[openwrt/openwrt] realtek: simplify log messages in rtl83xx_mdio_probe

[LEDE Commits]

svanheule pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/9aa123d778e2631c2698a60ceeec610a14e1343b

commit 9aa123d778e2631c2698a60ceeec610a14e1343b
Author: Jan Hoffmann <jan at 3e8.eu>
AuthorDate: Sat Dec 17 21:45:41 2022 +0100

    realtek: simplify log messages in rtl83xx_mdio_probe
    
    This function currently prints three messages for every switch port at
    KERN_INFO level. This takes a considerable amount of time during bootup
    and can even trigger an external watchdog.
    
    Replace these log messages by a single one at KERN_DEBUG level.
    
    Signed-off-by: Jan Hoffmann <jan at 3e8.eu>
---
 target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c | 8 +-------
 target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c | 8 +-------
 2 files changed, 2 insertions(+), 14 deletions(-)

diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c
index e86ff9ccdf..63c024c81e 100644
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c
+++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c
@@ -323,7 +323,6 @@ static int __init rtl83xx_mdio_probe(struct rtl838x_switch_priv *priv)
 		if (of_property_read_u32(dn, "reg", &pn))
 			continue;
 
-		pr_info("%s found port %d\n", __func__, pn);
 		phy_node = of_parse_phandle(dn, "phy-handle", 0);
 		if (!phy_node) {
 			if (pn != priv->cpu_port)
@@ -331,14 +330,9 @@ static int __init rtl83xx_mdio_probe(struct rtl838x_switch_priv *priv)
 			continue;
 		}
 
-		pr_info("%s port %d has phandle\n", __func__, pn);
 		if (of_property_read_u32(phy_node, "sds", &priv->ports[pn].sds_num))
 			priv->ports[pn].sds_num = -1;
-		else {
-			pr_info("%s sds port %d is %d\n", __func__, pn,
-				priv->ports[pn].sds_num);
-		}
-		pr_info("%s port %d has SDS\n", __func__, priv->ports[pn].sds_num);
+		pr_debug("%s port %d has SDS %d\n", __func__, pn, priv->ports[pn].sds_num);
 
 		if (of_get_phy_mode(dn, &interface))
 			interface = PHY_INTERFACE_MODE_NA;
diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c
index b5afed0ef5..8b0b55d891 100644
--- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c
+++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c
@@ -323,7 +323,6 @@ static int __init rtl83xx_mdio_probe(struct rtl838x_switch_priv *priv)
 		if (of_property_read_u32(dn, "reg", &pn))
 			continue;
 
-		pr_info("%s found port %d\n", __func__, pn);
 		phy_node = of_parse_phandle(dn, "phy-handle", 0);
 		if (!phy_node) {
 			if (pn != priv->cpu_port)
@@ -331,14 +330,9 @@ static int __init rtl83xx_mdio_probe(struct rtl838x_switch_priv *priv)
 			continue;
 		}
 
-		pr_info("%s port %d has phandle\n", __func__, pn);
 		if (of_property_read_u32(phy_node, "sds", &priv->ports[pn].sds_num))
 			priv->ports[pn].sds_num = -1;
-		else {
-			pr_info("%s sds port %d is %d\n", __func__, pn,
-				priv->ports[pn].sds_num);
-		}
-		pr_info("%s port %d has SDS\n", __func__, priv->ports[pn].sds_num);
+		pr_debug("%s port %d has SDS %d\n", __func__, pn, priv->ports[pn].sds_num);
 
 		if (of_get_phy_mode(dn, &interface))
 			interface = PHY_INTERFACE_MODE_NA;