[openwrt/openwrt] ath79: mikrotik: enable SFP on RB921GS-5HPacD (mANTBox 15s)
LEDE Commits
lede-commits at lists.infradead.org
Sun Oct 31 16:16:45 PDT 2021
adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/6801b827e41dead8fe2e77654f4309ff7fcd47fa
commit 6801b827e41dead8fe2e77654f4309ff7fcd47fa
Author: Roger Pueyo Centelles <roger.pueyo at guifi.net>
AuthorDate: Wed Oct 27 19:40:45 2021 +0200
ath79: mikrotik: enable SFP on RB921GS-5HPacD (mANTBox 15s)
This patch enables the SFP cage on the MikroTik RouterBOARD 921GS-5HPacD
(mANTBox 15s).
The RB922UAGS-5HPacD had it already working, so the support code is
moved to the common DTSI file both devices share.
Tested on a RouterBOARD 921GS-5HPacD with a MikroTik S-53LC20D module.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo at guifi.net>
---
...qca9558_mikrotik_routerboard-922uags-5hpacd.dts | 48 ----------------------
.../dts/qca9558_mikrotik_routerboard-92x.dtsi | 48 ++++++++++++++++++++++
target/linux/ath79/image/mikrotik.mk | 3 +-
.../mikrotik/base-files/etc/board.d/02_network | 3 +-
4 files changed, 51 insertions(+), 51 deletions(-)
diff --git a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts
index 36979bbd33..8ad834fe61 100644
--- a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts
+++ b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts
@@ -23,27 +23,6 @@
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
};
-
- i2c: i2c {
- compatible = "i2c-gpio";
-
- sda-gpios = <&gpio 18 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpio 19 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <5>;
- i2c-gpio,timeout-ms = <1>;
- };
-
- sfp1: sfp {
- compatible = "sff,sfp";
-
- i2c-bus = <&i2c>;
- maximum-power-milliwatt = <1000>;
- los-gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- tx-disable-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- // Toggling GPIO16 actually enables/disables the transmitter,
- // but the SFP driver does not seem to be using it.
- };
};
&pcie0 {
@@ -76,30 +55,3 @@
&usb_phy1 {
status = "okay";
};
-
-&mdio1 {
- status = "okay";
-
- phy_sfp: ethernet-phy at 0 {
- reg = <0>;
- phy-mode = "sgmii";
- sfp = <&sfp1>;
- };
-};
-
-ð1 {
- status = "okay";
-
- phy-handle = <&phy_sfp>;
- pll-data = <0x03000000 0x00000101 0x00001616>;
- qca955x-sgmii-fixup;
-
- gmac-config {
- device = <&gmac>;
- };
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
diff --git a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi
index 5e919856a5..d71c12c1fd 100644
--- a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi
+++ b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi
@@ -42,6 +42,27 @@
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
};
};
+
+ i2c: i2c {
+ compatible = "i2c-gpio";
+
+ sda-gpios = <&gpio 18 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio 19 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <5>;
+ i2c-gpio,timeout-ms = <1>;
+ };
+
+ sfp1: sfp {
+ compatible = "sff,sfp";
+
+ i2c-bus = <&i2c>;
+ maximum-power-milliwatt = <1000>;
+ los-gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ // Toggling GPIO16 actually enables/disables the transmitter,
+ // but the SFP driver does not seem to be using it.
+ };
};
&mdio0 {
@@ -64,6 +85,33 @@
};
};
+&mdio1 {
+ status = "okay";
+
+ phy_sfp: ethernet-phy at 0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ sfp = <&sfp1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ phy-handle = <&phy_sfp>;
+ pll-data = <0x03000000 0x00000101 0x00001616>;
+ qca955x-sgmii-fixup;
+
+ gmac-config {
+ device = <&gmac>;
+ };
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
&spi {
status = "okay";
diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk
index 4256f77379..2324ecc195 100644
--- a/target/linux/ath79/image/mikrotik.mk
+++ b/target/linux/ath79/image/mikrotik.mk
@@ -22,7 +22,8 @@ define Device/mikrotik_routerboard-921gs-5hpacd-15s
$(Device/mikrotik_nand)
SOC := qca9558
DEVICE_MODEL := RouterBOARD 921GS-5HPacD-15s (mANTBox 15s)
- DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-i2c-gpio \
+ kmod-sfp
SUPPORTED_DEVICES += rb-921gs-5hpacd-r2
endef
TARGET_DEVICES += mikrotik_routerboard-921gs-5hpacd-15s
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
index d4a32c1e1a..4058742133 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
@@ -15,7 +15,6 @@ ath79_setup_interfaces()
"0 at eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
;;
mikrotik,routerboard-912uag-2hpnd|\
- mikrotik,routerboard-921gs-5hpacd-15s|\
mikrotik,routerboard-lhg-2nd|\
mikrotik,routerboard-sxt-5nd-r2|\
mikrotik,routerboard-wap-g-5hact2hnd|\
@@ -38,7 +37,6 @@ ath79_setup_macs()
case "$board" in
mikrotik,routerboard-912uag-2hpnd|\
- mikrotik,routerboard-921gs-5hpacd-15s|\
mikrotik,routerboard-lhg-2nd|\
mikrotik,routerboard-sxt-5nd-r2|\
mikrotik,routerboard-wap-g-5hact2hnd|\
@@ -46,6 +44,7 @@ ath79_setup_macs()
label_mac="$mac_base"
lan_mac="$mac_base"
;;
+ mikrotik,routerboard-921gs-5hpacd-15s|\
mikrotik,routerboard-922uags-5hpacd)
label_mac="$mac_base"
lan_mac="$mac_base"
More information about the lede-commits
mailing list