[openwrt/openwrt] ipq806x: Archer VR2600: fix switch ports numbering

[LEDE Commits]

chunkeey pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/69ea671320c936e72f554348475eeebcab383b42

commit 69ea671320c936e72f554348475eeebcab383b42
Author: Christian Lamparter <chunkeey at gmail.com>
AuthorDate: Tue Jul 19 19:46:38 2022 +0200

    ipq806x: Archer VR2600: fix switch ports numbering
    
    The order of LAN ports shown in Luci is reversed compared to what is
    written on the case of the device.  Fix the order so that they match.
    
    Fixes: #10275
    Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
---
 target/linux/ipq806x/base-files/etc/board.d/02_network | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index dc9c11e4ba..dbff854731 100644
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -27,8 +27,7 @@ compex,wpq864 |\
 netgear,d7800 |\
 netgear,r7500 |\
 netgear,r7500v2 |\
-qcom,ipq8064-ap148 |\
-tplink,vr2600v)
+qcom,ipq8064-ap148)
 	ucidef_add_switch "switch0" \
 		"1:lan" "2:lan" "3:lan" "4:lan" "6 at eth1" "5:wan" "0 at eth0"
 	;;
@@ -61,7 +60,8 @@ nec,wg2600hp3)
 	;;
 netgear,r7800 |\
 netgear,xr500 |\
-tplink,c2600)
+tplink,c2600 |\
+tplink,vr2600v)
 	ucidef_add_switch "switch0" \
 		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6 at eth1" "5:wan" "0 at eth0"
 	;;