[openwrt/openwrt] ath79: TP-Link EAP245 v1: convert ath10k to nvmem-cells

[LEDE Commits]

svanheule pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/d61882783d528ff51890427fbefeade58056a954

commit d61882783d528ff51890427fbefeade58056a954
Author: Sander Vanheule <sander at svanheule.net>
AuthorDate: Sat Jun 4 17:27:51 2022 +0200

    ath79: TP-Link EAP245 v1: convert ath10k to nvmem-cells
    
    Add the PCIe node for the ath10k radio to the devicetree, and refer to
    the art partition for the calibration data using nvmem-cells.
    
    Use mac-address-increment to ensure the MAC address is set correctly,
    and remove the device from the caldata extraction and patching script.
    
    Signed-off-by: Sander Vanheule <sander at svanheule.net>
---
 target/linux/ath79/dts/qca9563_tplink_eap245-v1.dts    | 18 ++++++++++++++++++
 .../etc/hotplug.d/firmware/11-ath10k-caldata           |  1 -
 2 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/target/linux/ath79/dts/qca9563_tplink_eap245-v1.dts b/target/linux/ath79/dts/qca9563_tplink_eap245-v1.dts
index 3da450192c..188326fd80 100644
--- a/target/linux/ath79/dts/qca9563_tplink_eap245-v1.dts
+++ b/target/linux/ath79/dts/qca9563_tplink_eap245-v1.dts
@@ -42,3 +42,21 @@
 		};
 	};
 };
+
+&art {
+	calibration_ath10k: calibration at 5000 {
+		reg = <0x5000 0x844>;
+	};
+};
+
+&pcie {
+	wifi at 0,0 {
+		compatible = "qcom,ath10k";
+		reg = <0 0 0 0 0>;
+
+		mac-address-increment = <1>;
+
+		nvmem-cells = <&macaddr_info_8>, <&calibration_ath10k>;
+		nvmem-cell-names = "mac-address", "calibration";
+	};
+};
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 668fd76af3..650d444fe6 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -146,7 +146,6 @@ case "$FIRMWARE" in
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfs 0xf100) 2)
 		;;
 	tplink,eap225-v1|\
-	tplink,eap245-v1|\
 	tplink,re450-v2|\
 	tplink,re450-v3|\
 	tplink,re455-v1)