[openwrt/openwrt] ramips: add support for Joowin WR758AC V1 and V2
LEDE Commits
lede-commits at lists.infradead.org
Fri Jan 7 16:28:40 PST 2022
hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/766733e17226221a310a30c91927a79f07a456e5
commit 766733e17226221a310a30c91927a79f07a456e5
Author: Rodrigo Araujo <araujo.rm at gmail.com>
AuthorDate: Fri Dec 10 20:09:37 2021 +0000
ramips: add support for Joowin WR758AC V1 and V2
This commit adds support for Joowin (aka Comfast) WR758AC V1 and V2
devices.
Both have the same wall AP/repeater form factor and differ only
in the 5Ghz chipset (V1 has MT7662, V2 has MT7663).
OpenWrt developers forum page:
https://forum.openwrt.org/t/87355
Specifications:
- CPU: MediaTek MT7628AN (580MHz)
- Flash: 8MB
- RAM: 64MB DDR2
- 2.4 GHz: 802.11b/g/n (MT7603)
- 5 GHz: 802.11ac (V1 has MT7662, V2 has MT7663)
- Antennas: 4x external single band antennas
- LAN: 1x 10/100M
- LED: Wifi 3x blue. Programmable
- Button: WPS
MAC addresses as verified by OEM firmware:
use address source
LAN *:83 factory 0xe000
2g *:85 factory 0x4
5g *:86 factory 0x8004
How to install:
1- Setup a TFTP server on a machine with IP address 192.168.1.10/24
2- Name the image as `firmware_auto.bin` and place it on the root of the
TFTP server
3- Connect the device via Ethernet, it should pick and flash the image
Signed-off-by: Rodrigo Araujo <araujo.rm at gmail.com>
---
.../ramips/dts/mt7628an_joowin_jw-wr758ac-v1.dts | 8 ++
.../ramips/dts/mt7628an_joowin_jw-wr758ac-v2.dts | 8 ++
.../ramips/dts/mt7628an_joowin_jw-wr758ac.dtsi | 124 +++++++++++++++++++++
target/linux/ramips/image/mt76x8.mk | 20 ++++
.../mt76x8/base-files/etc/board.d/02_network | 2 +
5 files changed, 162 insertions(+)
diff --git a/target/linux/ramips/dts/mt7628an_joowin_jw-wr758ac-v1.dts b/target/linux/ramips/dts/mt7628an_joowin_jw-wr758ac-v1.dts
new file mode 100644
index 0000000000..c3b52c82c1
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_joowin_jw-wr758ac-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7628an_joowin_jw-wr758ac.dtsi"
+
+/ {
+ compatible = "joowin,jw-wr758ac-v1", "mediatek,mt7628an-soc";
+ model = "Joowin WR758AC V1";
+};
diff --git a/target/linux/ramips/dts/mt7628an_joowin_jw-wr758ac-v2.dts b/target/linux/ramips/dts/mt7628an_joowin_jw-wr758ac-v2.dts
new file mode 100644
index 0000000000..1cc0d5d38d
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_joowin_jw-wr758ac-v2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7628an_joowin_jw-wr758ac.dtsi"
+
+/ {
+ compatible = "joowin,jw-wr758ac-v2", "mediatek,mt7628an-soc";
+ model = "Joowin WR758AC V2";
+};
diff --git a/target/linux/ramips/dts/mt7628an_joowin_jw-wr758ac.dtsi b/target/linux/ramips/dts/mt7628an_joowin_jw-wr758ac.dtsi
new file mode 100644
index 0000000000..97845cf02b
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_joowin_jw-wr758ac.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "joowin,jw-wr758ac", "mediatek,mt7628an-soc";
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi-high {
+ label = "blue:wifi-high";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi-med {
+ label = "blue:wifi-med";
+ gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi-low {
+ label = "blue:wifi-low";
+ gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "refclk", "wdt", "wled_an";
+ function = "gpio";
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+ðernet {
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&esw {
+ mediatek,portdisable = <0x2f>;
+};
+
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_e000: macaddr at e000 {
+ reg = <0xe000 0x6>;
+ };
+};
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index e9188e7405..29c2613685 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -220,6 +220,26 @@ define Device/iptime_a604m
endef
TARGET_DEVICES += iptime_a604m
+define Device/joowin_jw-wr758ac
+ IMAGE_SIZE := 7872k
+ DEVICE_VENDOR := Joowin
+ DEVICE_MODEL := WR758AC
+endef
+
+define Device/joowin_jw-wr758ac-v1
+ $(Device/joowin_jw-wr758ac)
+ DEVICE_PACKAGES := kmod-mt76x2
+ DEVICE_VARIANT := V1
+endef
+TARGET_DEVICES += joowin_jw-wr758ac-v1
+
+define Device/joowin_jw-wr758ac-v2
+ $(Device/joowin_jw-wr758ac)
+ DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap
+ DEVICE_VARIANT := V2
+endef
+TARGET_DEVICES += joowin_jw-wr758ac-v2
+
define Device/jotale_js76x8
DEVICE_VENDOR := Jotale
DEVICE_MODEL := JS76x8
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
index 08b2e6cebc..43d2647cf0 100644
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -129,6 +129,8 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:wan" "6 at eth0"
;;
+ joowin,jw-wr758ac-v1|\
+ joowin,jw-wr758ac-v2|\
tplink,tl-wr902ac-v3|\
wavlink,wl-wn576a2)
ucidef_add_switch "switch0" \
More information about the lede-commits
mailing list