[openwrt/openwrt] realtek: drop patches of upstreamed drivers from 5.15
LEDE Commits
lede-commits at lists.infradead.org
Thu Dec 15 12:02:29 PST 2022
svanheule pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/a9d5a8bc79b1246c7ae39f2fb6e9ed30bc3dd781
commit a9d5a8bc79b1246c7ae39f2fb6e9ed30bc3dd781
Author: INAGAKI Hiroshi <musashino.open at gmail.com>
AuthorDate: Fri Jul 22 22:05:51 2022 +0900
realtek: drop patches of upstreamed drivers from 5.15
The following drivers were upstreamed and available on 5.15, so drop
from OpenWrt tree.
- realtek-otto-gpio (5.13)
- realtek-rtl-spi (5.12)
- realtek-rtl-intc (5.12)
Signed-off-by: INAGAKI Hiroshi <musashino.open at gmail.com>
---
...ndings-gpio-binding-for-realtek-otto-gpio.patch | 103 ------
...2-5.13-gpio-add-realtek-otto-gpio-support.patch | 394 ---------------------
...pi-realtek-rtl838x-rtl839x-spi-controller.patch | 57 ---
...r-realtek-rtl838x-rtl839x-spi-controllers.patch | 248 -------------
...oller-add-realtek-rtl838x-rtl839x-support.patch | 78 ----
...ltek-rtl838x-rtl839x-interrupt-controller.patch | 211 -----------
6 files changed, 1091 deletions(-)
diff --git a/target/linux/realtek/patches-5.15/001-5.13-dt-bindings-gpio-binding-for-realtek-otto-gpio.patch b/target/linux/realtek/patches-5.15/001-5.13-dt-bindings-gpio-binding-for-realtek-otto-gpio.patch
deleted file mode 100644
index 80b806d89f..0000000000
--- a/target/linux/realtek/patches-5.15/001-5.13-dt-bindings-gpio-binding-for-realtek-otto-gpio.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From a362c0ce64866939c3daa17c76943cfed555b065 Mon Sep 17 00:00:00 2001
-From: Sander Vanheule <sander at svanheule.net>
-Date: Tue, 30 Mar 2021 19:48:42 +0200
-Subject: dt-bindings: gpio: Binding for Realtek Otto GPIO
-
-Add a binding description for Realtek's GPIO controller found on several
-of their MIPS-based SoCs (codenamed Otto), such as the RTL838x and
-RTL839x series of switch SoCs.
-
-A fallback binding 'realtek,otto-gpio' is provided for cases where the
-actual port ordering is not known yet, and enabling the interrupt
-controller may result in uncaught interrupts.
-
-Signed-off-by: Sander Vanheule <sander at svanheule.net>
-Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
-Reviewed-by: Rob Herring <robh at kernel.org>
-Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
----
- .../bindings/gpio/realtek,otto-gpio.yaml | 78 ++++++++++++++++++++++
- 1 file changed, 78 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
-@@ -0,0 +1,78 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/gpio/realtek,otto-gpio.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Realtek Otto GPIO controller
-+
-+maintainers:
-+ - Sander Vanheule <sander at svanheule.net>
-+ - Bert Vermeulen <bert at biot.com>
-+
-+description: |
-+ Realtek's GPIO controller on their MIPS switch SoCs (Otto platform) consists
-+ of two banks of 32 GPIOs. These GPIOs can generate edge-triggered interrupts.
-+ Each bank's interrupts are cascased into one interrupt line on the parent
-+ interrupt controller, if provided.
-+ This binding allows defining a single bank in the devicetree. The interrupt
-+ controller is not supported on the fallback compatible name, which only
-+ allows for GPIO port use.
-+
-+properties:
-+ $nodename:
-+ pattern: "^gpio@[0-9a-f]+$"
-+
-+ compatible:
-+ items:
-+ - enum:
-+ - realtek,rtl8380-gpio
-+ - realtek,rtl8390-gpio
-+ - const: realtek,otto-gpio
-+
-+ reg:
-+ maxItems: 1
-+
-+ "#gpio-cells":
-+ const: 2
-+
-+ gpio-controller: true
-+
-+ ngpios:
-+ minimum: 1
-+ maximum: 32
-+
-+ interrupt-controller: true
-+
-+ "#interrupt-cells":
-+ const: 2
-+
-+ interrupts:
-+ maxItems: 1
-+
-+required:
-+ - compatible
-+ - reg
-+ - "#gpio-cells"
-+ - gpio-controller
-+
-+additionalProperties: false
-+
-+dependencies:
-+ interrupt-controller: [ interrupts ]
-+
-+examples:
-+ - |
-+ gpio at 3500 {
-+ compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
-+ reg = <0x3500 0x1c>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ ngpios = <24>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ interrupt-parent = <&rtlintc>;
-+ interrupts = <23>;
-+ };
-+
-+...
diff --git a/target/linux/realtek/patches-5.15/002-5.13-gpio-add-realtek-otto-gpio-support.patch b/target/linux/realtek/patches-5.15/002-5.13-gpio-add-realtek-otto-gpio-support.patch
deleted file mode 100644
index 62e4338cbb..0000000000
--- a/target/linux/realtek/patches-5.15/002-5.13-gpio-add-realtek-otto-gpio-support.patch
+++ /dev/null
@@ -1,394 +0,0 @@
-From f0f7d662e8514169c90d3d84cd6df773b2983088 Mon Sep 17 00:00:00 2001
-From: Sander Vanheule <sander at svanheule.net>
-Date: Tue, 30 Mar 2021 19:48:43 +0200
-Subject: gpio: Add Realtek Otto GPIO support
-
-Realtek MIPS SoCs (platform name Otto) have GPIO controllers with up to
-64 GPIOs, divided over two banks. Each bank has a set of registers for
-32 GPIOs, with support for edge-triggered interrupts.
-
-Each GPIO bank consists of four 8-bit GPIO ports (ABCD and EFGH). Most
-registers pack one bit per GPIO, except for the IMR register, which
-packs two bits per GPIO (AB-CD).
-
-Although the byte order is currently assumed to have port A..D at offset
-0x0..0x3, this has been observed to be reversed on other, Lexra-based,
-SoCs (e.g. RTL8196E/97D/97F).
-
-Interrupt support is disabled for the fallback devicetree-compatible
-'realtek,otto-gpio'. This allows for quick support of GPIO banks in
-which the byte order would be unknown. In this case, the port ordering
-in the IMR registers may not match the reversed order in the other
-registers (DCBA, and BA-DC or DC-BA).
-
-Signed-off-by: Sander Vanheule <sander at svanheule.net>
-Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
-Reviewed-by: Andy Shevchenko <andy.shevchenko at gmail.com>
-Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
----
- drivers/gpio/Kconfig | 13 ++
- drivers/gpio/Makefile | 1 +
- drivers/gpio/gpio-realtek-otto.c | 325 +++++++++++++++++++++++++++++++++++++++
- 3 files changed, 339 insertions(+)
- create mode 100644 drivers/gpio/gpio-realtek-otto.c
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -489,6 +489,19 @@ config GPIO_RDA
- help
- Say Y here to support RDA Micro GPIO controller.
-
-+config GPIO_REALTEK_OTTO
-+ tristate "Realtek Otto GPIO support"
-+ depends on MACH_REALTEK_RTL
-+ default MACH_REALTEK_RTL
-+ select GPIO_GENERIC
-+ select GPIOLIB_IRQCHIP
-+ help
-+ The GPIO controller on the Otto MIPS platform supports up to two
-+ banks of 32 GPIOs, with edge triggered interrupts. The 32 GPIOs
-+ are grouped in four 8-bit wide ports.
-+
-+ When built as a module, the module will be called realtek_otto_gpio.
-+
- config GPIO_REG
- bool
- help
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -125,6 +125,7 @@ obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t
- obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
- obj-$(CONFIG_GPIO_RDA) += gpio-rda.o
- obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
-+obj-$(CONFIG_GPIO_REALTEK_OTTO) += gpio-realtek-otto.o
- obj-$(CONFIG_GPIO_REG) += gpio-reg.o
- obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
- obj-$(CONFIG_GPIO_SAMA5D2_PIOBU) += gpio-sama5d2-piobu.o
---- /dev/null
-+++ b/drivers/gpio/gpio-realtek-otto.c
-@@ -0,0 +1,325 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+
-+#include <linux/gpio/driver.h>
-+#include <linux/irq.h>
-+#include <linux/minmax.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/property.h>
-+
-+/*
-+ * Total register block size is 0x1C for one bank of four ports (A, B, C, D).
-+ * An optional second bank, with ports E, F, G, and H, may be present, starting
-+ * at register offset 0x1C.
-+ */
-+
-+/*
-+ * Pin select: (0) "normal", (1) "dedicate peripheral"
-+ * Not used on RTL8380/RTL8390, peripheral selection is managed by control bits
-+ * in the peripheral registers.
-+ */
-+#define REALTEK_GPIO_REG_CNR 0x00
-+/* Clear bit (0) for input, set bit (1) for output */
-+#define REALTEK_GPIO_REG_DIR 0x08
-+#define REALTEK_GPIO_REG_DATA 0x0C
-+/* Read bit for IRQ status, write 1 to clear IRQ */
-+#define REALTEK_GPIO_REG_ISR 0x10
-+/* Two bits per GPIO in IMR registers */
-+#define REALTEK_GPIO_REG_IMR 0x14
-+#define REALTEK_GPIO_REG_IMR_AB 0x14
-+#define REALTEK_GPIO_REG_IMR_CD 0x18
-+#define REALTEK_GPIO_IMR_LINE_MASK GENMASK(1, 0)
-+#define REALTEK_GPIO_IRQ_EDGE_FALLING 1
-+#define REALTEK_GPIO_IRQ_EDGE_RISING 2
-+#define REALTEK_GPIO_IRQ_EDGE_BOTH 3
-+
-+#define REALTEK_GPIO_MAX 32
-+#define REALTEK_GPIO_PORTS_PER_BANK 4
-+
-+/**
-+ * realtek_gpio_ctrl - Realtek Otto GPIO driver data
-+ *
-+ * @gc: Associated gpio_chip instance
-+ * @base: Base address of the register block for a GPIO bank
-+ * @lock: Lock for accessing the IRQ registers and values
-+ * @intr_mask: Mask for interrupts lines
-+ * @intr_type: Interrupt type selection
-+ *
-+ * Because the interrupt mask register (IMR) combines the function of IRQ type
-+ * selection and masking, two extra values are stored. @intr_mask is used to
-+ * mask/unmask the interrupts for a GPIO port, and @intr_type is used to store
-+ * the selected interrupt types. The logical AND of these values is written to
-+ * IMR on changes.
-+ */
-+struct realtek_gpio_ctrl {
-+ struct gpio_chip gc;
-+ void __iomem *base;
-+ raw_spinlock_t lock;
-+ u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK];
-+ u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK];
-+};
-+
-+/* Expand with more flags as devices with other quirks are added */
-+enum realtek_gpio_flags {
-+ /*
-+ * Allow disabling interrupts, for cases where the port order is
-+ * unknown. This may result in a port mismatch between ISR and IMR.
-+ * An interrupt would appear to come from a different line than the
-+ * line the IRQ handler was assigned to, causing uncaught interrupts.
-+ */
-+ GPIO_INTERRUPTS_DISABLED = BIT(0),
-+};
-+
-+static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data)
-+{
-+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
-+
-+ return container_of(gc, struct realtek_gpio_ctrl, gc);
-+}
-+
-+/*
-+ * Normal port order register access
-+ *
-+ * Port information is stored with the first port at offset 0, followed by the
-+ * second, etc. Most registers store one bit per GPIO and use a u8 value per
-+ * port. The two interrupt mask registers store two bits per GPIO, so use u16
-+ * values.
-+ */
-+static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl,
-+ unsigned int port, u16 irq_type, u16 irq_mask)
-+{
-+ iowrite16(irq_type & irq_mask, ctrl->base + REALTEK_GPIO_REG_IMR + 2 * port);
-+}
-+
-+static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl,
-+ unsigned int port, u8 mask)
-+{
-+ iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + port);
-+}
-+
-+static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port)
-+{
-+ return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + port);
-+}
-+
-+/* Set the rising and falling edge mask bits for a GPIO port pin */
-+static u16 realtek_gpio_imr_bits(unsigned int pin, u16 value)
-+{
-+ return (value & REALTEK_GPIO_IMR_LINE_MASK) << 2 * pin;
-+}
-+
-+static void realtek_gpio_irq_ack(struct irq_data *data)
-+{
-+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
-+ irq_hw_number_t line = irqd_to_hwirq(data);
-+ unsigned int port = line / 8;
-+ unsigned int port_pin = line % 8;
-+
-+ realtek_gpio_clear_isr(ctrl, port, BIT(port_pin));
-+}
-+
-+static void realtek_gpio_irq_unmask(struct irq_data *data)
-+{
-+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
-+ unsigned int line = irqd_to_hwirq(data);
-+ unsigned int port = line / 8;
-+ unsigned int port_pin = line % 8;
-+ unsigned long flags;
-+ u16 m;
-+
-+ raw_spin_lock_irqsave(&ctrl->lock, flags);
-+ m = ctrl->intr_mask[port];
-+ m |= realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
-+ ctrl->intr_mask[port] = m;
-+ realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
-+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
-+}
-+
-+static void realtek_gpio_irq_mask(struct irq_data *data)
-+{
-+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
-+ unsigned int line = irqd_to_hwirq(data);
-+ unsigned int port = line / 8;
-+ unsigned int port_pin = line % 8;
-+ unsigned long flags;
-+ u16 m;
-+
-+ raw_spin_lock_irqsave(&ctrl->lock, flags);
-+ m = ctrl->intr_mask[port];
-+ m &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
-+ ctrl->intr_mask[port] = m;
-+ realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
-+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
-+}
-+
-+static int realtek_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
-+{
-+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
-+ unsigned int line = irqd_to_hwirq(data);
-+ unsigned int port = line / 8;
-+ unsigned int port_pin = line % 8;
-+ unsigned long flags;
-+ u16 type, t;
-+
-+ switch (flow_type & IRQ_TYPE_SENSE_MASK) {
-+ case IRQ_TYPE_EDGE_FALLING:
-+ type = REALTEK_GPIO_IRQ_EDGE_FALLING;
-+ break;
-+ case IRQ_TYPE_EDGE_RISING:
-+ type = REALTEK_GPIO_IRQ_EDGE_RISING;
-+ break;
-+ case IRQ_TYPE_EDGE_BOTH:
-+ type = REALTEK_GPIO_IRQ_EDGE_BOTH;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ irq_set_handler_locked(data, handle_edge_irq);
-+
-+ raw_spin_lock_irqsave(&ctrl->lock, flags);
-+ t = ctrl->intr_type[port];
-+ t &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
-+ t |= realtek_gpio_imr_bits(port_pin, type);
-+ ctrl->intr_type[port] = t;
-+ realtek_gpio_write_imr(ctrl, port, t, ctrl->intr_mask[port]);
-+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
-+
-+ return 0;
-+}
-+
-+static void realtek_gpio_irq_handler(struct irq_desc *desc)
-+{
-+ struct gpio_chip *gc = irq_desc_get_handler_data(desc);
-+ struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
-+ struct irq_chip *irq_chip = irq_desc_get_chip(desc);
-+ unsigned int lines_done;
-+ unsigned int port_pin_count;
-+ unsigned int irq;
-+ unsigned long status;
-+ int offset;
-+
-+ chained_irq_enter(irq_chip, desc);
-+
-+ for (lines_done = 0; lines_done < gc->ngpio; lines_done += 8) {
-+ status = realtek_gpio_read_isr(ctrl, lines_done / 8);
-+ port_pin_count = min(gc->ngpio - lines_done, 8U);
-+ for_each_set_bit(offset, &status, port_pin_count) {
-+ irq = irq_find_mapping(gc->irq.domain, offset);
-+ generic_handle_irq(irq);
-+ }
-+ }
-+
-+ chained_irq_exit(irq_chip, desc);
-+}
-+
-+static int realtek_gpio_irq_init(struct gpio_chip *gc)
-+{
-+ struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
-+ unsigned int port;
-+
-+ for (port = 0; (port * 8) < gc->ngpio; port++) {
-+ realtek_gpio_write_imr(ctrl, port, 0, 0);
-+ realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0));
-+ }
-+
-+ return 0;
-+}
-+
-+static struct irq_chip realtek_gpio_irq_chip = {
-+ .name = "realtek-otto-gpio",
-+ .irq_ack = realtek_gpio_irq_ack,
-+ .irq_mask = realtek_gpio_irq_mask,
-+ .irq_unmask = realtek_gpio_irq_unmask,
-+ .irq_set_type = realtek_gpio_irq_set_type,
-+};
-+
-+static const struct of_device_id realtek_gpio_of_match[] = {
-+ {
-+ .compatible = "realtek,otto-gpio",
-+ .data = (void *)GPIO_INTERRUPTS_DISABLED,
-+ },
-+ {
-+ .compatible = "realtek,rtl8380-gpio",
-+ },
-+ {
-+ .compatible = "realtek,rtl8390-gpio",
-+ },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, realtek_gpio_of_match);
-+
-+static int realtek_gpio_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ unsigned int dev_flags;
-+ struct gpio_irq_chip *girq;
-+ struct realtek_gpio_ctrl *ctrl;
-+ u32 ngpios;
-+ int err, irq;
-+
-+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
-+ if (!ctrl)
-+ return -ENOMEM;
-+
-+ dev_flags = (unsigned int) device_get_match_data(dev);
-+
-+ ngpios = REALTEK_GPIO_MAX;
-+ device_property_read_u32(dev, "ngpios", &ngpios);
-+
-+ if (ngpios > REALTEK_GPIO_MAX) {
-+ dev_err(&pdev->dev, "invalid ngpios (max. %d)\n",
-+ REALTEK_GPIO_MAX);
-+ return -EINVAL;
-+ }
-+
-+ ctrl->base = devm_platform_ioremap_resource(pdev, 0);
-+ if (IS_ERR(ctrl->base))
-+ return PTR_ERR(ctrl->base);
-+
-+ raw_spin_lock_init(&ctrl->lock);
-+
-+ err = bgpio_init(&ctrl->gc, dev, 4,
-+ ctrl->base + REALTEK_GPIO_REG_DATA, NULL, NULL,
-+ ctrl->base + REALTEK_GPIO_REG_DIR, NULL,
-+ BGPIOF_BIG_ENDIAN_BYTE_ORDER);
-+ if (err) {
-+ dev_err(dev, "unable to init generic GPIO");
-+ return err;
-+ }
-+
-+ ctrl->gc.ngpio = ngpios;
-+ ctrl->gc.owner = THIS_MODULE;
-+
-+ irq = platform_get_irq_optional(pdev, 0);
-+ if (!(dev_flags & GPIO_INTERRUPTS_DISABLED) && irq > 0) {
-+ girq = &ctrl->gc.irq;
-+ girq->chip = &realtek_gpio_irq_chip;
-+ girq->default_type = IRQ_TYPE_NONE;
-+ girq->handler = handle_bad_irq;
-+ girq->parent_handler = realtek_gpio_irq_handler;
-+ girq->num_parents = 1;
-+ girq->parents = devm_kcalloc(dev, girq->num_parents,
-+ sizeof(*girq->parents), GFP_KERNEL);
-+ if (!girq->parents)
-+ return -ENOMEM;
-+ girq->parents[0] = irq;
-+ girq->init_hw = realtek_gpio_irq_init;
-+ }
-+
-+ return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
-+}
-+
-+static struct platform_driver realtek_gpio_driver = {
-+ .driver = {
-+ .name = "realtek-otto-gpio",
-+ .of_match_table = realtek_gpio_of_match,
-+ },
-+ .probe = realtek_gpio_probe,
-+};
-+module_platform_driver(realtek_gpio_driver);
-+
-+MODULE_DESCRIPTION("Realtek Otto GPIO support");
-+MODULE_AUTHOR("Sander Vanheule <sander at svanheule.net>");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/realtek/patches-5.15/003-5.12-spi-realtek-rtl838x-rtl839x-spi-controller.patch b/target/linux/realtek/patches-5.15/003-5.12-spi-realtek-rtl838x-rtl839x-spi-controller.patch
deleted file mode 100644
index 325e904994..0000000000
--- a/target/linux/realtek/patches-5.15/003-5.12-spi-realtek-rtl838x-rtl839x-spi-controller.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 6acbd614c2c8d3b8de5fb7605d6e24b9b3a8a17b Mon Sep 17 00:00:00 2001
-From: Bert Vermeulen <bert at biot.com>
-Date: Wed, 20 Jan 2021 14:59:27 +0100
-Subject: spi: Realtek RTL838x/RTL839x SPI controller
-
-Signed-off-by: Bert Vermeulen <bert at biot.com>
-Link: https://lore.kernel.org/r/20210120135928.246054-2-bert@biot.com
-Signed-off-by: Mark Brown <broonie at kernel.org>
----
- .../devicetree/bindings/spi/realtek,rtl-spi.yaml | 41 ++++++++++++++++++++++
- 1 file changed, 41 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
-@@ -0,0 +1,41 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/spi/realtek,rtl-spi.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Realtek RTL838x/RTL839x SPI controller
-+
-+maintainers:
-+ - Bert Vermeulen <bert at biot.com>
-+ - Birger Koblitz <mail at birger-koblitz.de>
-+
-+allOf:
-+ - $ref: "spi-controller.yaml#"
-+
-+properties:
-+ compatible:
-+ oneOf:
-+ - const: realtek,rtl8380-spi
-+ - const: realtek,rtl8382-spi
-+ - const: realtek,rtl8391-spi
-+ - const: realtek,rtl8392-spi
-+ - const: realtek,rtl8393-spi
-+
-+ reg:
-+ maxItems: 1
-+
-+required:
-+ - compatible
-+ - reg
-+
-+unevaluatedProperties: false
-+
-+examples:
-+ - |
-+ spi: spi at 1200 {
-+ compatible = "realtek,rtl8382-spi";
-+ reg = <0x1200 0x100>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
diff --git a/target/linux/realtek/patches-5.15/004-5.12-spi-realtek-rtl-add-support-for-realtek-rtl838x-rtl839x-spi-controllers.patch b/target/linux/realtek/patches-5.15/004-5.12-spi-realtek-rtl-add-support-for-realtek-rtl838x-rtl839x-spi-controllers.patch
deleted file mode 100644
index 090847baad..0000000000
--- a/target/linux/realtek/patches-5.15/004-5.12-spi-realtek-rtl-add-support-for-realtek-rtl838x-rtl839x-spi-controllers.patch
+++ /dev/null
@@ -1,248 +0,0 @@
-From a8af5cc2ff1e804694629a8ef320935629dd15ba Mon Sep 17 00:00:00 2001
-From: Bert Vermeulen <bert at biot.com>
-Date: Wed, 20 Jan 2021 14:59:28 +0100
-Subject: spi: realtek-rtl: Add support for Realtek RTL838x/RTL839x SPI
- controllers
-
-This driver likely also supports earlier (RTL8196) and later (RTL93xx)
-SoCs.
-
-The SPI hardware in these SoCs is specifically intended for connecting NOR
-bootflash chips, and only used for that in dozens of examined devices.
-However boiled down to basics, it's really just a half-duplex SPI
-controller.
-
-The hardware appears to have a vestigial second chip-select control, but
-it hasn't been seen in the wild and is thus not supported.
-
-Signed-off-by: Bert Vermeulen <bert at biot.com>
-Link: https://lore.kernel.org/r/20210120135928.246054-3-bert@biot.com
-Signed-off-by: Mark Brown <broonie at kernel.org>
----
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-realtek-rtl.c | 209 ++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 210 insertions(+)
- create mode 100644 drivers/spi/spi-realtek-rtl.c
-
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -94,6 +94,7 @@ obj-$(CONFIG_SPI_QCOM_QSPI) += spi-qcom
- obj-$(CONFIG_SPI_QUP) += spi-qup.o
- obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
- obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
-+obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o
- obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
- obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
- obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
---- /dev/null
-+++ b/drivers/spi/spi-realtek-rtl.c
-@@ -0,0 +1,209 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/spi/spi.h>
-+
-+struct rtspi {
-+ void __iomem *base;
-+};
-+
-+/* SPI Flash Configuration Register */
-+#define RTL_SPI_SFCR 0x00
-+#define RTL_SPI_SFCR_RBO BIT(28)
-+#define RTL_SPI_SFCR_WBO BIT(27)
-+
-+/* SPI Flash Control and Status Register */
-+#define RTL_SPI_SFCSR 0x08
-+#define RTL_SPI_SFCSR_CSB0 BIT(31)
-+#define RTL_SPI_SFCSR_CSB1 BIT(30)
-+#define RTL_SPI_SFCSR_RDY BIT(27)
-+#define RTL_SPI_SFCSR_CS BIT(24)
-+#define RTL_SPI_SFCSR_LEN_MASK ~(0x03 << 28)
-+#define RTL_SPI_SFCSR_LEN1 (0x00 << 28)
-+#define RTL_SPI_SFCSR_LEN4 (0x03 << 28)
-+
-+/* SPI Flash Data Register */
-+#define RTL_SPI_SFDR 0x0c
-+
-+#define REG(x) (rtspi->base + x)
-+
-+
-+static void rt_set_cs(struct spi_device *spi, bool active)
-+{
-+ struct rtspi *rtspi = spi_controller_get_devdata(spi->controller);
-+ u32 value;
-+
-+ /* CS0 bit is active low */
-+ value = readl(REG(RTL_SPI_SFCSR));
-+ if (active)
-+ value |= RTL_SPI_SFCSR_CSB0;
-+ else
-+ value &= ~RTL_SPI_SFCSR_CSB0;
-+ writel(value, REG(RTL_SPI_SFCSR));
-+}
-+
-+static void set_size(struct rtspi *rtspi, int size)
-+{
-+ u32 value;
-+
-+ value = readl(REG(RTL_SPI_SFCSR));
-+ value &= RTL_SPI_SFCSR_LEN_MASK;
-+ if (size == 4)
-+ value |= RTL_SPI_SFCSR_LEN4;
-+ else if (size == 1)
-+ value |= RTL_SPI_SFCSR_LEN1;
-+ writel(value, REG(RTL_SPI_SFCSR));
-+}
-+
-+static inline void wait_ready(struct rtspi *rtspi)
-+{
-+ while (!(readl(REG(RTL_SPI_SFCSR)) & RTL_SPI_SFCSR_RDY))
-+ cpu_relax();
-+}
-+static void send4(struct rtspi *rtspi, const u32 *buf)
-+{
-+ wait_ready(rtspi);
-+ set_size(rtspi, 4);
-+ writel(*buf, REG(RTL_SPI_SFDR));
-+}
-+
-+static void send1(struct rtspi *rtspi, const u8 *buf)
-+{
-+ wait_ready(rtspi);
-+ set_size(rtspi, 1);
-+ writel(buf[0] << 24, REG(RTL_SPI_SFDR));
-+}
-+
-+static void rcv4(struct rtspi *rtspi, u32 *buf)
-+{
-+ wait_ready(rtspi);
-+ set_size(rtspi, 4);
-+ *buf = readl(REG(RTL_SPI_SFDR));
-+}
-+
-+static void rcv1(struct rtspi *rtspi, u8 *buf)
-+{
-+ wait_ready(rtspi);
-+ set_size(rtspi, 1);
-+ *buf = readl(REG(RTL_SPI_SFDR)) >> 24;
-+}
-+
-+static int transfer_one(struct spi_controller *ctrl, struct spi_device *spi,
-+ struct spi_transfer *xfer)
-+{
-+ struct rtspi *rtspi = spi_controller_get_devdata(ctrl);
-+ void *rx_buf;
-+ const void *tx_buf;
-+ int cnt;
-+
-+ tx_buf = xfer->tx_buf;
-+ rx_buf = xfer->rx_buf;
-+ cnt = xfer->len;
-+ if (tx_buf) {
-+ while (cnt >= 4) {
-+ send4(rtspi, tx_buf);
-+ tx_buf += 4;
-+ cnt -= 4;
-+ }
-+ while (cnt) {
-+ send1(rtspi, tx_buf);
-+ tx_buf++;
-+ cnt--;
-+ }
-+ } else if (rx_buf) {
-+ while (cnt >= 4) {
-+ rcv4(rtspi, rx_buf);
-+ rx_buf += 4;
-+ cnt -= 4;
-+ }
-+ while (cnt) {
-+ rcv1(rtspi, rx_buf);
-+ rx_buf++;
-+ cnt--;
-+ }
-+ }
-+
-+ spi_finalize_current_transfer(ctrl);
-+
-+ return 0;
-+}
-+
-+static void init_hw(struct rtspi *rtspi)
-+{
-+ u32 value;
-+
-+ /* Turn on big-endian byte ordering */
-+ value = readl(REG(RTL_SPI_SFCR));
-+ value |= RTL_SPI_SFCR_RBO | RTL_SPI_SFCR_WBO;
-+ writel(value, REG(RTL_SPI_SFCR));
-+
-+ value = readl(REG(RTL_SPI_SFCSR));
-+ /* Permanently disable CS1, since it's never used */
-+ value |= RTL_SPI_SFCSR_CSB1;
-+ /* Select CS0 for use */
-+ value &= RTL_SPI_SFCSR_CS;
-+ writel(value, REG(RTL_SPI_SFCSR));
-+}
-+
-+static int realtek_rtl_spi_probe(struct platform_device *pdev)
-+{
-+ struct spi_controller *ctrl;
-+ struct rtspi *rtspi;
-+ int err;
-+
-+ ctrl = devm_spi_alloc_master(&pdev->dev, sizeof(*rtspi));
-+ if (!ctrl) {
-+ dev_err(&pdev->dev, "Error allocating SPI controller\n");
-+ return -ENOMEM;
-+ }
-+ platform_set_drvdata(pdev, ctrl);
-+ rtspi = spi_controller_get_devdata(ctrl);
-+
-+ rtspi->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
-+ if (IS_ERR(rtspi->base)) {
-+ dev_err(&pdev->dev, "Could not map SPI register address");
-+ return -ENOMEM;
-+ }
-+
-+ init_hw(rtspi);
-+
-+ ctrl->dev.of_node = pdev->dev.of_node;
-+ ctrl->flags = SPI_CONTROLLER_HALF_DUPLEX;
-+ ctrl->set_cs = rt_set_cs;
-+ ctrl->transfer_one = transfer_one;
-+
-+ err = devm_spi_register_controller(&pdev->dev, ctrl);
-+ if (err) {
-+ dev_err(&pdev->dev, "Could not register SPI controller\n");
-+ return -ENODEV;
-+ }
-+
-+ return 0;
-+}
-+
-+
-+static const struct of_device_id realtek_rtl_spi_of_ids[] = {
-+ { .compatible = "realtek,rtl8380-spi" },
-+ { .compatible = "realtek,rtl8382-spi" },
-+ { .compatible = "realtek,rtl8391-spi" },
-+ { .compatible = "realtek,rtl8392-spi" },
-+ { .compatible = "realtek,rtl8393-spi" },
-+ { /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, realtek_rtl_spi_of_ids);
-+
-+static struct platform_driver realtek_rtl_spi_driver = {
-+ .probe = realtek_rtl_spi_probe,
-+ .driver = {
-+ .name = "realtek-rtl-spi",
-+ .of_match_table = realtek_rtl_spi_of_ids,
-+ },
-+};
-+
-+module_platform_driver(realtek_rtl_spi_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Bert Vermeulen <bert at biot.com>");
-+MODULE_DESCRIPTION("Realtek RTL SPI driver");
diff --git a/target/linux/realtek/patches-5.15/005-5.12-dt-bindings-interrupt-controller-add-realtek-rtl838x-rtl839x-support.patch b/target/linux/realtek/patches-5.15/005-5.12-dt-bindings-interrupt-controller-add-realtek-rtl838x-rtl839x-support.patch
deleted file mode 100644
index 165545a220..0000000000
--- a/target/linux/realtek/patches-5.15/005-5.12-dt-bindings-interrupt-controller-add-realtek-rtl838x-rtl839x-support.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 4a2b92a5d3519fc2c1edda4d4aa0e05bff41e8de Mon Sep 17 00:00:00 2001
-From: Bert Vermeulen <bert at biot.com>
-Date: Fri, 22 Jan 2021 21:42:23 +0100
-Subject: dt-bindings: interrupt-controller: Add Realtek RTL838x/RTL839x
- support
-
-Document the binding for the Realtek RTL838x/RTL839x interrupt controller.
-
-Reviewed-by: Rob Herring <robh at kernel.org>
-Signed-off-by: Bert Vermeulen <bert at biot.com>
-[maz: Add a commit message, as the author couldn't be bothered...]
-Signed-off-by: Marc Zyngier <maz at kernel.org>
-Link: https://lore.kernel.org/r/20210122204224.509124-2-bert@biot.com
----
- .../interrupt-controller/realtek,rtl-intc.yaml | 57 ++++++++++++++++++++++
- 1 file changed, 57 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
-@@ -0,0 +1,57 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/interrupt-controller/realtek,rtl-intc.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Realtek RTL SoC interrupt controller devicetree bindings
-+
-+maintainers:
-+ - Birger Koblitz <mail at birger-koblitz.de>
-+ - Bert Vermeulen <bert at biot.com>
-+ - John Crispin <john at phrozen.org>
-+
-+properties:
-+ compatible:
-+ const: realtek,rtl-intc
-+
-+ "#interrupt-cells":
-+ const: 1
-+
-+ reg:
-+ maxItems: 1
-+
-+ interrupts:
-+ maxItems: 1
-+
-+ interrupt-controller: true
-+
-+ "#address-cells":
-+ const: 0
-+
-+ interrupt-map:
-+ description: Describes mapping from SoC interrupts to CPU interrupts
-+
-+required:
-+ - compatible
-+ - reg
-+ - "#interrupt-cells"
-+ - interrupt-controller
-+ - "#address-cells"
-+ - interrupt-map
-+
-+additionalProperties: false
-+
-+examples:
-+ - |
-+ intc: interrupt-controller at 3000 {
-+ compatible = "realtek,rtl-intc";
-+ #interrupt-cells = <1>;
-+ interrupt-controller;
-+ reg = <0x3000 0x20>;
-+ #address-cells = <0>;
-+ interrupt-map =
-+ <31 &cpuintc 2>,
-+ <30 &cpuintc 1>,
-+ <29 &cpuintc 5>;
-+ };
diff --git a/target/linux/realtek/patches-5.15/006-5.12-irqchip-add-support-for-realtek-rtl838x-rtl839x-interrupt-controller.patch b/target/linux/realtek/patches-5.15/006-5.12-irqchip-add-support-for-realtek-rtl838x-rtl839x-interrupt-controller.patch
deleted file mode 100644
index 753c41eb2f..0000000000
--- a/target/linux/realtek/patches-5.15/006-5.12-irqchip-add-support-for-realtek-rtl838x-rtl839x-interrupt-controller.patch
+++ /dev/null
@@ -1,211 +0,0 @@
-From 9f3a0f34b84ad1b9a8f2bdae44b66f16685b2143 Mon Sep 17 00:00:00 2001
-From: Bert Vermeulen <bert at biot.com>
-Date: Fri, 22 Jan 2021 21:42:24 +0100
-Subject: irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller
-
-This is a standard IRQ driver with only status and mask registers.
-
-The mapping from SoC interrupts (18-31) to MIPS core interrupts is
-done via an interrupt-map in device tree.
-
-Signed-off-by: Bert Vermeulen <bert at biot.com>
-Signed-off-by: Birger Koblitz <mail at birger-koblitz.de>
-Acked-by: John Crispin <john at phrozen.org>
-Signed-off-by: Marc Zyngier <maz at kernel.org>
-Link: https://lore.kernel.org/r/20210122204224.509124-3-bert@biot.com
----
- drivers/irqchip/Makefile | 1 +
- drivers/irqchip/irq-realtek-rtl.c | 180 ++++++++++++++++++++++++++++++++++++++
- 2 files changed, 181 insertions(+)
- create mode 100644 drivers/irqchip/irq-realtek-rtl.c
-
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -114,3 +114,4 @@ obj-$(CONFIG_LOONGSON_PCH_PIC) += irq-l
- obj-$(CONFIG_LOONGSON_PCH_MSI) += irq-loongson-pch-msi.o
- obj-$(CONFIG_MST_IRQ) += irq-mst-intc.o
- obj-$(CONFIG_SL28CPLD_INTC) += irq-sl28cpld.o
-+obj-$(CONFIG_MACH_REALTEK_RTL) += irq-realtek-rtl.o
---- /dev/null
-+++ b/drivers/irqchip/irq-realtek-rtl.c
-@@ -0,0 +1,180 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (C) 2020 Birger Koblitz <mail at birger-koblitz.de>
-+ * Copyright (C) 2020 Bert Vermeulen <bert at biot.com>
-+ * Copyright (C) 2020 John Crispin <john at phrozen.org>
-+ */
-+
-+#include <linux/of_irq.h>
-+#include <linux/irqchip.h>
-+#include <linux/spinlock.h>
-+#include <linux/of_address.h>
-+#include <linux/irqchip/chained_irq.h>
-+
-+/* Global Interrupt Mask Register */
-+#define RTL_ICTL_GIMR 0x00
-+/* Global Interrupt Status Register */
-+#define RTL_ICTL_GISR 0x04
-+/* Interrupt Routing Registers */
-+#define RTL_ICTL_IRR0 0x08
-+#define RTL_ICTL_IRR1 0x0c
-+#define RTL_ICTL_IRR2 0x10
-+#define RTL_ICTL_IRR3 0x14
-+
-+#define REG(x) (realtek_ictl_base + x)
-+
-+static DEFINE_RAW_SPINLOCK(irq_lock);
-+static void __iomem *realtek_ictl_base;
-+
-+static void realtek_ictl_unmask_irq(struct irq_data *i)
-+{
-+ unsigned long flags;
-+ u32 value;
-+
-+ raw_spin_lock_irqsave(&irq_lock, flags);
-+
-+ value = readl(REG(RTL_ICTL_GIMR));
-+ value |= BIT(i->hwirq);
-+ writel(value, REG(RTL_ICTL_GIMR));
-+
-+ raw_spin_unlock_irqrestore(&irq_lock, flags);
-+}
-+
-+static void realtek_ictl_mask_irq(struct irq_data *i)
-+{
-+ unsigned long flags;
-+ u32 value;
-+
-+ raw_spin_lock_irqsave(&irq_lock, flags);
-+
-+ value = readl(REG(RTL_ICTL_GIMR));
-+ value &= ~BIT(i->hwirq);
-+ writel(value, REG(RTL_ICTL_GIMR));
-+
-+ raw_spin_unlock_irqrestore(&irq_lock, flags);
-+}
-+
-+static struct irq_chip realtek_ictl_irq = {
-+ .name = "realtek-rtl-intc",
-+ .irq_mask = realtek_ictl_mask_irq,
-+ .irq_unmask = realtek_ictl_unmask_irq,
-+};
-+
-+static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+ irq_set_chip_and_handler(hw, &realtek_ictl_irq, handle_level_irq);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops irq_domain_ops = {
-+ .map = intc_map,
-+ .xlate = irq_domain_xlate_onecell,
-+};
-+
-+static void realtek_irq_dispatch(struct irq_desc *desc)
-+{
-+ struct irq_chip *chip = irq_desc_get_chip(desc);
-+ struct irq_domain *domain;
-+ unsigned int pending;
-+
-+ chained_irq_enter(chip, desc);
-+ pending = readl(REG(RTL_ICTL_GIMR)) & readl(REG(RTL_ICTL_GISR));
-+ if (unlikely(!pending)) {
-+ spurious_interrupt();
-+ goto out;
-+ }
-+ domain = irq_desc_get_handler_data(desc);
-+ generic_handle_irq(irq_find_mapping(domain, __ffs(pending)));
-+
-+out:
-+ chained_irq_exit(chip, desc);
-+}
-+
-+/*
-+ * SoC interrupts are cascaded to MIPS CPU interrupts according to the
-+ * interrupt-map in the device tree. Each SoC interrupt gets 4 bits for
-+ * the CPU interrupt in an Interrupt Routing Register. Max 32 SoC interrupts
-+ * thus go into 4 IRRs.
-+ */
-+static int __init map_interrupts(struct device_node *node, struct irq_domain *domain)
-+{
-+ struct device_node *cpu_ictl;
-+ const __be32 *imap;
-+ u32 imaplen, soc_int, cpu_int, tmp, regs[4];
-+ int ret, i, irr_regs[] = {
-+ RTL_ICTL_IRR3,
-+ RTL_ICTL_IRR2,
-+ RTL_ICTL_IRR1,
-+ RTL_ICTL_IRR0,
-+ };
-+ u8 mips_irqs_set;
-+
-+ ret = of_property_read_u32(node, "#address-cells", &tmp);
-+ if (ret || tmp)
-+ return -EINVAL;
-+
-+ imap = of_get_property(node, "interrupt-map", &imaplen);
-+ if (!imap || imaplen % 3)
-+ return -EINVAL;
-+
-+ mips_irqs_set = 0;
-+ memset(regs, 0, sizeof(regs));
-+ for (i = 0; i < imaplen; i += 3 * sizeof(u32)) {
-+ soc_int = be32_to_cpup(imap);
-+ if (soc_int > 31)
-+ return -EINVAL;
-+
-+ cpu_ictl = of_find_node_by_phandle(be32_to_cpup(imap + 1));
-+ if (!cpu_ictl)
-+ return -EINVAL;
-+ ret = of_property_read_u32(cpu_ictl, "#interrupt-cells", &tmp);
-+ if (ret || tmp != 1)
-+ return -EINVAL;
-+ of_node_put(cpu_ictl);
-+
-+ cpu_int = be32_to_cpup(imap + 2);
-+ if (cpu_int > 7)
-+ return -EINVAL;
-+
-+ if (!(mips_irqs_set & BIT(cpu_int))) {
-+ irq_set_chained_handler_and_data(cpu_int, realtek_irq_dispatch,
-+ domain);
-+ mips_irqs_set |= BIT(cpu_int);
-+ }
-+
-+ regs[(soc_int * 4) / 32] |= cpu_int << (soc_int * 4) % 32;
-+ imap += 3;
-+ }
-+
-+ for (i = 0; i < 4; i++)
-+ writel(regs[i], REG(irr_regs[i]));
-+
-+ return 0;
-+}
-+
-+static int __init realtek_rtl_of_init(struct device_node *node, struct device_node *parent)
-+{
-+ struct irq_domain *domain;
-+ int ret;
-+
-+ realtek_ictl_base = of_iomap(node, 0);
-+ if (!realtek_ictl_base)
-+ return -ENXIO;
-+
-+ /* Disable all cascaded interrupts */
-+ writel(0, REG(RTL_ICTL_GIMR));
-+
-+ domain = irq_domain_add_simple(node, 32, 0,
-+ &irq_domain_ops, NULL);
-+
-+ ret = map_interrupts(node, domain);
-+ if (ret) {
-+ pr_err("invalid interrupt map\n");
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+IRQCHIP_DECLARE(realtek_rtl_intc, "realtek,rtl-intc", realtek_rtl_of_init);
More information about the lede-commits
mailing list