[openwrt/openwrt] ath9k: OF: qca, disable-(2|5)ghz => ieee80211-freq-limit
LEDE Commits
lede-commits at lists.infradead.org
Sat Oct 30 07:33:21 PDT 2021
chunkeey pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/4c8dd973ef8e76f9fc622f0baab981769c89b601
commit 4c8dd973ef8e76f9fc622f0baab981769c89b601
Author: Christian Lamparter <chunkeey at gmail.com>
AuthorDate: Sat Oct 9 20:51:21 2021 +0200
ath9k: OF: qca,disable-(2|5)ghz => ieee80211-freq-limit
OpenWrt maintains two special out-of-tree DT properties:
"qca,disable-5ghz" and "qca,disable-2ghz". These are implemented
in a mac80211 ath9k patch "550-ath9k-disable-bands-via-dt.patch".
With the things being what they are, now might be a good
point to switch the devices to the generic and upstream
"ieee80211-freq-limit" property. This property is much
broader and works differently. Instead of disabling the
drivers logic which would add the affected band and
channels. It now disables all channels which are not
within the specified frequency range.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com> # HH5A
Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
---
...rt-DT-ieee80211-freq-limit-property-to-li.patch | 29 ++++++++++++++++++++++
.../ath9k/550-ath9k-disable-bands-via-dt.patch | 15 -----------
.../mac80211/patches/ath9k/552-ath9k-ahb_of.patch | 8 +-----
target/linux/ath79/dts/ar9342_ubnt_wa.dtsi | 2 +-
target/linux/ath79/dts/ar9344_atheros_db120.dts | 2 +-
target/linux/ath79/dts/ar9344_engenius_exx600.dtsi | 4 +--
target/linux/ath79/dts/ar9344_pcs_cap324.dts | 4 +--
.../mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts | 2 +-
.../mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi | 2 +-
9 files changed, 38 insertions(+), 30 deletions(-)
diff --git a/package/kernel/mac80211/patches/ath9k/040-ath9k-support-DT-ieee80211-freq-limit-property-to-li.patch b/package/kernel/mac80211/patches/ath9k/040-ath9k-support-DT-ieee80211-freq-limit-property-to-li.patch
new file mode 100644
index 0000000000..4142cb6ffd
--- /dev/null
+++ b/package/kernel/mac80211/patches/ath9k/040-ath9k-support-DT-ieee80211-freq-limit-property-to-li.patch
@@ -0,0 +1,29 @@
+From 03469e79fee9e8e908dae3bd1a80bcd9a66f2a88 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey at gmail.com>
+Date: Mon, 11 Oct 2021 18:18:00 +0300
+Subject: ath9k: support DT ieee80211-freq-limit property to limit channels
+
+The common DT property can be used to limit the available channels
+but ath9k has to manually call wiphy_read_of_freq_limits().
+
+I would have put this into ath9k_of_init(). But it didn't work there.
+The reason is that in ath9k_of_init() the channels and bands are not yet
+registered in the wiphy struct. So there isn't any channel to flag as
+disabled.
+
+Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
+Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
+Link: https://lore.kernel.org/r/20211009212847.1781986-1-chunkeey@gmail.com
+---
+--- a/drivers/net/wireless/ath/ath9k/init.c
++++ b/drivers/net/wireless/ath/ath9k/init.c
+@@ -1094,6 +1094,8 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc,
+ ARRAY_SIZE(ath9k_tpt_blink));
+ #endif
+
++ wiphy_read_of_freq_limits(hw->wiphy);
++
+ /* Register with mac80211 */
+ error = ieee80211_register_hw(hw);
+ if (error)
+
diff --git a/package/kernel/mac80211/patches/ath9k/550-ath9k-disable-bands-via-dt.patch b/package/kernel/mac80211/patches/ath9k/550-ath9k-disable-bands-via-dt.patch
deleted file mode 100644
index d1593339d2..0000000000
--- a/package/kernel/mac80211/patches/ath9k/550-ath9k-disable-bands-via-dt.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -625,6 +625,12 @@ static int ath9k_of_init(struct ath_soft
-
- ath_dbg(common, CONFIG, "parsing configuration from OF node\n");
-
-+ if (of_property_read_bool(np, "qca,disable-2ghz"))
-+ ah->disable_2ghz = true;
-+
-+ if (of_property_read_bool(np, "qca,disable-5ghz"))
-+ ah->disable_5ghz = true;
-+
- if (of_property_read_bool(np, "qca,no-eeprom")) {
- /* ath9k-eeprom-<bus>-<id>.bin */
- scnprintf(eeprom_name, sizeof(eeprom_name),
diff --git a/package/kernel/mac80211/patches/ath9k/552-ath9k-ahb_of.patch b/package/kernel/mac80211/patches/ath9k/552-ath9k-ahb_of.patch
index 2552bbc7a1..fce6db2167 100644
--- a/package/kernel/mac80211/patches/ath9k/552-ath9k-ahb_of.patch
+++ b/package/kernel/mac80211/patches/ath9k/552-ath9k-ahb_of.patch
@@ -16,7 +16,7 @@
static const struct platform_device_id ath9k_platform_id_table[] = {
{
-@@ -69,6 +77,242 @@ static const struct ath_bus_ops ath_ahb_
+@@ -69,6 +77,236 @@ static const struct ath_bus_ops ath_ahb_
.eeprom_read = ath_ahb_eeprom_read,
};
@@ -218,12 +218,6 @@
+ else
+ pdata->led_pin = -1;
+
-+ if (of_property_read_bool(pdev->dev.of_node, "qca,disable-2ghz"))
-+ pdata->disable_2ghz = true;
-+
-+ if (of_property_read_bool(pdev->dev.of_node, "qca,disable-5ghz"))
-+ pdata->disable_5ghz = true;
-+
+ if (of_property_read_bool(pdev->dev.of_node, "qca,tx-gain-buffalo"))
+ pdata->tx_gain_buffalo = true;
+
diff --git a/target/linux/ath79/dts/ar9342_ubnt_wa.dtsi b/target/linux/ath79/dts/ar9342_ubnt_wa.dtsi
index 549daace7e..ba0f7ad23e 100644
--- a/target/linux/ath79/dts/ar9342_ubnt_wa.dtsi
+++ b/target/linux/ath79/dts/ar9342_ubnt_wa.dtsi
@@ -78,7 +78,7 @@
&wmac {
status = "okay";
- qca,disable-5ghz;
+ ieee80211-freq-limit = <2402000 2482000>;
mtd-cal-data = <&art 0x1000>;
};
diff --git a/target/linux/ath79/dts/ar9344_atheros_db120.dts b/target/linux/ath79/dts/ar9344_atheros_db120.dts
index f96e31caca..625a8e4fa2 100644
--- a/target/linux/ath79/dts/ar9344_atheros_db120.dts
+++ b/target/linux/ath79/dts/ar9344_atheros_db120.dts
@@ -207,7 +207,7 @@
compatible = "pci168c,0030";
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
- qca,disable-2ghz;
+ ieee80211-freq-limit = <4900000 5990000>;
#gpio-cells = <2>;
gpio-controller;
};
diff --git a/target/linux/ath79/dts/ar9344_engenius_exx600.dtsi b/target/linux/ath79/dts/ar9344_engenius_exx600.dtsi
index 1c318f2083..09dc5806d7 100644
--- a/target/linux/ath79/dts/ar9344_engenius_exx600.dtsi
+++ b/target/linux/ath79/dts/ar9344_engenius_exx600.dtsi
@@ -69,7 +69,7 @@
ath9k: wifi at 0,0,0 {
compatible = "pci168c,0030";
reg = <0x0 0 0 0 0>;
- qca,disable-5ghz;
+ ieee80211-freq-limit = <2402000 2482000>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
@@ -79,7 +79,7 @@
&wmac {
status = "okay";
- qca,disable-2ghz;
+ ieee80211-freq-limit = <4900000 5990000>;
mtd-cal-data = <&art 0x1000>;
};
diff --git a/target/linux/ath79/dts/ar9344_pcs_cap324.dts b/target/linux/ath79/dts/ar9344_pcs_cap324.dts
index 1f15a2e8b8..6ebd6a43bb 100644
--- a/target/linux/ath79/dts/ar9344_pcs_cap324.dts
+++ b/target/linux/ath79/dts/ar9344_pcs_cap324.dts
@@ -123,7 +123,7 @@
mac-address-increment = <(-2)>;
mtd-cal-data = <&art 0x5000>;
qca,no-eeprom;
- qca,disable-5ghz;
+ ieee80211-freq-limit = <2402000 2482000>;
#gpio-cells = <2>;
gpio-controller;
};
@@ -132,7 +132,7 @@
&wmac {
status = "okay";
- qca,disable-2ghz;
+ ieee80211-freq-limit = <4900000 5990000>;
mtd-cal-data = <&art 0x1000>;
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts
index 76cf69335b..1cd0f2c6b6 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts
@@ -256,7 +256,7 @@
compatible = "pci168c,002d";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
- qca,disable-5ghz;
+ ieee80211-freq-limit = <2402000 2482000>;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
index bdf98fe98e..5b7c10bb9d 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
@@ -203,7 +203,7 @@
#gpio-cells = <2>;
gpio-controller;
qca,no-eeprom;
- qca,disable-5ghz;
+ ieee80211-freq-limit = <2402000 2482000>;
nvmem-cells = <&macaddr_ath9k_cal_f100>;
nvmem-cell-names = "mac-address";
mac-address-increment = <2>;
More information about the lede-commits
mailing list