[openwrt/openwrt] ipq40xx: 5.10: drop upstreamed patches
LEDE Commits
lede-commits at lists.infradead.org
Sat Sep 25 10:29:18 PDT 2021
adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/9fe5516ee569046b2e038b352f593d9ad7f8659f
commit 9fe5516ee569046b2e038b352f593d9ad7f8659f
Author: Robert Marko <robert.marko at sartura.hr>
AuthorDate: Sun Sep 12 22:20:55 2021 +0200
ipq40xx: 5.10: drop upstreamed patches
Drop patches that have been upstreamed in before 5.10.
Signed-off-by: Robert Marko <robert.marko at sartura.hr>
---
...001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch | 42 -
...ulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch | 153 ----
...ts-qcom-ipq4019-Add-SDHCI-controller-node.patch | 36 -
...ts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch | 71 --
...5.7-ARM-dts-qcom-add-gpio-ranges-property.patch | 119 ---
...ts-qcom-ipq4019-fix-high-resolution-timer.patch | 33 -
...v5.8-net-phy-mdio-add-IPQ4019-MDIO-driver.patch | 210 -----
...5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch | 57 --
...-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch | 31 -
...07-v5.5-crypto-qce-switch-to-skcipher-API.patch | 993 ---------------------
...pto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch | 43 -
...v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch | 60 --
...o-qce-save-a-sg-table-slot-for-result-buf.patch | 85 --
...11-v5.6-crypto-qce-update-the-skcipher-IV.patch | 31 -
...ypto-qce-initialize-fallback-only-for-AES.patch | 54 --
...to-qce-allow-building-only-hashes-ciphers.patch | 419 ---------
...to-qce-use-cryptlen-when-adding-extra-sgl.patch | 89 --
...o-qce-use-AES-fallback-for-small-requests.patch | 113 ---
...o-qce-handle-AES-XTS-cases-that-qce-fails.patch | 59 --
...y-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch | 197 ----
.../0018-v5.9-pinctrl-msm-open-drain.patch | 81 --
....6-mtd-spi-nor-Add-support-for-mx25r3235f.patch | 29 -
22 files changed, 3005 deletions(-)
diff --git a/target/linux/ipq40xx/patches-5.10/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch b/target/linux/ipq40xx/patches-5.10/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch
deleted file mode 100644
index 8aa71f360f..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From f125e2d4339dda6937865f975470b29c84714c9b Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at gmail.com>
-Date: Mon, 6 Jan 2020 14:57:15 +0100
-Subject: [PATCH] ARM: qcom: Add support for IPQ40xx
-
-Add support for the Qualcomm IPQ40xx SoC in Kconfig.
-Also add its appropriate textofs.
-
-Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
-Signed-off-by: John Crispin <john at phrozen.org>
-Tested-by: Robert Marko <robert.marko at sartura.hr>
-Cc: Luka Perkov <luka.perkov at sartura.hr>
-Signed-off-by: Arnd Bergmann <arnd at arndb.de>
----
- arch/arm/Makefile | 1 +
- arch/arm/mach-qcom/Kconfig | 5 +++++
- 2 files changed, 6 insertions(+)
-
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -152,6 +152,7 @@ textofs-$(CONFIG_PM_H1940) := 0x001
- ifeq ($(CONFIG_ARCH_SA1100),y)
- textofs-$(CONFIG_SA1111) := 0x00208000
- endif
-+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
- textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
- textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
- textofs-$(CONFIG_ARCH_MESON) := 0x00208000
---- a/arch/arm/mach-qcom/Kconfig
-+++ b/arch/arm/mach-qcom/Kconfig
-@@ -12,6 +12,11 @@ menuconfig ARCH_QCOM
-
- if ARCH_QCOM
-
-+config ARCH_IPQ40XX
-+ bool "Enable support for IPQ40XX"
-+ select CLKSRC_QCOM
-+ select HAVE_ARM_ARCH_TIMER
-+
- config ARCH_MSM8X60
- bool "Enable support for MSM8X60"
- select CLKSRC_QCOM
diff --git a/target/linux/ipq40xx/patches-5.10/0002-01-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch b/target/linux/ipq40xx/patches-5.10/0002-01-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch
deleted file mode 100644
index aaf8c807ed..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0002-01-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-From 97043d292365ae39d62b54a6d79dff98d048b501 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robert.marko at sartura.hr>
-Date: Wed, 22 Jan 2020 12:44:14 +0100
-Subject: [PATCH] From ebf652b408200504194be32ad0a3f5bb49d6000a Mon Sep 17
- 00:00:00 2001 From: Robert Marko <robert.marko at sartura.hr> Date: Sun, 12 Jan
- 2020 12:30:01 +0100 Subject: [PATCH] regulator: add IPQ4019 SDHCI VQMMC LDO
- driver
-
-This introduces the IPQ4019 VQMMC LDO driver needed for
-the SD/EMMC driver I/O level operation.
-This will enable introducing SD/EMMC support for the built-in controller.
-
-Signed-off-by: Mantas Pucka <mantas at 8devices.com>
-Signed-off-by: Robert Marko <robert.marko at sartura.hr>
-Link: https://lore.kernel.org/r/20200112113003.11110-1-robert.marko@sartura.hr
-Signed-off-by: Mark Brown <broonie at kernel.org>
----
- drivers/regulator/Kconfig | 7 ++
- drivers/regulator/Makefile | 1 +
- drivers/regulator/vqmmc-ipq4019-regulator.c | 101 ++++++++++++++++++++
- 3 files changed, 109 insertions(+)
- create mode 100644 drivers/regulator/vqmmc-ipq4019-regulator.c
-
---- a/drivers/regulator/Kconfig
-+++ b/drivers/regulator/Kconfig
-@@ -1077,6 +1077,13 @@ config REGULATOR_VEXPRESS
- This driver provides support for voltage regulators available
- on the ARM Ltd's Versatile Express platform.
-
-+config REGULATOR_VQMMC_IPQ4019
-+ tristate "IPQ4019 VQMMC SD LDO regulator support"
-+ depends on ARCH_QCOM
-+ help
-+ This driver provides support for the VQMMC LDO I/0
-+ voltage regulator of the IPQ4019 SD/EMMC controller.
-+
- config REGULATOR_WM831X
- tristate "Wolfson Microelectronics WM831x PMIC regulators"
- depends on MFD_WM831X
---- a/drivers/regulator/Makefile
-+++ b/drivers/regulator/Makefile
-@@ -132,6 +132,7 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-r
- obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o
- obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o
- obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o
-+obj-$(CONFIG_REGULATOR_VQMMC_IPQ4019) += vqmmc-ipq4019-regulator.o
- obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
- obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
- obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
---- /dev/null
-+++ b/drivers/regulator/vqmmc-ipq4019-regulator.c
-@@ -0,0 +1,101 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+//
-+// Copyright (c) 2019 Mantas Pucka <mantas at 8devices.com>
-+// Copyright (c) 2019 Robert Marko <robert.marko at sartura.hr>
-+//
-+// Driver for IPQ4019 SD/MMC controller's I/O LDO voltage regulator
-+
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include <linux/regulator/driver.h>
-+#include <linux/regulator/machine.h>
-+#include <linux/regulator/of_regulator.h>
-+
-+static const unsigned int ipq4019_vmmc_voltages[] = {
-+ 1500000, 1800000, 2500000, 3000000,
-+};
-+
-+static const struct regulator_ops ipq4019_regulator_voltage_ops = {
-+ .list_voltage = regulator_list_voltage_table,
-+ .map_voltage = regulator_map_voltage_ascend,
-+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
-+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
-+};
-+
-+static const struct regulator_desc vmmc_regulator = {
-+ .name = "vmmcq",
-+ .ops = &ipq4019_regulator_voltage_ops,
-+ .type = REGULATOR_VOLTAGE,
-+ .owner = THIS_MODULE,
-+ .volt_table = ipq4019_vmmc_voltages,
-+ .n_voltages = ARRAY_SIZE(ipq4019_vmmc_voltages),
-+ .vsel_reg = 0,
-+ .vsel_mask = 0x3,
-+};
-+
-+static const struct regmap_config ipq4019_vmmcq_regmap_config = {
-+ .reg_bits = 32,
-+ .reg_stride = 4,
-+ .val_bits = 32,
-+};
-+
-+static int ipq4019_regulator_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct regulator_init_data *init_data;
-+ struct regulator_config cfg = {};
-+ struct regulator_dev *rdev;
-+ struct resource *res;
-+ struct regmap *rmap;
-+ void __iomem *base;
-+
-+ init_data = of_get_regulator_init_data(dev, dev->of_node,
-+ &vmmc_regulator);
-+ if (!init_data)
-+ return -EINVAL;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ rmap = devm_regmap_init_mmio(dev, base, &ipq4019_vmmcq_regmap_config);
-+ if (IS_ERR(rmap))
-+ return PTR_ERR(rmap);
-+
-+ cfg.dev = dev;
-+ cfg.init_data = init_data;
-+ cfg.of_node = dev->of_node;
-+ cfg.regmap = rmap;
-+
-+ rdev = devm_regulator_register(dev, &vmmc_regulator, &cfg);
-+ if (IS_ERR(rdev)) {
-+ dev_err(dev, "Failed to register regulator: %ld\n",
-+ PTR_ERR(rdev));
-+ return PTR_ERR(rdev);
-+ }
-+ platform_set_drvdata(pdev, rdev);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id regulator_ipq4019_of_match[] = {
-+ { .compatible = "qcom,vqmmc-ipq4019-regulator", },
-+ {},
-+};
-+
-+static struct platform_driver ipq4019_regulator_driver = {
-+ .probe = ipq4019_regulator_probe,
-+ .driver = {
-+ .name = "vqmmc-ipq4019-regulator",
-+ .of_match_table = of_match_ptr(regulator_ipq4019_of_match),
-+ },
-+};
-+module_platform_driver(ipq4019_regulator_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Mantas Pucka <mantas at 8devices.com>");
-+MODULE_DESCRIPTION("IPQ4019 VQMMC voltage regulator");
diff --git a/target/linux/ipq40xx/patches-5.10/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch b/target/linux/ipq40xx/patches-5.10/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch
deleted file mode 100644
index 25fce8daf0..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 04b3b72b5b8fdb883bfdc619cb29b03641b1cc6a Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko at gmail.com>
-Date: Thu, 15 Aug 2019 19:28:23 +0200
-Subject: [PATCH] ARM: dts: qcom: ipq4019: Add SDHCI controller node
-
-IPQ4019 has a built in SD/eMMC controller which is supported by the
-SDHCI MSM driver, by the "qcom,sdhci-msm-v4" binding.
-So lets add the appropriate node for it.
-
-Signed-off-by: Robert Marko <robimarko at gmail.com>
-Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -206,6 +206,18 @@
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- };
-
-+ sdhci: sdhci at 7824900 {
-+ compatible = "qcom,sdhci-msm-v4";
-+ reg = <0x7824900 0x11c>, <0x7824000 0x800>;
-+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "hc_irq", "pwr_irq";
-+ bus-width = <8>;
-+ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>,
-+ <&gcc GCC_DCD_XO_CLK>;
-+ clock-names = "core", "iface", "xo";
-+ status = "disabled";
-+ };
-+
- blsp_dma: dma at 7884000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0x07884000 0x23000>;
diff --git a/target/linux/ipq40xx/patches-5.10/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch b/target/linux/ipq40xx/patches-5.10/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch
deleted file mode 100644
index 3a4127febf..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 5e4548922009870a38bcf1d887317676d4e08f54 Mon Sep 17 00:00:00 2001
-From: Damir Franusic <damir.franusic at sartura.hr>
-Date: Thu, 21 Nov 2019 16:29:02 +0100
-Subject: [PATCH] ARM: dts: qcom: Add nodes for SMP boot in IPQ40xx
-
-Add missing nodes and properties to enable SMP
-support on IPQ40xx devices.
-
-Booting without "saw_l2" node:
-
-[ 0.001400] CPU: Testing write buffer coherency: ok
-[ 0.001856] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-[ 0.060163] Setting up static identity map for 0x80300000 - 0x80300060
-[ 0.080140] rcu: Hierarchical SRCU implementation.
-[ 0.120258] smp: Bringing up secondary CPUs ...
-[ 0.200540] CPU1: failed to boot: -19
-[ 0.280689] CPU2: failed to boot: -19
-[ 0.360874] CPU3: failed to boot: -19
-[ 0.360966] smp: Brought up 1 node, 1 CPU
-[ 0.360979] SMP: Total of 1 processors activated (96.00 BogoMIPS).
-[ 0.360988] CPU: All CPU(s) started in SVC mode.
-
-Then, booting with "saw_l2" node present (this patch applied):
-
-[ 0.001450] CPU: Testing write buffer coherency: ok
-[ 0.001904] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-[ 0.060161] Setting up static identity map for 0x80300000 - 0x80300060
-[ 0.080137] rcu: Hierarchical SRCU implementation.
-[ 0.120252] smp: Bringing up secondary CPUs ...
-[ 0.200958] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
-[ 0.281091] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
-[ 0.361264] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
-[ 0.361430] smp: Brought up 1 node, 4 CPUs
-[ 0.361460] SMP: Total of 4 processors activated (384.00 BogoMIPS).
-[ 0.361469] CPU: All CPU(s) started in SVC mode.
-
-Signed-off-by: Damir Franusic <damir.franusic at sartura.hr>
-Cc: Luka Perkov <luka.perkov at sartura.hr>
-Cc: Robert Marko <robert.marko at sartura.hr>
-Cc: Andy Gross <agross at kernel.org>
-Cc: Rob Herring <robh+dt at kernel.org>
-Cc: linux-arm-msm at vger.kernel.org
-Link: https://lore.kernel.org/r/20191121152902.21394-1-damir.franusic@gmail.com
-Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -102,6 +102,7 @@
- L2: l2-cache {
- compatible = "cache";
- cache-level = <2>;
-+ qcom,saw = <&saw_l2>;
- };
- };
-
-@@ -353,6 +354,12 @@
- regulator;
- };
-
-+ saw_l2: regulator at b012000 {
-+ compatible = "qcom,saw2";
-+ reg = <0xb012000 0x1000>;
-+ regulator;
-+ };
-+
- blsp1_uart1: serial at 78af000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x78af000 0x200>;
diff --git a/target/linux/ipq40xx/patches-5.10/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch b/target/linux/ipq40xx/patches-5.10/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch
deleted file mode 100644
index 6922bc8ff3..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From 8b99dc0922618062a1589ebd74df6108b4f9ac22 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at gmail.com>
-Date: Wed, 8 Jan 2020 13:54:55 +0100
-Subject: [PATCH] ARM: dts: qcom: add gpio-ranges property
-
-This patch adds the gpio-ranges property to almost all of
-the Qualcomm ARM platforms that utilize the pinctrl-msm
-framework.
-
-The gpio-ranges property is part of the gpiolib subsystem.
-As a result, the binding text is available in section
-"2.1 gpio- and pin-controller interaction" of
-Documentation/devicetree/bindings/gpio/gpio.txt
-
-For more information please see the patch titled:
-"pinctrl: msm: fix gpio-hog related boot issues" from
-this series.
-
-Reported-by: Sven Eckelmann <sven.eckelmann at openmesh.com>
-Tested-by: Sven Eckelmann <sven.eckelmann at openmesh.com> [ipq4019]
-Reviewed-by: Bjorn Andersson <bjorn.andersson at linaro.org>
-Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
-Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
-Tested-by: Robert Marko <robert.marko at sartura.hr> [ipq4019]
-Cc: Luka Perkov <luka.perkov at sartura.hr>
-Signed-off-by: Robert Marko <robert.marko at sartura.hr>
-Link: https://lore.kernel.org/r/20200108125455.308969-1-robert.marko@sartura.hr
-Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
----
- arch/arm/boot/dts/qcom-apq8064.dtsi | 1 +
- arch/arm/boot/dts/qcom-apq8084.dtsi | 1 +
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 +
- arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 +
- arch/arm/boot/dts/qcom-msm8660.dtsi | 1 +
- arch/arm/boot/dts/qcom-msm8960.dtsi | 1 +
- arch/arm/boot/dts/qcom-msm8974.dtsi | 1 +
- 8 files changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-apq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
-@@ -350,6 +350,7 @@
- reg = <0x800000 0x4000>;
-
- gpio-controller;
-+ gpio-ranges = <&tlmm_pinmux 0 0 90>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
---- a/arch/arm/boot/dts/qcom-apq8084.dtsi
-+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
-@@ -401,6 +401,7 @@
- compatible = "qcom,apq8084-pinctrl";
- reg = <0xfd510000 0x4000>;
- gpio-controller;
-+ gpio-ranges = <&tlmm 0 0 147>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -201,6 +201,7 @@
- compatible = "qcom,ipq4019-pinctrl";
- reg = <0x01000000 0x300000>;
- gpio-controller;
-+ gpio-ranges = <&tlmm 0 0 100>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -119,6 +119,7 @@
- reg = <0x800000 0x4000>;
-
- gpio-controller;
-+ gpio-ranges = <&qcom_pinmux 0 0 69>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
---- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
-+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
-@@ -128,6 +128,7 @@
- msmgpio: pinctrl at 800000 {
- compatible = "qcom,mdm9615-pinctrl";
- gpio-controller;
-+ gpio-ranges = <&msmgpio 0 0 88>;
- #gpio-cells = <2>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
---- a/arch/arm/boot/dts/qcom-msm8660.dtsi
-+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
-@@ -115,6 +115,7 @@
- reg = <0x800000 0x4000>;
-
- gpio-controller;
-+ gpio-ranges = <&tlmm 0 0 173>;
- #gpio-cells = <2>;
- interrupts = <0 16 0x4>;
- interrupt-controller;
---- a/arch/arm/boot/dts/qcom-msm8960.dtsi
-+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
-@@ -107,6 +107,7 @@
- msmgpio: pinctrl at 800000 {
- compatible = "qcom,msm8960-pinctrl";
- gpio-controller;
-+ gpio-ranges = <&msmgpio 0 0 152>;
- #gpio-cells = <2>;
- interrupts = <0 16 0x4>;
- interrupt-controller;
---- a/arch/arm/boot/dts/qcom-msm8974.dtsi
-+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
-@@ -707,6 +707,7 @@
- compatible = "qcom,msm8974-pinctrl";
- reg = <0xfd510000 0x4000>;
- gpio-controller;
-+ gpio-ranges = <&msmgpio 0 0 146>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
diff --git a/target/linux/ipq40xx/patches-5.10/0004-v5.8-ARM-dts-qcom-ipq4019-fix-high-resolution-timer.patch b/target/linux/ipq40xx/patches-5.10/0004-v5.8-ARM-dts-qcom-ipq4019-fix-high-resolution-timer.patch
deleted file mode 100644
index f82021f4cd..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0004-v5.8-ARM-dts-qcom-ipq4019-fix-high-resolution-timer.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 8acc36189dcaf4487d8c6ba7445948f39b1d248a Mon Sep 17 00:00:00 2001
-From: Abhishek Sahu <absahu at codeaurora.org>
-Date: Fri, 3 Apr 2020 13:40:40 +0200
-Subject: [PATCH] ARM: dts: qcom: ipq4019: fix high resolution timer
-
-Cherry-picked from CAF QSDK repo.
-Original commit message:
-The kernel is failing in switching the timer for high resolution
-mode and clock source operates in 10ms resolution. The always-on
-property needs to be given for timer device tree node to make
-clock source working in 1ns resolution.
-
-Signed-off-by: Abhishek Sahu <absahu at codeaurora.org>
-Signed-off-by: Pavel Kubelun <be.dissent at gmail.com>
-Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
-Tested-by: Robert Marko <robert.marko at sartura.hr>
-Cc: Luka Perkov <luka.perkov at sartura.hr>
-Link: https://lore.kernel.org/r/20200403114040.349787-1-robert.marko@sartura.hr
-Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -166,6 +166,7 @@
- <1 4 0xf08>,
- <1 1 0xf08>;
- clock-frequency = <48000000>;
-+ always-on;
- };
-
- soc {
diff --git a/target/linux/ipq40xx/patches-5.10/0005-01-v5.8-net-phy-mdio-add-IPQ4019-MDIO-driver.patch b/target/linux/ipq40xx/patches-5.10/0005-01-v5.8-net-phy-mdio-add-IPQ4019-MDIO-driver.patch
deleted file mode 100644
index d678f761f5..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0005-01-v5.8-net-phy-mdio-add-IPQ4019-MDIO-driver.patch
+++ /dev/null
@@ -1,210 +0,0 @@
-From 466ed24fb22342f3ae1c10758a6a0c6a8c081b2d Mon Sep 17 00:00:00 2001
-From: Robert Marko <robert.marko at sartura.hr>
-Date: Thu, 30 Apr 2020 11:07:05 +0200
-Subject: [PATCH] net: phy: mdio: add IPQ4019 MDIO driver
-
-This patch adds the driver for the MDIO interface
-inside of Qualcomm IPQ40xx series SoC-s.
-
-Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
-Signed-off-by: Robert Marko <robert.marko at sartura.hr>
-Reviewed-by: Andrew Lunn <andrew at lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli at gmail.com>
-Cc: Luka Perkov <luka.perkov at sartura.hr>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/phy/Kconfig | 7 ++
- drivers/net/phy/Makefile | 1 +
- drivers/net/phy/mdio-ipq4019.c | 160 +++++++++++++++++++++++++++++++++
- 3 files changed, 168 insertions(+)
- create mode 100644 drivers/net/phy/mdio-ipq4019.c
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -156,6 +156,13 @@ config MDIO_I2C
-
- This is library mode.
-
-+config MDIO_IPQ4019
-+ tristate "Qualcomm IPQ4019 MDIO interface support"
-+ depends on HAS_IOMEM && OF_MDIO
-+ help
-+ This driver supports the MDIO interface found in Qualcomm
-+ IPQ40xx series Soc-s.
-+
- config MDIO_MOXART
- tristate "MOXA ART MDIO interface support"
- depends on ARCH_MOXART || COMPILE_TEST
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium
- obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
- obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
- obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o
-+obj-$(CONFIG_MDIO_IPQ4019) += mdio-ipq4019.o
- obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
- obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o
- obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
---- /dev/null
-+++ b/drivers/net/phy/mdio-ipq4019.c
-@@ -0,0 +1,160 @@
-+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
-+/* Copyright (c) 2015, The Linux Foundation. All rights reserved. */
-+/* Copyright (c) 2020 Sartura Ltd. */
-+
-+#include <linux/delay.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/io.h>
-+#include <linux/iopoll.h>
-+#include <linux/of_address.h>
-+#include <linux/of_mdio.h>
-+#include <linux/phy.h>
-+#include <linux/platform_device.h>
-+
-+#define MDIO_ADDR_REG 0x44
-+#define MDIO_DATA_WRITE_REG 0x48
-+#define MDIO_DATA_READ_REG 0x4c
-+#define MDIO_CMD_REG 0x50
-+#define MDIO_CMD_ACCESS_BUSY BIT(16)
-+#define MDIO_CMD_ACCESS_START BIT(8)
-+#define MDIO_CMD_ACCESS_CODE_READ 0
-+#define MDIO_CMD_ACCESS_CODE_WRITE 1
-+
-+#define ipq4019_MDIO_TIMEOUT 10000
-+#define ipq4019_MDIO_SLEEP 10
-+
-+struct ipq4019_mdio_data {
-+ void __iomem *membase;
-+};
-+
-+static int ipq4019_mdio_wait_busy(struct mii_bus *bus)
-+{
-+ struct ipq4019_mdio_data *priv = bus->priv;
-+ unsigned int busy;
-+
-+ return readl_poll_timeout(priv->membase + MDIO_CMD_REG, busy,
-+ (busy & MDIO_CMD_ACCESS_BUSY) == 0,
-+ ipq4019_MDIO_SLEEP, ipq4019_MDIO_TIMEOUT);
-+}
-+
-+static int ipq4019_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
-+{
-+ struct ipq4019_mdio_data *priv = bus->priv;
-+ unsigned int cmd;
-+
-+ /* Reject clause 45 */
-+ if (regnum & MII_ADDR_C45)
-+ return -EOPNOTSUPP;
-+
-+ if (ipq4019_mdio_wait_busy(bus))
-+ return -ETIMEDOUT;
-+
-+ /* issue the phy address and reg */
-+ writel((mii_id << 8) | regnum, priv->membase + MDIO_ADDR_REG);
-+
-+ cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_READ;
-+
-+ /* issue read command */
-+ writel(cmd, priv->membase + MDIO_CMD_REG);
-+
-+ /* Wait read complete */
-+ if (ipq4019_mdio_wait_busy(bus))
-+ return -ETIMEDOUT;
-+
-+ /* Read and return data */
-+ return readl(priv->membase + MDIO_DATA_READ_REG);
-+}
-+
-+static int ipq4019_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
-+ u16 value)
-+{
-+ struct ipq4019_mdio_data *priv = bus->priv;
-+ unsigned int cmd;
-+
-+ /* Reject clause 45 */
-+ if (regnum & MII_ADDR_C45)
-+ return -EOPNOTSUPP;
-+
-+ if (ipq4019_mdio_wait_busy(bus))
-+ return -ETIMEDOUT;
-+
-+ /* issue the phy address and reg */
-+ writel((mii_id << 8) | regnum, priv->membase + MDIO_ADDR_REG);
-+
-+ /* issue write data */
-+ writel(value, priv->membase + MDIO_DATA_WRITE_REG);
-+
-+ cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_WRITE;
-+ /* issue write command */
-+ writel(cmd, priv->membase + MDIO_CMD_REG);
-+
-+ /* Wait write complete */
-+ if (ipq4019_mdio_wait_busy(bus))
-+ return -ETIMEDOUT;
-+
-+ return 0;
-+}
-+
-+static int ipq4019_mdio_probe(struct platform_device *pdev)
-+{
-+ struct ipq4019_mdio_data *priv;
-+ struct mii_bus *bus;
-+ int ret;
-+
-+ bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv));
-+ if (!bus)
-+ return -ENOMEM;
-+
-+ priv = bus->priv;
-+
-+ priv->membase = devm_platform_ioremap_resource(pdev, 0);
-+ if (IS_ERR(priv->membase))
-+ return PTR_ERR(priv->membase);
-+
-+ bus->name = "ipq4019_mdio";
-+ bus->read = ipq4019_mdio_read;
-+ bus->write = ipq4019_mdio_write;
-+ bus->parent = &pdev->dev;
-+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id);
-+
-+ ret = of_mdiobus_register(bus, pdev->dev.of_node);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
-+ return ret;
-+ }
-+
-+ platform_set_drvdata(pdev, bus);
-+
-+ return 0;
-+}
-+
-+static int ipq4019_mdio_remove(struct platform_device *pdev)
-+{
-+ struct mii_bus *bus = platform_get_drvdata(pdev);
-+
-+ mdiobus_unregister(bus);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id ipq4019_mdio_dt_ids[] = {
-+ { .compatible = "qcom,ipq4019-mdio" },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, ipq4019_mdio_dt_ids);
-+
-+static struct platform_driver ipq4019_mdio_driver = {
-+ .probe = ipq4019_mdio_probe,
-+ .remove = ipq4019_mdio_remove,
-+ .driver = {
-+ .name = "ipq4019-mdio",
-+ .of_match_table = ipq4019_mdio_dt_ids,
-+ },
-+};
-+
-+module_platform_driver(ipq4019_mdio_driver);
-+
-+MODULE_DESCRIPTION("ipq4019 MDIO interface driver");
-+MODULE_AUTHOR("Qualcomm Atheros");
-+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/target/linux/ipq40xx/patches-5.10/0005-02-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch b/target/linux/ipq40xx/patches-5.10/0005-02-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch
deleted file mode 100644
index 1976686e8f..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0005-02-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 9c8c0f70ec6fdac2398632c723c48277be09b7c0 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robert.marko at sartura.hr>
-Date: Thu, 30 Apr 2020 11:07:07 +0200
-Subject: [PATCH] ARM: dts: qcom: ipq4019: add MDIO node
-
-This patch adds the necessary MDIO interface node
-to the Qualcomm IPQ4019 DTSI.
-
-Built-in QCA8337N switch is managed using it,
-and since we have a driver for it lets add it.
-
-Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
-Signed-off-by: Robert Marko <robert.marko at sartura.hr>
-Reviewed-by: Andrew Lunn <andrew at lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli at gmail.com>
-Cc: Luka Perkov <luka.perkov at sartura.hr>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -577,5 +577,33 @@
- "legacy";
- status = "disabled";
- };
-+
-+ mdio: mdio at 90000 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "qcom,ipq4019-mdio";
-+ reg = <0x90000 0x64>;
-+ status = "disabled";
-+
-+ ethphy0: ethernet-phy at 0 {
-+ reg = <0>;
-+ };
-+
-+ ethphy1: ethernet-phy at 1 {
-+ reg = <1>;
-+ };
-+
-+ ethphy2: ethernet-phy at 2 {
-+ reg = <2>;
-+ };
-+
-+ ethphy3: ethernet-phy at 3 {
-+ reg = <3>;
-+ };
-+
-+ ethphy4: ethernet-phy at 4 {
-+ reg = <4>;
-+ };
-+ };
- };
- };
diff --git a/target/linux/ipq40xx/patches-5.10/0006-v5.5-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch b/target/linux/ipq40xx/patches-5.10/0006-v5.5-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch
deleted file mode 100644
index 415d6fff99..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0006-v5.5-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Subject: [PATCH] crypto: qce - add CRYPTO_ALG_KERN_DRIVER_ONLY flag
-
-Set the CRYPTO_ALG_KERN_DRIVER_ONLY flag to all algorithms exposed by
-the qce driver, since they are all hardware accelerated, accessible
-through a kernel driver only, and not available directly to userspace.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz at gmail.com>
-
---- a/drivers/crypto/qce/ablkcipher.c
-+++ b/drivers/crypto/qce/ablkcipher.c
-@@ -380,7 +380,7 @@ static int qce_ablkcipher_register_one(c
-
- alg->cra_priority = 300;
- alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC |
-- CRYPTO_ALG_NEED_FALLBACK;
-+ CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY;
- alg->cra_ctxsize = sizeof(struct qce_cipher_ctx);
- alg->cra_alignmask = 0;
- alg->cra_type = &crypto_ablkcipher_type;
---- a/drivers/crypto/qce/sha.c
-+++ b/drivers/crypto/qce/sha.c
-@@ -495,7 +495,7 @@ static int qce_ahash_register_one(const
- base = &alg->halg.base;
- base->cra_blocksize = def->blocksize;
- base->cra_priority = 300;
-- base->cra_flags = CRYPTO_ALG_ASYNC;
-+ base->cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_KERN_DRIVER_ONLY;
- base->cra_ctxsize = sizeof(struct qce_sha_ctx);
- base->cra_alignmask = 0;
- base->cra_module = THIS_MODULE;
diff --git a/target/linux/ipq40xx/patches-5.10/0007-v5.5-crypto-qce-switch-to-skcipher-API.patch b/target/linux/ipq40xx/patches-5.10/0007-v5.5-crypto-qce-switch-to-skcipher-API.patch
deleted file mode 100644
index 4dcb942150..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0007-v5.5-crypto-qce-switch-to-skcipher-API.patch
+++ /dev/null
@@ -1,993 +0,0 @@
-From f441873642eebf20566c18d2966a8cd4b433ec1c Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb at kernel.org>
-Date: Tue, 5 Nov 2019 14:28:17 +0100
-Subject: [PATCH] crypto: qce - switch to skcipher API
-
-Commit 7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
-dated 20 august 2015 introduced the new skcipher API which is supposed to
-replace both blkcipher and ablkcipher. While all consumers of the API have
-been converted long ago, some producers of the ablkcipher remain, forcing
-us to keep the ablkcipher support routines alive, along with the matching
-code to expose [a]blkciphers via the skcipher API.
-
-So switch this driver to the skcipher API, allowing us to finally drop the
-blkcipher code in the near future.
-
-Reviewed-by: Stanimir Varbanov <stanimir.varbanov at linaro.org>
-Signed-off-by: Ard Biesheuvel <ardb at kernel.org>
-Backported-to-4.19-by: Eneas U de Queiroz <cotequeiroz at gmail.com>
-
---- a/drivers/crypto/qce/Makefile
-+++ b/drivers/crypto/qce/Makefile
-@@ -4,4 +4,4 @@ qcrypto-objs := core.o \
- common.o \
- dma.o \
- sha.o \
-- ablkcipher.o
-+ skcipher.o
---- a/drivers/crypto/qce/cipher.h
-+++ b/drivers/crypto/qce/cipher.h
-@@ -45,12 +45,12 @@ struct qce_cipher_reqctx {
- unsigned int cryptlen;
- };
-
--static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_tfm *tfm)
-+static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_skcipher *tfm)
- {
-- struct crypto_alg *alg = tfm->__crt_alg;
-- return container_of(alg, struct qce_alg_template, alg.crypto);
-+ struct skcipher_alg *alg = crypto_skcipher_alg(tfm);
-+ return container_of(alg, struct qce_alg_template, alg.skcipher);
- }
-
--extern const struct qce_algo_ops ablkcipher_ops;
-+extern const struct qce_algo_ops skcipher_ops;
-
- #endif /* _CIPHER_H_ */
---- a/drivers/crypto/qce/common.c
-+++ b/drivers/crypto/qce/common.c
-@@ -304,13 +304,13 @@ go_proc:
- return 0;
- }
-
--static int qce_setup_regs_ablkcipher(struct crypto_async_request *async_req,
-+static int qce_setup_regs_skcipher(struct crypto_async_request *async_req,
- u32 totallen, u32 offset)
- {
-- struct ablkcipher_request *req = ablkcipher_request_cast(async_req);
-- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
-+ struct skcipher_request *req = skcipher_request_cast(async_req);
-+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(async_req->tfm);
-- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm);
-+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
- struct qce_device *qce = tmpl->qce;
- __be32 enckey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(__be32)] = {0};
- __be32 enciv[QCE_MAX_IV_SIZE / sizeof(__be32)] = {0};
-@@ -389,8 +389,8 @@ int qce_start(struct crypto_async_reques
- u32 offset)
- {
- switch (type) {
-- case CRYPTO_ALG_TYPE_ABLKCIPHER:
-- return qce_setup_regs_ablkcipher(async_req, totallen, offset);
-+ case CRYPTO_ALG_TYPE_SKCIPHER:
-+ return qce_setup_regs_skcipher(async_req, totallen, offset);
- case CRYPTO_ALG_TYPE_AHASH:
- return qce_setup_regs_ahash(async_req, totallen, offset);
- default:
---- a/drivers/crypto/qce/common.h
-+++ b/drivers/crypto/qce/common.h
-@@ -10,6 +10,7 @@
- #include <linux/types.h>
- #include <crypto/aes.h>
- #include <crypto/hash.h>
-+#include <crypto/internal/skcipher.h>
-
- /* key size in bytes */
- #define QCE_SHA_HMAC_KEY_SIZE 64
-@@ -79,7 +80,7 @@ struct qce_alg_template {
- unsigned long alg_flags;
- const u32 *std_iv;
- union {
-- struct crypto_alg crypto;
-+ struct skcipher_alg skcipher;
- struct ahash_alg ahash;
- } alg;
- struct qce_device *qce;
---- a/drivers/crypto/qce/core.c
-+++ b/drivers/crypto/qce/core.c
-@@ -22,7 +22,7 @@
- #define QCE_QUEUE_LENGTH 1
-
- static const struct qce_algo_ops *qce_ops[] = {
-- &ablkcipher_ops,
-+ &skcipher_ops,
- &ahash_ops,
- };
-
---- a/drivers/crypto/qce/ablkcipher.c
-+++ /dev/null
-@@ -1,440 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-only
--/*
-- * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
-- */
--
--#include <linux/device.h>
--#include <linux/interrupt.h>
--#include <linux/types.h>
--#include <crypto/aes.h>
--#include <crypto/internal/des.h>
--#include <crypto/internal/skcipher.h>
--
--#include "cipher.h"
--
--static LIST_HEAD(ablkcipher_algs);
--
--static void qce_ablkcipher_done(void *data)
--{
-- struct crypto_async_request *async_req = data;
-- struct ablkcipher_request *req = ablkcipher_request_cast(async_req);
-- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
-- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm);
-- struct qce_device *qce = tmpl->qce;
-- enum dma_data_direction dir_src, dir_dst;
-- u32 status;
-- int error;
-- bool diff_dst;
--
-- diff_dst = (req->src != req->dst) ? true : false;
-- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
-- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
--
-- error = qce_dma_terminate_all(&qce->dma);
-- if (error)
-- dev_dbg(qce->dev, "ablkcipher dma termination error (%d)\n",
-- error);
--
-- if (diff_dst)
-- dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src);
-- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
--
-- sg_free_table(&rctx->dst_tbl);
--
-- error = qce_check_status(qce, &status);
-- if (error < 0)
-- dev_dbg(qce->dev, "ablkcipher operation error (%x)\n", status);
--
-- qce->async_req_done(tmpl->qce, error);
--}
--
--static int
--qce_ablkcipher_async_req_handle(struct crypto_async_request *async_req)
--{
-- struct ablkcipher_request *req = ablkcipher_request_cast(async_req);
-- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
-- struct crypto_ablkcipher *ablkcipher = crypto_ablkcipher_reqtfm(req);
-- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm);
-- struct qce_device *qce = tmpl->qce;
-- enum dma_data_direction dir_src, dir_dst;
-- struct scatterlist *sg;
-- bool diff_dst;
-- gfp_t gfp;
-- int ret;
--
-- rctx->iv = req->info;
-- rctx->ivsize = crypto_ablkcipher_ivsize(ablkcipher);
-- rctx->cryptlen = req->nbytes;
--
-- diff_dst = (req->src != req->dst) ? true : false;
-- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
-- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
--
-- rctx->src_nents = sg_nents_for_len(req->src, req->nbytes);
-- if (diff_dst)
-- rctx->dst_nents = sg_nents_for_len(req->dst, req->nbytes);
-- else
-- rctx->dst_nents = rctx->src_nents;
-- if (rctx->src_nents < 0) {
-- dev_err(qce->dev, "Invalid numbers of src SG.\n");
-- return rctx->src_nents;
-- }
-- if (rctx->dst_nents < 0) {
-- dev_err(qce->dev, "Invalid numbers of dst SG.\n");
-- return -rctx->dst_nents;
-- }
--
-- rctx->dst_nents += 1;
--
-- gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
-- GFP_KERNEL : GFP_ATOMIC;
--
-- ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp);
-- if (ret)
-- return ret;
--
-- sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
--
-- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst);
-- if (IS_ERR(sg)) {
-- ret = PTR_ERR(sg);
-- goto error_free;
-- }
--
-- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg);
-- if (IS_ERR(sg)) {
-- ret = PTR_ERR(sg);
-- goto error_free;
-- }
--
-- sg_mark_end(sg);
-- rctx->dst_sg = rctx->dst_tbl.sgl;
--
-- ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
-- if (ret < 0)
-- goto error_free;
--
-- if (diff_dst) {
-- ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src);
-- if (ret < 0)
-- goto error_unmap_dst;
-- rctx->src_sg = req->src;
-- } else {
-- rctx->src_sg = rctx->dst_sg;
-- }
--
-- ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents,
-- rctx->dst_sg, rctx->dst_nents,
-- qce_ablkcipher_done, async_req);
-- if (ret)
-- goto error_unmap_src;
--
-- qce_dma_issue_pending(&qce->dma);
--
-- ret = qce_start(async_req, tmpl->crypto_alg_type, req->nbytes, 0);
-- if (ret)
-- goto error_terminate;
--
-- return 0;
--
--error_terminate:
-- qce_dma_terminate_all(&qce->dma);
--error_unmap_src:
-- if (diff_dst)
-- dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src);
--error_unmap_dst:
-- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
--error_free:
-- sg_free_table(&rctx->dst_tbl);
-- return ret;
--}
--
--static int qce_ablkcipher_setkey(struct crypto_ablkcipher *ablk, const u8 *key,
-- unsigned int keylen)
--{
-- struct crypto_tfm *tfm = crypto_ablkcipher_tfm(ablk);
-- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
-- int ret;
--
-- if (!key || !keylen)
-- return -EINVAL;
--
-- switch (keylen) {
-- case AES_KEYSIZE_128:
-- case AES_KEYSIZE_256:
-- break;
-- default:
-- goto fallback;
-- }
--
-- ctx->enc_keylen = keylen;
-- memcpy(ctx->enc_key, key, keylen);
-- return 0;
--fallback:
-- ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen);
-- if (!ret)
-- ctx->enc_keylen = keylen;
-- return ret;
--}
--
--static int qce_des_setkey(struct crypto_ablkcipher *ablk, const u8 *key,
-- unsigned int keylen)
--{
-- struct qce_cipher_ctx *ctx = crypto_ablkcipher_ctx(ablk);
-- int err;
--
-- err = verify_ablkcipher_des_key(ablk, key);
-- if (err)
-- return err;
--
-- ctx->enc_keylen = keylen;
-- memcpy(ctx->enc_key, key, keylen);
-- return 0;
--}
--
--static int qce_des3_setkey(struct crypto_ablkcipher *ablk, const u8 *key,
-- unsigned int keylen)
--{
-- struct qce_cipher_ctx *ctx = crypto_ablkcipher_ctx(ablk);
-- int err;
--
-- err = verify_ablkcipher_des3_key(ablk, key);
-- if (err)
-- return err;
--
-- ctx->enc_keylen = keylen;
-- memcpy(ctx->enc_key, key, keylen);
-- return 0;
--}
--
--static int qce_ablkcipher_crypt(struct ablkcipher_request *req, int encrypt)
--{
-- struct crypto_tfm *tfm =
-- crypto_ablkcipher_tfm(crypto_ablkcipher_reqtfm(req));
-- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
-- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
-- struct qce_alg_template *tmpl = to_cipher_tmpl(tfm);
-- int ret;
--
-- rctx->flags = tmpl->alg_flags;
-- rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
--
-- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 &&
-- ctx->enc_keylen != AES_KEYSIZE_256) {
-- SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
--
-- skcipher_request_set_sync_tfm(subreq, ctx->fallback);
-- skcipher_request_set_callback(subreq, req->base.flags,
-- NULL, NULL);
-- skcipher_request_set_crypt(subreq, req->src, req->dst,
-- req->nbytes, req->info);
-- ret = encrypt ? crypto_skcipher_encrypt(subreq) :
-- crypto_skcipher_decrypt(subreq);
-- skcipher_request_zero(subreq);
-- return ret;
-- }
--
-- return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base);
--}
--
--static int qce_ablkcipher_encrypt(struct ablkcipher_request *req)
--{
-- return qce_ablkcipher_crypt(req, 1);
--}
--
--static int qce_ablkcipher_decrypt(struct ablkcipher_request *req)
--{
-- return qce_ablkcipher_crypt(req, 0);
--}
--
--static int qce_ablkcipher_init(struct crypto_tfm *tfm)
--{
-- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
--
-- memset(ctx, 0, sizeof(*ctx));
-- tfm->crt_ablkcipher.reqsize = sizeof(struct qce_cipher_reqctx);
--
-- ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(tfm),
-- 0, CRYPTO_ALG_NEED_FALLBACK);
-- return PTR_ERR_OR_ZERO(ctx->fallback);
--}
--
--static void qce_ablkcipher_exit(struct crypto_tfm *tfm)
--{
-- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
--
-- crypto_free_sync_skcipher(ctx->fallback);
--}
--
--struct qce_ablkcipher_def {
-- unsigned long flags;
-- const char *name;
-- const char *drv_name;
-- unsigned int blocksize;
-- unsigned int ivsize;
-- unsigned int min_keysize;
-- unsigned int max_keysize;
--};
--
--static const struct qce_ablkcipher_def ablkcipher_def[] = {
-- {
-- .flags = QCE_ALG_AES | QCE_MODE_ECB,
-- .name = "ecb(aes)",
-- .drv_name = "ecb-aes-qce",
-- .blocksize = AES_BLOCK_SIZE,
-- .ivsize = AES_BLOCK_SIZE,
-- .min_keysize = AES_MIN_KEY_SIZE,
-- .max_keysize = AES_MAX_KEY_SIZE,
-- },
-- {
-- .flags = QCE_ALG_AES | QCE_MODE_CBC,
-- .name = "cbc(aes)",
-- .drv_name = "cbc-aes-qce",
-- .blocksize = AES_BLOCK_SIZE,
-- .ivsize = AES_BLOCK_SIZE,
-- .min_keysize = AES_MIN_KEY_SIZE,
-- .max_keysize = AES_MAX_KEY_SIZE,
-- },
-- {
-- .flags = QCE_ALG_AES | QCE_MODE_CTR,
-- .name = "ctr(aes)",
-- .drv_name = "ctr-aes-qce",
-- .blocksize = AES_BLOCK_SIZE,
-- .ivsize = AES_BLOCK_SIZE,
-- .min_keysize = AES_MIN_KEY_SIZE,
-- .max_keysize = AES_MAX_KEY_SIZE,
-- },
-- {
-- .flags = QCE_ALG_AES | QCE_MODE_XTS,
-- .name = "xts(aes)",
-- .drv_name = "xts-aes-qce",
-- .blocksize = AES_BLOCK_SIZE,
-- .ivsize = AES_BLOCK_SIZE,
-- .min_keysize = AES_MIN_KEY_SIZE,
-- .max_keysize = AES_MAX_KEY_SIZE,
-- },
-- {
-- .flags = QCE_ALG_DES | QCE_MODE_ECB,
-- .name = "ecb(des)",
-- .drv_name = "ecb-des-qce",
-- .blocksize = DES_BLOCK_SIZE,
-- .ivsize = 0,
-- .min_keysize = DES_KEY_SIZE,
-- .max_keysize = DES_KEY_SIZE,
-- },
-- {
-- .flags = QCE_ALG_DES | QCE_MODE_CBC,
-- .name = "cbc(des)",
-- .drv_name = "cbc-des-qce",
-- .blocksize = DES_BLOCK_SIZE,
-- .ivsize = DES_BLOCK_SIZE,
-- .min_keysize = DES_KEY_SIZE,
-- .max_keysize = DES_KEY_SIZE,
-- },
-- {
-- .flags = QCE_ALG_3DES | QCE_MODE_ECB,
-- .name = "ecb(des3_ede)",
-- .drv_name = "ecb-3des-qce",
-- .blocksize = DES3_EDE_BLOCK_SIZE,
-- .ivsize = 0,
-- .min_keysize = DES3_EDE_KEY_SIZE,
-- .max_keysize = DES3_EDE_KEY_SIZE,
-- },
-- {
-- .flags = QCE_ALG_3DES | QCE_MODE_CBC,
-- .name = "cbc(des3_ede)",
-- .drv_name = "cbc-3des-qce",
-- .blocksize = DES3_EDE_BLOCK_SIZE,
-- .ivsize = DES3_EDE_BLOCK_SIZE,
-- .min_keysize = DES3_EDE_KEY_SIZE,
-- .max_keysize = DES3_EDE_KEY_SIZE,
-- },
--};
--
--static int qce_ablkcipher_register_one(const struct qce_ablkcipher_def *def,
-- struct qce_device *qce)
--{
-- struct qce_alg_template *tmpl;
-- struct crypto_alg *alg;
-- int ret;
--
-- tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL);
-- if (!tmpl)
-- return -ENOMEM;
--
-- alg = &tmpl->alg.crypto;
--
-- snprintf(alg->cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name);
-- snprintf(alg->cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s",
-- def->drv_name);
--
-- alg->cra_blocksize = def->blocksize;
-- alg->cra_ablkcipher.ivsize = def->ivsize;
-- alg->cra_ablkcipher.min_keysize = def->min_keysize;
-- alg->cra_ablkcipher.max_keysize = def->max_keysize;
-- alg->cra_ablkcipher.setkey = IS_3DES(def->flags) ? qce_des3_setkey :
-- IS_DES(def->flags) ? qce_des_setkey :
-- qce_ablkcipher_setkey;
-- alg->cra_ablkcipher.encrypt = qce_ablkcipher_encrypt;
-- alg->cra_ablkcipher.decrypt = qce_ablkcipher_decrypt;
--
-- alg->cra_priority = 300;
-- alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC |
-- CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY;
-- alg->cra_ctxsize = sizeof(struct qce_cipher_ctx);
-- alg->cra_alignmask = 0;
-- alg->cra_type = &crypto_ablkcipher_type;
-- alg->cra_module = THIS_MODULE;
-- alg->cra_init = qce_ablkcipher_init;
-- alg->cra_exit = qce_ablkcipher_exit;
--
-- INIT_LIST_HEAD(&tmpl->entry);
-- tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_ABLKCIPHER;
-- tmpl->alg_flags = def->flags;
-- tmpl->qce = qce;
--
-- ret = crypto_register_alg(alg);
-- if (ret) {
-- kfree(tmpl);
-- dev_err(qce->dev, "%s registration failed\n", alg->cra_name);
-- return ret;
-- }
--
-- list_add_tail(&tmpl->entry, &ablkcipher_algs);
-- dev_dbg(qce->dev, "%s is registered\n", alg->cra_name);
-- return 0;
--}
--
--static void qce_ablkcipher_unregister(struct qce_device *qce)
--{
-- struct qce_alg_template *tmpl, *n;
--
-- list_for_each_entry_safe(tmpl, n, &ablkcipher_algs, entry) {
-- crypto_unregister_alg(&tmpl->alg.crypto);
-- list_del(&tmpl->entry);
-- kfree(tmpl);
-- }
--}
--
--static int qce_ablkcipher_register(struct qce_device *qce)
--{
-- int ret, i;
--
-- for (i = 0; i < ARRAY_SIZE(ablkcipher_def); i++) {
-- ret = qce_ablkcipher_register_one(&ablkcipher_def[i], qce);
-- if (ret)
-- goto err;
-- }
--
-- return 0;
--err:
-- qce_ablkcipher_unregister(qce);
-- return ret;
--}
--
--const struct qce_algo_ops ablkcipher_ops = {
-- .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
-- .register_algs = qce_ablkcipher_register,
-- .unregister_algs = qce_ablkcipher_unregister,
-- .async_req_handle = qce_ablkcipher_async_req_handle,
--};
---- /dev/null
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -0,0 +1,440 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/interrupt.h>
-+#include <linux/types.h>
-+#include <crypto/aes.h>
-+#include <crypto/internal/des.h>
-+#include <crypto/internal/skcipher.h>
-+
-+#include "cipher.h"
-+
-+static LIST_HEAD(skcipher_algs);
-+
-+static void qce_skcipher_done(void *data)
-+{
-+ struct crypto_async_request *async_req = data;
-+ struct skcipher_request *req = skcipher_request_cast(async_req);
-+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
-+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
-+ struct qce_device *qce = tmpl->qce;
-+ enum dma_data_direction dir_src, dir_dst;
-+ u32 status;
-+ int error;
-+ bool diff_dst;
-+
-+ diff_dst = (req->src != req->dst) ? true : false;
-+ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
-+ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
-+
-+ error = qce_dma_terminate_all(&qce->dma);
-+ if (error)
-+ dev_dbg(qce->dev, "skcipher dma termination error (%d)\n",
-+ error);
-+
-+ if (diff_dst)
-+ dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src);
-+ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
-+
-+ sg_free_table(&rctx->dst_tbl);
-+
-+ error = qce_check_status(qce, &status);
-+ if (error < 0)
-+ dev_dbg(qce->dev, "skcipher operation error (%x)\n", status);
-+
-+ qce->async_req_done(tmpl->qce, error);
-+}
-+
-+static int
-+qce_skcipher_async_req_handle(struct crypto_async_request *async_req)
-+{
-+ struct skcipher_request *req = skcipher_request_cast(async_req);
-+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
-+ struct crypto_skcipher *skcipher = crypto_skcipher_reqtfm(req);
-+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
-+ struct qce_device *qce = tmpl->qce;
-+ enum dma_data_direction dir_src, dir_dst;
-+ struct scatterlist *sg;
-+ bool diff_dst;
-+ gfp_t gfp;
-+ int ret;
-+
-+ rctx->iv = req->iv;
-+ rctx->ivsize = crypto_skcipher_ivsize(skcipher);
-+ rctx->cryptlen = req->cryptlen;
-+
-+ diff_dst = (req->src != req->dst) ? true : false;
-+ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
-+ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
-+
-+ rctx->src_nents = sg_nents_for_len(req->src, req->cryptlen);
-+ if (diff_dst)
-+ rctx->dst_nents = sg_nents_for_len(req->dst, req->cryptlen);
-+ else
-+ rctx->dst_nents = rctx->src_nents;
-+ if (rctx->src_nents < 0) {
-+ dev_err(qce->dev, "Invalid numbers of src SG.\n");
-+ return rctx->src_nents;
-+ }
-+ if (rctx->dst_nents < 0) {
-+ dev_err(qce->dev, "Invalid numbers of dst SG.\n");
-+ return -rctx->dst_nents;
-+ }
-+
-+ rctx->dst_nents += 1;
-+
-+ gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
-+ GFP_KERNEL : GFP_ATOMIC;
-+
-+ ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp);
-+ if (ret)
-+ return ret;
-+
-+ sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
-+
-+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst);
-+ if (IS_ERR(sg)) {
-+ ret = PTR_ERR(sg);
-+ goto error_free;
-+ }
-+
-+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg);
-+ if (IS_ERR(sg)) {
-+ ret = PTR_ERR(sg);
-+ goto error_free;
-+ }
-+
-+ sg_mark_end(sg);
-+ rctx->dst_sg = rctx->dst_tbl.sgl;
-+
-+ ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
-+ if (ret < 0)
-+ goto error_free;
-+
-+ if (diff_dst) {
-+ ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src);
-+ if (ret < 0)
-+ goto error_unmap_dst;
-+ rctx->src_sg = req->src;
-+ } else {
-+ rctx->src_sg = rctx->dst_sg;
-+ }
-+
-+ ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents,
-+ rctx->dst_sg, rctx->dst_nents,
-+ qce_skcipher_done, async_req);
-+ if (ret)
-+ goto error_unmap_src;
-+
-+ qce_dma_issue_pending(&qce->dma);
-+
-+ ret = qce_start(async_req, tmpl->crypto_alg_type, req->cryptlen, 0);
-+ if (ret)
-+ goto error_terminate;
-+
-+ return 0;
-+
-+error_terminate:
-+ qce_dma_terminate_all(&qce->dma);
-+error_unmap_src:
-+ if (diff_dst)
-+ dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src);
-+error_unmap_dst:
-+ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
-+error_free:
-+ sg_free_table(&rctx->dst_tbl);
-+ return ret;
-+}
-+
-+static int qce_skcipher_setkey(struct crypto_skcipher *ablk, const u8 *key,
-+ unsigned int keylen)
-+{
-+ struct crypto_tfm *tfm = crypto_skcipher_tfm(ablk);
-+ struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
-+ int ret;
-+
-+ if (!key || !keylen)
-+ return -EINVAL;
-+
-+ switch (keylen) {
-+ case AES_KEYSIZE_128:
-+ case AES_KEYSIZE_256:
-+ break;
-+ default:
-+ goto fallback;
-+ }
-+
-+ ctx->enc_keylen = keylen;
-+ memcpy(ctx->enc_key, key, keylen);
-+ return 0;
-+fallback:
-+ ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen);
-+ if (!ret)
-+ ctx->enc_keylen = keylen;
-+ return ret;
-+}
-+
-+static int qce_des_setkey(struct crypto_skcipher *ablk, const u8 *key,
-+ unsigned int keylen)
-+{
-+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk);
-+ int err;
-+
-+ err = verify_skcipher_des_key(ablk, key);
-+ if (err)
-+ return err;
-+
-+ ctx->enc_keylen = keylen;
-+ memcpy(ctx->enc_key, key, keylen);
-+ return 0;
-+}
-+
-+static int qce_des3_setkey(struct crypto_skcipher *ablk, const u8 *key,
-+ unsigned int keylen)
-+{
-+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk);
-+ int err;
-+
-+ err = verify_skcipher_des3_key(ablk, key);
-+ if (err)
-+ return err;
-+
-+ ctx->enc_keylen = keylen;
-+ memcpy(ctx->enc_key, key, keylen);
-+ return 0;
-+}
-+
-+static int qce_skcipher_crypt(struct skcipher_request *req, int encrypt)
-+{
-+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
-+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
-+ struct qce_alg_template *tmpl = to_cipher_tmpl(tfm);
-+ int ret;
-+
-+ rctx->flags = tmpl->alg_flags;
-+ rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
-+
-+ if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 &&
-+ ctx->enc_keylen != AES_KEYSIZE_256) {
-+ SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
-+
-+ skcipher_request_set_sync_tfm(subreq, ctx->fallback);
-+ skcipher_request_set_callback(subreq, req->base.flags,
-+ NULL, NULL);
-+ skcipher_request_set_crypt(subreq, req->src, req->dst,
-+ req->cryptlen, req->iv);
-+ ret = encrypt ? crypto_skcipher_encrypt(subreq) :
-+ crypto_skcipher_decrypt(subreq);
-+ skcipher_request_zero(subreq);
-+ return ret;
-+ }
-+
-+ return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base);
-+}
-+
-+static int qce_skcipher_encrypt(struct skcipher_request *req)
-+{
-+ return qce_skcipher_crypt(req, 1);
-+}
-+
-+static int qce_skcipher_decrypt(struct skcipher_request *req)
-+{
-+ return qce_skcipher_crypt(req, 0);
-+}
-+
-+static int qce_skcipher_init(struct crypto_skcipher *tfm)
-+{
-+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
-+
-+ memset(ctx, 0, sizeof(*ctx));
-+ crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx));
-+
-+ ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(&tfm->base),
-+ 0, CRYPTO_ALG_NEED_FALLBACK);
-+ return PTR_ERR_OR_ZERO(ctx->fallback);
-+}
-+
-+static void qce_skcipher_exit(struct crypto_skcipher *tfm)
-+{
-+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
-+
-+ crypto_free_sync_skcipher(ctx->fallback);
-+}
-+
-+struct qce_skcipher_def {
-+ unsigned long flags;
-+ const char *name;
-+ const char *drv_name;
-+ unsigned int blocksize;
-+ unsigned int ivsize;
-+ unsigned int min_keysize;
-+ unsigned int max_keysize;
-+};
-+
-+static const struct qce_skcipher_def skcipher_def[] = {
-+ {
-+ .flags = QCE_ALG_AES | QCE_MODE_ECB,
-+ .name = "ecb(aes)",
-+ .drv_name = "ecb-aes-qce",
-+ .blocksize = AES_BLOCK_SIZE,
-+ .ivsize = AES_BLOCK_SIZE,
-+ .min_keysize = AES_MIN_KEY_SIZE,
-+ .max_keysize = AES_MAX_KEY_SIZE,
-+ },
-+ {
-+ .flags = QCE_ALG_AES | QCE_MODE_CBC,
-+ .name = "cbc(aes)",
-+ .drv_name = "cbc-aes-qce",
-+ .blocksize = AES_BLOCK_SIZE,
-+ .ivsize = AES_BLOCK_SIZE,
-+ .min_keysize = AES_MIN_KEY_SIZE,
-+ .max_keysize = AES_MAX_KEY_SIZE,
-+ },
-+ {
-+ .flags = QCE_ALG_AES | QCE_MODE_CTR,
-+ .name = "ctr(aes)",
-+ .drv_name = "ctr-aes-qce",
-+ .blocksize = AES_BLOCK_SIZE,
-+ .ivsize = AES_BLOCK_SIZE,
-+ .min_keysize = AES_MIN_KEY_SIZE,
-+ .max_keysize = AES_MAX_KEY_SIZE,
-+ },
-+ {
-+ .flags = QCE_ALG_AES | QCE_MODE_XTS,
-+ .name = "xts(aes)",
-+ .drv_name = "xts-aes-qce",
-+ .blocksize = AES_BLOCK_SIZE,
-+ .ivsize = AES_BLOCK_SIZE,
-+ .min_keysize = AES_MIN_KEY_SIZE,
-+ .max_keysize = AES_MAX_KEY_SIZE,
-+ },
-+ {
-+ .flags = QCE_ALG_DES | QCE_MODE_ECB,
-+ .name = "ecb(des)",
-+ .drv_name = "ecb-des-qce",
-+ .blocksize = DES_BLOCK_SIZE,
-+ .ivsize = 0,
-+ .min_keysize = DES_KEY_SIZE,
-+ .max_keysize = DES_KEY_SIZE,
-+ },
-+ {
-+ .flags = QCE_ALG_DES | QCE_MODE_CBC,
-+ .name = "cbc(des)",
-+ .drv_name = "cbc-des-qce",
-+ .blocksize = DES_BLOCK_SIZE,
-+ .ivsize = DES_BLOCK_SIZE,
-+ .min_keysize = DES_KEY_SIZE,
-+ .max_keysize = DES_KEY_SIZE,
-+ },
-+ {
-+ .flags = QCE_ALG_3DES | QCE_MODE_ECB,
-+ .name = "ecb(des3_ede)",
-+ .drv_name = "ecb-3des-qce",
-+ .blocksize = DES3_EDE_BLOCK_SIZE,
-+ .ivsize = 0,
-+ .min_keysize = DES3_EDE_KEY_SIZE,
-+ .max_keysize = DES3_EDE_KEY_SIZE,
-+ },
-+ {
-+ .flags = QCE_ALG_3DES | QCE_MODE_CBC,
-+ .name = "cbc(des3_ede)",
-+ .drv_name = "cbc-3des-qce",
-+ .blocksize = DES3_EDE_BLOCK_SIZE,
-+ .ivsize = DES3_EDE_BLOCK_SIZE,
-+ .min_keysize = DES3_EDE_KEY_SIZE,
-+ .max_keysize = DES3_EDE_KEY_SIZE,
-+ },
-+};
-+
-+static int qce_skcipher_register_one(const struct qce_skcipher_def *def,
-+ struct qce_device *qce)
-+{
-+ struct qce_alg_template *tmpl;
-+ struct skcipher_alg *alg;
-+ int ret;
-+
-+ tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL);
-+ if (!tmpl)
-+ return -ENOMEM;
-+
-+ alg = &tmpl->alg.skcipher;
-+
-+ snprintf(alg->base.cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name);
-+ snprintf(alg->base.cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s",
-+ def->drv_name);
-+
-+ alg->base.cra_blocksize = def->blocksize;
-+ alg->ivsize = def->ivsize;
-+ alg->min_keysize = def->min_keysize;
-+ alg->max_keysize = def->max_keysize;
-+ alg->setkey = IS_3DES(def->flags) ? qce_des3_setkey :
-+ IS_DES(def->flags) ? qce_des_setkey :
-+ qce_skcipher_setkey;
-+ alg->encrypt = qce_skcipher_encrypt;
-+ alg->decrypt = qce_skcipher_decrypt;
-+
-+ alg->base.cra_priority = 300;
-+ alg->base.cra_flags = CRYPTO_ALG_ASYNC |
-+ CRYPTO_ALG_NEED_FALLBACK |
-+ CRYPTO_ALG_KERN_DRIVER_ONLY;
-+ alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx);
-+ alg->base.cra_alignmask = 0;
-+ alg->base.cra_module = THIS_MODULE;
-+
-+ alg->init = qce_skcipher_init;
-+ alg->exit = qce_skcipher_exit;
-+
-+ INIT_LIST_HEAD(&tmpl->entry);
-+ tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER;
-+ tmpl->alg_flags = def->flags;
-+ tmpl->qce = qce;
-+
-+ ret = crypto_register_skcipher(alg);
-+ if (ret) {
-+ kfree(tmpl);
-+ dev_err(qce->dev, "%s registration failed\n", alg->base.cra_name);
-+ return ret;
-+ }
-+
-+ list_add_tail(&tmpl->entry, &skcipher_algs);
-+ dev_dbg(qce->dev, "%s is registered\n", alg->base.cra_name);
-+ return 0;
-+}
-+
-+static void qce_skcipher_unregister(struct qce_device *qce)
-+{
-+ struct qce_alg_template *tmpl, *n;
-+
-+ list_for_each_entry_safe(tmpl, n, &skcipher_algs, entry) {
-+ crypto_unregister_skcipher(&tmpl->alg.skcipher);
-+ list_del(&tmpl->entry);
-+ kfree(tmpl);
-+ }
-+}
-+
-+static int qce_skcipher_register(struct qce_device *qce)
-+{
-+ int ret, i;
-+
-+ for (i = 0; i < ARRAY_SIZE(skcipher_def); i++) {
-+ ret = qce_skcipher_register_one(&skcipher_def[i], qce);
-+ if (ret)
-+ goto err;
-+ }
-+
-+ return 0;
-+err:
-+ qce_skcipher_unregister(qce);
-+ return ret;
-+}
-+
-+const struct qce_algo_ops skcipher_ops = {
-+ .type = CRYPTO_ALG_TYPE_SKCIPHER,
-+ .register_algs = qce_skcipher_register,
-+ .unregister_algs = qce_skcipher_unregister,
-+ .async_req_handle = qce_skcipher_async_req_handle,
-+};
diff --git a/target/linux/ipq40xx/patches-5.10/0008-v5.6-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch b/target/linux/ipq40xx/patches-5.10/0008-v5.6-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch
deleted file mode 100644
index ac4f163f4a..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0008-v5.6-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From bb5c863b3d3cbd10e80b2ebf409934a091058f54 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Date: Fri, 20 Dec 2019 16:02:13 -0300
-Subject: [PATCH 02/11] crypto: qce - fix ctr-aes-qce block, chunk sizes
-
-Set blocksize of ctr-aes-qce to 1, so it can operate as a stream cipher,
-adding the definition for chucksize instead, where the underlying block
-size belongs.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Signed-off-by: Herbert Xu <herbert at gondor.apana.org.au>
----
- drivers/crypto/qce/skcipher.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -270,6 +270,7 @@ struct qce_skcipher_def {
- const char *name;
- const char *drv_name;
- unsigned int blocksize;
-+ unsigned int chunksize;
- unsigned int ivsize;
- unsigned int min_keysize;
- unsigned int max_keysize;
-@@ -298,7 +299,8 @@ static const struct qce_skcipher_def skc
- .flags = QCE_ALG_AES | QCE_MODE_CTR,
- .name = "ctr(aes)",
- .drv_name = "ctr-aes-qce",
-- .blocksize = AES_BLOCK_SIZE,
-+ .blocksize = 1,
-+ .chunksize = AES_BLOCK_SIZE,
- .ivsize = AES_BLOCK_SIZE,
- .min_keysize = AES_MIN_KEY_SIZE,
- .max_keysize = AES_MAX_KEY_SIZE,
-@@ -368,6 +370,7 @@ static int qce_skcipher_register_one(con
- def->drv_name);
-
- alg->base.cra_blocksize = def->blocksize;
-+ alg->chunksize = def->chunksize;
- alg->ivsize = def->ivsize;
- alg->min_keysize = def->min_keysize;
- alg->max_keysize = def->max_keysize;
diff --git a/target/linux/ipq40xx/patches-5.10/0009-v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch b/target/linux/ipq40xx/patches-5.10/0009-v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch
deleted file mode 100644
index 4dcf1ac726..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0009-v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 7de4c2bd196f111e39cc60f6197654aff23ba2b4 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Date: Fri, 20 Dec 2019 16:02:14 -0300
-Subject: [PATCH 03/11] crypto: qce - fix xts-aes-qce key sizes
-
-XTS-mode uses two keys, so the keysizes should be doubled in
-skcipher_def, and halved when checking if it is AES-128/192/256.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Signed-off-by: Herbert Xu <herbert at gondor.apana.org.au>
----
- drivers/crypto/qce/skcipher.c | 13 ++++++++-----
- 1 file changed, 8 insertions(+), 5 deletions(-)
-
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -154,12 +154,13 @@ static int qce_skcipher_setkey(struct cr
- {
- struct crypto_tfm *tfm = crypto_skcipher_tfm(ablk);
- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
-+ unsigned long flags = to_cipher_tmpl(ablk)->alg_flags;
- int ret;
-
- if (!key || !keylen)
- return -EINVAL;
-
-- switch (keylen) {
-+ switch (IS_XTS(flags) ? keylen >> 1 : keylen) {
- case AES_KEYSIZE_128:
- case AES_KEYSIZE_256:
- break;
-@@ -213,13 +214,15 @@ static int qce_skcipher_crypt(struct skc
- struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
- struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
- struct qce_alg_template *tmpl = to_cipher_tmpl(tfm);
-+ int keylen;
- int ret;
-
- rctx->flags = tmpl->alg_flags;
- rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
-+ keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen;
-
-- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 &&
-- ctx->enc_keylen != AES_KEYSIZE_256) {
-+ if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 &&
-+ keylen != AES_KEYSIZE_256) {
- SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
-
- skcipher_request_set_sync_tfm(subreq, ctx->fallback);
-@@ -311,8 +314,8 @@ static const struct qce_skcipher_def skc
- .drv_name = "xts-aes-qce",
- .blocksize = AES_BLOCK_SIZE,
- .ivsize = AES_BLOCK_SIZE,
-- .min_keysize = AES_MIN_KEY_SIZE,
-- .max_keysize = AES_MAX_KEY_SIZE,
-+ .min_keysize = AES_MIN_KEY_SIZE * 2,
-+ .max_keysize = AES_MAX_KEY_SIZE * 2,
- },
- {
- .flags = QCE_ALG_DES | QCE_MODE_ECB,
diff --git a/target/linux/ipq40xx/patches-5.10/0010-v5.6-crypto-qce-save-a-sg-table-slot-for-result-buf.patch b/target/linux/ipq40xx/patches-5.10/0010-v5.6-crypto-qce-save-a-sg-table-slot-for-result-buf.patch
deleted file mode 100644
index 2385d483f2..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0010-v5.6-crypto-qce-save-a-sg-table-slot-for-result-buf.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 3ee50c896d712dc2fc8f34c2cd1918d035e74045 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Date: Fri, 20 Dec 2019 16:02:15 -0300
-Subject: [PATCH 04/11] crypto: qce - save a sg table slot for result buf
-
-When ctr-aes-qce is used for gcm-mode, an extra sg entry for the
-authentication tag is present, causing trouble when the qce driver
-prepares the dst-results sg table for dma.
-
-It computes the number of entries needed with sg_nents_for_len, leaving
-out the tag entry. Then it creates a sg table with that number plus
-one, used to store a result buffer.
-
-When copying the sg table, there's no limit to the number of entries
-copied, so the extra slot is filled with the authentication tag sg.
-When the driver tries to add the result sg, the list is full, and it
-returns EINVAL.
-
-By limiting the number of sg entries copied to the dest table, the slot
-for the result buffer is guaranteed to be unused.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Signed-off-by: Herbert Xu <herbert at gondor.apana.org.au>
----
- drivers/crypto/qce/dma.c | 6 ++++--
- drivers/crypto/qce/dma.h | 3 ++-
- drivers/crypto/qce/skcipher.c | 4 ++--
- 3 files changed, 8 insertions(+), 5 deletions(-)
-
---- a/drivers/crypto/qce/dma.c
-+++ b/drivers/crypto/qce/dma.c
-@@ -47,7 +47,8 @@ void qce_dma_release(struct qce_dma_data
- }
-
- struct scatterlist *
--qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl)
-+qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl,
-+ int max_ents)
- {
- struct scatterlist *sg = sgt->sgl, *sg_last = NULL;
-
-@@ -60,12 +61,13 @@ qce_sgtable_add(struct sg_table *sgt, st
- if (!sg)
- return ERR_PTR(-EINVAL);
-
-- while (new_sgl && sg) {
-+ while (new_sgl && sg && max_ents) {
- sg_set_page(sg, sg_page(new_sgl), new_sgl->length,
- new_sgl->offset);
- sg_last = sg;
- sg = sg_next(sg);
- new_sgl = sg_next(new_sgl);
-+ max_ents--;
- }
-
- return sg_last;
---- a/drivers/crypto/qce/dma.h
-+++ b/drivers/crypto/qce/dma.h
-@@ -42,6 +42,7 @@ int qce_dma_prep_sgs(struct qce_dma_data
- void qce_dma_issue_pending(struct qce_dma_data *dma);
- int qce_dma_terminate_all(struct qce_dma_data *dma);
- struct scatterlist *
--qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add);
-+qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add,
-+ int max_ents);
-
- #endif /* _DMA_H_ */
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -95,13 +95,13 @@ qce_skcipher_async_req_handle(struct cry
-
- sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
-
-- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst);
-+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1);
- if (IS_ERR(sg)) {
- ret = PTR_ERR(sg);
- goto error_free;
- }
-
-- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg);
-+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1);
- if (IS_ERR(sg)) {
- ret = PTR_ERR(sg);
- goto error_free;
diff --git a/target/linux/ipq40xx/patches-5.10/0011-v5.6-crypto-qce-update-the-skcipher-IV.patch b/target/linux/ipq40xx/patches-5.10/0011-v5.6-crypto-qce-update-the-skcipher-IV.patch
deleted file mode 100644
index 5efdb72c44..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0011-v5.6-crypto-qce-update-the-skcipher-IV.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 3e806a12d10af2581aa26c37b58439286eab9782 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Date: Fri, 20 Dec 2019 16:02:16 -0300
-Subject: [PATCH 05/11] crypto: qce - update the skcipher IV
-
-Update the IV after the completion of each cipher operation.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Signed-off-by: Herbert Xu <herbert at gondor.apana.org.au>
----
- drivers/crypto/qce/skcipher.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -21,6 +21,7 @@ static void qce_skcipher_done(void *data
- struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
- struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
- struct qce_device *qce = tmpl->qce;
-+ struct qce_result_dump *result_buf = qce->dma.result_buf;
- enum dma_data_direction dir_src, dir_dst;
- u32 status;
- int error;
-@@ -45,6 +46,7 @@ static void qce_skcipher_done(void *data
- if (error < 0)
- dev_dbg(qce->dev, "skcipher operation error (%x)\n", status);
-
-+ memcpy(rctx->iv, result_buf->encr_cntr_iv, rctx->ivsize);
- qce->async_req_done(tmpl->qce, error);
- }
-
diff --git a/target/linux/ipq40xx/patches-5.10/0012-v5.6-crypto-qce-initialize-fallback-only-for-AES.patch b/target/linux/ipq40xx/patches-5.10/0012-v5.6-crypto-qce-initialize-fallback-only-for-AES.patch
deleted file mode 100644
index 84aef04ef4..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0012-v5.6-crypto-qce-initialize-fallback-only-for-AES.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 8ceda883205db6dfedb82e39f67feae3b50c95a1 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Date: Fri, 20 Dec 2019 16:02:17 -0300
-Subject: [PATCH 06/11] crypto: qce - initialize fallback only for AES
-
-Adjust cra_flags to add CRYPTO_NEED_FALLBACK only for AES ciphers, where
-AES-192 is not handled by the qce hardware, and don't allocate & free
-the fallback skcipher for other algorithms.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Signed-off-by: Herbert Xu <herbert at gondor.apana.org.au>
----
- drivers/crypto/qce/skcipher.c | 17 ++++++++++++++---
- 1 file changed, 14 insertions(+), 3 deletions(-)
-
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -257,7 +257,14 @@ static int qce_skcipher_init(struct cryp
-
- memset(ctx, 0, sizeof(*ctx));
- crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx));
-+ return 0;
-+}
-+
-+static int qce_skcipher_init_fallback(struct crypto_skcipher *tfm)
-+{
-+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-+ qce_skcipher_init(tfm);
- ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(&tfm->base),
- 0, CRYPTO_ALG_NEED_FALLBACK);
- return PTR_ERR_OR_ZERO(ctx->fallback);
-@@ -387,14 +394,18 @@ static int qce_skcipher_register_one(con
-
- alg->base.cra_priority = 300;
- alg->base.cra_flags = CRYPTO_ALG_ASYNC |
-- CRYPTO_ALG_NEED_FALLBACK |
- CRYPTO_ALG_KERN_DRIVER_ONLY;
- alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx);
- alg->base.cra_alignmask = 0;
- alg->base.cra_module = THIS_MODULE;
-
-- alg->init = qce_skcipher_init;
-- alg->exit = qce_skcipher_exit;
-+ if (IS_AES(def->flags)) {
-+ alg->base.cra_flags |= CRYPTO_ALG_NEED_FALLBACK;
-+ alg->init = qce_skcipher_init_fallback;
-+ alg->exit = qce_skcipher_exit;
-+ } else {
-+ alg->init = qce_skcipher_init;
-+ }
-
- INIT_LIST_HEAD(&tmpl->entry);
- tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER;
diff --git a/target/linux/ipq40xx/patches-5.10/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch b/target/linux/ipq40xx/patches-5.10/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch
deleted file mode 100644
index 5b1372d08f..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch
+++ /dev/null
@@ -1,419 +0,0 @@
-From 59e056cda4beb5412e3653e6360c2eb0fa770baa Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Date: Fri, 20 Dec 2019 16:02:18 -0300
-Subject: [PATCH 07/11] crypto: qce - allow building only hashes/ciphers
-
-Allow the user to choose whether to build support for all algorithms
-(default), hashes-only, or skciphers-only.
-
-The QCE engine does not appear to scale as well as the CPU to handle
-multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the
-QCE handles only 2 requests in parallel.
-
-Ipsec throughput seems to improve when disabling either family of
-algorithms, sharing the load with the CPU. Enabling skciphers-only
-appears to work best.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Signed-off-by: Herbert Xu <herbert at gondor.apana.org.au>
----
-
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -617,6 +617,14 @@ config CRYPTO_DEV_QCE
- tristate "Qualcomm crypto engine accelerator"
- depends on ARCH_QCOM || COMPILE_TEST
- depends on HAS_IOMEM
-+ help
-+ This driver supports Qualcomm crypto engine accelerator
-+ hardware. To compile this driver as a module, choose M here. The
-+ module will be called qcrypto.
-+
-+config CRYPTO_DEV_QCE_SKCIPHER
-+ bool
-+ depends on CRYPTO_DEV_QCE
- select CRYPTO_AES
- select CRYPTO_LIB_DES
- select CRYPTO_ECB
-@@ -624,10 +632,57 @@ config CRYPTO_DEV_QCE
- select CRYPTO_XTS
- select CRYPTO_CTR
- select CRYPTO_BLKCIPHER
-+
-+config CRYPTO_DEV_QCE_SHA
-+ bool
-+ depends on CRYPTO_DEV_QCE
-+
-+choice
-+ prompt "Algorithms enabled for QCE acceleration"
-+ default CRYPTO_DEV_QCE_ENABLE_ALL
-+ depends on CRYPTO_DEV_QCE
- help
-- This driver supports Qualcomm crypto engine accelerator
-- hardware. To compile this driver as a module, choose M here. The
-- module will be called qcrypto.
-+ This option allows to choose whether to build support for all algorihtms
-+ (default), hashes-only, or skciphers-only.
-+
-+ The QCE engine does not appear to scale as well as the CPU to handle
-+ multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the
-+ QCE handles only 2 requests in parallel.
-+
-+ Ipsec throughput seems to improve when disabling either family of
-+ algorithms, sharing the load with the CPU. Enabling skciphers-only
-+ appears to work best.
-+
-+ config CRYPTO_DEV_QCE_ENABLE_ALL
-+ bool "All supported algorithms"
-+ select CRYPTO_DEV_QCE_SKCIPHER
-+ select CRYPTO_DEV_QCE_SHA
-+ help
-+ Enable all supported algorithms:
-+ - AES (CBC, CTR, ECB, XTS)
-+ - 3DES (CBC, ECB)
-+ - DES (CBC, ECB)
-+ - SHA1, HMAC-SHA1
-+ - SHA256, HMAC-SHA256
-+
-+ config CRYPTO_DEV_QCE_ENABLE_SKCIPHER
-+ bool "Symmetric-key ciphers only"
-+ select CRYPTO_DEV_QCE_SKCIPHER
-+ help
-+ Enable symmetric-key ciphers only:
-+ - AES (CBC, CTR, ECB, XTS)
-+ - 3DES (ECB, CBC)
-+ - DES (ECB, CBC)
-+
-+ config CRYPTO_DEV_QCE_ENABLE_SHA
-+ bool "Hash/HMAC only"
-+ select CRYPTO_DEV_QCE_SHA
-+ help
-+ Enable hashes/HMAC algorithms only:
-+ - SHA1, HMAC-SHA1
-+ - SHA256, HMAC-SHA256
-+
-+endchoice
-
- config CRYPTO_DEV_QCOM_RNG
- tristate "Qualcomm Random Number Generator Driver"
---- a/drivers/crypto/qce/Makefile
-+++ b/drivers/crypto/qce/Makefile
-@@ -2,6 +2,7 @@
- obj-$(CONFIG_CRYPTO_DEV_QCE) += qcrypto.o
- qcrypto-objs := core.o \
- common.o \
-- dma.o \
-- sha.o \
-- skcipher.o
-+ dma.o
-+
-+qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SHA) += sha.o
-+qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SKCIPHER) += skcipher.o
---- a/drivers/crypto/qce/common.c
-+++ b/drivers/crypto/qce/common.c
-@@ -45,52 +45,56 @@ qce_clear_array(struct qce_device *qce,
- qce_write(qce, offset + i * sizeof(u32), 0);
- }
-
--static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size)
-+static u32 qce_config_reg(struct qce_device *qce, int little)
- {
-- u32 cfg = 0;
-+ u32 beats = (qce->burst_size >> 3) - 1;
-+ u32 pipe_pair = qce->pipe_pair_id;
-+ u32 config;
-
-- if (IS_AES(flags)) {
-- if (aes_key_size == AES_KEYSIZE_128)
-- cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT;
-- else if (aes_key_size == AES_KEYSIZE_256)
-- cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT;
-- }
-+ config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK;
-+ config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) |
-+ BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT);
-+ config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK;
-+ config &= ~HIGH_SPD_EN_N_SHIFT;
-
-- if (IS_AES(flags))
-- cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT;
-- else if (IS_DES(flags) || IS_3DES(flags))
-- cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT;
-+ if (little)
-+ config |= BIT(LITTLE_ENDIAN_MODE_SHIFT);
-
-- if (IS_DES(flags))
-- cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT;
-+ return config;
-+}
-
-- if (IS_3DES(flags))
-- cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT;
-+void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len)
-+{
-+ __be32 *d = dst;
-+ const u8 *s = src;
-+ unsigned int n;
-
-- switch (flags & QCE_MODE_MASK) {
-- case QCE_MODE_ECB:
-- cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT;
-- break;
-- case QCE_MODE_CBC:
-- cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT;
-- break;
-- case QCE_MODE_CTR:
-- cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT;
-- break;
-- case QCE_MODE_XTS:
-- cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT;
-- break;
-- case QCE_MODE_CCM:
-- cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT;
-- cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT;
-- break;
-- default:
-- return ~0;
-+ n = len / sizeof(u32);
-+ for (; n > 0; n--) {
-+ *d = cpu_to_be32p((const __u32 *) s);
-+ s += sizeof(__u32);
-+ d++;
- }
-+}
-
-- return cfg;
-+static void qce_setup_config(struct qce_device *qce)
-+{
-+ u32 config;
-+
-+ /* get big endianness */
-+ config = qce_config_reg(qce, 0);
-+
-+ /* clear status */
-+ qce_write(qce, REG_STATUS, 0);
-+ qce_write(qce, REG_CONFIG, config);
-+}
-+
-+static inline void qce_crypto_go(struct qce_device *qce)
-+{
-+ qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT));
- }
-
-+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
- static u32 qce_auth_cfg(unsigned long flags, u32 key_size)
- {
- u32 cfg = 0;
-@@ -137,88 +141,6 @@ static u32 qce_auth_cfg(unsigned long fl
- return cfg;
- }
-
--static u32 qce_config_reg(struct qce_device *qce, int little)
--{
-- u32 beats = (qce->burst_size >> 3) - 1;
-- u32 pipe_pair = qce->pipe_pair_id;
-- u32 config;
--
-- config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK;
-- config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) |
-- BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT);
-- config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK;
-- config &= ~HIGH_SPD_EN_N_SHIFT;
--
-- if (little)
-- config |= BIT(LITTLE_ENDIAN_MODE_SHIFT);
--
-- return config;
--}
--
--void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len)
--{
-- __be32 *d = dst;
-- const u8 *s = src;
-- unsigned int n;
--
-- n = len / sizeof(u32);
-- for (; n > 0; n--) {
-- *d = cpu_to_be32p((const __u32 *) s);
-- s += sizeof(__u32);
-- d++;
-- }
--}
--
--static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize)
--{
-- u8 swap[QCE_AES_IV_LENGTH];
-- u32 i, j;
--
-- if (ivsize > QCE_AES_IV_LENGTH)
-- return;
--
-- memset(swap, 0, QCE_AES_IV_LENGTH);
--
-- for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1;
-- i < QCE_AES_IV_LENGTH; i++, j--)
-- swap[i] = src[j];
--
-- qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH);
--}
--
--static void qce_xtskey(struct qce_device *qce, const u8 *enckey,
-- unsigned int enckeylen, unsigned int cryptlen)
--{
-- u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0};
-- unsigned int xtsklen = enckeylen / (2 * sizeof(u32));
-- unsigned int xtsdusize;
--
-- qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2,
-- enckeylen / 2);
-- qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen);
--
-- /* xts du size 512B */
-- xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen);
-- qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize);
--}
--
--static void qce_setup_config(struct qce_device *qce)
--{
-- u32 config;
--
-- /* get big endianness */
-- config = qce_config_reg(qce, 0);
--
-- /* clear status */
-- qce_write(qce, REG_STATUS, 0);
-- qce_write(qce, REG_CONFIG, config);
--}
--
--static inline void qce_crypto_go(struct qce_device *qce)
--{
-- qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT));
--}
--
- static int qce_setup_regs_ahash(struct crypto_async_request *async_req,
- u32 totallen, u32 offset)
- {
-@@ -303,6 +225,87 @@ go_proc:
-
- return 0;
- }
-+#endif
-+
-+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
-+static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size)
-+{
-+ u32 cfg = 0;
-+
-+ if (IS_AES(flags)) {
-+ if (aes_key_size == AES_KEYSIZE_128)
-+ cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT;
-+ else if (aes_key_size == AES_KEYSIZE_256)
-+ cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT;
-+ }
-+
-+ if (IS_AES(flags))
-+ cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT;
-+ else if (IS_DES(flags) || IS_3DES(flags))
-+ cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT;
-+
-+ if (IS_DES(flags))
-+ cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT;
-+
-+ if (IS_3DES(flags))
-+ cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT;
-+
-+ switch (flags & QCE_MODE_MASK) {
-+ case QCE_MODE_ECB:
-+ cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT;
-+ break;
-+ case QCE_MODE_CBC:
-+ cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT;
-+ break;
-+ case QCE_MODE_CTR:
-+ cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT;
-+ break;
-+ case QCE_MODE_XTS:
-+ cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT;
-+ break;
-+ case QCE_MODE_CCM:
-+ cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT;
-+ cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT;
-+ break;
-+ default:
-+ return ~0;
-+ }
-+
-+ return cfg;
-+}
-+
-+static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize)
-+{
-+ u8 swap[QCE_AES_IV_LENGTH];
-+ u32 i, j;
-+
-+ if (ivsize > QCE_AES_IV_LENGTH)
-+ return;
-+
-+ memset(swap, 0, QCE_AES_IV_LENGTH);
-+
-+ for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1;
-+ i < QCE_AES_IV_LENGTH; i++, j--)
-+ swap[i] = src[j];
-+
-+ qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH);
-+}
-+
-+static void qce_xtskey(struct qce_device *qce, const u8 *enckey,
-+ unsigned int enckeylen, unsigned int cryptlen)
-+{
-+ u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0};
-+ unsigned int xtsklen = enckeylen / (2 * sizeof(u32));
-+ unsigned int xtsdusize;
-+
-+ qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2,
-+ enckeylen / 2);
-+ qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen);
-+
-+ /* xts du size 512B */
-+ xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen);
-+ qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize);
-+}
-
- static int qce_setup_regs_skcipher(struct crypto_async_request *async_req,
- u32 totallen, u32 offset)
-@@ -384,15 +387,20 @@ static int qce_setup_regs_skcipher(struc
-
- return 0;
- }
-+#endif
-
- int qce_start(struct crypto_async_request *async_req, u32 type, u32 totallen,
- u32 offset)
- {
- switch (type) {
-+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
- case CRYPTO_ALG_TYPE_SKCIPHER:
- return qce_setup_regs_skcipher(async_req, totallen, offset);
-+#endif
-+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
- case CRYPTO_ALG_TYPE_AHASH:
- return qce_setup_regs_ahash(async_req, totallen, offset);
-+#endif
- default:
- return -EINVAL;
- }
---- a/drivers/crypto/qce/core.c
-+++ b/drivers/crypto/qce/core.c
-@@ -22,8 +22,12 @@
- #define QCE_QUEUE_LENGTH 1
-
- static const struct qce_algo_ops *qce_ops[] = {
-+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
- &skcipher_ops,
-+#endif
-+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
- &ahash_ops,
-+#endif
- };
-
- static void qce_unregister_algs(struct qce_device *qce)
diff --git a/target/linux/ipq40xx/patches-5.10/0014-v5.7-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch b/target/linux/ipq40xx/patches-5.10/0014-v5.7-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch
deleted file mode 100644
index 160420b485..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0014-v5.7-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From d6364b8128439a8c0e381f80c38667de9f15eef8 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Date: Fri, 7 Feb 2020 12:02:25 -0300
-Subject: [PATCH 09/11] crypto: qce - use cryptlen when adding extra sgl
-
-The qce crypto driver appends an extra entry to the dst sgl, to maintain
-private state information.
-
-When the gcm driver sends requests to the ctr skcipher, it passes the
-authentication tag after the actual crypto payload, but it must not be
-touched.
-
-Commit 1336c2221bee ("crypto: qce - save a sg table slot for result
-buf") limited the destination sgl to avoid overwriting the
-authentication tag but it assumed the tag would be in a separate sgl
-entry.
-
-This is not always the case, so it is better to limit the length of the
-destination buffer to req->cryptlen before appending the result buf.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Signed-off-by: Herbert Xu <herbert at gondor.apana.org.au>
----
- drivers/crypto/qce/dma.c | 11 ++++++-----
- drivers/crypto/qce/dma.h | 2 +-
- drivers/crypto/qce/skcipher.c | 5 +++--
- 3 files changed, 10 insertions(+), 8 deletions(-)
-
---- a/drivers/crypto/qce/dma.c
-+++ b/drivers/crypto/qce/dma.c
-@@ -48,9 +48,10 @@ void qce_dma_release(struct qce_dma_data
-
- struct scatterlist *
- qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl,
-- int max_ents)
-+ unsigned int max_len)
- {
- struct scatterlist *sg = sgt->sgl, *sg_last = NULL;
-+ unsigned int new_len;
-
- while (sg) {
- if (!sg_page(sg))
-@@ -61,13 +62,13 @@ qce_sgtable_add(struct sg_table *sgt, st
- if (!sg)
- return ERR_PTR(-EINVAL);
-
-- while (new_sgl && sg && max_ents) {
-- sg_set_page(sg, sg_page(new_sgl), new_sgl->length,
-- new_sgl->offset);
-+ while (new_sgl && sg && max_len) {
-+ new_len = new_sgl->length > max_len ? max_len : new_sgl->length;
-+ sg_set_page(sg, sg_page(new_sgl), new_len, new_sgl->offset);
- sg_last = sg;
- sg = sg_next(sg);
- new_sgl = sg_next(new_sgl);
-- max_ents--;
-+ max_len -= new_len;
- }
-
- return sg_last;
---- a/drivers/crypto/qce/dma.h
-+++ b/drivers/crypto/qce/dma.h
-@@ -43,6 +43,6 @@ void qce_dma_issue_pending(struct qce_dm
- int qce_dma_terminate_all(struct qce_dma_data *dma);
- struct scatterlist *
- qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add,
-- int max_ents);
-+ unsigned int max_len);
-
- #endif /* _DMA_H_ */
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -97,13 +97,14 @@ qce_skcipher_async_req_handle(struct cry
-
- sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
-
-- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1);
-+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, req->cryptlen);
- if (IS_ERR(sg)) {
- ret = PTR_ERR(sg);
- goto error_free;
- }
-
-- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1);
-+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg,
-+ QCE_RESULT_BUF_SZ);
- if (IS_ERR(sg)) {
- ret = PTR_ERR(sg);
- goto error_free;
diff --git a/target/linux/ipq40xx/patches-5.10/0015-v5.7-crypto-qce-use-AES-fallback-for-small-requests.patch b/target/linux/ipq40xx/patches-5.10/0015-v5.7-crypto-qce-use-AES-fallback-for-small-requests.patch
deleted file mode 100644
index 0b5c8c6d66..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0015-v5.7-crypto-qce-use-AES-fallback-for-small-requests.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From ce163ba0bf298f1707321ac025ef639f88e62801 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Date: Fri, 7 Feb 2020 12:02:26 -0300
-Subject: [PATCH 10/11] crypto: qce - use AES fallback for small requests
-
-Process small blocks using the fallback cipher, as a workaround for an
-observed failure (DMA-related, apparently) when computing the GCM ghash
-key. This brings a speed gain as well, since it avoids the latency of
-using the hardware engine to process small blocks.
-
-Using software for all 16-byte requests would be enough to make GCM
-work, but to increase performance, a larger threshold would be better.
-Measuring the performance of supported ciphers with openssl speed,
-software matches hardware at around 768-1024 bytes.
-
-Considering the 256-bit ciphers, software is 2-3 times faster than qce
-at 256-bytes, 30% faster at 512, and about even at 768-bytes. With
-128-bit keys, the break-even point would be around 1024-bytes.
-
-This adds the 'aes_sw_max_len' parameter, to set the largest request
-length processed by the software fallback. Its default is being set to
-512 bytes, a little lower than the break-even point, to balance the cost
-in CPU usage.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Signed-off-by: Herbert Xu <herbert at gondor.apana.org.au>
----
-
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -684,6 +684,29 @@ choice
-
- endchoice
-
-+config CRYPTO_DEV_QCE_SW_MAX_LEN
-+ int "Default maximum request size to use software for AES"
-+ depends on CRYPTO_DEV_QCE && CRYPTO_DEV_QCE_SKCIPHER
-+ default 512
-+ help
-+ This sets the default maximum request size to perform AES requests
-+ using software instead of the crypto engine. It can be changed by
-+ setting the aes_sw_max_len parameter.
-+
-+ Small blocks are processed faster in software than hardware.
-+ Considering the 256-bit ciphers, software is 2-3 times faster than
-+ qce at 256-bytes, 30% faster at 512, and about even at 768-bytes.
-+ With 128-bit keys, the break-even point would be around 1024-bytes.
-+
-+ The default is set a little lower, to 512 bytes, to balance the
-+ cost in CPU usage. The minimum recommended setting is 16-bytes
-+ (1 AES block), since AES-GCM will fail if you set it lower.
-+ Setting this to zero will send all requests to the hardware.
-+
-+ Note that 192-bit keys are not supported by the hardware and are
-+ always processed by the software fallback, and all DES requests
-+ are done by the hardware.
-+
- config CRYPTO_DEV_QCOM_RNG
- tristate "Qualcomm Random Number Generator Driver"
- depends on ARCH_QCOM || COMPILE_TEST
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -5,6 +5,7 @@
-
- #include <linux/device.h>
- #include <linux/interrupt.h>
-+#include <linux/moduleparam.h>
- #include <linux/types.h>
- #include <crypto/aes.h>
- #include <crypto/internal/des.h>
-@@ -12,6 +13,13 @@
-
- #include "cipher.h"
-
-+static unsigned int aes_sw_max_len = CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN;
-+module_param(aes_sw_max_len, uint, 0644);
-+MODULE_PARM_DESC(aes_sw_max_len,
-+ "Only use hardware for AES requests larger than this "
-+ "[0=always use hardware; anything <16 breaks AES-GCM; default="
-+ __stringify(CONFIG_CRYPTO_DEV_QCE_SOFT_THRESHOLD)"]");
-+
- static LIST_HEAD(skcipher_algs);
-
- static void qce_skcipher_done(void *data)
-@@ -166,15 +174,10 @@ static int qce_skcipher_setkey(struct cr
- switch (IS_XTS(flags) ? keylen >> 1 : keylen) {
- case AES_KEYSIZE_128:
- case AES_KEYSIZE_256:
-+ memcpy(ctx->enc_key, key, keylen);
- break;
-- default:
-- goto fallback;
- }
-
-- ctx->enc_keylen = keylen;
-- memcpy(ctx->enc_key, key, keylen);
-- return 0;
--fallback:
- ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen);
- if (!ret)
- ctx->enc_keylen = keylen;
-@@ -224,8 +227,9 @@ static int qce_skcipher_crypt(struct skc
- rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
- keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen;
-
-- if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 &&
-- keylen != AES_KEYSIZE_256) {
-+ if (IS_AES(rctx->flags) &&
-+ ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) ||
-+ req->cryptlen <= aes_sw_max_len)) {
- SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
-
- skcipher_request_set_sync_tfm(subreq, ctx->fallback);
diff --git a/target/linux/ipq40xx/patches-5.10/0016-v5.7-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch b/target/linux/ipq40xx/patches-5.10/0016-v5.7-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch
deleted file mode 100644
index 18beda6296..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0016-v5.7-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 7f19380b2cfd412dcef2facefb3f6c62788864d7 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Date: Fri, 7 Feb 2020 12:02:27 -0300
-Subject: [PATCH 11/11] crypto: qce - handle AES-XTS cases that qce fails
-
-QCE hangs when presented with an AES-XTS request whose length is larger
-than QCE_SECTOR_SIZE (512-bytes), and is not a multiple of it. Let the
-fallback cipher handle them.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz at gmail.com>
-Signed-off-by: Herbert Xu <herbert at gondor.apana.org.au>
----
- drivers/crypto/qce/common.c | 2 --
- drivers/crypto/qce/common.h | 3 +++
- drivers/crypto/qce/skcipher.c | 9 +++++++--
- 3 files changed, 10 insertions(+), 4 deletions(-)
-
---- a/drivers/crypto/qce/common.c
-+++ b/drivers/crypto/qce/common.c
-@@ -15,8 +15,6 @@
- #include "regs-v5.h"
- #include "sha.h"
-
--#define QCE_SECTOR_SIZE 512
--
- static inline u32 qce_read(struct qce_device *qce, u32 offset)
- {
- return readl(qce->base + offset);
---- a/drivers/crypto/qce/common.h
-+++ b/drivers/crypto/qce/common.h
-@@ -12,6 +12,9 @@
- #include <crypto/hash.h>
- #include <crypto/internal/skcipher.h>
-
-+/* xts du size */
-+#define QCE_SECTOR_SIZE 512
-+
- /* key size in bytes */
- #define QCE_SHA_HMAC_KEY_SIZE 64
- #define QCE_MAX_CIPHER_KEY_SIZE AES_KEYSIZE_256
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -227,9 +227,14 @@ static int qce_skcipher_crypt(struct skc
- rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
- keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen;
-
-+ /* qce is hanging when AES-XTS request len > QCE_SECTOR_SIZE and
-+ * is not a multiple of it; pass such requests to the fallback
-+ */
- if (IS_AES(rctx->flags) &&
-- ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) ||
-- req->cryptlen <= aes_sw_max_len)) {
-+ (((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) ||
-+ req->cryptlen <= aes_sw_max_len) ||
-+ (IS_XTS(rctx->flags) && req->cryptlen > QCE_SECTOR_SIZE &&
-+ req->cryptlen % QCE_SECTOR_SIZE))) {
- SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
-
- skcipher_request_set_sync_tfm(subreq, ctx->fallback);
diff --git a/target/linux/ipq40xx/patches-5.10/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch b/target/linux/ipq40xx/patches-5.10/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch
deleted file mode 100644
index ad09a9f250..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch
+++ /dev/null
@@ -1,197 +0,0 @@
-From 3c9d8f6c03a2cda1849ec3c84f82ec030d1f49ef Mon Sep 17 00:00:00 2001
-From: Robert Marko <robert.marko at sartura.hr>
-Date: Sun, 3 May 2020 22:18:22 +0200
-Subject: [PATCH] phy: add driver for Qualcomm IPQ40xx USB PHY
-
-Add a driver to setup the USB PHY-s on Qualcom m IPQ40xx series SoCs.
-The driver sets up HS and SS phys.
-
-Signed-off-by: John Crispin <john at phrozen.org>
-Signed-off-by: Robert Marko <robert.marko at sartura.hr>
-Cc: Luka Perkov <luka.perkov at sartura.hr>
-Link: https://lore.kernel.org/r/20200503201823.531757-1-robert.marko@sartura.hr
-Signed-off-by: Vinod Koul <vkoul at kernel.org>
----
- drivers/phy/qualcomm/Kconfig | 7 +
- drivers/phy/qualcomm/Makefile | 1 +
- drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 148 ++++++++++++++++++++
- 3 files changed, 156 insertions(+)
- create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
-
---- a/drivers/phy/qualcomm/Kconfig
-+++ b/drivers/phy/qualcomm/Kconfig
-@@ -18,6 +18,13 @@ config PHY_QCOM_APQ8064_SATA
- depends on OF
- select GENERIC_PHY
-
-+config PHY_QCOM_IPQ4019_USB
-+ tristate "Qualcomm IPQ4019 USB PHY driver"
-+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
-+ select GENERIC_PHY
-+ help
-+ Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
-+
- config PHY_QCOM_IPQ806X_SATA
- tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
- depends on ARCH_QCOM
---- a/drivers/phy/qualcomm/Makefile
-+++ b/drivers/phy/qualcomm/Makefile
-@@ -1,6 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o
- obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
-+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
- obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
- obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o
- obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
---- /dev/null
-+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
-@@ -0,0 +1,148 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * Copyright (C) 2018 John Crispin <john at phrozen.org>
-+ *
-+ * Based on code from
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ *
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/reset.h>
-+
-+struct ipq4019_usb_phy {
-+ struct device *dev;
-+ struct phy *phy;
-+ void __iomem *base;
-+ struct reset_control *por_rst;
-+ struct reset_control *srif_rst;
-+};
-+
-+static int ipq4019_ss_phy_power_off(struct phy *_phy)
-+{
-+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
-+
-+ reset_control_assert(phy->por_rst);
-+ msleep(10);
-+
-+ return 0;
-+}
-+
-+static int ipq4019_ss_phy_power_on(struct phy *_phy)
-+{
-+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
-+
-+ ipq4019_ss_phy_power_off(_phy);
-+
-+ reset_control_deassert(phy->por_rst);
-+
-+ return 0;
-+}
-+
-+static struct phy_ops ipq4019_usb_ss_phy_ops = {
-+ .power_on = ipq4019_ss_phy_power_on,
-+ .power_off = ipq4019_ss_phy_power_off,
-+};
-+
-+static int ipq4019_hs_phy_power_off(struct phy *_phy)
-+{
-+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
-+
-+ reset_control_assert(phy->por_rst);
-+ msleep(10);
-+
-+ reset_control_assert(phy->srif_rst);
-+ msleep(10);
-+
-+ return 0;
-+}
-+
-+static int ipq4019_hs_phy_power_on(struct phy *_phy)
-+{
-+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
-+
-+ ipq4019_hs_phy_power_off(_phy);
-+
-+ reset_control_deassert(phy->srif_rst);
-+ msleep(10);
-+
-+ reset_control_deassert(phy->por_rst);
-+
-+ return 0;
-+}
-+
-+static struct phy_ops ipq4019_usb_hs_phy_ops = {
-+ .power_on = ipq4019_hs_phy_power_on,
-+ .power_off = ipq4019_hs_phy_power_off,
-+};
-+
-+static const struct of_device_id ipq4019_usb_phy_of_match[] = {
-+ { .compatible = "qcom,usb-hs-ipq4019-phy", .data = &ipq4019_usb_hs_phy_ops},
-+ { .compatible = "qcom,usb-ss-ipq4019-phy", .data = &ipq4019_usb_ss_phy_ops},
-+ { },
-+};
-+MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match);
-+
-+static int ipq4019_usb_phy_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct resource *res;
-+ struct phy_provider *phy_provider;
-+ struct ipq4019_usb_phy *phy;
-+
-+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
-+ if (!phy)
-+ return -ENOMEM;
-+
-+ phy->dev = &pdev->dev;
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ phy->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(phy->base)) {
-+ dev_err(dev, "failed to remap register memory\n");
-+ return PTR_ERR(phy->base);
-+ }
-+
-+ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst");
-+ if (IS_ERR(phy->por_rst)) {
-+ if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER)
-+ dev_err(dev, "POR reset is missing\n");
-+ return PTR_ERR(phy->por_rst);
-+ }
-+
-+ phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif_rst");
-+ if (IS_ERR(phy->srif_rst))
-+ return PTR_ERR(phy->srif_rst);
-+
-+ phy->phy = devm_phy_create(dev, NULL, of_device_get_match_data(dev));
-+ if (IS_ERR(phy->phy)) {
-+ dev_err(dev, "failed to create PHY\n");
-+ return PTR_ERR(phy->phy);
-+ }
-+ phy_set_drvdata(phy->phy, phy);
-+
-+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-+
-+ return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static struct platform_driver ipq4019_usb_phy_driver = {
-+ .probe = ipq4019_usb_phy_probe,
-+ .driver = {
-+ .of_match_table = ipq4019_usb_phy_of_match,
-+ .name = "ipq4019-usb-phy",
-+ }
-+};
-+module_platform_driver(ipq4019_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver");
-+MODULE_AUTHOR("John Crispin <john at phrozen.org>");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ipq40xx/patches-5.10/0018-v5.9-pinctrl-msm-open-drain.patch b/target/linux/ipq40xx/patches-5.10/0018-v5.9-pinctrl-msm-open-drain.patch
deleted file mode 100644
index 5cd4ccc30f..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0018-v5.9-pinctrl-msm-open-drain.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 5b08c1d567ee8e6af94696b3e549997cbdb2bb80 Mon Sep 17 00:00:00 2001
-From: Jaiganesh Narayanan <njaigane at codeaurora.org>
-Date: Thu, 1 Sep 2016 10:40:38 +0530
-Subject: [PATCH] pinctrl: qcom: ipq4019: add open drain support
-
-Signed-off-by: Jaiganesh Narayanan <njaigane at codeaurora.org>
-[ Brian: adapted from from the Chromium OS kernel used on IPQ4019-based
- WiFi APs. ]
-Signed-off-by: Brian Norris <computersforpeace at gmail.com>
----
-https://lore.kernel.org/linux-gpio/20200703080646.23233-1-computersforpeace@gmail.com/
-
- drivers/pinctrl/qcom/pinctrl-ipq4019.c | 1 +
- drivers/pinctrl/qcom/pinctrl-msm.c | 13 +++++++++++++
- drivers/pinctrl/qcom/pinctrl-msm.h | 2 ++
- 3 files changed, 16 insertions(+)
-
---- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c
-+++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
-@@ -254,6 +254,7 @@ DECLARE_QCA_GPIO_PINS(99);
- .mux_bit = 2, \
- .pull_bit = 0, \
- .drv_bit = 6, \
-+ .od_bit = 12, \
- .oe_bit = 9, \
- .in_bit = 0, \
- .out_bit = 1, \
---- a/drivers/pinctrl/qcom/pinctrl-msm.c
-+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
-@@ -225,6 +225,10 @@ static int msm_config_reg(struct msm_pin
- *bit = g->pull_bit;
- *mask = 3;
- break;
-+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
-+ *bit = g->od_bit;
-+ *mask = 1;
-+ break;
- case PIN_CONFIG_DRIVE_STRENGTH:
- *bit = g->drv_bit;
- *mask = 7;
-@@ -302,6 +306,12 @@ static int msm_config_group_get(struct p
- if (!arg)
- return -EINVAL;
- break;
-+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
-+ /* Pin is not open-drain */
-+ if (!arg)
-+ return -EINVAL;
-+ arg = 1;
-+ break;
- case PIN_CONFIG_DRIVE_STRENGTH:
- arg = msm_regval_to_drive(arg);
- break;
-@@ -374,6 +384,9 @@ static int msm_config_group_set(struct p
- else
- arg = MSM_PULL_UP;
- break;
-+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
-+ arg = 1;
-+ break;
- case PIN_CONFIG_DRIVE_STRENGTH:
- /* Check for invalid values */
- if (arg > 16 || arg < 2 || (arg % 2) != 0)
---- a/drivers/pinctrl/qcom/pinctrl-msm.h
-+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
-@@ -38,6 +38,7 @@ struct msm_function {
- * @mux_bit: Offset in @ctl_reg for the pinmux function selection.
- * @pull_bit: Offset in @ctl_reg for the bias configuration.
- * @drv_bit: Offset in @ctl_reg for the drive strength configuration.
-+ * @od_bit: Offset in @ctl_reg for controlling open drain.
- * @oe_bit: Offset in @ctl_reg for controlling output enable.
- * @in_bit: Offset in @io_reg for the input bit value.
- * @out_bit: Offset in @io_reg for the output bit value.
-@@ -75,6 +76,7 @@ struct msm_pingroup {
- unsigned pull_bit:5;
- unsigned drv_bit:5;
-
-+ unsigned od_bit:5;
- unsigned oe_bit:5;
- unsigned in_bit:5;
- unsigned out_bit:5;
diff --git a/target/linux/ipq40xx/patches-5.10/0019-v5.6-mtd-spi-nor-Add-support-for-mx25r3235f.patch b/target/linux/ipq40xx/patches-5.10/0019-v5.6-mtd-spi-nor-Add-support-for-mx25r3235f.patch
deleted file mode 100644
index f1be01c8e1..0000000000
--- a/target/linux/ipq40xx/patches-5.10/0019-v5.6-mtd-spi-nor-Add-support-for-mx25r3235f.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 707745e8d4e75b638b990d67950ab292b3b8ea2a Mon Sep 17 00:00:00 2001
-From: David Bauer <mail at david-bauer.net>
-Date: Mon, 16 Dec 2019 01:36:46 +0100
-Subject: [PATCH] mtd: spi-nor: Add support for mx25r3235f
-
-Add MTD support for the Macronix MX25R3235F SPI NOR chip from Macronix.
-The chip has 4MB of total capacity, divided into a total of 64 sectors,
-each 64KB sized. The chip also supports 4KB large sectors.
-Additionally, it supports dual and quad read modes.
-
-Functionality was verified on an HPE/Aruba AP-303 board.
-
-Signed-off-by: David Bauer <mail at david-bauer.net>
-Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2353,6 +2353,8 @@ static const struct flash_info spi_nor_i
- { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
- { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
-+ { "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64,
-+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512,
More information about the lede-commits
mailing list