[openwrt/openwrt] gemini: remove obsolete Kernel 5.4
LEDE Commits
lede-commits at lists.infradead.org
Sat Oct 2 09:23:27 PDT 2021
adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/cac2ca1d4300a52f5d1d4ef603f0cdcc62c1e2e2
commit cac2ca1d4300a52f5d1d4ef603f0cdcc62c1e2e2
Author: Paul Spooren <mail at aparcar.org>
AuthorDate: Fri Oct 1 11:25:57 2021 -1000
gemini: remove obsolete Kernel 5.4
With the upgrade to Kernel 5.10 per default the old version is no longer
required to be in tree.
Signed-off-by: Paul Spooren <mail at aparcar.org>
---
target/linux/gemini/config-5.4 | 461 ---------------------
...b-host-fotg2-add-Gemini-specific-handling.patch | 131 ------
...gment-DIR-685-partition-table-for-OpenWrt.patch | 37 --
.../0003-ARM-dts-gemini-Rename-IDE-nodes.patch | 117 ------
...RM-dts-gemini-Add-thermal-zone-to-DIR-685.patch | 101 -----
5 files changed, 847 deletions(-)
diff --git a/target/linux/gemini/config-5.4 b/target/linux/gemini/config-5.4
deleted file mode 100644
index fcb482aed7..0000000000
--- a/target/linux/gemini/config-5.4
+++ /dev/null
@@ -1,461 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_AMBA_PL08X=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_GEMINI=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-# CONFIG_ARCH_MOXART is not set
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V4T is not set
-CONFIG_ARCH_MULTI_V4_V5=y
-# CONFIG_ARCH_MULTI_V5 is not set
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_SMMU is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_GEMINI=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_FA=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FA=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_CPU_FA526=y
-CONFIG_CPU_NO_EFFICIENT_FFS=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_TLB_FA=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CCM=y
-CONFIG_CRYPTO_CMAC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_GHASH=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZ4=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DMADEVICES=y
-CONFIG_DMATEST=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DRM=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-CONFIG_DRM_GEM_CMA_HELPER=y
-CONFIG_DRM_KMS_CMA_HELPER=y
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ILITEK_IL9322=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_TVE200=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_93CX6=y
-CONFIG_ELF_CORE=y
-# CONFIG_EMBEDDED is not set
-# CONFIG_EXPERT is not set
-CONFIG_EXT4_FS=y
-CONFIG_FARADAY_FTINTC010=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FTTMR010_TIMER=y
-CONFIG_FTWDT010_WATCHDOG=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GEMINI_ETHERNET=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_FTGPIO010=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HDMI=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IPC_NS=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KEYBOARD_DLINK_DIR685=y
-# CONFIG_LDM_DEBUG is not set
-CONFIG_LDM_PARTITION=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_LINUX_MONO is not set
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LZ4_DECOMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MANDATORY_FILE_LOCKING=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_MQ_IOSCHED_DEADLINE=y
-CONFIG_MQ_IOSCHED_KYBER=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_GEMINI=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_NAMESPACES=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_REALTEK_SMI=y
-CONFIG_NET_DSA_VITESSE_VSC73XX=y
-CONFIG_NET_NS=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NVMEM=y
-CONFIG_OABI_COMPAT=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_PATA_FTIDE010=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_FTPCI100=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PID_NS=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_GEMINI=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GEMINI_POWEROFF=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_RATIONAL=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZ4=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RELAY=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RSEQ=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_FTRTC010=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_NVMEM=y
-CONFIG_SATA_GEMINI=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SENSORS_DRIVETEMP=y
-CONFIG_SENSORS_GPIO_FAN=y
-CONFIG_SENSORS_LM75=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_EXAR=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SG_POOL=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SWPHY=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TASKS_RCU=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TREE_SRCU=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USER_NS=y
-CONFIG_USE_OF=y
-CONFIG_UTS_NS=y
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VITESSE_PHY=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/gemini/patches-5.4/0001-usb-host-fotg2-add-Gemini-specific-handling.patch b/target/linux/gemini/patches-5.4/0001-usb-host-fotg2-add-Gemini-specific-handling.patch
deleted file mode 100644
index df68adc66b..0000000000
--- a/target/linux/gemini/patches-5.4/0001-usb-host-fotg2-add-Gemini-specific-handling.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From 3aaff88a0f5e154aa5a489d59fd4015a2a937c23 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Fri, 21 Apr 2017 22:19:00 +0200
-Subject: [PATCH 1/7] usb: host: fotg2: add Gemini-specific handling
-
-The Cortina Systems Gemini has bolted on a PHY inside the
-silicon that can be handled by six bits in a MISC register in
-the system controller.
-
-If we are running on Gemini, look up a syscon regmap through
-a phandle and enable VBUS and optionally the Mini-B connector.
-
-If the device is flagged as "wakeup-source" using the standard
-DT bindings, we also enable this in the global controller for
-respective port.
-
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
----
- drivers/usb/host/Kconfig | 1 +
- drivers/usb/host/fotg210-hcd.c | 76 ++++++++++++++++++++++++++++++++++
- 2 files changed, 77 insertions(+)
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -363,6 +363,7 @@ config USB_ISP1362_HCD
- config USB_FOTG210_HCD
- tristate "FOTG210 HCD support"
- depends on USB && HAS_DMA && HAS_IOMEM
-+ select MFD_SYSCON
- ---help---
- Faraday FOTG210 is an OTG controller which can be configured as
- an USB2.0 host. It is designed to meet USB2.0 EHCI specification
---- a/drivers/usb/host/fotg210-hcd.c
-+++ b/drivers/usb/host/fotg210-hcd.c
-@@ -33,6 +33,10 @@
- #include <linux/platform_device.h>
- #include <linux/io.h>
- #include <linux/clk.h>
-+#include <linux/bitops.h>
-+/* For Cortina Gemini */
-+#include <linux/mfd/syscon.h>
-+#include <linux/regmap.h>
-
- #include <asm/byteorder.h>
- #include <asm/irq.h>
-@@ -5555,6 +5559,72 @@ static void fotg210_init(struct fotg210_
- iowrite32(value, &fotg210->regs->otgcsr);
- }
-
-+/*
-+ * Gemini-specific initialization function, only executed on the
-+ * Gemini SoC using the global misc control register.
-+ */
-+#define GEMINI_GLOBAL_MISC_CTRL 0x30
-+#define GEMINI_MISC_USB0_WAKEUP BIT(14)
-+#define GEMINI_MISC_USB1_WAKEUP BIT(15)
-+#define GEMINI_MISC_USB0_VBUS_ON BIT(22)
-+#define GEMINI_MISC_USB1_VBUS_ON BIT(23)
-+#define GEMINI_MISC_USB0_MINI_B BIT(29)
-+#define GEMINI_MISC_USB1_MINI_B BIT(30)
-+
-+static int fotg210_gemini_init(struct device *dev, struct usb_hcd *hcd)
-+{
-+ struct device_node *np = dev->of_node;
-+ struct regmap *map;
-+ bool mini_b;
-+ bool wakeup;
-+ u32 mask, val;
-+ int ret;
-+
-+ map = syscon_regmap_lookup_by_phandle(np, "syscon");
-+ if (IS_ERR(map)) {
-+ dev_err(dev, "no syscon\n");
-+ return PTR_ERR(map);
-+ }
-+ mini_b = of_property_read_bool(np, "cortina,gemini-mini-b");
-+ wakeup = of_property_read_bool(np, "wakeup-source");
-+
-+ /*
-+ * Figure out if this is USB0 or USB1 by simply checking the
-+ * physical base address.
-+ */
-+ mask = 0;
-+ if (hcd->rsrc_start == 0x69000000) {
-+ val = GEMINI_MISC_USB1_VBUS_ON;
-+ if (mini_b)
-+ val |= GEMINI_MISC_USB1_MINI_B;
-+ else
-+ mask |= GEMINI_MISC_USB1_MINI_B;
-+ if (wakeup)
-+ val |= GEMINI_MISC_USB1_WAKEUP;
-+ else
-+ mask |= GEMINI_MISC_USB1_WAKEUP;
-+ } else {
-+ val = GEMINI_MISC_USB0_VBUS_ON;
-+ if (mini_b)
-+ val |= GEMINI_MISC_USB0_MINI_B;
-+ else
-+ mask |= GEMINI_MISC_USB0_MINI_B;
-+ if (wakeup)
-+ val |= GEMINI_MISC_USB0_WAKEUP;
-+ else
-+ mask |= GEMINI_MISC_USB0_WAKEUP;
-+ }
-+
-+ ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, mask, val);
-+ if (ret) {
-+ dev_err(dev, "failed to initialize Gemini PHY\n");
-+ return ret;
-+ }
-+
-+ dev_info(dev, "initialized Gemini PHY\n");
-+ return 0;
-+}
-+
- /**
- * fotg210_hcd_probe - initialize faraday FOTG210 HCDs
- *
-@@ -5632,6 +5702,12 @@ static int fotg210_hcd_probe(struct plat
-
- fotg210_init(fotg210);
-
-+ if (of_device_is_compatible(dev->of_node, "cortina,gemini-usb")) {
-+ retval = fotg210_gemini_init(dev, hcd);
-+ if (retval)
-+ goto failed_dis_clk;
-+ }
-+
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (retval) {
- dev_err(dev, "failed to add hcd with err %d\n", retval);
diff --git a/target/linux/gemini/patches-5.4/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch b/target/linux/gemini/patches-5.4/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch
deleted file mode 100644
index 39dfd3d535..0000000000
--- a/target/linux/gemini/patches-5.4/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From a2de8560885469f3d76c80207a669029e4fc8a45 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Mon, 11 Mar 2019 15:44:29 +0100
-Subject: [PATCH 2/7] ARM: dts: Augment DIR-685 partition table for OpenWrt
-
-Rename the firmware partition so that the firmware MTD
-splitter will do its job, drop the rootfs arguments as
-the MTD splitter will set this up automatically.
-
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -20,7 +20,7 @@
- };
-
- chosen {
-- bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
-+ bootargs = "console=ttyS0,19200n8 consoleblank=300";
- stdout-path = "uart0:19200n8";
- };
-
-@@ -285,9 +285,9 @@
- * this is called "upgrade" on the vendor system.
- */
- partition at 40000 {
-- label = "upgrade";
-+ compatible = "wrg";
-+ label = "firmware";
- reg = <0x00040000 0x01f40000>;
-- read-only;
- };
- /* RGDB, Residental Gateway Database? */
- partition at 1f80000 {
diff --git a/target/linux/gemini/patches-5.4/0003-ARM-dts-gemini-Rename-IDE-nodes.patch b/target/linux/gemini/patches-5.4/0003-ARM-dts-gemini-Rename-IDE-nodes.patch
deleted file mode 100644
index cf4a74f86a..0000000000
--- a/target/linux/gemini/patches-5.4/0003-ARM-dts-gemini-Rename-IDE-nodes.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From 9b95b301b219df19c20f4a563f1da6338b09b0d0 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Tue, 31 Dec 2019 18:14:28 +0100
-Subject: [PATCH 3/7] ARM: dts: gemini: Rename IDE nodes
-
-By renaming the ATA drive nodes to "ide@" we activate the
-semantic checks to the DT schema for the controller and use
-the correct notation for PATA drives.
-
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 2 +-
- arch/arm/boot/dts/gemini-dlink-dns-313.dts | 2 +-
- arch/arm/boot/dts/gemini-nas4220b.dts | 4 ++--
- arch/arm/boot/dts/gemini-sl93512r.dts | 4 ++--
- arch/arm/boot/dts/gemini-sq201.dts | 2 +-
- arch/arm/boot/dts/gemini.dtsi | 8 ++++++--
- 6 files changed, 13 insertions(+), 9 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -443,7 +443,7 @@
- };
- };
-
-- ata at 63000000 {
-+ ide at 63000000 {
- status = "okay";
- };
-
---- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
-@@ -297,7 +297,7 @@
- };
- };
-
-- ata at 63000000 {
-+ ide at 63000000 {
- status = "okay";
- };
- };
---- a/arch/arm/boot/dts/gemini-nas4220b.dts
-+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
-@@ -170,11 +170,11 @@
- };
- };
-
-- ata at 63000000 {
-+ ide at 63000000 {
- status = "okay";
- };
-
-- ata at 63400000 {
-+ ide at 63400000 {
- status = "okay";
- };
-
---- a/arch/arm/boot/dts/gemini-sl93512r.dts
-+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
-@@ -293,11 +293,11 @@
- };
- };
-
-- ata at 63000000 {
-+ ide at 63000000 {
- status = "okay";
- };
-
-- ata at 63400000 {
-+ ide at 63400000 {
- status = "okay";
- };
-
---- a/arch/arm/boot/dts/gemini-sq201.dts
-+++ b/arch/arm/boot/dts/gemini-sq201.dts
-@@ -289,7 +289,7 @@
- };
- };
-
-- ata at 63000000 {
-+ ide at 63000000 {
- status = "okay";
- };
-
---- a/arch/arm/boot/dts/gemini.dtsi
-+++ b/arch/arm/boot/dts/gemini.dtsi
-@@ -357,7 +357,7 @@
- };
- };
-
-- ata at 63000000 {
-+ ide at 63000000 {
- compatible = "cortina,gemini-pata", "faraday,ftide010";
- reg = <0x63000000 0x1000>;
- interrupts = <4 IRQ_TYPE_EDGE_RISING>;
-@@ -366,9 +366,11 @@
- clock-names = "PCLK";
- sata = <&sata>;
- status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
- };
-
-- ata at 63400000 {
-+ ide at 63400000 {
- compatible = "cortina,gemini-pata", "faraday,ftide010";
- reg = <0x63400000 0x1000>;
- interrupts = <5 IRQ_TYPE_EDGE_RISING>;
-@@ -377,6 +379,8 @@
- clock-names = "PCLK";
- sata = <&sata>;
- status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
- };
-
- dma-controller at 67000000 {
diff --git a/target/linux/gemini/patches-5.4/0004-ARM-dts-gemini-Add-thermal-zone-to-DIR-685.patch b/target/linux/gemini/patches-5.4/0004-ARM-dts-gemini-Add-thermal-zone-to-DIR-685.patch
deleted file mode 100644
index 5949b92be1..0000000000
--- a/target/linux/gemini/patches-5.4/0004-ARM-dts-gemini-Add-thermal-zone-to-DIR-685.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From 2b2e9d0e1ee4765b21c648235489028c6dc7e336 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Tue, 31 Dec 2019 18:18:08 +0100
-Subject: [PATCH 4/7] ARM: dts: gemini: Add thermal zone to DIR-685
-
-The DIR-685 can now exploit the thermal zone added by the
-drive temperature sensor inside the hard drive. We have
-patched the libata subsystem to assign the device nodes
-properly to the SCSI devices and this is what the drivetemp
-driver will use to populate the sensor and the thermal
-zone, so pick that up into the thermal zone and let this
-control the fan.
-
-The hardware lacks an embedded temperature sensor so the
-D-Link vendor firmware uses this method to control the
-temperature of the NAS enclosure using the thermal sensor
-inside the hard drive.
-
-The drive temperature trigger points to be used comes from
-the vendor firmware.
-
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 48 ++++++++++++++++++++--
- 1 file changed, 45 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -119,13 +119,11 @@
-
- /*
- * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM.
-- * Since the platform has no temperature sensor, this is controlled
-- * from userspace by using the hard disks S.M.A.R.T. temperature
- * sensor. It is turned on when the temperature exceeds 46 degrees
- * and turned off when the temperatures goes below 41 degrees
- * (celsius).
- */
-- gpio-fan {
-+ fan0: gpio-fan {
- compatible = "gpio-fan";
- /* Collides with IDE */
- gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-@@ -133,6 +131,40 @@
- #cooling-cells = <2>;
- };
-
-+ thermal-zones {
-+ chassis-thermal {
-+ /* Poll every 20 seconds */
-+ polling-delay = <20000>;
-+ /* Poll every 2nd second when cooling */
-+ polling-delay-passive = <2000>;
-+ /* Use the thermal sensor in the hard drive */
-+ thermal-sensors = <&drive0>;
-+
-+ /* Tripping points from the fan.script in the rootfs */
-+ trips {
-+ alert: chassis-alert {
-+ /* At 43 degrees turn on the fan */
-+ temperature = <43000>;
-+ hysteresis = <3000>;
-+ type = "active";
-+ };
-+ crit: chassis-crit {
-+ /* Just shut down at 60 degrees */
-+ temperature = <60000>;
-+ hysteresis = <2000>;
-+ type = "critical";
-+ };
-+ };
-+
-+ cooling-maps {
-+ map0 {
-+ trip = <&alert>;
-+ cooling-device = <&fan0 1 1>;
-+ };
-+ };
-+ };
-+ };
-+
- /*
- * The touchpad input is connected to a GPIO bit-banged
- * I2C bus.
-@@ -445,6 +477,16 @@
-
- ide at 63000000 {
- status = "okay";
-+
-+ /*
-+ * This drive may have a temperature sensor with a
-+ * thermal zone we can use for thermal control of the
-+ * chassis temperature using the fan.
-+ */
-+ drive0: ide-port at 0 {
-+ reg = <0>;
-+ #thermal-sensor-cells = <0>;
-+ };
- };
-
- display-controller at 6a000000 {
More information about the lede-commits
mailing list