[openwrt/openwrt] ramips: add support for Beeline SmartBox TURBO
LEDE Commits
lede-commits at lists.infradead.org
Sat Aug 13 11:55:14 PDT 2022
hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/85b41cbd3b8e98393232b5f619dcc7378652fbd8
commit 85b41cbd3b8e98393232b5f619dcc7378652fbd8
Author: Mikhail Zhilkin <csharper2005 at gmail.com>
AuthorDate: Fri Mar 18 18:09:45 2022 +0000
ramips: add support for Beeline SmartBox TURBO
Beeline SmartBox TURBO is a wireless WiFi 5 router manufactured by
Sercomm company.
Device specification
--------------------
SoC Type: MediaTek MT7621AT
RAM: 256 MiB
Flash: 256 MiB, Micron MT29F2G08ABAGA3W
Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2
Wireless 5 GHz (MT7615E): a/n/ac, 4x4
Ethernet: 5xGbE (WAN, LAN1, LAN2, LAN3, LAN4)
USB ports: 1xUSB3.0
Button: 2 buttons (Reset & WPS)
LEDs: 1 RGB LED
Power: 12 VDC, 1.5 A
Connector type: barrel
Bootloader: U-Boot
Installation
-----------------
1. Login to the router web interface (admin:admin)
2. Navigate to Settings -> WAN -> Add static IP interface (e.g.
10.0.0.1/255.255.255.0)
3. Navigate to Settings -> Remote cotrol -> Add SSH, port 22,
10.0.0.0/255.255.255.0 and interface created before
4. Change IP of your client to 10.0.0.2/255.255.255.0 and connect the
ethernet cable to the WAN port of the router
5. Connect to the router using SSH shell (SuperUser:SNxxxxxxxxxx, where
SNxxxxxxxxxx is the serial number from the backplate label)
6. Run in SSH shell:
sh
7. Make a mtd backup (optional, see related section)
8. Change bootflag to Sercomm1 and reboot:
printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
reboot
9. Login to the router web interface (admin:admin)
10. Remove dots from the OpenWrt factory image filename
11. Update firmware via web using OpenWrt factory image
Revert to stock
---------------
1. Change bootflag to Sercomm1 in OpenWrt CLI and then reboot:
printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
2. Optional: Update with any stock (Beeline) firmware if you want to
overwrite OpenWrt in Slot 0 completely.
mtd backup
----------
1. Set up a tftp server (e.g. tftpd64 for windows)
2. Connect to a router using SSH shell and run the following commands:
cd /tmp
for i in 0 1 2 3 4 5 6 7 8 9 10; do nanddump -f mtd$i /dev/mtd$i; \
tftp -l mtd$i -p 10.0.0.2; md5sum mtd$i >> mtd.md5; rm mtd$i; done
tftp -l mtd.md5 -p 10.0.0.2
MAC Addresses
-------------
+-----+-----------+---------+
| use | address | example |
+-----+-----------+---------+
| LAN | label | *:54 |
| WAN | label + 1 | *:55 |
| 2g | label + 4 | *:58 |
| 5g | label + 5 | *:59 |
+-----+-----------+---------+
The label MAC address was found in Factory 0x21000
Co-developed-by: Maximilian Weinmann <x1 at disroot.org>
Signed-off-by: Maximilian Weinmann <x1 at disroot.org>
Signed-off-by: Mikhail Zhilkin <csharper2005 at gmail.com>
---
package/boot/uboot-envtools/files/ramips | 3 +-
.../ramips/dts/mt7621_beeline_smartbox-turbo.dts | 247 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 13 ++
.../ramips/mt7621/base-files/etc/board.d/01_leds | 3 +-
.../ramips/mt7621/base-files/etc/init.d/bootcount | 5 +
.../mt7621/base-files/lib/upgrade/platform.sh | 1 +
6 files changed, 270 insertions(+), 2 deletions(-)
diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips
index f7f4821cef..597baef6cd 100644
--- a/package/boot/uboot-envtools/files/ramips
+++ b/package/boot/uboot-envtools/files/ramips
@@ -31,7 +31,8 @@ ampedwireless,ally-00x19k|\
ampedwireless,ally-r1900k)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000" "4"
;;
-beeline,smartbox-giga)
+beeline,smartbox-giga|\
+beeline,smartbox-turbo)
ubootenv_add_uci_config "/dev/mtd0" "0x80000" "0x1000" "0x20000"
;;
buffalo,wsr-1166dhp|\
diff --git a/target/linux/ramips/dts/mt7621_beeline_smartbox-turbo.dts b/target/linux/ramips/dts/mt7621_beeline_smartbox-turbo.dts
new file mode 100644
index 0000000000..d987046a0f
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_beeline_smartbox-turbo.dts
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "beeline,smartbox-turbo", "mediatek,mt7621-soc";
+ model = "Beeline SmartBox TURBO";
+
+ aliases {
+ label-mac-device = &gmac0;
+
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-1 {
+ label = "blue:wan";
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WAN;
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_green: led-0 {
+ label = "green:status";
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_red: led-2 {
+ label = "red:status";
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ ubi-concat {
+ compatible = "mtd-concat";
+ devices = <&ubiconcat0 &ubiconcat1 &ubiconcat2 \
+ &ubiconcat3>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "ubi";
+ reg = <0x0 0xca00000>;
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "sercomm,sc-partitions", "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ sercomm,scpart-id = <0>;
+ read-only;
+ };
+
+ partition at 100000 {
+ label = "dynamic partition map";
+ reg = <0x100000 0x100000>;
+ sercomm,scpart-id = <1>;
+ read-only;
+ };
+
+ factory: partition at 200000 {
+ label = "Factory";
+ reg = <0x200000 0x100000>;
+ sercomm,scpart-id = <2>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_21000: macaddr at 21000 {
+ reg = <0x21000 0x6>;
+ };
+ };
+
+ partition at 300000 {
+ label = "Boot Flag";
+ reg = <0x300000 0x100000>;
+ sercomm,scpart-id = <3>;
+ };
+
+ partition at 400000 {
+ label = "kernel";
+ reg = <0x400000 0x600000>;
+ sercomm,scpart-id = <4>;
+ };
+
+ partition at a00000 {
+ label = "Kernel 2";
+ reg = <0xa00000 0x600000>;
+ sercomm,scpart-id = <5>;
+ read-only;
+ };
+
+ ubiconcat0: partition at 1000000 {
+ label = "File System 1";
+ reg = <0x1000000 0x2000000>;
+ sercomm,scpart-id = <6>;
+ };
+
+ partition at 3000000 {
+ label = "File System 2";
+ reg = <0x3000000 0x2000000>;
+ sercomm,scpart-id = <7>;
+ read-only;
+ };
+
+ ubiconcat1: partition at 5000000 {
+ label = "Configuration/log";
+ reg = <0x5000000 0x1400000>;
+ sercomm,scpart-id = <8>;
+ };
+
+ ubiconcat2: partition at 6400000 {
+ label = "Debug (Ftool)";
+ reg = <0x6400000 0x1a00000>;
+ sercomm,scpart-id = <9>;
+ };
+
+ ubiconcat3: partition at 8000000 {
+ label = "container";
+ reg = <0x8000000 0x7c00000>;
+ sercomm,scpart-id = <10>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+
+ nvmem-cells = <&macaddr_factory_21000>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <(5)>;
+ };
+};
+
+&pcie1 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ ieee80211-freq-limit = <2400000 2500000>;
+
+ nvmem-cells = <&macaddr_factory_21000>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <(4)>;
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_21000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&switch0 {
+ ports {
+ port at 0 {
+ status = "okay";
+ label = "wan";
+
+ nvmem-cells = <&macaddr_factory_21000>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <(1)>;
+ };
+
+ port at 1 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port at 2 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port at 3 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port at 4 {
+ status = "okay";
+ label = "lan4";
+ };
+ };
+};
+
+&uartlite3 {
+ status = "okay";
+};
+
+&state_default {
+ gpio {
+ groups = "jtag", "uart2";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index cc6dbe9418..96ae2765b9 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -328,6 +328,19 @@ define Device/beeline_smartbox-giga
endef
TARGET_DEVICES += beeline_smartbox-giga
+define Device/beeline_smartbox-turbo
+ $(Device/sercomm_dxx)
+ IMAGE_SIZE := 32768k
+ SERCOMM_HWID := DF3
+ SERCOMM_HWVER := 10200
+ SERCOMM_SWVER := 1004
+ DEVICE_VENDOR := Beeline
+ DEVICE_MODEL := SmartBox TURBO
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware \
+ kmod-usb3 uboot-envtools
+endef
+TARGET_DEVICES += beeline_smartbox-turbo
+
define Device/buffalo_wsr-1166dhp
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 9f62a29aa7..0daf15dd4d 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -24,7 +24,8 @@ asus,rt-n56u-b1)
ucidef_set_led_netdev "wan" "WAN link" "blue:wan" "wan"
;;
beeline,smartbox-flash|\
-beeline,smartbox-giga)
+beeline,smartbox-giga|\
+beeline,smartbox-turbo)
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
;;
cudy,wr2100)
diff --git a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
index 4ebe50fdfe..14e32f2968 100755
--- a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
+++ b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
@@ -8,6 +8,11 @@ boot() {
[ -n "$(fw_printenv bootcount bootchanged 2>/dev/null)" ] &&\
echo -e "bootcount\nbootchanged\n" | /usr/sbin/fw_setenv -s -
;;
+ beeline,smartbox-turbo)
+ [[ $(hexdump -n 1 -e '/1 "%1d"' -s $((0x20001)) /dev/mtd3) == \
+ $((0xff)) ]] || printf '\xff' | dd of=/dev/mtdblock3 \
+ count=1 bs=1 seek=$((0x20001))
+ ;;
linksys,e5600|\
linksys,ea6350-v4|\
linksys,ea7300-v1|\
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index 80490c377d..7eb86b31de 100755
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -56,6 +56,7 @@ platform_do_upgrade() {
asus,rt-ax53u|\
beeline,smartbox-flash|\
beeline,smartbox-giga|\
+ beeline,smartbox-turbo|\
dlink,dir-1960-a1|\
dlink,dir-2640-a1|\
dlink,dir-2660-a1|\
More information about the lede-commits
mailing list