[openwrt/openwrt] hostapd: refresh patches

[LEDE Commits]

blocktrron pushed a commit to openwrt/openwrt.git, branch openwrt-21.02:
https://git.openwrt.org/39aaec62ca8a4877d771341bae48ef3eb625a9e5

commit 39aaec62ca8a4877d771341bae48ef3eb625a9e5
Author: David Bauer <mail at david-bauer.net>
AuthorDate: Mon Apr 25 01:11:32 2022 +0200

    hostapd: refresh patches
    
    Signed-off-by: David Bauer <mail at david-bauer.net>
---
 package/network/services/hostapd/patches/600-ubus_support.patch | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/package/network/services/hostapd/patches/600-ubus_support.patch b/package/network/services/hostapd/patches/600-ubus_support.patch
index ddcd926fad..db4d7f0189 100644
--- a/package/network/services/hostapd/patches/600-ubus_support.patch
+++ b/package/network/services/hostapd/patches/600-ubus_support.patch
@@ -424,7 +424,7 @@
  }
  
  
-@@ -352,6 +355,9 @@ void hostapd_handle_radio_measurement(st
+@@ -350,6 +353,9 @@ void hostapd_handle_radio_measurement(st
  		   mgmt->u.action.u.rrm.action, MAC2STR(mgmt->sa));
  
  	switch (mgmt->u.action.u.rrm.action) {
@@ -436,7 +436,7 @@
  		break;
 --- a/src/ap/wnm_ap.c
 +++ b/src/ap/wnm_ap.c
-@@ -463,7 +463,7 @@ static void ieee802_11_rx_bss_trans_mgmt
+@@ -461,7 +461,7 @@ static void ieee802_11_rx_bss_trans_mgmt
  					      size_t len)
  {
  	u8 dialog_token, status_code, bss_termination_delay;
@@ -445,7 +445,7 @@
  	int enabled = hapd->conf->bss_transition;
  	struct sta_info *sta;
  
-@@ -510,6 +510,7 @@ static void ieee802_11_rx_bss_trans_mgmt
+@@ -508,6 +508,7 @@ static void ieee802_11_rx_bss_trans_mgmt
  			wpa_printf(MSG_DEBUG, "WNM: not enough room for Target BSSID field");
  			return;
  		}
@@ -453,7 +453,7 @@
  		sta->agreed_to_steer = 1;
  		eloop_cancel_timeout(ap_sta_reset_steer_flag_timer, hapd, sta);
  		eloop_register_timeout(2, 0, ap_sta_reset_steer_flag_timer,
-@@ -529,6 +530,10 @@ static void ieee802_11_rx_bss_trans_mgmt
+@@ -527,6 +528,10 @@ static void ieee802_11_rx_bss_trans_mgmt
  			MAC2STR(addr), status_code, bss_termination_delay);
  	}