[openwrt/openwrt] ath79: fix wndr4500v3 lan port order to match case

[LEDE Commits]

mans0n pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/e282e50d44910956d145950e62b75d4fc9a5e20d

commit e282e50d44910956d145950e62b75d4fc9a5e20d
Author: Graham Cole <diakka at gmail.com>
AuthorDate: Sat Feb 19 21:45:01 2022 -0500

    ath79: fix wndr4500v3 lan port order to match case
    
    The LED and LAN port numbering on the case of wndr4500v3 devices are
    reversed relative to the wndr4300v2. I created this patch to so that the
    ordering in OpenWRT will be consistent with that.
    
    Signed-off-by: Graham Cole <diakka at gmail.com>
---
 target/linux/ath79/nand/base-files/etc/board.d/02_network | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/target/linux/ath79/nand/base-files/etc/board.d/02_network b/target/linux/ath79/nand/base-files/etc/board.d/02_network
index 2c85245bee..e26a5e4ddf 100644
--- a/target/linux/ath79/nand/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/nand/base-files/etc/board.d/02_network
@@ -33,11 +33,14 @@ ath79_setup_interfaces()
 	netgear,wndr3700-v4|\
 	netgear,wndr4300|\
 	netgear,wndr4300sw|\
-	netgear,wndr4300-v2|\
-	netgear,wndr4500-v3)
+	netgear,wndr4300-v2)
 		ucidef_add_switch "switch0" \
 			"0 at eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
 		;;
+	netgear,wndr4500-v3)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+		;;
 	netgear,wndr4300tn)
 		ucidef_add_switch "switch0" \
 			"0 at eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"