[openwrt/openwrt] realtek: add support for power LED on Netgear GS308Tv1

[LEDE Commits]

svanheule pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/c4927747d25af59db8233a66a59fdf9e8c0e395d

commit c4927747d25af59db8233a66a59fdf9e8c0e395d
Author: Andreas Böhler <dev at aboehler.at>
AuthorDate: Thu Jun 16 00:50:28 2022 +0200

    realtek: add support for power LED on Netgear GS308Tv1
    
    The Netgear GS308Tv1 is already supported by OpenWrt, but is missing LED
    support. After OpenWrt installation, all LEDs are off which makes the
    installation quite confusing.
    This enables support for the green/amber power LED to give feedback
    about the current status.
    
    Signed-off-by: Andreas Böhler <dev at aboehler.at>
---
 .../realtek/dts-5.10/rtl8380_netgear_gs308t-v1.dts | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs308t-v1.dts b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs308t-v1.dts
index 016ed8beb6..cd69e80186 100644
--- a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs308t-v1.dts
+++ b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs308t-v1.dts
@@ -2,7 +2,34 @@
 
 #include "rtl8380_netgear_gigabit_3xx.dtsi"
 
+#include <dt-bindings/leds/common.h>
+
 / {
 	compatible = "netgear,gs308t-v1", "realtek,rtl838x-soc";
 	model = "Netgear GS308T v1";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_amber;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_amber;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power_amber: led-0 {
+			label = "amber:power";
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio1 32 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_green: led-1 {
+			label = "green:power";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+		};
+	};
 };