[openwrt/openwrt] realtek: add support for ZyXEL GS1900-16

Sat May 7 08:25:37 PDT 2022

svanheule pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/580723e86ae53f14273ff8c3a0ebf5d15b4ce1f1

commit 580723e86ae53f14273ff8c3a0ebf5d15b4ce1f1
Author: Raylynn Knight <rayknight at me.com>
AuthorDate: Sun Apr 10 03:26:59 2022 -0400

    realtek: add support for ZyXEL GS1900-16
    
    The ZyXEL GS1900-16 is a 16 port gigabit switch similar to other GS1900 switches.
    
    Specifications
    --------------
    * Device:    ZyXEL GS1900-16
    * SoC:       Realtek RTL8382M 500 MHz MIPS 4KEc
    * Flash:     16 MiB Macronix MX25L12835F
    * RAM:       128 MiB DDR2 SDRAM Nanya NT5TU128M8HE
    * Ethernet:  16x 10/100/1000 Mbps
    * LEDs:      1 PWR LED (green, not configurable)
                 1 SYS LED (green, configurable)
                 16 ethernet port link/activity LEDs (green, SoC controlled)
    * Buttons:   1 "RESET" button on front panel
    * Power      120-240V AC C13
    * UART:      1 serial header (J12) with populated standard pin connector on
                 the right back of the PCB.
                 Pinout (front to back):
                 + Pin 1 - VCC marked with white dot
                 + Pin 2 - RX
                 + Pin 3 - TX
                 + PIn 4 - GND
    
    Serial connection parameters:  115200 8N1.
    
    Installation
    ------------
    
    OEM upgrade method:
    
    * Log in to OEM management web interface
    * Navigate to Maintenance > Firmware
    * Select the HTTP radio button
    * Select the Active radio button
    * Use the browse button to locate the
    realtek-generic-zyxel_gs1900-16-initramfs-kernel.bin
    file amd select open so File Path is update with filename.
    * Select the Apply button. Screen will display "Prepare
    for firmware upgrade ...".
    *Wait until screen shows "Do you really want to reboot?"
    then select the OK button
    * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it:
       > sysupgrade -n /tmp/realtek-generic-zyxel_gs1900-16-squashfs-sysupgrade.bin
       it may be necessary to restart the network (/etc/init.d/network restart) on
       the running initramfs image.
    
    U-Boot TFTP method:
    
    * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10).
    * Set up a TFTP server on your client and make it serve the initramfs image.
    * Connect serial, power up the switch, interrupt U-boot by hitting the
      space bar, and enable the network:
       > rtk network on
    * Since the GS1900-16 is a dual-partition device, you want to keep the OEM
      firmware on the backup partition for the time being. OpenWrt can only boot
      from the first partition anyway (hardcoded in the DTS). To make sure we are
      manipulating the first partition, issue the following commands:
      > setsys bootpartition 0
      > savesys
    * Download the image onto the device and boot from it:
       > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-16-initramfs-kernel.bin
       > bootm
    * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it:
       > sysupgrade -n /tmp/openwrt-realtek-generic-zyxel_gs1900-16-squashfs-sysupgrade.bin
       it may be necessary to restart the network (/etc/init.d/network restart) on
       the running initramfs image.
    
    Signed-off-by: Raylynn Knight <rayknight at me.com>
    [removed duplicate patch title, align RAM specification]
    Signed-off-by: Sander Vanheule <sander at svanheule.net>
---
 package/boot/uboot-envtools/files/realtek          |  1 +
 .../realtek/dts-5.10/rtl8382_zyxel_gs1900-16.dts   | 36 ++++++++++++++++++++++
 target/linux/realtek/image/rtl838x.mk              |  8 +++++
 3 files changed, 45 insertions(+)

diff --git a/package/boot/uboot-envtools/files/realtek b/package/boot/uboot-envtools/files/realtek
index c07175a357..99a73a6ab1 100644
--- a/package/boot/uboot-envtools/files/realtek
+++ b/package/boot/uboot-envtools/files/realtek
@@ -15,6 +15,7 @@ zyxel,gs1900-8|\
 zyxel,gs1900-8hp-v1|\
 zyxel,gs1900-8hp-v2|\
 zyxel,gs1900-10hp|\
+zyxel,gs1900-16|\
 zyxel,gs1900-24-v1|\
 zyxel,gs1900-24hp-v1|\
 zyxel,gs1900-24hp-v2)
diff --git a/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-16.dts b/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-16.dts
new file mode 100644
index 0000000000..ac2eea7015
--- /dev/null
+++ b/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-16.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "rtl8380_zyxel_gs1900.dtsi"
+
+/ {
+	compatible = "zyxel,gs1900-16", "realtek,rtl838x-soc";
+	model = "ZyXEL GS1900-16";
+};
+
+&mdio {
+	EXTERNAL_PHY(16)
+	EXTERNAL_PHY(17)
+	EXTERNAL_PHY(18)
+	EXTERNAL_PHY(19)
+	EXTERNAL_PHY(20)
+	EXTERNAL_PHY(21)
+	EXTERNAL_PHY(22)
+	EXTERNAL_PHY(23)
+};
+
+&switch0 {
+	ports {
+		SWITCH_PORT(16, 9, qsgmii)
+		SWITCH_PORT(17, 10, qsgmii)
+		SWITCH_PORT(18, 11, qsgmii)
+		SWITCH_PORT(19, 12, qsgmii)
+		SWITCH_PORT(20, 13, qsgmii)
+		SWITCH_PORT(21, 14, qsgmii)
+		SWITCH_PORT(22, 15, qsgmii)
+		SWITCH_PORT(23, 16, qsgmii)
+	};
+};
+
+&gpio1 {
+	/delete-node/ poe_enable;
+};
diff --git a/target/linux/realtek/image/rtl838x.mk b/target/linux/realtek/image/rtl838x.mk
index 29e7ff2695..e17dc8c62d 100644
--- a/target/linux/realtek/image/rtl838x.mk
+++ b/target/linux/realtek/image/rtl838x.mk
@@ -111,6 +111,14 @@ define Device/zyxel_gs1900-10hp
 endef
 TARGET_DEVICES += zyxel_gs1900-10hp
 
+define Device/zyxel_gs1900-16
+  $(Device/zyxel_gs1900)
+  SOC := rtl8382
+  DEVICE_MODEL := GS1900-16
+  ZYXEL_VERS := AAHJ
+endef
+TARGET_DEVICES += zyxel_gs1900-16
+
 define Device/zyxel_gs1900-8
   $(Device/zyxel_gs1900)
   DEVICE_MODEL := GS1900-8


