[openwrt/openwrt] bcm53xx: add support for Asus RT-AC88U

[LEDE Commits]

rmilecki pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/72b9b721d707b7f70109eb70b2a9f22449ceba08

commit 72b9b721d707b7f70109eb70b2a9f22449ceba08
Author: Arınç ÜNAL <arinc.unal at arinc9.com>
AuthorDate: Fri Nov 12 18:56:15 2021 +0800

    bcm53xx: add support for Asus RT-AC88U
    
    Asus RT-AC88U is an AC3100 router featuring 9 Ethernet ports over the
    integrated Broadcom and the external Realtek switch.
    
    Hardware info:
    * Processor: Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
    * Switch: BCM53012 in BCM4709C0KFEBG & external RTL8365MB
    * DDR3 RAM: 512 MB
    * Flash: 128 MB (ESMT F59L1G81LA-25T)
    * 2.4GHz: BCM4366 4×4 2.4/5G single chip 802.11ac SoC
    * 5GHz: BCM4366 4×4 2.4/5G single chip 802.11ac SoC
    * Ports: 8 Ports, 1 WAN Ports
    
    Flashing instructions:
    * Boot to CFE Recovery Mode by holding the reset button while power-on.
    * Connect to the router with an ethernet cable.
    * Set IPv4 address of the computer to 192.168.1.2 subnet 255.255.255.0.
    * Head to http://192.168.1.1.
    * Reset NVRAM.
    * Upload the OpenWrt image.
    
    CFE bootloader may reject flashing the image due to image integrity check.
    In that case, follow the instructions below.
    
    * Rename the OpenWrt image as firmware.trx.
    * Run a TFTP server and make it serve the firmware.trx file.
    * Run the URL below on a browser or curl.
      http://192.168.1.1/do.htm?cmd=flash+-noheader+192.168.1.2:firmware.trx+flash0.trx
    
    Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
    [rmilecki: mark BROKEN until we sort out nvram & CFE recovery]
    Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
 target/linux/bcm53xx/base-files/etc/board.d/02_network | 3 +++
 target/linux/bcm53xx/image/Makefile                    | 9 +++++++++
 2 files changed, 12 insertions(+)

diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network
index 6d970e1d0e..822320c0a6 100644
--- a/target/linux/bcm53xx/base-files/etc/board.d/02_network
+++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network
@@ -13,6 +13,9 @@ bcm53xx_setup_interfaces()
 	asus,rt-ac87u)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
 		;;
+	asus,rt-ac88u)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 extsw" "wan"
+		;;
 	linksys,panamera)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8 extsw" "wan"
 		;;
diff --git a/target/linux/bcm53xx/image/Makefile b/target/linux/bcm53xx/image/Makefile
index aadac9c3d4..3df24013ce 100644
--- a/target/linux/bcm53xx/image/Makefile
+++ b/target/linux/bcm53xx/image/Makefile
@@ -167,6 +167,15 @@ define Device/asus_rt-ac87u
 endef
 TARGET_DEVICES += asus_rt-ac87u
 
+define Device/asus_rt-ac88u
+  $(call Device/asus)
+  DEVICE_MODEL := RT-AC88U
+  DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
+  ASUS_PRODUCTID := RT-AC88U
+  BROKEN := y
+endef
+TARGET_DEVICES += asus_rt-ac88u
+
 define Device/asus_rt-n18u
   $(call Device/asus)
   DEVICE_MODEL := RT-N18U