[openwrt/openwrt] realtek: correct egress frame port verification
LEDE Commits
lede-commits at lists.infradead.org
Sun Jul 17 01:09:33 PDT 2022
svanheule pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/1773264a0c6da099af7f36046f95f0126d6de1eb
commit 1773264a0c6da099af7f36046f95f0126d6de1eb
Author: Sander Vanheule <sander at svanheule.net>
AuthorDate: Sun Jun 19 10:29:35 2022 +0200
realtek: correct egress frame port verification
Destination switch ports for outgoing frame can range from 0 to
CPU_PORT-1.
Refactor the code to only generate egress frame CPU headers when a valid
destination port number is available, and make the code a bit more
consistent between different switch generations. Change the dest_port
argument's type to 'unsigned int', since only positive values are valid.
This fixes the issue where egress frames on switch port 0 did not
receive a VLAN tag, because they are sent out without a CPU header.
Also fixes a potential issue with invalid (negative) egress port numbers
on RTL93xx switches.
Reported-by: Arınç ÜNAL <arinc.unal at xeront.com>
Suggested-by: Birger Koblitz <mail at birger-koblitz.de>
Tested-by: Luiz Angelo Daros de Luca <luizluca at gmail.com>
Signed-off-by: Sander Vanheule <sander at svanheule.net>
---
.../files-5.10/drivers/net/ethernet/rtl838x_eth.c | 73 +++++++++++-----------
.../files-5.10/drivers/net/ethernet/rtl838x_eth.h | 2 +-
2 files changed, 36 insertions(+), 39 deletions(-)
diff --git a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c
index 1de420dea1..0eee06d803 100644
--- a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c
+++ b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c
@@ -92,47 +92,42 @@ struct notify_b {
u32 reserved2[8];
};
-static void rtl838x_create_tx_header(struct p_hdr *h, int dest_port, int prio)
+static void rtl838x_create_tx_header(struct p_hdr *h, unsigned int dest_port, int prio)
{
- if (dest_port > 0) {
- // cpu_tag[0] is reserved on the RTL83XX SoCs
- h->cpu_tag[1] = 0x0401; // BIT 10: RTL8380_CPU_TAG, BIT0: L2LEARNING on
- h->cpu_tag[2] = 0x0200; // Set only AS_DPM, to enable DPM settings below
- h->cpu_tag[3] = 0x0000;
- h->cpu_tag[4] = BIT(dest_port) >> 16;
- h->cpu_tag[5] = BIT(dest_port) & 0xffff;
+ // cpu_tag[0] is reserved on the RTL83XX SoCs
+ h->cpu_tag[1] = 0x0401; // BIT 10: RTL8380_CPU_TAG, BIT0: L2LEARNING on
+ h->cpu_tag[2] = 0x0200; // Set only AS_DPM, to enable DPM settings below
+ h->cpu_tag[3] = 0x0000;
+ h->cpu_tag[4] = BIT(dest_port) >> 16;
+ h->cpu_tag[5] = BIT(dest_port) & 0xffff;
- /* Set internal priority (PRI) and enable (AS_PRI) */
- if (prio >= 0)
- h->cpu_tag[2] |= ((prio & 0x7) | BIT(3)) << 12;
- }
+ /* Set internal priority (PRI) and enable (AS_PRI) */
+ if (prio >= 0)
+ h->cpu_tag[2] |= ((prio & 0x7) | BIT(3)) << 12;
}
-static void rtl839x_create_tx_header(struct p_hdr *h, int dest_port, int prio)
+static void rtl839x_create_tx_header(struct p_hdr *h, unsigned int dest_port, int prio)
{
- if (dest_port > 0) {
- // cpu_tag[0] is reserved on the RTL83XX SoCs
- h->cpu_tag[1] = 0x0100; // RTL8390_CPU_TAG marker
- h->cpu_tag[2] = h->cpu_tag[3] = h->cpu_tag[4] = h->cpu_tag[5] = 0;
- // h->cpu_tag[1] |= BIT(1) | BIT(0); // Bypass filter 1/2
- if (dest_port >= 32) {
- dest_port -= 32;
- h->cpu_tag[2] = BIT(dest_port) >> 16;
- h->cpu_tag[3] = BIT(dest_port) & 0xffff;
- } else {
- h->cpu_tag[4] = BIT(dest_port) >> 16;
- h->cpu_tag[5] = BIT(dest_port) & 0xffff;
- }
- h->cpu_tag[2] |= BIT(4); // Enable destination port mask use
- h->cpu_tag[2] |= BIT(7); // Enable L2 Learning
-
- /* Set internal priority (PRI) and enable (AS_PRI) */
- if (prio >= 0)
- h->cpu_tag[2] |= ((prio & 0x7) | BIT(3)) << 8;
+ // cpu_tag[0] is reserved on the RTL83XX SoCs
+ h->cpu_tag[1] = 0x0100; // RTL8390_CPU_TAG marker
+ h->cpu_tag[2] = BIT(4) | BIT(7); /* AS_DPM (4) and L2LEARNING (7) flags */
+ h->cpu_tag[3] = h->cpu_tag[4] = h->cpu_tag[5] = 0;
+ // h->cpu_tag[1] |= BIT(1) | BIT(0); // Bypass filter 1/2
+ if (dest_port >= 32) {
+ dest_port -= 32;
+ h->cpu_tag[2] = BIT(dest_port) >> 16;
+ h->cpu_tag[3] = BIT(dest_port) & 0xffff;
+ } else {
+ h->cpu_tag[4] = BIT(dest_port) >> 16;
+ h->cpu_tag[5] = BIT(dest_port) & 0xffff;
}
+
+ /* Set internal priority (PRI) and enable (AS_PRI) */
+ if (prio >= 0)
+ h->cpu_tag[2] |= ((prio & 0x7) | BIT(3)) << 8;
}
-static void rtl930x_create_tx_header(struct p_hdr *h, int dest_port, int prio)
+static void rtl930x_create_tx_header(struct p_hdr *h, unsigned int dest_port, int prio)
{
h->cpu_tag[0] = 0x8000; // CPU tag marker
h->cpu_tag[1] = h->cpu_tag[2] = 0;
@@ -147,7 +142,7 @@ static void rtl930x_create_tx_header(struct p_hdr *h, int dest_port, int prio)
h->cpu_tag[2] = (BIT(5) | (prio & 0x1f)) << 8;
}
-static void rtl931x_create_tx_header(struct p_hdr *h, int dest_port, int prio)
+static void rtl931x_create_tx_header(struct p_hdr *h, unsigned int dest_port, int prio)
{
h->cpu_tag[0] = 0x8000; // CPU tag marker
h->cpu_tag[1] = h->cpu_tag[2] = 0;
@@ -1144,9 +1139,10 @@ static int rtl838x_eth_tx(struct sk_buff *skb, struct net_device *dev)
len = skb->len;
/* Check for DSA tagging at the end of the buffer */
- if (netdev_uses_dsa(dev) && skb->data[len-4] == 0x80 && skb->data[len-3] > 0
- && skb->data[len-3] < priv->cpu_port && skb->data[len-2] == 0x10
- && skb->data[len-1] == 0x00) {
+ if (netdev_uses_dsa(dev) && skb->data[len-4] == 0x80
+ && skb->data[len-3] < priv->cpu_port
+ && skb->data[len-2] == 0x10
+ && skb->data[len-1] == 0x00) {
/* Reuse tag space for CRC if possible */
dest_port = skb->data[len-3];
skb->data[len-4] = skb->data[len-3] = skb->data[len-2] = skb->data[len-1] = 0x00;
@@ -1173,7 +1169,8 @@ static int rtl838x_eth_tx(struct sk_buff *skb, struct net_device *dev)
h->len -= 4;
}
- priv->r->create_tx_header(h, dest_port, skb->priority >> 1);
+ if (dest_port >= 0)
+ priv->r->create_tx_header(h, dest_port, skb->priority >> 1);
/* Copy packet data to tx buffer */
memcpy((void *)KSEG1ADDR(h->buf), skb->data, len);
diff --git a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.h b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.h
index 2d1f80dc9d..5db5f545b9 100644
--- a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.h
+++ b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.h
@@ -436,7 +436,7 @@ struct rtl838x_eth_reg {
int mac;
int l2_tbl_flush_ctrl;
void (*update_cntr)(int r, int work_done);
- void (*create_tx_header)(struct p_hdr *h, int dest_port, int prio);
+ void (*create_tx_header)(struct p_hdr *h, unsigned int dest_port, int prio);
bool (*decode_tag)(struct p_hdr *h, struct dsa_tag *tag);
};
More information about the lede-commits
mailing list