[openwrt/openwrt] lantiq: fix network port GPIO settings for Fritzbox 3390

LEDE Commits lede-commits at lists.infradead.org
Fri Jul 22 13:24:39 PDT 2022


chunkeey pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/0f301b0b1d7ca4b5fe290a72f0434525405f5a26

commit 0f301b0b1d7ca4b5fe290a72f0434525405f5a26
Author: Daniel Kestrel <kestrel1974 at t-online.de>
AuthorDate: Fri Jul 22 21:01:49 2022 +0200

    lantiq: fix network port GPIO settings for Fritzbox 3390
    
    There are forum reports that 2 LAN ports are not working, the
    GPIO settings are adjusted to fix the problem.
    
    Signed-off-by: Daniel Kestrel <kestrel1974 at t-online.de>
---
 .../lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts      | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts
index 17be2729f9..5a3f2e5836 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts
@@ -149,12 +149,12 @@
 &gswip_mdio {
 	phy0: ethernet-phy at 0 {
 		reg = <0x0>;
-		gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
 	};
 
 	phy1: ethernet-phy at 1 {
 		reg = <0x1>;
-		gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
 	};
 
 	phy11: ethernet-phy at 11 {




More information about the lede-commits mailing list