[openwrt/openwrt] bcm53xx: MR32: replace i2c-gpio with SoC's i2c

[LEDE Commits]

chunkeey pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/6102f883ce7f32988d22b7fc5b79356e3d06c1dc

commit 6102f883ce7f32988d22b7fc5b79356e3d06c1dc
Author: Christian Lamparter <chunkeey at gmail.com>
AuthorDate: Sat Sep 12 22:28:38 2020 +0200

    bcm53xx: MR32: replace i2c-gpio with SoC's i2c
    
    During review of the MR32, Florian Fainelli pointed out that the
    SoC has a real I2C-controller. Furthermore, the connected pins
    (SDA and SCL) would line up perfectly for use. This patch swaps
    out the the bitbanged i2c-gpio with the real deal.
    
    Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
---
 target/linux/bcm53xx/image/Makefile                |  2 +-
 ...dts-BCM5301X-Fix-I2C-controller-interrupt.patch | 32 ++++++++
 .../patches-5.10/332-Meraki-MR32-use-hw-i2c.patch  | 85 ++++++++++++++++++++++
 3 files changed, 118 insertions(+), 1 deletion(-)

diff --git a/target/linux/bcm53xx/image/Makefile b/target/linux/bcm53xx/image/Makefile
index cb2643ca54..aadac9c3d4 100644
--- a/target/linux/bcm53xx/image/Makefile
+++ b/target/linux/bcm53xx/image/Makefile
@@ -318,7 +318,7 @@ TARGET_DEVICES += luxul_xwr-3150
 define Device/meraki_mr32
   DEVICE_VENDOR := Meraki
   DEVICE_MODEL := MR32
-  DEVICE_PACKAGES := $(B43) kmod-i2c-bcm-iproc kmod-i2c-gpio kmod-eeprom-at24 \
+  DEVICE_PACKAGES := $(B43) kmod-i2c-bcm-iproc kmod-eeprom-at24 \
 	kmod-leds-pwm kmod-hwmon-ina2xx kmod-bluetooth
   DEVICE_DTS := bcm53016-meraki-mr32
 # Meraki FW r23 tries to resize the part.safe partition before it will
diff --git a/target/linux/bcm53xx/patches-5.10/040-v5.16-ARM-dts-BCM5301X-Fix-I2C-controller-interrupt.patch b/target/linux/bcm53xx/patches-5.10/040-v5.16-ARM-dts-BCM5301X-Fix-I2C-controller-interrupt.patch
new file mode 100644
index 0000000000..628569eca9
--- /dev/null
+++ b/target/linux/bcm53xx/patches-5.10/040-v5.16-ARM-dts-BCM5301X-Fix-I2C-controller-interrupt.patch
@@ -0,0 +1,32 @@
+From beda1bbdb19baa8319ed81fa370fe0c5b91d05df Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli at gmail.com>
+Date: Tue, 26 Oct 2021 11:36:22 -0700
+Subject: [PATCH] ARM: dts: BCM5301X: Fix I2C controller interrupt
+
+The I2C interrupt controller line is off by 32 because the datasheet
+describes interrupt inputs into the GIC which are for Shared Peripheral
+Interrupts and are starting at offset 32. The ARM GIC binding expects
+the SPI interrupts to be numbered from 0 relative to the SPI base.
+
+Fixes: bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT")
+Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
+index f92089290ccd..ec5de636796e 100644
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -408,7 +408,7 @@ uart2: serial at 18008000 {
+ 	i2c0: i2c at 18009000 {
+ 		compatible = "brcm,iproc-i2c";
+ 		reg = <0x18009000 0x50>;
+-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
++		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ 		#address-cells = <1>;
+ 		#size-cells = <0>;
+ 		clock-frequency = <100000>;
+-- 
+2.25.1
+
diff --git a/target/linux/bcm53xx/patches-5.10/332-Meraki-MR32-use-hw-i2c.patch b/target/linux/bcm53xx/patches-5.10/332-Meraki-MR32-use-hw-i2c.patch
new file mode 100644
index 0000000000..acd69edaab
--- /dev/null
+++ b/target/linux/bcm53xx/patches-5.10/332-Meraki-MR32-use-hw-i2c.patch
@@ -0,0 +1,85 @@
+From: Christian Lamparter <chunkeey at gmail.com>
+Date: Sat, 12 Sep 2020 22:11:12 +0200
+Subject: bcm53xx: Meraki MR32 use hw i2c
+
+replace the i2c-gpio provided i2c functionality with the
+hardware in the SoC. This can be activated once the
+internal i2c works as well as the bit-banged i2c-gpio.
+
+Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
+
+--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+@@ -85,40 +85,6 @@
+ 			max-brightness = <255>;
+ 		};
+ 	};
+-
+-	i2c {
+-		/*
+-		 * The platform provided I2C does not budge.
+-		 * This is a replacement until I can figure
+-		 * out what are the missing bits...
+-		 */
+-
+-		compatible = "i2c-gpio";
+-		sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+-		scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+-		i2c-gpio,delay-us = <10>; /* close to 100 kHz */
+-		#address-cells = <1>;
+-		#size-cells = <0>;
+-
+-		current_sense: ina219 at 45 {
+-			compatible = "ti,ina219";
+-			reg = <0x45>;
+-			shunt-resistor = <60000>; /* = 60 mOhms */
+-		};
+-
+-		eeprom: eeprom at 50 {
+-			compatible = "atmel,24c64";
+-			reg = <0x50>;
+-			pagesize = <32>;
+-			read-only;
+-			#address-cells = <1>;
+-			#size-cells = <1>;
+-
+-			mac_address: mac-address at 66 {
+-				reg = <0x66 0x6>;
+-			};
+-		};
+-	};
+ };
+ 
+ &uart0 {
+@@ -196,3 +168,31 @@
+ 		};
+ 	};
+ };
++
++&i2c0 {
++	status = "okay";
++
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinmux_i2c>;
++
++	clock-frequency = <100000>;
++
++	current_sense: ina219 at 45 {
++		compatible = "ti,ina219";
++		reg = <0x45>;
++		shunt-resistor = <60000>; /* = 60 mOhms */
++	};
++
++	eeprom: eeprom at 50 {
++		compatible = "atmel,24c64";
++		reg = <0x50>;
++		pagesize = <32>;
++		read-only;
++		#address-cells = <1>;
++		#size-cells = <1>;
++
++		mac_address: mac-address at 66 {
++			reg = <0x66 0x6>;
++		};
++	};
++};