[openwrt/openwrt] ramips: add support for YunCore AX820/HWAP-AX820
LEDE Commits
lede-commits at lists.infradead.org
Sat Aug 27 23:21:30 PDT 2022
ynezz pushed a commit to openwrt/openwrt.git, branch openwrt-21.02:
https://git.openwrt.org/32101669db23a30a7ed1b84da87136802e94edf9
commit 32101669db23a30a7ed1b84da87136802e94edf9
Author: Clemens Hopfer <openwrt at wireloss.net>
AuthorDate: Thu Jul 22 17:54:15 2021 +0200
ramips: add support for YunCore AX820/HWAP-AX820
There are two versions which are identical apart from the enclosure:
YunCore AX820: indoor ceiling mount AP with integrated antennas
YunCore HWAP-AX820: outdoor enclosure with external (N) connectors
Hardware specs:
SoC: MediaTek MT7621DAT
Flash: 16 MiB SPI NOR
RAM: 128MiB (DDR3, integrated)
WiFi: MT7905DAN+MT7975DN 2.4/5GHz 2T2R 802.11ax
Ethernet: 10/100/1000 Mbps x2 (WAN/PoE+LAN)
LED: Status (green)
Button: Reset
Power: 802.11af/at PoE; DC 12V,1A
Antennas: AX820(indoor): 4dBi internal; HWAP-AX820(outdoor): external
Flash instructions:
The "OpenWRT support" version of the AX820 comes with a LEDE-based
firmware with proprietary MTK drivers and a luci webinterface and
ssh accessible under 192.168.1.1 on LAN; user root, no password.
The sysupgrade.bin can be flashed using luci or sysupgrade via ssh,
you will have to force the upgrade due to a different factory name.
Remember: Do *not* preserve factory configuration!
MAC addresses as used by OEM firmware:
use address source
2g 44:D1:FA:*:0b Factory 0x0004 (label)
5g 46:D1:FA:*:0b LAA of 2g
lan 44:D1:FA:*:0c Factory 0xe000
wan 44:D1:FA:*:0d Factory 0xe000 + 1
The wan MAC can also be found in 0xe006 but is not used by OEM dtb.
Due to different MAC handling in mt76 the LAA derived from lan is used
for 2g to prevent duplicate MACs when creating multiple interfaces.
Signed-off-by: Clemens Hopfer <openwrt at wireloss.net>
(cherry picked from commit 4891b865380e2b7f32acf0893df9c1ca9db8d4ea)
[switch to mtd-mac-address instead of nvmem-cells]
---
package/boot/uboot-envtools/files/ramips | 3 +-
target/linux/ramips/dts/mt7621_yuncore_ax820.dts | 133 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 9 ++
.../mt7621/base-files/etc/board.d/02_network | 4 +
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 4 +
5 files changed, 152 insertions(+), 1 deletion(-)
diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips
index 8d3ae88b48..3e358ec6ac 100644
--- a/package/boot/uboot-envtools/files/ramips
+++ b/package/boot/uboot-envtools/files/ramips
@@ -24,7 +24,8 @@ sitecom,wlr-4100-v1-002)
;;
allnet,all0256n-4m|\
allnet,all0256n-8m|\
-allnet,all5002)
+allnet,all5002|\
+yuncore,ax820)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
;;
ampedwireless,ally-00x19k|\
diff --git a/target/linux/ramips/dts/mt7621_yuncore_ax820.dts b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts
new file mode 100644
index 0000000000..9775ec3572
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "yuncore,ax820", "mediatek,mt7621-soc";
+ model = "YunCore AX820";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_green;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_green;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ hw_margin_ms = <200>;
+ always-running;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "Bootloader";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "Config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ /* range 0x40000 to 0x50000 is empty in vendor
+ * firmware, so we do not use it either
+ */
+
+ factory: partition at 50000 {
+ label = "Factory";
+ reg = <0x50000 0x40000>;
+ read-only;
+ };
+
+ partition at 90000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x90000 0xf70000>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie1 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ };
+};
+
+&gmac0 {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+&switch0 {
+ ports {
+ port at 0 {
+ status = "okay";
+ label = "wan";
+ mtd-mac-address = <&factory 0xe000>;
+ mtd-mac-address-increment = <1>;
+ };
+
+ port at 1 {
+ status = "okay";
+ label = "lan";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "jtag", "wdt";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 8ee2a020bb..c62087d870 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -1567,6 +1567,15 @@ define Device/youku_yk-l2
endef
TARGET_DEVICES += youku_yk-l2
+define Device/yuncore_ax820
+ $(Device/dsa-migration)
+ IMAGE_SIZE := 15808k
+ DEVICE_VENDOR := YunCore
+ DEVICE_MODEL := AX820
+ DEVICE_PACKAGES := kmod-mt7915e
+endef
+TARGET_DEVICES += yuncore_ax820
+
define Device/zbtlink_zbt-we1326
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 4b44669b84..4d081bed8c 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -68,6 +68,7 @@ ramips_setup_interfaces()
ubnt,edgerouter-x-sfp)
ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
;;
+ yuncore,ax820|\
zyxel,nr7101)
ucidef_set_interfaces_lan_wan "lan" "wan"
;;
@@ -157,6 +158,9 @@ ramips_setup_macs()
wan_mac=$label_mac
lan_mac=$(macaddr_add $label_mac 1)
;;
+ yuncore,ax820)
+ label_mac=$(mtd_get_mac_binary Factory 0x4)
+ ;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index bd0f0254c6..68ee537ae5 100644
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -27,4 +27,8 @@ case "$board" in
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
;;
+ yuncore,ax820)
+ [ "$PHYNBR" = "1" ] && \
+ macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress
+ ;;
esac
More information about the lede-commits
mailing list