[openwrt/openwrt] ramips: create new dtsi for Arcadyan routers

[LEDE Commits]

981213 pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/5b59137a162c07738abbe9fd37125193b3107cb7

commit 5b59137a162c07738abbe9fd37125193b3107cb7
Author: Mikhail Zhilkin <csharper2005 at gmail.com>
AuthorDate: Wed May 4 15:07:28 2022 +0000

    ramips: create new dtsi for Arcadyan routers
    
    This commit moves common properties for the boards below to a new dtsi:
    Beeline Smartbox Flash (Arcadyan WG443223)
    MTS WG430223 (Arcadyan WG430223)
    
    The boards are almost the same. Here is the differences:
    +------+----------+----------+
    |      | WG430223 | WG443223 |
    +------+----------+----------+
    | RAM  | 128      | 256      |
    +------+----------+----------+
    | USB  | -        | 1x3.0    |
    +------+----------+----------+
    | LEDS | RG       | RGB      |
    +------+----------+----------+
    
    Signed-off-by: Mikhail Zhilkin <csharper2005 at gmail.com>
---
 ...box-flash.dts => mt7621_arcadyan_wg4xx223.dtsi} |  16 +-
 .../ramips/dts/mt7621_beeline_smartbox-flash.dts   | 187 +--------------------
 2 files changed, 7 insertions(+), 196 deletions(-)

diff --git a/target/linux/ramips/dts/mt7621_beeline_smartbox-flash.dts b/target/linux/ramips/dts/mt7621_arcadyan_wg4xx223.dtsi
similarity index 92%
copy from target/linux/ramips/dts/mt7621_beeline_smartbox-flash.dts
copy to target/linux/ramips/dts/mt7621_arcadyan_wg4xx223.dtsi
index 45feb13756..5a845c4e9b 100644
--- a/target/linux/ramips/dts/mt7621_beeline_smartbox-flash.dts
+++ b/target/linux/ramips/dts/mt7621_arcadyan_wg4xx223.dtsi
@@ -7,9 +7,6 @@
 #include <dt-bindings/leds/common.h>
 
 / {
-	compatible = "beeline,smartbox-flash", "mediatek,mt7621-soc";
-	model = "Beeline SmartBox Flash";
-
 	aliases {
 		led-boot = &led_status_red;
 		led-failsafe = &led_status_red;
@@ -20,13 +17,6 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led-0 {
-			label = "blue:wan";
-			color = <LED_COLOR_ID_BLUE>;
-			function = LED_FUNCTION_WAN;
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		};
-
 		led_status_green: led-1 {
 			label = "green:status";
 			color = <LED_COLOR_ID_GREEN>;
@@ -97,6 +87,12 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			/* We keep the block below to prevent eth0 MAC
+			 * from randomization. Unique WAN, LAN, WLAN MACs
+			 * are stored in u-boot-env.
+			 */
+
+			/* Default Ralink MAC (00:0c:43:28:80:xx) */
 			macaddr_factory_fff0: macaddr at fff0 {
 				reg = <0xfff0 0x6>;
 			};
diff --git a/target/linux/ramips/dts/mt7621_beeline_smartbox-flash.dts b/target/linux/ramips/dts/mt7621_beeline_smartbox-flash.dts
index 45feb13756..d373a801d2 100644
--- a/target/linux/ramips/dts/mt7621_beeline_smartbox-flash.dts
+++ b/target/linux/ramips/dts/mt7621_beeline_smartbox-flash.dts
@@ -1,202 +1,17 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
+#include "mt7621_arcadyan_wg4xx223.dtsi"
 
 / {
 	compatible = "beeline,smartbox-flash", "mediatek,mt7621-soc";
 	model = "Beeline SmartBox Flash";
 
-	aliases {
-		led-boot = &led_status_red;
-		led-failsafe = &led_status_red;
-		led-running = &led_status_green;
-		led-upgrade = &led_status_red;
-	};
-
 	leds {
-		compatible = "gpio-leds";
-
 		led-0 {
 			label = "blue:wan";
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_WAN;
 			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 		};
-
-		led_status_green: led-1 {
-			label = "green:status";
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-		};
-
-		led_status_red: led-2 {
-			label = "red:status";
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	ubi-concat {
-		compatible = "mtd-concat";
-		devices = <&ubiconcat0 &ubiconcat1>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition at 0 {
-				label = "ubi";
-				reg = <0x0 0x5240000>;
-			};
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition at 0 {
-			label = "u-boot";
-			reg = <0x0 0x100000>;
-			read-only;
-		};
-
-		partition at 100000 {
-			label = "u-boot-env";
-			reg = <0x100000 0x100000>;
-		};
-
-		factory: partition at 200000 {
-			label = "Factory";
-			reg = <0x200000 0x100000>;
-			read-only;
-
-			compatible = "nvmem-cells";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			macaddr_factory_fff0: macaddr at fff0 {
-				reg = <0xfff0 0x6>;
-			};
-		};
-
-		partition at 300000 {
-			label = "firmware";
-			reg = <0x300000 0x2000000>;
-
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition at 0 {
-				label = "kernel";
-				reg = <0x0 0x440000>;
-			};
-
-			ubiconcat0: partition at 400000 {
-				label = "ubiconcat0";
-				reg = <0x440000 0x1bc0000>;
-			};
-		};
-
-		partition at 2300000 {
-			label = "Firmware2";
-			reg = <0x2300000 0x2000000>;
-			read-only;
-		};
-
-		partition at 4300000 {
-			label = "glbcfg";
-			reg = <0x4300000 0x200000>;
-			read-only;
-		};
-
-		partition at 4500000 {
-			label = "board_data";
-			reg = <0x4500000 0x100000>;
-			read-only;
-		};
-
-		partition at 4600000 {
-			label = "glbcfg2";
-			reg = <0x4600000 0x200000>;
-			read-only;
-		};
-
-		partition at 4800000 {
-			label = "board_data2";
-			reg = <0x4800000 0x100000>;
-			read-only;
-		};
-
-		ubiconcat1: partition at 4900000 {
-			label = "ubiconcat1";
-			reg = <0x4900000 0x3680000>;
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pcie0 {
-	wifi at 0,0 {
-		compatible = "mediatek,mt76";
-		reg = <0x0000 0 0 0 0>;
-		mediatek,mtd-eeprom = <&factory 0x0>;
-	};
-};
-
-&gmac0 {
-	nvmem-cells = <&macaddr_factory_fff0>;
-	nvmem-cell-names = "mac-address";
-};
-
-&switch0 {
-	ports {
-		port at 2 {
-			status = "okay";
-			label = "lan2";
-		};
-
-		port at 3 {
-			status = "okay";
-			label = "lan1";
-		};
-
-		port at 4 {
-			status = "okay";
-			label = "wan";
-		};
-	};
-};
-
-&state_default {
-	gpio {
-		groups = "i2c", "jtag";
-		function = "gpio";
 	};
 };