[openwrt/openwrt] realtek: rtl83xx-phy: decouple RTL8214FC media change and power config
LEDE Commits
lede-commits at lists.infradead.org
Thu Jul 28 05:11:32 PDT 2022
dangole pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/c6a7ea9f7f49fb805af54e586941f066e0a8786d
commit c6a7ea9f7f49fb805af54e586941f066e0a8786d
Author: Jan Hoffmann <jan at 3e8.eu>
AuthorDate: Sat Jul 23 22:53:14 2022 +0200
realtek: rtl83xx-phy: decouple RTL8214FC media change and power config
Move RTL8214FC power configuration to newly created suspend and resume
methods. A media change now only results in power configuration if the
PHY is not suspended, to avoid powering up a port when the interface is
currently not up.
While at it, remove the rtl8380 prefix from function names, as this is
actually not SoC-specific.
Tested-by: Birger Koblitz <mail at birger-koblitz.de>
Signed-off-by: Jan Hoffmann <jan at 3e8.eu>
---
.../files-5.10/drivers/net/phy/rtl83xx-phy.c | 122 ++++++++++++---------
1 file changed, 70 insertions(+), 52 deletions(-)
diff --git a/target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.c b/target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.c
index 2523894891..70b57924b9 100644
--- a/target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.c
+++ b/target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.c
@@ -934,78 +934,96 @@ static int rtl8218b_ext_match_phy_device(struct phy_device *phydev)
return phydev->phy_id == PHY_ID_RTL8218B_E;
}
-static void rtl8380_rtl8214fc_media_set(struct phy_device *phydev, bool set_fibre)
+static bool rtl8214fc_media_is_fibre(struct phy_device *phydev)
{
int mac = phydev->mdio.addr;
static int reg[] = {16, 19, 20, 21};
- int val, media, power;
+ u32 val;
- pr_info("%s: port %d, set_fibre: %d\n", __func__, mac, set_fibre);
phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
val = phy_package_read_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4]);
+ phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
- media = (val >> 10) & 0x3;
- pr_info("Current media %x\n", media);
- if (media & 0x2) {
- pr_info("Powering off COPPER\n");
- phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
- /* Ensure power is off */
- power = phy_read_paged(phydev, RTL821X_PAGE_POWER, 0x10);
- if (!(power & (1 << 11)))
- phy_write_paged(phydev, RTL821X_PAGE_POWER, 0x10, power | (1 << 11));
- } else {
- pr_info("Powering off FIBRE\n");
+ if (val & BIT(11))
+ return false;
+
+ return true;
+}
+
+static void rtl8214fc_power_set(struct phy_device *phydev, int port, bool on)
+{
+ char *state = on ? "on" : "off";
+
+ if (port == PORT_FIBRE) {
+ pr_info("%s: Powering %s FIBRE (port %d)\n", __func__, state, phydev->mdio.addr);
phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE);
- /* Ensure power is off */
- power = phy_read_paged(phydev, RTL821X_PAGE_POWER, 0x10);
- if (!(power & (1 << 11)))
- phy_write_paged(phydev, RTL821X_PAGE_POWER, 0x10, power | (1 << 11));
+ } else {
+ pr_info("%s: Powering %s COPPER (port %d)\n", __func__, state, phydev->mdio.addr);
+ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
}
- phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
- if (set_fibre) {
- val |= 1 << 10;
- val &= ~(1 << 11);
+ if (on) {
+ phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, BIT(11), 0);
} else {
- val |= 1 << 10;
- val |= 1 << 11;
+ phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, 0, BIT(11));
}
- phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
- phy_package_write_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4], val);
- phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
- if (set_fibre) {
- pr_info("Powering on FIBRE\n");
- phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE);
- /* Ensure power is off */
- power = phy_read_paged(phydev, RTL821X_PAGE_POWER, 0x10);
- if (power & (1 << 11))
- phy_write_paged(phydev, RTL821X_PAGE_POWER, 0x10, power & ~(1 << 11));
+ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
+}
+
+static int rtl8214fc_suspend(struct phy_device *phydev)
+{
+ rtl8214fc_power_set(phydev, PORT_MII, false);
+ rtl8214fc_power_set(phydev, PORT_FIBRE, false);
+
+ return 0;
+}
+
+static int rtl8214fc_resume(struct phy_device *phydev)
+{
+ if (rtl8214fc_media_is_fibre(phydev)) {
+ rtl8214fc_power_set(phydev, PORT_MII, false);
+ rtl8214fc_power_set(phydev, PORT_FIBRE, true);
} else {
- pr_info("Powering on COPPER\n");
- phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
- /* Ensure power is off */
- power = phy_read_paged(phydev, RTL821X_PAGE_POWER, 0x10);
- if (power & (1 << 11))
- phy_write_paged(phydev, RTL821X_PAGE_POWER, 0x10, power & ~(1 << 11));
+ rtl8214fc_power_set(phydev, PORT_FIBRE, false);
+ rtl8214fc_power_set(phydev, PORT_MII, true);
}
- phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
+
+ return 0;
}
-static bool rtl8380_rtl8214fc_media_is_fibre(struct phy_device *phydev)
+static void rtl8214fc_media_set(struct phy_device *phydev, bool set_fibre)
{
int mac = phydev->mdio.addr;
static int reg[] = {16, 19, 20, 21};
- u32 val;
+ int val;
+ pr_info("%s: port %d, set_fibre: %d\n", __func__, mac, set_fibre);
phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
val = phy_package_read_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4]);
+
+ val |= BIT(10);
+ if (set_fibre) {
+ val &= ~BIT(11);
+ } else {
+ val |= BIT(11);
+ }
+
+ phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
+ phy_package_write_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4], val);
phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
- if (val & (1 << 11))
- return false;
- return true;
+
+ if (!phydev->suspended) {
+ if (set_fibre) {
+ rtl8214fc_power_set(phydev, PORT_MII, false);
+ rtl8214fc_power_set(phydev, PORT_FIBRE, true);
+ } else {
+ rtl8214fc_power_set(phydev, PORT_FIBRE, false);
+ rtl8214fc_power_set(phydev, PORT_MII, true);
+ }
+ }
}
static int rtl8214fc_set_port(struct phy_device *phydev, int port)
@@ -1015,7 +1033,7 @@ static int rtl8214fc_set_port(struct phy_device *phydev, int port)
pr_debug("%s port %d to %d\n", __func__, addr, port);
- rtl8380_rtl8214fc_media_set(phydev, is_fibre);
+ rtl8214fc_media_set(phydev, is_fibre);
return 0;
}
@@ -1024,7 +1042,7 @@ static int rtl8214fc_get_port(struct phy_device *phydev)
int addr = phydev->mdio.addr;
pr_debug("%s: port %d\n", __func__, addr);
- if (rtl8380_rtl8214fc_media_is_fibre(phydev))
+ if (rtl8214fc_media_is_fibre(phydev))
return PORT_FIBRE;
return PORT_MII;
}
@@ -1131,7 +1149,7 @@ static int rtl8214fc_set_eee(struct phy_device *phydev,
pr_debug("In %s port %d, enabled %d\n", __func__, port, e->eee_enabled);
- if (rtl8380_rtl8214fc_media_is_fibre(phydev)) {
+ if (rtl8214fc_media_is_fibre(phydev)) {
netdev_err(phydev->attached_dev, "Port %d configured for FIBRE", port);
return -ENOTSUPP;
}
@@ -1184,7 +1202,7 @@ static int rtl8214fc_get_eee(struct phy_device *phydev,
int addr = phydev->mdio.addr;
pr_debug("In %s port %d, enabled %d\n", __func__, addr, e->eee_enabled);
- if (rtl8380_rtl8214fc_media_is_fibre(phydev)) {
+ if (rtl8214fc_media_is_fibre(phydev)) {
netdev_err(phydev->attached_dev, "Port %d configured for FIBRE", addr);
return -ENOTSUPP;
}
@@ -3842,8 +3860,8 @@ static struct phy_driver rtl83xx_phy_driver[] = {
.flags = PHY_HAS_REALTEK_PAGES,
.match_phy_device = rtl8214fc_match_phy_device,
.probe = rtl8214fc_phy_probe,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = rtl8214fc_suspend,
+ .resume = rtl8214fc_resume,
.set_loopback = genphy_loopback,
.set_port = rtl8214fc_set_port,
.get_port = rtl8214fc_get_port,
More information about the lede-commits
mailing list