[openwrt/openwrt] ath79: TP-Link EAP225-Wall v2: use pre-calibration nvmem-cell

[LEDE Commits]

svanheule pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/9a329668af0598c6e55834e61574c5087c577dcf

commit 9a329668af0598c6e55834e61574c5087c577dcf
Author: Sander Vanheule <sander at svanheule.net>
AuthorDate: Sat Jun 18 15:38:37 2022 +0200

    ath79: TP-Link EAP225-Wall v2: use pre-calibration nvmem-cell
    
    ath10k Wave-2 hardware requires an nvmem-cell called "pre-calibration"
    to load the device specific caldata, not "calibration". Rename the nvmem
    cell node and label to match the updated cell name.
    
    Fixes: 48625a04453b ("ath79: TP-Link EAP225-Wall v1: convert radios to nvmem-cells")
    Signed-off-by: Sander Vanheule <sander at svanheule.net>
---
 target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts b/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts
index 30c9441f12..439549d142 100644
--- a/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts
+++ b/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts
@@ -65,8 +65,8 @@
 
 		mac-address-increment = <1>;
 
-		nvmem-cells = <&macaddr_info_8>, <&calibration_ath10k>;
-		nvmem-cell-names = "mac-address", "calibration";
+		nvmem-cells = <&macaddr_info_8>, <&precalibration_ath10k>;
+		nvmem-cell-names = "mac-address", "pre-calibration";
 	};
 };
 
@@ -140,7 +140,7 @@
 					reg = <0x1000 0x440>;
 				};
 
-				calibration_ath10k: calibration at 5000 {
+				precalibration_ath10k: pre-calibration at 5000 {
 					reg = <0x5000 0x2f20>;
 				};
 			};