1";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <1>;
 		};
 
-		red2 {
-			chan-name = "red2";
-			label = "red:chan2";
-			led-cur = [fa];
-			max-cur = [ff];
+		led at 8 {
+			chan-name = "red-2";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <8>;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <2>;
 		};
 	};
 };