[openwrt/openwrt] uboot-mvebu: remove enabled CONFIG_CMD_SETEXPR

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/69cef74c671cb7fa738a5a4c9a283c29f45326c7

commit 69cef74c671cb7fa738a5a4c9a283c29f45326c7
Author: Josef Schlehofer <pepe.schlehofer at gmail.com>
AuthorDate: Thu Apr 28 15:50:20 2022 +0200

    uboot-mvebu: remove enabled CONFIG_CMD_SETEXPR
    
    We don't need to make sure that we want to have enabled
    CONFIG_CMD_SETEXPR by default, since this is already done in U-boot [1].
    This was actually needed only for clearfog board [2], which was added in
    commit: da0005a6d08ae33d958a6d8a6c0c12dc07b5b2b8 ("uboot-mvebu: add
    patch to enable setexpr for clearfog boards) and send to U-boot to fix
    it properly. After a while, there was added support for Turris Omnia,
    which uses setexpr as well [3], but for this board, there are no fixes
    needed in U-boot and that's why we can remove this option here.
    
    It is helpful with shell scripting. If some downstream distributions are
    using it, they should correct it in defconfig for related boards.
    
    [1] https://source.denx.de/u-boot/u-boot/-/blob/e95afa56753cebcd20a5114b6d121f281b789006/cmd/Kconfig#L1504
    
    [2] https://github.com/openwrt/openwrt/blob/852126680e21edc71c0c66561ae5a6d7479dcc67/target/linux/mvebu/image/clearfog.bootscript#L7
    
    [3] https://github.com/openwrt/openwrt/blob/852126680e21edc71c0c66561ae5a6d7479dcc67/target/linux/mvebu/image/turris-omnia.bootscript#L2
    
    Signed-off-by: Josef Schlehofer <pepe.schlehofer at gmail.com>
---
 package/boot/uboot-mvebu/Makefile | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/package/boot/uboot-mvebu/Makefile b/package/boot/uboot-mvebu/Makefile
index 566f45ffed..a154d15dc1 100644
--- a/package/boot/uboot-mvebu/Makefile
+++ b/package/boot/uboot-mvebu/Makefile
@@ -62,13 +62,6 @@ UBOOT_TARGETS:= \
 	espressobin \
 	uDPU
 
-define Build/Configure
-	# enable additional options beyond <device>_defconfig
-	echo CONFIG_CMD_SETEXPR=y >> $(PKG_BUILD_DIR)/configs/$(UBOOT_CONFIG)_defconfig
-
-	$(call Build/Configure/U-Boot)
-endef
-
 define Package/u-boot/install
 	$(if $(findstring cortexa53,$(BUILD_SUBTARGET)),,$(Package/u-boot/install/default))
 endef