[openwrt/openwrt] ath79: add support for MikroTik RouterBOARD mAP lite

LEDE Commits lede-commits at lists.infradead.org
Sat Apr 16 06:11:53 PDT 2022 

ynezz pushed a commit to openwrt/openwrt.git, branch openwrt-21.02:
https://git.openwrt.org/9a765554f409235ff6359d6eccb79187c2513de0

commit 9a765554f409235ff6359d6eccb79187c2513de0
Author: Thibaut VARÈNE <hacks at slashdirt.org>
AuthorDate: Thu Mar 10 12:01:29 2022 +0100

    ath79: add support for MikroTik RouterBOARD mAP lite
    
    The MikroTik RouterBOARD mAPL-2nd (sold as mAP Lite) is a small
    2.4 GHz 802.11b/g/n PoE-capable AP.
    
    See https://mikrotik.com/product/RBmAPL-2nD for more info.
    
    Specifications:
     - SoC: Qualcomm Atheros QCA9533
     - RAM: 64 MB
     - Storage: 16 MB NOR
     - Wireless: Atheros AR9531 (SoC) 802.11b/g/n 2x2:2, 1.5 dBi antenna
     - Ethernet: Atheros AR8229 (SoC), 1x 10/100 port, 802.3af/at PoE in
     - 4 user-controllable LEDs:
       · 1x power (green)
       · 1x user (green)
       · 1x lan (green)
       · 1x wlan (green)
    
    Flashing:
     TFTP boot initramfs image and then perform sysupgrade. Follow common
     MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.
    
    Note: following 781d4bfb397cdd12ee0151eb66c577f470e3377d
     The network setup avoids using the integrated switch and connects the
     single Ethernet port directly. This way, link speed (10/100 Mbps) is
     properly reported by eth0.
    
    Signed-off-by: Thibaut VARÈNE <hacks at slashdirt.org>
    (cherry picked from commit eb38af788180d624e5b37aa5db1fe3766b138dc8)
---
 .../dts/qca9533_mikrotik_routerboard-mapl-2nd.dts  | 68 ++++++++++++++++++++++
 target/linux/ath79/image/mikrotik.mk               |  8 +++
 .../ath79/mikrotik/base-files/etc/board.d/01_leds  |  3 +-
 .../mikrotik/base-files/etc/board.d/02_network     |  2 +
 .../etc/hotplug.d/firmware/10-ath9k-eeprom         |  1 +
 5 files changed, 81 insertions(+), 1 deletion(-)

diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-mapl-2nd.dts b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-mapl-2nd.dts
new file mode 100644
index 0000000000..e2442f0095
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-mapl-2nd.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_mikrotik_routerboard-16m.dtsi"
+
+/ {
+	compatible = "mikrotik,routerboard-mapl-2nd", "qca,qca9533";
+	model = "MikroTik RouterBOARD mAPL-2nD (mAP lite)";
+
+	aliases {
+		led-boot = &led_user;
+		led-failsafe = &led_user;
+		led-running = &led_user;
+		led-upgrade = &led_user;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_power_pin &led_lan_pin>;
+
+		power {
+			label = "green:power";
+			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		lan {
+			label = "green:lan";
+			gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan {
+			label = "green:wlan";
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		led_user: user {
+			label = "green:user";
+			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	phy-handle = <&swphy0>;
+
+	gmac-config {
+		device = <&gmac>;
+		switch-phy-swap = <1>;
+	};
+};
+
+&eth1 {
+	compatible = "syscon", "simple-mfd";
+};
+
+&pinmux {
+	led_lan_pin: pinmux_led_lan_pin {
+		pinctrl-single,bits = <0x4 0x0 0xff>;
+	};
+
+	led_power_pin: pinmux_led_power_pin {
+		pinctrl-single,bits = <0x10 0x0 0xff00>;
+	};
+};
diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk
index 4256f77379..b2c7000419 100644
--- a/target/linux/ath79/image/mikrotik.mk
+++ b/target/linux/ath79/image/mikrotik.mk
@@ -45,6 +45,14 @@ define Device/mikrotik_routerboard-lhg-2nd
 endef
 TARGET_DEVICES += mikrotik_routerboard-lhg-2nd
 
+define Device/mikrotik_routerboard-mapl-2nd
+  $(Device/mikrotik_nor)
+  SOC := qca9533
+  DEVICE_MODEL := RouterBOARD mAPL-2nD (mAP lite)
+  IMAGE_SIZE := 16256k
+endef
+TARGET_DEVICES += mikrotik_routerboard-mapl-2nd
+
 define Device/mikrotik_routerboard-sxt-5nd-r2
   $(Device/mikrotik_nand)
   SOC := ar9344
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
index 0d3209c2e3..e95c5830e2 100755
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
@@ -7,7 +7,8 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-mikrotik,routerboard-lhg-2nd)
+mikrotik,routerboard-lhg-2nd|\
+mikrotik,routerboard-mapl-2nd)
 	ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
 	;;
 mikrotik,routerboard-wapr-2nd)
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
index bd249e0b86..bf8b9bdac2 100755
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
@@ -18,6 +18,7 @@ ath79_setup_interfaces()
 	mikrotik,routerboard-912uag-2hpnd|\
 	mikrotik,routerboard-921gs-5hpacd-15s|\
 	mikrotik,routerboard-lhg-2nd|\
+	mikrotik,routerboard-mapl-2nd|\
 	mikrotik,routerboard-sxt-5nd-r2|\
 	mikrotik,routerboard-wap-g-5hact2hnd|\
 	mikrotik,routerboard-wapr-2nd)
@@ -41,6 +42,7 @@ ath79_setup_macs()
 	mikrotik,routerboard-912uag-2hpnd|\
 	mikrotik,routerboard-921gs-5hpacd-15s|\
 	mikrotik,routerboard-lhg-2nd|\
+	mikrotik,routerboard-mapl-2nd|\
 	mikrotik,routerboard-sxt-5nd-r2|\
 	mikrotik,routerboard-wap-g-5hact2hnd|\
 	mikrotik,routerboard-wapr-2nd)
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index ae0c94d8ec..eca25b69de 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -29,6 +29,7 @@ case "$FIRMWARE" in
 	mikrotik,routerboard-wapr-2nd)
 		caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" +1)
 		;;
+	mikrotik,routerboard-mapl-2nd|\
 	mikrotik,routerboard-wap-g-5hact2hnd)
 		caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" +2)
 		;;

More information about the lede-commits mailing list