[openwrt/openwrt] ath79: TP-Link EAP245 v3: use pre-calibration nvmem-cell

[LEDE Commits]

svanheule pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/2d3321619b2b0a1eaabec3f47353e4e0aee3dc31

commit 2d3321619b2b0a1eaabec3f47353e4e0aee3dc31
Author: Sander Vanheule <sander at svanheule.net>
AuthorDate: Sat Jun 18 09:04:54 2022 +0200

    ath79: TP-Link EAP245 v3: use pre-calibration nvmem-cell
    
    ath10k Wave-2 hardware requires an nvmem-cell called "pre-calibration"
    to load the device specific caldata, not "calibration".
    
    Update the nvmem-cell name to make the 5GHz radio work again.
    
    Fixes: d4b3b2394233 ("ath79: TP-Link EAP245 v3: convert radios to nvmem-cells")
    Signed-off-by: Sander Vanheule <sander at svanheule.net>
---
 target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts b/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts
index 6819d2d822..ab5bc7b1a9 100644
--- a/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts
+++ b/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts
@@ -54,7 +54,7 @@
 		mac-address-increment = <1>;
 
 		nvmem-cells = <&macaddr_info_8>, <&calibration_ath10k>;
-		nvmem-cell-names = "mac-address", "calibration";
+		nvmem-cell-names = "mac-address", "pre-calibration";
 	};
 };