[openwrt/openwrt] bcm53xx: backport DT changes from 5.17 & 5.18
LEDE Commits
lede-commits at lists.infradead.org
Sun Dec 4 03:07:41 PST 2022
rmilecki pushed a commit to openwrt/openwrt.git, branch openwrt-21.02:
https://git.openwrt.org/93ebd966fee4e459d2ddd897cf6d03b2afdad32d
commit 93ebd966fee4e459d2ddd897cf6d03b2afdad32d
Author: Rafał Miłecki <rafal at milecki.pl>
AuthorDate: Wed Mar 30 16:05:55 2022 +0200
bcm53xx: backport DT changes from 5.17 & 5.18
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
(cherry picked from commit a721fb9f839b3ca71da275a1c99620ef9342fb28)
---
...301X-use-non-deprecated-USB-2.0-PHY-bind.patch} | 4 +-
...ARM-dts-NSP-Fixed-iProc-PCIe-MSI-sub-node.patch | 42 ++++++++
...17-0008-ARM-dts-NSP-Rename-SATA-unit-name.patch | 25 +++++
...5301X-correct-RX-delay-and-enable-flow-co.patch | 45 +++++++++
...dts-BCM5301X-define-RTL8365MB-switch-on-A.patch | 109 +++++++++++++++++++++
...5301X-define-RTL8365MB-switch-on-Asus-RT-.patch | 103 +++++++++++++++++++
...-dts-NSP-MX6X-get-mac-address-from-eeprom.patch | 40 ++++++++
...M-dts-NSP-MX6X-correct-LED-function-types.patch | 62 ++++++++++++
...5301X-Add-Ethernet-MAC-address-to-Luxul-X.patch | 42 ++++++++
9 files changed, 471 insertions(+), 1 deletion(-)
diff --git a/target/linux/bcm53xx/patches-5.4/130-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch b/target/linux/bcm53xx/patches-5.4/038-v5.17-0006-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch
similarity index 89%
rename from target/linux/bcm53xx/patches-5.4/130-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch
rename to target/linux/bcm53xx/patches-5.4/038-v5.17-0006-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch
index e50bcd9f25..e01927bedf 100644
--- a/target/linux/bcm53xx/patches-5.4/130-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch
+++ b/target/linux/bcm53xx/patches-5.4/038-v5.17-0006-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch
@@ -1,5 +1,6 @@
+From 1a46061a2a4130a08841941ce6dcaa32be2ce312 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Tue, 23 Nov 2021 09:55:06 +0100
+Date: Tue, 23 Nov 2021 10:03:33 +0100
Subject: [PATCH] ARM: dts: BCM5301X: use non-deprecated USB 2.0 PHY binding
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
@@ -10,6 +11,7 @@ register.
References: 55b9b741712d ("dt-bindings: phy: brcm,ns-usb2-phy: bind just a PHY block")
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/target/linux/bcm53xx/patches-5.4/038-v5.17-0007-ARM-dts-NSP-Fixed-iProc-PCIe-MSI-sub-node.patch b/target/linux/bcm53xx/patches-5.4/038-v5.17-0007-ARM-dts-NSP-Fixed-iProc-PCIe-MSI-sub-node.patch
new file mode 100644
index 0000000000..730b989808
--- /dev/null
+++ b/target/linux/bcm53xx/patches-5.4/038-v5.17-0007-ARM-dts-NSP-Fixed-iProc-PCIe-MSI-sub-node.patch
@@ -0,0 +1,42 @@
+From 69c4e53bdd055ecc27761f6971a50c631ff9072e Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli at gmail.com>
+Date: Thu, 2 Dec 2021 15:16:27 -0800
+Subject: [PATCH] ARM: dts: NSP: Fixed iProc PCIe MSI sub-node
+
+Rename the msi controller unit name to 'msi' to avoid collisions with
+the 'msi-controller' boolean property.
+
+Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
+---
+ arch/arm/boot/dts/bcm-nsp.dtsi | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm-nsp.dtsi
++++ b/arch/arm/boot/dts/bcm-nsp.dtsi
+@@ -587,7 +587,7 @@
+ status = "disabled";
+
+ msi-parent = <&msi0>;
+- msi0: msi-controller {
++ msi0: msi {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+@@ -624,7 +624,7 @@
+ status = "disabled";
+
+ msi-parent = <&msi1>;
+- msi1: msi-controller {
++ msi1: msi {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+@@ -661,7 +661,7 @@
+ status = "disabled";
+
+ msi-parent = <&msi2>;
+- msi2: msi-controller {
++ msi2: msi {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
diff --git a/target/linux/bcm53xx/patches-5.4/038-v5.17-0008-ARM-dts-NSP-Rename-SATA-unit-name.patch b/target/linux/bcm53xx/patches-5.4/038-v5.17-0008-ARM-dts-NSP-Rename-SATA-unit-name.patch
new file mode 100644
index 0000000000..fd90fbf1f6
--- /dev/null
+++ b/target/linux/bcm53xx/patches-5.4/038-v5.17-0008-ARM-dts-NSP-Rename-SATA-unit-name.patch
@@ -0,0 +1,25 @@
+From 9a68c53f875e88edd3403c001ad85f4ac0ed3486 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli at gmail.com>
+Date: Tue, 7 Dec 2021 10:19:09 -0800
+Subject: [PATCH] ARM: dts: NSP: Rename SATA unit name
+
+Rename the SATA controller unit name from ahci to sata in preparation
+for adding the Broadcom SATA3 controller YAML binding which will bring
+validation.
+
+Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
+---
+ arch/arm/boot/dts/bcm-nsp.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/bcm-nsp.dtsi
++++ b/arch/arm/boot/dts/bcm-nsp.dtsi
+@@ -534,7 +534,7 @@
+ };
+ };
+
+- sata: ahci at 41000 {
++ sata: sata at 41000 {
+ compatible = "brcm,bcm-nsp-ahci";
+ reg-names = "ahci", "top-ctrl";
+ reg = <0x41000 0x1000>, <0x40020 0x1c>;
diff --git a/target/linux/bcm53xx/patches-5.4/038-v5.17-0009-ARM-dts-BCM5301X-correct-RX-delay-and-enable-flow-co.patch b/target/linux/bcm53xx/patches-5.4/038-v5.17-0009-ARM-dts-BCM5301X-correct-RX-delay-and-enable-flow-co.patch
new file mode 100644
index 0000000000..e81ec169b9
--- /dev/null
+++ b/target/linux/bcm53xx/patches-5.4/038-v5.17-0009-ARM-dts-BCM5301X-correct-RX-delay-and-enable-flow-co.patch
@@ -0,0 +1,45 @@
+From 5e33f1c4a7cb914a003a304ab8eef705b17aabb7 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal at arinc9.com>
+Date: Fri, 17 Dec 2021 00:03:19 +0800
+Subject: [PATCH] ARM: dts: BCM5301X: correct RX delay and enable flow control
+ on Asus RT-AC88U
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The current 'rx-internal-delay-ps' property value on the Realtek switch
+node, 2000, will be divided by 300, resulting in 6.66, which will be
+rounded to the closest step value, 7. Change it to 2100 to be accurate.
+See ef136837aaf6 ("net: dsa: rtl8365mb: set RGMII RX delay in steps of
+0.3 ns") for reference.
+
+Flow control needs to be enabled on both sides of the internal and
+external switch. It is already enabled on the CPU port of the Realtek
+switch so we also enable it on the external switch port of the Broadcom
+switch as well.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
+Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
+---
+ arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+@@ -138,7 +138,7 @@
+ ethernet = <&sw0_p5>;
+ phy-mode = "rgmii";
+ tx-internal-delay-ps = <2000>;
+- rx-internal-delay-ps = <2000>;
++ rx-internal-delay-ps = <2100>;
+
+ fixed-link {
+ speed = <1000>;
+@@ -213,6 +213,7 @@
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
++ pause;
+ };
+ };
+
diff --git a/target/linux/bcm53xx/patches-5.4/038-v5.17-0010-Revert-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-A.patch b/target/linux/bcm53xx/patches-5.4/038-v5.17-0010-Revert-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-A.patch
new file mode 100644
index 0000000000..3d814b1252
--- /dev/null
+++ b/target/linux/bcm53xx/patches-5.4/038-v5.17-0010-Revert-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-A.patch
@@ -0,0 +1,109 @@
+From 8b0c59c622dc4dab970ec63264fb5b152944ac80 Mon Sep 17 00:00:00 2001
+From: Arnd Bergmann <arnd at arndb.de>
+Date: Thu, 23 Dec 2021 00:17:17 +0100
+Subject: [PATCH] Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus
+ RT-AC88U"
+
+This reverts commit 3d2d52a0d1835b56f6bd67d268f6c39df0e41692, it caused
+a build regression:
+
+arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:109.4-14: Warning (reg_format): /switch/ports:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
+arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
+arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
+arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
+arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
+arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #address-cells value
+arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #size-cells value
+
+Reported-by: Stephen Rothwell <sfr at canb.auug.org.au>
+Signed-off-by: Arnd Bergmann <arnd at arndb.de>
+---
+ arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 77 --------------------
+ 1 file changed, 77 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+@@ -93,83 +93,6 @@
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+-
+- switch {
+- compatible = "realtek,rtl8365mb";
+- /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
+- mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+- mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+- reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+- realtek,disable-leds;
+- dsa,member = <1 0>;
+-
+- ports {
+- #address-cells = <1>;
+- #size-cells = <0>;
+- reg = <0>;
+-
+- port at 0 {
+- reg = <0>;
+- label = "lan5";
+- phy-handle = <ðphy0>;
+- };
+-
+- port at 1 {
+- reg = <1>;
+- label = "lan6";
+- phy-handle = <ðphy1>;
+- };
+-
+- port at 2 {
+- reg = <2>;
+- label = "lan7";
+- phy-handle = <ðphy2>;
+- };
+-
+- port at 3 {
+- reg = <3>;
+- label = "lan8";
+- phy-handle = <ðphy3>;
+- };
+-
+- port at 6 {
+- reg = <6>;
+- label = "cpu";
+- ethernet = <&sw0_p5>;
+- phy-mode = "rgmii";
+- tx-internal-delay-ps = <2000>;
+- rx-internal-delay-ps = <2100>;
+-
+- fixed-link {
+- speed = <1000>;
+- full-duplex;
+- pause;
+- };
+- };
+- };
+-
+- mdio {
+- compatible = "realtek,smi-mdio";
+- #address-cells = <1>;
+- #size-cells = <0>;
+-
+- ethphy0: ethernet-phy at 0 {
+- reg = <0>;
+- };
+-
+- ethphy1: ethernet-phy at 1 {
+- reg = <1>;
+- };
+-
+- ethphy2: ethernet-phy at 2 {
+- reg = <2>;
+- };
+-
+- ethphy3: ethernet-phy at 3 {
+- reg = <3>;
+- };
+- };
+- };
+ };
+
+ &srab {
diff --git a/target/linux/bcm53xx/patches-5.4/039-v5.18-0001-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch b/target/linux/bcm53xx/patches-5.4/039-v5.18-0001-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch
new file mode 100644
index 0000000000..77d3420ff8
--- /dev/null
+++ b/target/linux/bcm53xx/patches-5.4/039-v5.18-0001-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch
@@ -0,0 +1,103 @@
+From 441d531ec9b766f49e01c107a3043235daa4493f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal at arinc9.com>
+Date: Sun, 2 Jan 2022 23:33:04 +0300
+Subject: [PATCH] ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Define the Realtek RTL8365MB switch without interrupt support on the device
+tree of Asus RT-AC88U.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
+Acked-by: Alvin Šipraga <alsi at bang-olufsen.dk>
+Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
+---
+ arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 76 ++++++++++++++++++++
+ 1 file changed, 76 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+@@ -93,6 +93,82 @@
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+ };
++
++ switch {
++ compatible = "realtek,rtl8365mb";
++ /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
++ mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
++ mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
++ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++ realtek,disable-leds;
++ dsa,member = <1 0>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port at 0 {
++ reg = <0>;
++ label = "lan5";
++ phy-handle = <ðphy0>;
++ };
++
++ port at 1 {
++ reg = <1>;
++ label = "lan6";
++ phy-handle = <ðphy1>;
++ };
++
++ port at 2 {
++ reg = <2>;
++ label = "lan7";
++ phy-handle = <ðphy2>;
++ };
++
++ port at 3 {
++ reg = <3>;
++ label = "lan8";
++ phy-handle = <ðphy3>;
++ };
++
++ port at 6 {
++ reg = <6>;
++ label = "cpu";
++ ethernet = <&sw0_p5>;
++ phy-mode = "rgmii";
++ tx-internal-delay-ps = <2000>;
++ rx-internal-delay-ps = <2100>;
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ pause;
++ };
++ };
++ };
++
++ mdio {
++ compatible = "realtek,smi-mdio";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ ethphy0: ethernet-phy at 0 {
++ reg = <0>;
++ };
++
++ ethphy1: ethernet-phy at 1 {
++ reg = <1>;
++ };
++
++ ethphy2: ethernet-phy at 2 {
++ reg = <2>;
++ };
++
++ ethphy3: ethernet-phy at 3 {
++ reg = <3>;
++ };
++ };
++ };
+ };
+
+ &srab {
diff --git a/target/linux/bcm53xx/patches-5.4/039-v5.18-0002-ARM-dts-NSP-MX6X-get-mac-address-from-eeprom.patch b/target/linux/bcm53xx/patches-5.4/039-v5.18-0002-ARM-dts-NSP-MX6X-get-mac-address-from-eeprom.patch
new file mode 100644
index 0000000000..19cf1fe952
--- /dev/null
+++ b/target/linux/bcm53xx/patches-5.4/039-v5.18-0002-ARM-dts-NSP-MX6X-get-mac-address-from-eeprom.patch
@@ -0,0 +1,40 @@
+From 66848aff05f669e95795b5f3a163f4762781333e Mon Sep 17 00:00:00 2001
+From: Matthew Hagan <mnhagan88 at gmail.com>
+Date: Wed, 23 Feb 2022 23:50:39 +0000
+Subject: [PATCH] ARM: dts: NSP: MX6X: get mac-address from eeprom
+
+The MAC address on the MX64/MX65 series is located on the AT24 EEPROM.
+This is the same as other Meraki devices such as the MR32 [1].
+
+[1] https://lore.kernel.org/linux-arm-kernel/fa8271d02ef74a687f365cebe5c55ec846963ab7.1631986106.git.chunkeey@gmail.com/
+
+Signed-off-by: Matthew Hagan <mnhagan88 at gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
+---
+ arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
++++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
+@@ -39,6 +39,8 @@
+
+ &amac2 {
+ status = "okay";
++ nvmem-cells = <&mac_address>;
++ nvmem-cell-names = "mac-address";
+ };
+
+ &ehci0 {
+@@ -53,6 +55,12 @@
+ reg = <0x50>;
+ pagesize = <32>;
+ read-only;
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ mac_address: mac-address at 66 {
++ reg = <0x66 0x6>;
++ };
+ };
+ };
+
diff --git a/target/linux/bcm53xx/patches-5.4/039-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch b/target/linux/bcm53xx/patches-5.4/039-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch
new file mode 100644
index 0000000000..2da45ff9da
--- /dev/null
+++ b/target/linux/bcm53xx/patches-5.4/039-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch
@@ -0,0 +1,62 @@
+From 482c85c7fc95c572d368b2214b9e9d2c4a2e5789 Mon Sep 17 00:00:00 2001
+From: Matthew Hagan <mnhagan88 at gmail.com>
+Date: Wed, 23 Feb 2022 23:50:40 +0000
+Subject: [PATCH] ARM: dts: NSP: MX6X: correct LED function types
+
+Currently, the amber LED will remain always on. This is due to a
+misinterpretation of the LED sub-node properties, where-by "default-state"
+was used to indicate the initial state when powering on the device. When in
+use, however, this resulted in the amber LED always being on. Instead change
+this to only indicate a fault state.
+
+Assign LED_FUNCTION_POWER to the green PWM LED.
+
+These changes bring the MX64/65 in line with the MR32's devicetree.
+
+Signed-off-by: Matthew Hagan <mnhagan88 at gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
+---
+ arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 3 +--
+ arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi | 3 +--
+ arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi | 2 +-
+ 3 files changed, 3 insertions(+), 5 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
++++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+@@ -57,10 +57,9 @@
+
+ led-4 {
+ /* amber:power */
+- function = LED_FUNCTION_POWER;
++ function = LED_FUNCTION_FAULT;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
+- default-state = "on";
+ };
+
+ led-5 {
+--- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
++++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
+@@ -106,10 +106,9 @@
+
+ led-a {
+ /* amber:power */
+- function = LED_FUNCTION_POWER;
++ function = LED_FUNCTION_FAULT;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
+- default-state = "on";
+ };
+
+ led-b {
+--- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
++++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
+@@ -22,7 +22,7 @@
+ };
+
+ led-2 {
+- function = LED_FUNCTION_INDICATOR;
++ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ pwms = <&pwm 2 50000>;
+ max-brightness = <255>;
diff --git a/target/linux/bcm53xx/patches-5.4/039-v5.18-0004-ARM-dts-BCM5301X-Add-Ethernet-MAC-address-to-Luxul-X.patch b/target/linux/bcm53xx/patches-5.4/039-v5.18-0004-ARM-dts-BCM5301X-Add-Ethernet-MAC-address-to-Luxul-X.patch
new file mode 100644
index 0000000000..c70fbc398b
--- /dev/null
+++ b/target/linux/bcm53xx/patches-5.4/039-v5.18-0004-ARM-dts-BCM5301X-Add-Ethernet-MAC-address-to-Luxul-X.patch
@@ -0,0 +1,42 @@
+From c8442f0fb09ca3d842b9b23d1d0650f649fd10f8 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
+Date: Mon, 28 Feb 2022 10:52:07 +0100
+Subject: [PATCH] ARM: dts: BCM5301X: Add Ethernet MAC address to Luxul
+ XWR-3150
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Luxul XWR-3150 stores MAC as NVRAM variable. Add NVMEM cell for it and
+reference it in the Ethernet interface node.
+
+Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
+---
+ arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+@@ -25,6 +25,9 @@
+ nvram at 1eff0000 {
+ compatible = "brcm,nvram";
+ reg = <0x1eff0000 0x10000>;
++
++ et0macaddr: et0macaddr {
++ };
+ };
+
+ leds {
+@@ -72,6 +75,11 @@
+ };
+ };
+
++&gmac0 {
++ nvmem-cells = <&et0macaddr>;
++ nvmem-cell-names = "mac-address";
++};
++
+ &usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ };
More information about the lede-commits
mailing list