[openwrt/openwrt] ramips: add support for cudy WR2100
LEDE Commits
lede-commits at lists.infradead.org
Wed May 26 14:12:38 PDT 2021
blocktrron pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/3501db9b9b4a71ae52c539b46af817783c327866
commit 3501db9b9b4a71ae52c539b46af817783c327866
Author: Leon M. George <leon at georgemail.eu>
AuthorDate: Thu Dec 24 11:32:47 2020 +0100
ramips: add support for cudy WR2100
Specifications
SoC: MT7621
CPU: 880 MHz
Flash: 16 MiB
RAM: 128 MiB
WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac
MT7603E / MT7615E
Ethernet: 5x Gbit ports
Installation
There are two known options:
1) The Luci-based UI.
2) Press and hold the reset button during power up.
The router will request 'recovery.bin' from a TFTP server at
192.168.1.88.
Both options require a signed firmware binary.
The openwrt image supplied by cudy is signed and can be used to
install unsigned images.
R4 & R5 need to be shorted (0-100Ω) for the UART to work.
Signed-off-by: Leon M. George <leon at georgemail.eu>
[remove non-required switch-port node - remove trgmii phy-mode]
Signed-off-by: David Bauer <mail at david-bauer.net>
---
target/linux/ramips/dts/mt7621_cudy_wr2100.dts | 201 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 10 +
.../ramips/mt7621/base-files/etc/board.d/01_leds | 7 +
3 files changed, 218 insertions(+)
diff --git a/target/linux/ramips/dts/mt7621_cudy_wr2100.dts b/target/linux/ramips/dts/mt7621_cudy_wr2100.dts
new file mode 100644
index 0000000000..692c94da55
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_cudy_wr2100.dts
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "cudy,wr2100", "mediatek,mt7621-soc";
+ model = "Cudy WR2100";
+
+ aliases {
+ led-boot = &led_internet_blue;
+ led-failsafe = &led_internet_blue;
+ led-running = &led_internet_blue;
+ led-upgrade = &led_internet_blue;
+ label-mac-device = &gmac0;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_internet_blue: internet_blue {
+ label = "blue:internet";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ internet_red {
+ label = "red:internet";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gmac0 {
+ mtd-mac-address = <&bdinfo 0xde00>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ ieee80211-freq-limit = <2400000 2500000>;
+ };
+};
+
+&pcie1 {
+ wifi at 1,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition at fd0000 {
+ label = "debug";
+ reg = <0xfd0000 0x10000>;
+ read-only;
+ };
+
+ partition at fe0000 {
+ label = "backup";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+
+ bdinfo: partition at ff0000 {
+ label = "bdinfo";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "i2c", "jtag", "uart2", "uart3", "wdt";
+ function = "gpio";
+ };
+};
+
+&switch0 {
+ ports {
+ port at 0 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port at 1 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port at 2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port at 3 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port at 4 {
+ status = "okay";
+ label = "wan";
+
+ mtd-mac-address = <&bdinfo 0xde00>;
+ mtd-mac-address-increment = <1>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 9ff066c8c3..1ae49cb96e 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -240,6 +240,16 @@ define Device/cudy_wr1300
endef
TARGET_DEVICES += cudy_wr1300
+define Device/cudy_wr2100
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := Cudy
+ DEVICE_MODEL := WR2100
+ IMAGE_SIZE := 15872k
+ UIMAGE_NAME := R11
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware
+endef
+TARGET_DEVICES += cudy_wr2100
+
define Device/dlink_dir-8xx-a1
$(Device/dsa-migration)
IMAGE_SIZE := 16000k
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 5855b469e3..427983e44b 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -11,6 +11,13 @@ asus,rt-n56u-b1)
ucidef_set_led_netdev "lan" "LAN link" "blue:lan" "br-lan"
ucidef_set_led_netdev "wan" "WAN link" "blue:wan" "wan"
;;
+cudy,wr2100)
+ ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1"
+ ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2"
+ ucidef_set_led_netdev "lan3" "lan3" "green:lan3" "lan3"
+ ucidef_set_led_netdev "lan4" "lan4" "green:lan4" "lan4"
+ ucidef_set_led_netdev "wan" "wan" "green:wan" "wan"
+ ;;
d-team,newifi-d2)
ucidef_set_led_netdev "internet" "internet" "amber:internet" "wan"
ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "blue:wlan2g" "wlan0"
More information about the lede-commits
mailing list