[openwrt/openwrt] firmware-utils: tplink-safeloader: set EAP235-Wall v1 soft-version

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/46dec9952bb059156eaf5a82759ee32cc7cd6a0f

commit 46dec9952bb059156eaf5a82759ee32cc7cd6a0f
Author: Sander Vanheule <sander at svanheule.net>
AuthorDate: Fri Sep 10 10:57:19 2021 +0200

    firmware-utils: tplink-safeloader: set EAP235-Wall v1 soft-version
    
    Starting with v3 of the vendor firmware for the TP-Link EAP235-Wall v1,
    downgrades to firmware versions below v3 as not allowed.  Since OpenWrt
    uses version 0.0.0 as a default, this causes the factory install to fail
    on devices with a recent firmware. This failure is associated by the
    following message on the device's serial console:
    
        EAP235/230-Wall forbid fw reverted from 3.x.x to lower version!
    
    Vendor firmware (v3) also uses build and release numbers to compare
    images, so identical version numbers are very unlikely to cause issues.
    Bump the firmware version to 3.0.0 to ensure users can install OpenWrt
    on their devices.
    
    Reported-by: Colton Conor <colton.conor at gmail.com>
    Tested-by: Colton Conor <colton.conor at gmail.com>
    Signed-off-by: Sander Vanheule <sander at svanheule.net>
---
 tools/firmware-utils/src/tplink-safeloader.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index b3cfe39b2c..b20d1fdd30 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -1560,7 +1560,7 @@ static struct device_info boards[] = {
 			"SupportList:\r\n"
 			"EAP235-Wall(TP-Link|UN|AC1200-D):1.0\r\n",
 		.part_trail = PART_TRAIL_NONE,
-		.soft_ver = SOFT_VER_DEFAULT,
+		.soft_ver = SOFT_VER_NUMERIC(3, 0, 0),
 		.soft_ver_compat_level = 1,
 
 		.partitions = {