[openwrt/openwrt] lantiq: flag FritzBox 7360 family buttons active-low

[LEDE Commits]

blocktrron pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/31545378641d45f5fac5ffc408a31b700b80121f

commit 31545378641d45f5fac5ffc408a31b700b80121f
Author: David Bauer <mail at david-bauer.net>
AuthorDate: Fri Jan 14 22:03:24 2022 +0100

    lantiq: flag FritzBox 7360 family buttons active-low
    
    All buttons of the FritzBox 7360 family are active-low, not active-high.
    Corrent the GPIO flag. This fixes release triggers upon push of a button.
    
    Reported-by: Jan-Niklas Burfeind <git at aiyionpri.me>
    Signed-off-by: David Bauer <mail at david-bauer.net>
---
 .../lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi     | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi
index 83ef415423..8406539f69 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi
@@ -33,13 +33,13 @@
 
 		dect {
 			label = "dect";
-			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PHONE>;
 		};
 
 		wifi {
 			label = "wifi";
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RFKILL>;
 		};
 	};